How To Determine, Inside A Function, If A Linked-server-query Returned Results
Feb 13, 2004
Hi, have configured an ODBC linked server for an Adaptive Server Anywhere (ASA6.0) database.
I have to write a function (not a procedure) that receives a number (@Code) and returns 1 if it was found on a table in the linked server, or 0 if not. Looks very simple...
One problem, is that the queries on a linked-server must be made through the OPENQUERY statement, which doesen't support dynamic parameters. I've solved this making the whole query a string, and executing it, something like this:
SET @SQL='SELECT * FROM OPENQUERY(CAT_ASA, ''SELECT code FROM countries WHERE code=' + @Code + ''')'
EXEC sp_executesql @SQL
(CAT_ASA is the linked-server's name)
Then, i would use @@ROWCOUNT to determine if the code exists or not. But before this, a problem appears: sp_executesql is not allowed within a function (only extended procedures are allowed).
Does somebody know how to make what i want?? I prefer to avoid using temporary tables.
Thanks!
View 3 Replies
ADVERTISEMENT
Feb 26, 2007
Hello,
I have a linked server named 'Charlie_File' to an Excel Workbook that I set up in SQLServer 2005 Management Studio. The workbook is on my local C drive. Sometimes, I get the results back that I expect when I run the following query;
SELECT * FROM OPENQUERY(Charlie_file, 'SELECT * FROM [Feb$]')
Sometimes, on subsequent runs of the above query, I get the following message;
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "MSDASQL" for linked server "Charlie_file" reported an error. The provider did not give any information about the error.
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "Charlie_file".
There seems to be about a minute or so of a delay before the query will run correctly on subsequent attempts. Is there a connection issue here where a connection blocks subsequent attempts to select the data within a specific time span?
Thank you for your help!
cdun2
View 1 Replies
View Related
Jan 24, 2012
I am getting the following results from my query that contains a subquery, but I don't understand why the values in the [Total Volume M_Active_Previous] are being repeated with the same value. I should be getting different values returned for each row like in the [Total Volume M_Active] column.
Why the values are all the same and how I can fix this?
DayNoDayTotal Volume M_ActiveTotal Volume M_Active_Previous
6 Friday11161 72491
7 Saturday5687 72491
2 Monday14354 72491
1 Sunday3966 72491
4 Wednesday12340 72491
3 Tuesday12018 72491
5 Thursday11833 72491
Here is the SQL I'm using.
Code:
DECLARE @StartDate datetime, @EndDate datetime, @Prev_StartDate datetime, @Prev_EndDate datetime
SET @StartDate = '2011-03-13 00:00:00.000'
SET @EndDate = '2011-03-19 23:59:59.999'
SET @Prev_StartDate = '2011-03-06 00:00:00.000'
SET @Prev_EndDate = '2011-03-12 23:59:59.999'
[Code] ....
View 5 Replies
View Related
Apr 17, 2007
Dear Friends,
I need to execute a SQL query, inside a dataflow (not in controlFlow) and need the records returned to continue the dataflow... In my case I cant use lookup and OLE DB COmmand and nothing else...
I need to execute a query and need the records for dataflow... with OLE DB command I cant see the fields returned... :-(
How can I do it? Using a script? Can I use a Script Component? That receive 2 parameters for input and give me the fields returned from query as output?
Thanks!!
View 38 Replies
View Related
May 28, 2008
Hello,
when trying to execute the following query with SQL CE 3.1 and OLEDB on WM2003:
SELECT C.Panel_Id, C.Panel_Tier, C.Panel_Type, C.Panel_No, C.Panel_Position
FROM tblMeasurements AS A, tblAssignment_Ant_Pan AS B, tblPanels AS C
WHERE (A.Measurement_No=?) AND (A.Antenna_No = B.Antenna_No) AND (B.Panel_Id = C.Panel_Id) AND C.Panel_Position in
(SELECT Panel_Position FROM tblMeasurement_Results
WHERE (Measurement_No=?) AND ABS(Measurement_Value) BETWEEN ? AND ?
GROUP BY Panel_Position)
i get this error returned:
0x80040E1DL -- DB_E_UNSUPPORTEDCONVERSION -- Requested conversion is not supported.
I don't know where inside the sql string a conversion is necessary/fails.
Surprisingsly when i modify the sql statement a little, it is executed WITHOUT ERRORS:
SELECT C.Panel_Id, C.Panel_Tier, C.Panel_Type, C.Panel_No, C.Panel_Position
FROM tblMeasurements AS A, tblAssignment_Ant_Pan AS B, tblPanels AS C
WHERE (A.Measurement_No=?) AND (A.Antenna_No = B.Antenna_No) AND (B.Panel_Id = C.Panel_Id) AND C.Panel_Position in
(SELECT Panel_Position FROM tblMeasurement_Results
WHERE (Measurement_No=?) AND Measurement_Value BETWEEN ? AND ?
GROUP BY Panel_Position)
The only difference between the 2 statements is the ABS() function inside the sub query.
More surprisingly, with the query analyser on the PDA i can execute both statements fine. I am absolutely confused now where i have to search for the mistake.
I would appreciate it very much if someone out there knows an answer or a hint and could tell me.
With kind regards,
Andre
View 5 Replies
View Related
Aug 17, 2007
I have created an assembly with permission set safe, and a function inside the assembly.
The function reads data from the same SQL Server as it is running inside. For connection I use the "Context connection = true", and the function has the SystemDataAccessKind attribute set to Read.
However when I execute my CLR function I get an error saying something like:
"The request for permission of type System.Data.SqlClient.SqlClientPermission...... failed"
I do, as the login user, have been granted the necessary rights, so I don't believe this is the answer to the error.
And my .dll is also signed.
Has this something to do with writing something a config file?
I have had simular problems with reporting services but fixed them by entering a node in the rspolicy.config file. If this is the case here - which .config file should i modify...machine.config?
View 6 Replies
View Related
May 26, 2015
I can find many examples of loading DBCC results into tables. They all begin with a create table statement defining the results. My question is , other than trial and error, is there a way to determine what data types will be returned. Sure you can say that first element looks like an integer, but is it really a bigint, and that text string can be varchar(max) but will char(2) work.
I'm not looking for an answer for a specific DBCC function, but rather a generic way I can determine the characteristics of any DBCC result set.
I tried
SELECT *
INTO #tmp
FROM OPENROWSET('SQLOLEDB',
'Server=ray;Trusted_Connection=Yes;Database=Ed_sandbox',
'Set FmtOnly OFF; DBCC loginfo WITH tableresults ')
but I got back
Msg 11527, Level 16, State 1, Procedure sp_describe_first_result_set, Line 1
The metadata could not be determined because statement 'DBCC loginfo WITH tableresults' does not support metadata discovery.
View 1 Replies
View Related
Apr 11, 2008
Hi
i am try to execute a command " SELECT * FROM [SQLSERVER].[DATABASENAME].[DBO].[TABLE] ".. but i am receiving a error message
Msg 7319, Level 16, State 1, Line 19
The OLE DB provider "SQLNCLI" for linked server "SQLSERVER" returned a "NON-CLUSTERED and NOT INTEGRATED" index "MSmerge_index_1348915877" with the incorrect bookmark ordinal 0.
but when i try to check the linked server it's shows me the linked is okay.. The following command i use to check wethare the link is fine or not..
CREATE TABLE #foo
(
pingResult SYSNAME NULL
);
INSERT #foo
EXEC master..xp_cmdshell
'ping SQLSERVER;
IF EXISTS
(
SELECT 1
FROM #foo
WHERE pingResult LIKE '%TTL%'
)
BEGIN
PRINT 'Feel free to use linked server.';
END
ELSE
BEGIN
PRINT 'Linked server not available.';
END
DROP TABLE #foo;
and Following result i receive..
(13 row(s) affected)
Feel free to use linked server.
Can any One tells me where i m making mistake or how can i resolve this problem
View 5 Replies
View Related
Jul 14, 2015
Inside my sp on the Primary server are 3 commands:
exec msdb..sp_start_job @job_name = N'JobA' --
Running on Primary ServerEXEC Server2.msdb.dbo.sp_start_job @job_name = N'JobB';Running on Secondary ServerSelect * from Server2.Table --
Running on Secondary Server
So far the commands are working just fine when I kick them off one at a time. But when I kick off the sp as a whole I notice that the timing just isn't keeping up. For instance, Step 3 is running before Step 2 is finished. It appears that as the Primary Server kicks off Step 2, it doesn't seem to care about the outcome and moves right to Step 3 which in turn provides me erroneous data.How can I get Step 3 to wait until Step 2 is actually finished keeping in mind the Secondary server is part of this equation?
View 13 Replies
View Related
Apr 8, 2008
help with solution for use order BY inside function and VIEW on the sql server
i explain the problem
i am a web developer in asp page
i BUY an DATA grid object for my web site
the problem in this object i can use only ONE field to use ORDER BY
can i store in the sql server function and VIEW that change the ORDER of the result inside the sql server ?
so whan i do
SELECT *
FROM dbo.tb_pivot_big
the sql server ORDER for ME the result and run this (inside the sql server )
Code Snippet
SELECT *
FROM dbo.tb_pivot_big
ORDER BY new_unit, Fname ASC, val_orginal desc
TNX for help
View 14 Replies
View Related
Aug 14, 2007
Hi All,
I have a strange problem with one of my Linked server connections. I am connecting from
SQL Server 2005 Standard Edition (9.00.3042.00) to and Oracle 10g database using the Microsoft OLE DB Provider for Oracle. The connection works and I am able to select from all the Oracle tables except for 1 table. When selecting from this table I get the following error:
OLE DB provider "MSDAORA" for linked server "DBNAME" returned message "ORA-01476: divisor is equal to zero".
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "MSDAORA" for linked server "DBNAME".
This probem happens if the table has rows or has no rows (empty table).
I have tried SELECT * and count(*) along with selecting a specific column from the table.
I can use SQL*plus from the system that the SQL database server running on it and select from the table using the same login/password that the linked server uses to rule out a permissions problem.
Any suggestions on what I can try next?
Thanks.
View 3 Replies
View Related
Aug 13, 2007
Window Server 2003 R2 Standard Edition (x64) SP1
Sql Server 2000 8.00.2039 SP4 Enterprise Edition (32 bit version)
A linked server is configured to a sql 2000 server and when I execute sql statement SELECT * FROM [LinkedServer].[Database].[dbo].[TableName] it gives following error message: -
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'SQLOLEDB' reported an error. The provider did not give any information about the error.
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' IUnknown::QueryInterface returned 0x80004005: The provider did not give any information about the error.].
In case if anyone has a solution to it, please let me know.
View 3 Replies
View Related
Jun 20, 2006
I have a strange problem. I have some code that executes a sql query. If I run the query in SQL server query analyzer, I get a set of data returned for me as expected. This is the query listed on lines 3 and 4. I just manually type it into query analyzer.
Yet when I run the same query in my code, the result set is slightly different because it is missing some data. I am confused as to what is going on here. Basically to examine the sql result set returned, I write it out to an XML file. (See line 16).
Why the data returned is different, I have no idea. Also writing it out to an XML file is the only way I can look at the data. Otherwise looking at it in the debugger is impossible, with the hundreds of tree nodes returned.
If someone is able to help me figure this out, I would appreciate it.
1. public DataSet GetMarketList(string region, string marketRegion)2. {3. string sql = @"SELECT a.RealEstMarket FROM MarketMap a, RegionMap b " + 4."WHERE a.RegionCode = b.RegionCode"; 5. DataSet dsMarketList = new DataSet();6. SqlConnection sqlConn = new SqlConnection(intranetConnStr); 7. SqlCommand cmd = new SqlCommand(sql,sqlConn);8. sqlConn.Open();9. SqlDataAdapter adapter = new SqlDataAdapter(cmd); 10. try11. {12. adapter.Fill(dsMarketList);
13. String bling = adapter.SelectCommand.CommandText;//BRG 14. dsMarketList.DataSetName="RegionMarket"; 15. dsMarketList.Tables[0].TableName = "MarketList"; 16. dsMarketList.WriteXml(Server.MapPath ("myXMLFile.xml" )); // The data written to 17. myXMLFile.xml is not the same data that is returned when I run the query on line 3&4 18. // from the SQL query 19. } 20. catch(Exception e) 21. { 22. // Handle the exception (Code not shown)
View 2 Replies
View Related
Oct 26, 2007
In our system, we need to execute queries using linked servers. However, the linked server name is not well known, it is a value stored in the system. Is there a way this can be done?
CREATE FUNCTION dbo.stfGetSupervisorOrgUnitAssignments(@SupervisorID INT)
RETURNS @ReturnTable TABLE(Org_Unit INT PRIMARY KEY)
AS
BEGIN
DECLARE @Server VARCHAR(100)
SELECT @Server = dbo.stfGetLinkedServerName()
INSERT INTO @ReturnTable(Org_Unit)
SELECT ReplicationID FROM OPENQUERY(@Server, '....')
END
Any help would be greatly appreciated.
View 6 Replies
View Related
Oct 16, 2007
Hi,
I've got what is probably a simple question, but for the life of me I cannot figure it out and it is starting to do my head in . I have the following query:-
Select e.intEmployeeID AS ID, e.txtFirstName AS [First Name], e.txtLastName As [Last Name], e.txtMobile As [Mobile], i.txtWorkEmail as from EMPLOYEE AS e INNER JOIN EMPLOYEE_INFORMATION AS i ON i.intEmployeeID = e.intEmployeeID WHERE (((e.blnActive = -1) AND (e.txtFirstName Like '%b%')) OR ((e.blnActive = -1) AND (e.txtLastName Like '%b%')) ) ORDER By e.txtFirstName
In my database, the field blnActive is a BIT field. When I try to run this query, I get no results returned. If I remove the (e.blnActive = -1) WHERE statement segment, I get the correct results. The field blnActive contains -1 for every record but I cannot work out why it will not return these records .... aaarrrrggghhhh
Thanks to those who feel my pain !!
View 2 Replies
View Related
Jun 15, 2007
I'm trying to find the command to open up an odbc conection inside sql2005 express. I only have ues of an odbc connector, we're conection to remedy. We will eventually be using stored procedures to extract the data we need from remedy and doing additional data crunching. I'm a foxpro programmer so once I get the correct syntax for making the odbc connector I shold be ok. Also I need a really good advanced book on sql2005. The type of book that would have my odbc answer. I've spent all morning trying to find this information and was unable to.
Thanks in advance
Daniel Buchanan.
If this was the wrong forum to post this on, please move this question to the correct one. I need this answer soon.
View 1 Replies
View Related
Jul 20, 2005
I have my own function, which I can use:declare @dt as datetimeselect @dt='20040121 12:22:33'select * from index_gold_iif(@dt)When I try do it from linked serwer:declare @dt as datetimeselect @dt='20040121 12:22:33'select * fromlewiatan.e_.dbo.index_gold_iif(@dt)I have massage:Server: Msg 170, Level 15, State 31, Line 2Line 4: Incorrect syntax near '('.Did server can't see function from linked server? Is it true or I have donesome error (what)?MarekPS. all done as "sa" user, linked server linked with sa account
View 3 Replies
View Related
Oct 16, 2006
Hi all - i'm trying to put together my first .Net web page (have switched from Dreamweaver to VWD - VWD keeps swapping my tab-indents for spaces, and none of the options stop it!).Here's a table that i'm trying to query: ItemID | ReviewRating | ReviewRatingOutOfAs i'm sure you've guessed, it's a reviews table, where there can be several records with the same ItemID and different (or the same) ReviewRating and ReviewRatingOutOf's. As the reviews are collected from lots of sources, the ReviewRatingOutOf will change (one review might be 3/5, while the next, for the same ItemID, could be 8/10, etc). Now, what i'm trying to do is return a list of ItemID's ordered by their RATIO (which is the sum of each ItemID's ReviewRating's divided by the sum of each ItemID's ReviewRatingsOutOf's - in other words, average score). My first guess was this:"SELECT DISTINCT ItemID FROM Reviews ORDER BY SUM(ReviewRating)/SUM(ReviewRatingOutOf)" - unfortunately that doesn't work (problems with the SUM aggregate functions, and overflow errors, whatever they are). Now, this string works: "SELECT ItemID FROM Reviews GROUP BY ItemID ORDER BY SUM(ReviewRating)" - right now, that just adds up the ReviewRatings, so an item with 10 reviews that only got awarded 1/5, 1/10, 1/8, etc (all 1's, therefore achieving a combined ReviewRating of 10 out of a very much higher ReviewRatingOutOf), would appear higher than an item with 1 review that got 5/5. Making the string into this: "SELECT ItemID FROM Reviews GROUP BY ItemID ORDER BY SUM(ReviewRating)/SUM(ReviewRatingOutOf)" (which is what I need), unfortunately gives me errors...Anyone have any ideas? Is there possibly a way to simply read all the distinct ItemID's with SQL, then get the two SUM's for each ItemID, then calculate the ratio of the two SUM's, and stick the ItemID's and the ratio into some sort of array, and have C# order the array for me, based on the ratio? I'd appreciate an example of that if possible, as i'm a complete C# beginner :-)Thanks in advance!
View 7 Replies
View Related
Sep 2, 2004
I am doing some SELECT queries on my database through ASP, but for example, I only want to return the 50 most recent entries that match the criteria. Is there any easy way to limit the number of results returned?
View 1 Replies
View Related
Oct 17, 1999
Greetings,
Facing a strange problem, but obviously not expected earlier on, I am trying to execute a stored procedure via ADO which refrences a linked server table and I get an error specifying
"
OLEDB provider SQLOLEDB does not contain table "<DatabaseName>"."<owner>"."<tableName>"
"
Has any one else encountered this problem before ?
regards
Govind
View 1 Replies
View Related
May 17, 2007
Iam using front page to dispalay my results.
At the bottom it shows me 1/10 i.e 1st page of 10 pages.
but what do i do if i want it to be shown as 1-10 out of 100 (if each page contains 10 results).
or it would be really good if i get count of both no. of recors as well as no. of pages.
View 2 Replies
View Related
Jan 8, 2004
I am trying to pull results from an SQL Server DB into an dataset where a particular field (SMALLDATETIME) is within a particular date range. The code I was using worked fine when the database was in Access. I have made several changes already but am still getting 0 results returned when there is data that should be returned.
I was using in Access:
Dim StrSQL = "SELECT ID FROM myTable WHERE myDateField>=#" & startDate & "# AND myDateField<=#" & stopDate & "# ORDER BY ID"
I have changed this for SQL Server to:
Dim StrSQL = "SELECT ID FROM myTable WHERE myDateField>='01/01/2003 00:00:01' AND myDateField<='01/01/2004 23:59:59' ORDER BY ID"
But I am always returned 0 results even if the date range should return plenty of data. I have also tried using the BETWEEN structure with the same result.
Is there a particular format for the date I am comparing with?
Am I missing something else in my query?
The connection / permissions and everything else are correct as I can read and write data to the database in numerous other pages. It is just this date comparison that is not working.
Many thanks for any help or comments you can provide.
View 2 Replies
View Related
Oct 22, 2007
Hi,
I'm trying to use the XML Task XPath operation for the first time but having some problems. I'm using the following settings:
Source type: File connection
SaveOperationResult: True (file destination)
SecondOperandType: Direct Input
PutResultInOneNode: False
XPathOperation: Values
The XML file I'm testing has the following stucture:
<?xml version="1.0" standalone="yes"?>
<BackupDataSet xmlns="http://tempuri.org/BackupDataSet.xsd">
<Device>
<DeviceID>6356452a-e7a6-42e1-895a-d4ade62210d5</DeviceID>
<UserID>1533c44f-c263-db11-9db3-000e9bd9f98d</UserID>
</Device>
</BackupDataSet>
When I set the SecondOperand to /* the output is a concatenated text string of DeviceID and UserID values. I'm trying to get just the DeviceID but perhaps my understanding of XPath syntax is wrong. I've tried setting the SecondOperand to the following:
//Device/DeviceID
/BackupDataSet/Device/DeviceID
//DeviceID
All of these return no results. What am I doing wrong?
Regards,
Greg
View 3 Replies
View Related
Sep 10, 2015
I have two tables A and B, A has 8000 and B has 8122 records. I want to see what records are missing. I tried EXCEPT and it returned zero rows. I used where non exists also still no records.
View 5 Replies
View Related
Sep 10, 2007
I have the follow table.
/****** Object: Table [dbo].[deletethisTempOut] Script Date: 09/10/2007 09:20:12 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[deletethisTempOut](
[ThemeName] [varchar](60) NULL,
[intLocationCount] [int] NULL,
[dblRepValueA] [float] NULL,
[dblRepValueB] [float] NULL,
[dblRepValueC] [float] NULL,
[dblRepValueD] [float] NULL,
[dblTotalRepValue] [float] NULL,
[dblLimit1] [float] NULL,
[dblLimit2] [float] NULL,
[dblLimit3] [float] NULL,
[dblLimit4] [float] NULL,
[dblTotalLimit] [float] NULL,
[fltEmployeecount] [float] NULL,
[intAreaLevel1] [tinyint] NOT NULL,
[strFullName] [varchar](13) NOT NULL,
[strAreaLevel2] [varchar](20) NOT NULL,
[strAreaLevel3] [varchar](20) NOT NULL
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
If I use the following SQL:
SELECT ThemeName, intLocationCount, dblRepValueA, dblRepValueB, dblRepValueC, dblRepValueD, dblTotalRepValue, dblLimit1, dblLimit2, dblLimit3,
dblLimit4, dblTotalLimit, fltEmployeecount, intAreaLevel1, strFullName, strAreaLevel2, strAreaLevel3
FROM deletethisTempOut
ORDER BY strAreaLevel2, strAreaLevel3
GET Following correct results:
Adair
284
899989594
0
574857716
190479902
1665327212
0
0
0
0
1665327212
0
1
United States
1
1
IF I use the following SQL I get the wrong results:
SELECT ThemeName, intLocationCount, dblRepValueA, dblRepValueB, dblRepValueC, dblRepValueD, dblTotalRepValue, dblLimit1, dblLimit2, dblLimit3,
dblLimit4, dblTotalLimit, fltEmployeecount, intAreaLevel1, strFullName, strAreaLevel2, strAreaLevel3
FROM deletethisTempOut
ORDER BY ThemeName
WRONG results:
Adair
74
81733110
0
49616018
24671651
156020779
50510500
0
0
0
203870779
0
1
United States
50
1
Adair
437
1468698657
0
495479839
353202768
2317381264
12984266
0
0
0
2315676030
0
1
United States
25
1
Adair
1813
20309722045
0
6597005374
4253819645
31160547064
43636703
0
0
0
31135010742
0
1
United States
11
1
Adair
606
439581417
0
331746662
132240332
903568411
0
0
0
0
903568411
0
1
United States
45
1
Adair
236
350256381
0
524269553
504973831
1379499765
4080368
0
0
0
1380473415
0
1
United States
23
1etc.....
View 6 Replies
View Related
Nov 3, 2005
I am using sql 2005 beta
View 23 Replies
View Related
Nov 1, 2014
I have rather simple CLR function:
[SqlFunction(IsDeterministic = true, DataAccess = DataAccessKind.None)]
public static SqlString GetUserName()
{
return (SqlString)WindowsIdentity.GetCurrent().Name;
}
When I get result from .NET console app, I get correct answer "JungleSektor". However, when SQL Server executes this code, it gives me "NT ServiceMSSQL $ SQL2014". How to get correct result?
View 1 Replies
View Related
Mar 16, 2007
Could anyone shed some light on the syntax of accessing system function on a linked server?I'm trying to get the recovery models of databases on a linked. However using databasepropertyex locally generates wrong results.e.g. select databasepropertyex(name, 'recovery') RecoveryModel from [server/databasename].master.dbo.SysDatabases I tried select [server/databasename].databasepropertyex(name, 'recovery') RecoveryModel from [server/databasename].master.dbo.SysDatabases which does not work. Thanks.
View 1 Replies
View Related
Nov 23, 2006
I have a Progress DB set up as a linked server.
To get the data through to SQL Server 2005 in a useable format i need to use the progress PRO_ELEMENT function call. How do I delimit this so it gets passed to the progress DB.
I've tried
SELECT
{fn PRO_ELEMENT(fldarr1,1,1)} as fld1
from ls1..pub.tab
This just returns an unknown function message which I believe is on the SQL Server end of the call.
This statement works fine through Business Objects.
Any help greatfully received.
View 2 Replies
View Related
Oct 18, 2006
Stored Procedure ProblemThis is probably a simple problem but i would appreciate some help.I have a stored procedure that takes the order date time plus other information fromvarious tables but the information is being returned double:ie 4 rows are being returned instead of two. Can anyone see where i am going wrong?Many thanksMartinThis is the stored procedureALTER PROCEDURE dbo.SP_RetrieveOrdersASSELECT distinct OD.DateCreated, O.OrderID,O.UserID,O.OrderTotal,O.Sent,O.Delivered,O.Paid,C.CustomerNameFROM Orders As O,Customers As C,OrderDetails as ODWHERE O.UserID=C.UserID And O.OrderTotal >0 RETURNThese are the results that are returnedDateCreated OrderID UserID OrderTotal Sent Delivered Paid CustomerName ----------------------- ----------- ------------------------------------ ---------------- ------ --------- ------ --------------- 18/10/2006 14:49:00 41 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 500 <NULL> <NULL> <NULL> bill 18/10/2006 14:49:00 42 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 590 <NULL> <NULL> <NULL> bill 18/10/2006 15:05:00 41 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 500 <NULL> <NULL> <NULL> bill 18/10/2006 15:05:00 42 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 590 <NULL> <NULL> <NULL> bill No rows affected.(4 row(s) returned)If I leave OD.DateCreated ie use ALTER PROCEDURE dbo.SP_RetrieveOrdersASSELECT distinct O.OrderID,O.UserID,O.OrderTotal,O.Sent,O.Delivered,O.Paid,C.CustomerNameFROM Orders As O,Customers As C,OrderDetails as ODWHERE O.UserID=C.UserID And O.OrderTotal >0 RETURNthen there is no problem. I get:41 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 500 <NULL> <NULL> <NULL> bill 42 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 590 <NULL> <NULL> <NULL> bill No rows affected.(2 row(s) returned)
View 2 Replies
View Related
Nov 6, 2006
Hi,
I need to write a select query that will run all returned results through a separate stored procedure before returning them to me.
Something like....
SELECT TOP 10 userid,url,first name FROM USERS ORDER by NEWID()
......and run all the selected userids through a stored procedure like.....
CREATE PROCEDURE AddUserToLog (@UserID int ) AS INSERT INTO SelectedUsers (UserID,SelectedOn) VALUES (@UserID,getdate())
Can anyone help me to get these working togethsr in the same qurey?
Thanks
View 7 Replies
View Related
May 21, 2008
Hi guys,
I am trying to call a function from a remote sql server (linked server) using the following syntax:
select [ServerName].[dbName].dbo.CLRHelloWorld('SomeMessage'). I am getting the following error:
The object name '[ServerName].[dbName].dbo.' contains more than the maximum number of prefixes. The maximum is 2.
I need to call this function remotely and using this syntax; I don't want to use OPENQUERY...
Any hints?
Yousef
View 4 Replies
View Related
May 26, 2008
Just wonder whether is there any indicator or system parameters that can indicate whether stored procedure A is executed inside query analyzer or executed inside application itself so that if execution is done inside query analyzer then i can block it from being executed/retrieve sensitive data from it?
What i'm want to do is to block someone executing stored procedure using query analyzer and retrieve its sensitive results.
Stored procedure A has been granted execution for public user but inside application, it will prompt access denied message if particular user has no rights to use system although knew public user name and password. Because there is second layer of user validation inside system application.
However inside query analyzer, there is no way control execution of stored procedure A it as user knew the public user name and password.
Looking forward for replies from expert here. Thanks in advance.
Note: Hope my explaination here clearly describe my current problems.
View 4 Replies
View Related
