How do I display multiple parameter values on report page from a multi-value report parameter. For example, I have a report parameter where users can select multiple attendance codes and I want them displayed at the top of the report after it's run.
Currently, only the first value is showing on the report.
Thanks.
Here's tricky one.
I have a fairly complex report that was given to me that was hard coded for single parameters. There is a dropdown for each market (created from a query in SSRS). The users have to run for each market each week.
Is there a way to use this report as a Sub-report inside a list of a master report and then use a mult-value parameter?
I want this multi-value parameter to build the values for the list and then run the "sub-report" for each value.
Essentially, I want to create a for each loop.
Any ideas?
I have a report which is multiple pages in the report viewer. Now I want to make it shown in the webpage report viewer just in one page. Is there any ways to realize it?
Thanks
I have a table with a data cell which is printing top-to-down
1
2
3
4
5
6
7
8
I want it to print like
1 2 3 4 5 6 7
How to do this??
The cell is in a group detials sections. and I am using Reporting Services 2000 with VS.NET 2003
Thanks in Advance
I currently have two different reports that I print and then combine together, with multiple records printed with both reports. This works ok but I'd like to combine them. I need to still have two pages print. Is there a way to combine these? The db is being used for an event where I need to get the pages printed quickly so if they can be combined it would sure help out.
Mark
Hey all,
1) I have a report with many parameters that I want users to be able to pick from. Allow them to pick 1, many or all to build their report dynamically. I'm all set on the TSQL side, but on the Reporting Services side I have to allow each parameter to be null with a default of NULL. In by doing this, the report will auto run, which I do not want to happen. The only resolution I've found thus far was by adding a parameter that does nothing, with a NULL default value. Yet It sticks out like a sore thumb on the report and I want to get rid of it. If I check in "Hidden" in the parameter options, my report errors out stating that the parameter requires a value.
2) Is it possible to have a parameter that has available values from a dataset have a NULL checkbox like those of parameters that do not have available values?
3) Is it possible to add back/forward buttons inside of a report instead of just at the report header by default?
Thanks!
I am trying to figure out a way to toggle the visibility of attribute data based on a parameter. Specifically, I have a report that has many columns that an end-user may not want to see, depending on what they are using the report for. I know you can toggle visibilities on individual columns easily enough, however I want the user to be able to select which fields (at the attribute level) they want visible on the report up in the parameters, via a multi-value prompt.
Is this possible with reporting services 2005?
Thanks.
Hi All,
I have a report parameter which i multivalue. I want to display the selected value in a text box. I have written the following code :
=Switch(Parameters!ServiceAttribute.Count = 1,Parameters!ServiceAttribute.Value(0),
Parameters!ServiceAttribute.Count = 2,(Parameters!ServiceAttribute.Value(0) & ", " & Parameters!ServiceAttribute.Value(1)))
Which suggests that if only one of the two multivalue parameter id is selected display the same (Parameters!ServiceAttribute.Value(0)).
This works fine when i select both the attributes but throws an exception "Index was outside the bounds of the array" when i select only one of the parameters. Can anyone help me with that?
Also i want this report parameter to allow null i.e. if a user does not select anything he should still be able to view the report.
In case of regular dropdowns i have added a <Null> value to the existing values and set the default to null. But in case of multi-value, it does not give an option of adding <Null>
Hi all
Is there any way to display 5 records per page,when i display report in reporting services.
Pls Help me
Hi,
I am using SQL 2000 SP4 and Report Server SP2 on W2k3 SP1 Server.
I am having trouble displaying the report pages if I am connected from the Internet.
I have no problem if I am connected in the office (Intranet).
The frame that is not show is underneath the New Subscription bar in my report page. I can see everything above (header pages etc) and Home page etc.
I think for some reasons the request frame URL page is still https://myserver/Repor... instead https://myserver.mycompany.com/Report...
Thank's for any help
gogu
PS: Also I am able to deploy only from the Intranet with Target Server URL https://myserver/ReportServer
If I setup VS.NET deploy Target Server URL https://myserver.mycompany.com/ReportServer it comes up with "A connection could not be made ..."
If I open the Browser from the Intranet I can see the reports pages even if with https://myserver.mycompany.com/Reports...
but it ask me for Username / Password.
How can I tell VS.NET when deploy to use username/password?
I have a multi-column report with a page header that spans the width of the report. Whenever I close the report and reopen it, the header is changed to the width of the column. This isn't a real big deal because I deploy it with the header across the whole page; but once in a blue moon I accidentally hit the F5 key (which I am used to using for refresh in other environments I work in) and the report gets redeployed with the messed up header. Is there anyway to stop RS from automatically adjusting the page header?
And is there anyway to disable the F5 key from deploying the reports. I do use it to build and run windows apps, and don't want to change that, but I don't want to deploy 80+ reports when I accidentially hit it.
Thanks.
Hi,
I'm trying to get a data value to appear in the report footer on each page of my report. Using the technique described in various text books etc. I have placed a hidden text box in the report body, and the footer references this text box value.
The report is 4 pages long when I print preview it. The hidden field was initially placed near the top of the report body, so it is there on page 1 in print preview and the footer works on page 1. Pages 2,3,4 (where the hidden field ain't) just gets #Error in the footer.
If I simply move the hidden field further down in the report body so that now its on page 2 in print preview, then guess what - the footer now works on page 2 but errors everywhere else!
Why are ReportItems not known across the whole report? This is maddening. Does anyone know how to make a simple hidden text box value, that is referenced by the page footer, work so that every instance of the page footer shows the correct value?
thankyou
rob
I have my stored procedure set to
Territory_code IN (@Territory)
, now , how do i enter in more then one value. When i select the multi value check box, it gives me more spaces. But then doesnt recognize the values when i put in more then one. am i doing something wrong?
The field is a Varchar 20
hi to all,
I am using Sql server reporting services.When i have create a report .rdl file and deploy it on Report server and than display that report on my application's .aspx page in pdf format using web services , every thing is perfactly working in my senario at the starting time but now i faced a problem with that. When record goes more than 2000 (in my senario a single record disply in a one report pdf page means for 2000 record in table that means its display in 2000 pdf page as with next forward option of pdf view),So in that cas it doesn't work, did now show any report and give the error as
ex.Message"Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
--
<?xml version="1.0" ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head>
<title>Server Unavailable
</title>
</head>
<body>
<h1><span style="font-family:Verdana;color: #ff3300">Server Application Unavailable
</span></h1>
<p>
<span style="font-family:Verdana;">
The web application you are attempting to access on this web server is currently unavailable. Please hit the "Refresh" button in your web browser to retry your request.
</span></p>
<p>
<b>Administrator Note:
</b> An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur.
</p>
</body>
</html>
--."string
Any body have any idea please help me as soon as possible.
urgently--- any help will be appriciate.
thanks in advance.
arvind
When I use the PageBreakAtEnd on the table or on a group in the table, all it does is create a new column of the column report.
I'd want it to start a new page, how can I do this ? Should I work around this issue using code ?
Background: What I need to achieve is a report with 2 columns where the list of products in category 1 are listed in the left column and then snake to the 2nd column on the same page, then to column 1 on page 2, column 2 on page 2, etc...
When it comes to category 2, it should start a fresh new page regardless of whether the previous product was rendered in column 1 or column 2.
I get the snaking to work using the "Columns" property of the report Body. However page breaks do not start a new page, they just start a new column.
Hi out there
It seams that I have run into a know and apparently unsolved problem.
How do I force a page break, not column break, on a multi-column report?
I have 4 columns, my data is grouped and is setup to page break after each group.
But all I get is a column break, due to RS thinking of column's as pages.
Several people have posted about the same problem, but I can't find a solution. See...
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=884945&SiteID=17
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=226045&SiteID=17
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1654050&SiteID=1&pageid=0
http://www.themssforum.com/SVCS/Page-break-77428/
http://www.themssforum.com/SVCS/Createing-real/
http://www.bokebb.com/dev/english/2008/posts/2008116837.shtml
Does anyone know how to solve this ???
Hi All,
I am having a main report having two subreports, say M1,S1 and S2 respectively.
The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,
Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()
Any Solution?
Thanks and Regards
Pragash
What we've found is that when you have two reports where one navigates to the other, if you click on the second page of the second report, it takes you to the second page of the original report. If you navigate over to the subreport again and click for the second page, it works appropriately. This is definitely a no-go for production code and this may delay our ship date because I would think this is definitely undesirable.
Conditions:
ASP.NET Report Viewer using Remote Reports
Report that links to another report
Both reports return more than one page
Reporting Services installed
Steps to Reproduce:
Download the source code here.
Follow the directions (near the bottom of the post) to get the project set up.
Run it and click on a link in the first report to go to the second report.
Click the arrow for page 2 of the second report.
Notice how it takes you back to page 2 of the first report (this doesn't happen when you are in preview mode in the Reporting Services project and I don't believe it does this in a smart client application).
Click on a link in the first report to go back to the second report.
Click the arrow for page 2.
Notice how it takes you to page 2 of the second report.
Here is a link with source code and a more detailed explanation: http://geekswithblogs.net/robz/archive/2007/11/21/Reporting-Services-2005-BUG-Report-Linking-and-Paging---ASP.NET.aspx
So what I am looking for is both a workaround for now and if this is determined to be a bug, to be fixed in the next service pack.
hi,
i am using ssrs 2005 and need to pass the multi selected parameter values to another report. how can i achieve this task? I use jump to report option.
Null date values within a table in SQL Server are displays as (12/30/1899) by Report Builder. Does anyone know how to display the null value as blank?
Thanks in advance
I have a power pivot with 2 multi valued report filters student_branch & blood_group. These report filters are used to fetch the data set that contain below result set
student_branch blood_group count
Everything works fine. But, what i am looking for , is there any way to show the what are all the report filters that are selected currently by , separated in a separate cell ? below is the image for output reference.
I have a report with 5-6 tables showing different summary information. These are set up to all go one after another and there are no page breaks. The only instance I would like a page break is if a table content is getting split cross pages. Is there a way for me to specify that a table will be on a new page if it is broken accross multiple pages?
(This is due to Row growth, not column growth)
(KeepTogether is set to true)
Any help is greatly appreciated.
I understand that Multi-Select Parameters are converted behind the scenes to an In Clause when a report is executed. The problem that I have is that my multi-select string parameter is turned into an in claused filled with nvarchar/unicode expressions like:
Where columnName in (N'Value1', N'Value2', N'Value3'...)
This nvarchar / unicode expression takes what is already a fairly slow-performing construct and just drives it into the ground. When I capture my query with Profiler (so I can see the In Clause that is being built), I can run it in Management Studio and see the execution plan. Using N'Values' instead of just 'Value1', 'Value2','Value3' causes the query performance to drop from 40 seconds to two minutes and 40 seconds. It's horrible. How can I make it stop!!!?
Is there any way to force the query-rewriting process in Reporting Services to just use plain-old, varchar text values instead of forcing each value in the list to be converted on the fly to an Nvarchar value like this? The column from which I am pulling values for the parameter and the column that I am filtering are both just plain varchar.
Thanks,
TC
I am using SS 2005 RS. I am able to generate single page pdf reports by passing "id" as a parameter. Now I need to send multiple ids as parameter and generate one big report which would contain reports for all the ids supplied on separate pages. Is this possible? If yes, then how do i do this.
What I have tried so far is, I created new report with a list control and added single page report as a subreport to this list control and grouped this list control using id parameter. When i send multiple ids in the parameter, for example 3 ids, it generates 3 page report but only for the first id. So it generates report for the first id and repeats same report 3 times.
Thanks for your help,
There is a multi value parameter called "include" in the report where "Allow Multiple Values" is checked and it has 4 Available values as shown in the attached screen shots and preview of the report is also shown .There is no data set for this parameter and the values will get displayed on the report based on the visibility condition set in the report.Example : If first value is selected then 1 is passed and based on the visibility condition set in the report - the report output is displayed.None is default value and has value 4 and when the report is run with this option i.e. "None" then rest three parameter values are not applicable .
Requirement :
-When the end user selects (Select All) Check box then (None)
-check box must be disabled or must not appear for selection for the end user
-When the end user selects check boxes either of the first three except None then also None check box must be disabled or must not appear for -selection for the end user
-when the end user selects a combination of first three then also None check box must be disabled or must not appear for selection for the end user
-The None is set as default with a value as 4 and is applicable only when the user does not select either of the first three values and the report will run.
I have a requirement where i have to display some data in the form of multi column but the main report should be in a standard one.I have tried by using sub report as multi column and used that in my main report but when i preview the report it is considering it as a normal report.Do we have any feature in SSRS to have both multi & standard report layouts in one report.
View 4 Replies View RelatedHi ,
I am working on Sql server Reporting Services(Sql Server 2005),
i have designed a Report and deployed that report on Report Server, on this report i need to show the user selected values
in page header by using Parameters which i have already created in the Report.
There are 35 to 40 fields in the Front End(Asp.net2.0)
on passing all these values from front end Report is prompting for parameters which is not desired for my case even though i have made ShowParameterPrompts to false.
Thanks in advance
Srinivas Govada
How to display the logo in middle of report header , The logo is embedded in the Image folder . The column of the report are static. we are using SSRS 2008
View 6 Replies View Relatedhai iam new to ssrs, please help me.
i have student billbale information assume what ever data it. i need to to dispaly total amount for the student at
Bottom Of Report By Daily, Weekly, Monthly, SYTD . take any example, i want to know formula.
thanks to advanced
Jacks v
hello to all..
can someone tell me how I counld get a pagefooter linked textbox to show a data bound
page footer in a report having 8 tables....???
I have tried the common solution showed on the previous forums..
They worked when there was only one table...
where in i could place a group in 1 of the cells in the table body of the report.
but now since der are 8 tables in the report.. d job is become very tricky.
the page footer is not showing up on all the pages of the report.
it only shows on the first page of the report.
Plz help......
Regards
Savio.
Is it possible to have different chart (having their dataset from same shared datasets) like six on one report, then secondly can they all respond to same parameter filter.
View 3 Replies View RelatedHi All,
I have a question, How to user the Multi value in Visual Studio Report Designer.
My dataset contains the following
Select empno,empname,basicpay,deptcd from employee where deptcd in (substring(@gdept,1,4))
Here variable gdept is the report parameter. I am passing the value.
it works fine with single value.
( the source of gdept is a another dataset to list the deparment code+name,
Example
DEP1 - COMPUTER
DEP2 - ADMIN
DEP3 - FINANCE
)
when I preview, i have a combo box to select the department.
If I choose one deparment, it works fine.
If I choose more than one department or select all I have error message
"substring function requires 3 aruguments."
what is wrong is the query
Please advise.
Cheers,
Saleem
I need to somehow set up a third parameter which allows me to control the tag quantity type either by ALL - % , IS NULL, or IS NOT NULL.
I tried TAG_QUANTITY LIKE :Tags but this would only work if I had the % option select and not the IS NULL or IS NOT NULL
Any thoughts on how to format the select statement?
SELECT ORGANIZATION_ID, TAG_ID, PHYSICAL_INVENTORY_ID, TAG_NUMBER, CREATION_DATE, VOID_FLAG, TAG_QUANTITY, TAG_UOM, SUBINVENTORY,
LOCATOR_ID, COUNTED_BY_EMPLOYEE_ID
FROM INV.MTL_PHYSICAL_INVENTORY_TAGS
WHERE (ORGANIZATION_ID = ite) AND (PHYSICAL_INVENTORY_ID = :InventoryID) AND (VOID_FLAG = 2) AND TAG_QUANTITY IS NULL
ORDER BY TAG_NUMBER