I have a temp table that I would like to only display the Qty of 4 one time
The total Qty is 4
Part Fac Loc Lot Qty
===== === === === ===
8793 07 FG 111 4
8793 07 FG 122 4
8793 07 FG 113 4
8793 07 FG 144 4
I want to display Qty 4 so when I do a sum I do not get qTY 16
Part Fac Loc Lot Qty
===== === === === ===
8793 07 FG 111 4
8793 07 FG 122 0
8793 07 FG 113 0
8793 07 FG 144 0
This one I hope is easy, but I've been working late and it seems to be aluding me. I have a field called time_in which is a char(6) field type. This field holds time elements such at 10:57
My query below is substracting one hour from Time_In and returning it as Hold_Time. I only want to return the time element without the date portion or the milliseconds, etc.
Code Block
select substring(cu.time_in, 1,5) as time_in,
DATEADD(hour, -1, substring(cu.time_in, 1,5)) as hold_time
from reports.careunits_hold_hours cu
[Current Result Set]
Time_In hold_time
10:57 1900-01-01 09:57:00.000
[Desired Result Set]
Time_In hold_time
10:57 09:57
I just uploaded my tables to sql server, and am using access to run the forms. In one listbox I have a few fields that I want to display only the time ex. (9:00pm) which works good in access, but in sql the listbox displays the date + the time (04/01/2004 + 9:00pm).
The datatype I am using is datetime length 8.
I also have a strange problem with modifying records. In access it takes one click on my "modify record" button I made to change a field in a record, but in sql it now requires two clicks. Anyone know what could cause this?
Any help is appreciated.
The stored procedure takes ~ 10 seconds every call. The execution plan is Index seek or clustered index scan almost everywhere . No table spools or lazy loads or key lookups. Cannot share the code or execution plan due to company rules and regulations.Issue is that i am dealing with result set of around 50,000 records . Out of these i have to return 20 records at a single time (which is also customizable i.e 40 / 60/ 150 records in a page). Application cannot handle all 50k records so i have to return 20 records for every stored procedure call.
The result set changes as per the start date and end date which i recieve as parameters. In application there are few Column filters namely- Country(around 50 countries), Outcome(around 6 to 10 values ) . These filters will values in drop down( as excel ) depending on the distinct values in that columns. These filters will be populated on every page, if no filter value is selected.Issue is if user does sorting or filtering any records , this stored procedure is called and every time i have to deal with ~50000 records.
Current Code :
Step 1 ) Get the required result set in temp table .
Step 2) Compute the results on some business rules . (Outcome and SharesAvailable calculation - see attachment)
Step 3) populate filter Columns (Country,Outcome) these values will be comma seperated.
Step 4) Dynamic query to get required result set i.e if user wants only 10 records in single page then TOP 10 . Sorting can be applied on any column mentioned in screenshot.
I know I can display the time that the report was generated, but can I display how LONG it took for the report to complete?
From when the first query was executed to the time all the data was returned and/or the time it took for the report to be rendered back to the end user?
Thanks!
I have a column with DateTime Datatype. But I want to display just Date , not time.
Like 4/26/2006 not 4/26/2006 9:25:55AM
pls help
I have various reports which have in the header a textbox with a time/date expression.
e.g. =Format(Now, "HH:mm on dddd, d MMMM yyyy")
These reports have a daily snapshot taken so users can look up historic versions of reports. The problem is that if the PDF renderer is used the time displayed is the time now not the time the data was generated. (If I view the snapshot in the browser the correct historic time and date is shown though.)
This is at best confusing and at worst could lead to some bad business decisions being made.
Is there any way I can get it to display the actual time and date the snapshot was generated?
I have tried replacing "Now" with "Globals!ExecutionTime" with no effect.
I have also seen a suggestion to move the header textbox into the report body and then add a new textbox to the header pointing at the textbox in the body
e.g. with Expression =ReportItems("LabelToday").Value
But this does not work either and it is still displaying the time now when viewed in PDF format.
Is there any straight forward way of doing this?
If there is no straight forward way can I somehow access the HistoryID from within Report Code so I can look up the correct value myself in the ReportServer database?
Thanks In Advance,
Martin
I am trying to calculate the time difference between the value in the row and the min value in the table. So say the min value in the table is 2014-05-29 14:44:17.713. (This is the start time of the test.) Now say the test ends at 2014-05-29 17:10:17.010. There are many rows recorded during that start and end time, for each row created a time stamp is created. I am trying to calculate the elapsed time and have it as a row in the results.
min(timestamp) - timestamp(value in row) = elapsed time for that test
where Channel = '273'
Here is the table DDL
CREATE DATABASE SpecTest;
USE SpecTest
GO
CREATE TABLE [dbo].[Spec1](
[Spec1ID] [int] IDENTITY(1,1) NOT NULL,
[Channel] [int] NOT NULL,
[Code] ....
Here is some dummy data to use
INSERT INTO Spec1 (Channel, Timestamp, Lambda, Power)
VALUES(273, '2014-05-29 14:44:17.713', 800, '-64.91');
INSERT INTO Spec1 (Channel, Timestamp, Lambda, Power)
VALUES(273, '2014-05-29 15:05:09.507', 800, '-59.11');
INSERT INTO Spec1 (Channel, Timestamp, Lambda, Power)
[Code] ....
Example desired results (I hope the formatting works)
Channel | Timestamp | Lambda | Power | Elapsed_Time
______________________________________________________________
273 | '2014-05-29 14:44:17.713', | 800, | '-64.91' | 0
273 | '2014-05-29 15:05:09.507', | 800, | '-64.91' | 00:20:51
273 | '2014-05-29 15:26:00.520', | 800, | '-64.91' | 00:41:42
273 | '2014-05-29 16:28:34.213', | 800, | '-64.91' | 01:44:16
273 | '2014-05-29 16:49:25.853', | 800, | '-64.91' | 02:05:08
273 | '2014-05-29 17:10:17.010', | 800, | '-64.91' | 02:25:59
ExecutionTime gives server time, How can I get local time ? I'm planning to create a report part and use it across all the reports to display report execution time.
- Reports are being opened in Citrix
-MS SQL Server 2008 R2
Need to display current time in below format:
06/01/2015 at 7:00 a PST
(Date at time TimeZone)
i want to show data Party Name and Time interval wise. here is my table from where i will fetch data. so pasting table data here.
Call start Call duration Ring duration Direction Is_Internal Continuation Party1Name Park_Time
------------------------- ---------------- ------------- --------- ----------- ------------ --------------- -----------
2015/06/08 08:06:08 00:02:28 2 I 0 0 Emily 0
2015/06/08 08:16:38 00:00:21 0 I 0 1 Line 2.0 0
2015/06/08 08:16:38 00:04:13 5 I 0 0 Jen 0
[code]...
now i am not being able to cross join this CTE with my table to get data party name wise and time interval wise. say for if no data exist for a specific time interval then it will show 0 but each party name should repeat for time interval 9:00:00 - 9:30:00 upto 17:30:00. i like to add what filter need to apply to get data for incoming, outgoing, call transfer and miss call.
For Incoming data calculation
where direction='I' and
Is_Internal=0 and continuation=0 and
RIGHT(convert(varchar,[call duration]),8)<> '00:00:00'
For outgoing data calculation
[code]...
Created a report that displays the Maximum Response time (example of value 00:00:00) which is directly pulled from the Stored proc.When I ran the report, the column displays blank values.I am not sure if I should add any conversion to the Response value in the report.
View 2 Replies View Relateddisplaying time interval on y -axis for an ssrs report.
the values are static... it should start from 00:00 - 23:59 with 00:30 interval....
interval of 30 mins...
I tried several functions that are available but didnt work.
I am trying to display time difference between an Admission Date and a Discharge date as follows:
Admission Date:8/26/2015 6:59pm
Discharge Date:9/1/2015 6:49pm
Time Display 5D 23H
I used the following expression but came up with an error
Not sure what I am doing wrong or if this is the best expression to use
=(TimeSpan.FromMinutes(Avg(DateDiff(“n”,<Fields!Admission_Date.Value>,<Fields!Actual_Discharge_Date.Value>)))).Days
“d “ &
(TimeSpan.FromMinutes(Avg(DateDiff(“n”,<Fields!Admission_Date.Value>,<Fields!Actual_Discharge_Date.Value>)))).Hours
“h “ &
(TimeSpan.FromMinutes(Avg(DateDiff(“n”,<Fields!Admission_Date.Value>,<Fields!Actual_Discharge_Date.Value>)))).Minutes
& “m “ ))))
I want to display only the date part of a date field which contains both date & time information.
For example I have the value '2013-11-14 00:00:00.000' in my result set, and ideally I would like to show only '2013-11-14'.
I have looked up the datepart() command, however I can't work out how to return all parts of the date, rather than just the year, month, or day.
I would like to display a portion of report where there is data or no data
There is data subreport display
Product Name Latex Gloves
Product ID
xxxx5678
There NO data in the subReport
Product Name
Product ID
Hi all,
I have created a report in SSRS 2005 which is being viewed by users from different Time Zones.
I have a dataset which has a field of type datetime (UTC). Now I would like to display this Date according to the User Time Zone.
For example if the date is August 07, 2007 10:00 AM UTC,
then I would like to display it as August 07, 2007 03:30 PM IST if the user Time Zone is IST.
Similarly for other Time Zones it should display the time accordingly.
Is this possible in SSRS 2005?
Any pointers will be usefull...
Thanks in advance
sudheer racha.
Sample Table
USE [Testing]
GO
/****** Object: Table [dbo].[Testing] Script Date: 4/25/2014 11:08:18 AM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[Code] ....
It seems to work fine with one million records.
Each primary key is unique, but the begindate is non-unique, and i guess even if i use datetime2 and add nanoseconds, from what i have read, there is a chance that i could have a duplicate datetime since the date is imported via XML from multiple sources.
Is there a way to keep track in real time on how long a stored procedure is running for? So what I want to do is fire off a trace in a stored procedure if that stored procedure is running for over like 5 minutes.
View 5 Replies View RelatedI am trying to load previous days data at 3 am via a SSIS job.
The Date variable is initiated as DATEADD("dd",-1, GETDATE()) in the for loop.
Now, as this job runs at 3 am, and I set the variable as GETDATE() - 1, it excluded the data from 12 am to 3 am in the resultset as Date is set as YYYY-MM-DD 03:00:00:000 I need this to be set as YYYY-MM-DD 00:00:00:000
How can i do this?
I hope to update a DateTime column value with a Time input parameter. Poor attempt below but it looks like the @ApptTime param is coming in as 10:45:00.0000000 and I might have an existing @SendOnDate as: 2015-10-05 07:00:00.000...I hope to end up with 2015-10-05 10:45:00.000
ALTER PROCEDURE [dbo].[SendEditUPDATE]
@QuePoolID int=null
,@ApptTime time(7)
,@SendOnDate datetime
[code]...
I am using VS2005 (VB) to develop a PPC WM5.0 Program. And I am using SQLCE 3.0. My PPC Hardware is in 400MHz.
The question is when the program try to insert the first record into sdf database after each time the program started. It takes a long time. Does anyone know why and how can I fix it?
I will load the whole database into a dataset when the program start and do all the "Insert", "Update", "Delete" in this dataset and fill it into database after each action.
cn.Open()
sda = New SqlCeDataAdapter(SQL, cn) 'SQL = Select * From Table
scb = New SqlCeCommandBuilder(sda)
sda.Update(dataset)
cn.Close()
I check the sda.update(), it takes about 0.08s for filling one record into database normally. But:
1. Start the PPC Program
2. Load DB into dataset
3. Create a ONE new record in dataset
4. Fill back to DB
When I take this four steps everytime, the filling time is almost 1s or even more!
Actually, 0.08s is just a normal case. Sometimes, it still takes over 1s to filling back a dataset which only inserted one record when the program is running. (Even all inserted records are exactly the same in data jsut different in the integer key)
However, when I give up the dataset and using the following code:
cn.Open()
Dim cmd As New SqlCeCommand(SQL, cn) ' I have build the insert SQL before (Insert Into Table values(XXXXXXXXXXXXXXX All field)
cmd.CommandType = CommandType.Text
cmd.ExecuteNonQuery()
cn.Close()
StartTime = Environment.TickCount
I found that it is still the same that the first inserted record takes more time, but just about 0.2s. And the normal insert time is around 0.02s. It is 4 times faster!!!
SELECT
CONVERT(VARCHAR(10),attnc_chkin_dt,101) as INDATE,
CONVERT(VARCHAR(10),attnc_chkin_dt,108) as TimePart
FROM pmt_attendance
o/p
indate 04/18/2015
time part :17:45:00
I need to convert this 17:45:00 to 12 hours date format...
Hi,
We need to select rows from the database that have been recently inserted/updated. We have a main primary table (COMMIT_TEST) and a second update table (COMMIT_TEST_UPDATE). The update table contains the primary key and a LAST_UPDATE field which is a datetime (to tell us when an update occurred). Triggers on the primary table are used to populate the update table.
If we insert or update the primary table in a transaction, we would expect that the datetime of the insert/update would be at the commit, however it seems that the insert/update statement is cached and getdate() is executed at the time of the cache instead of the commit. This causes problems as we select rows based on LAST_UPDATE and a commit may occur later but the earlier insert timestamp is saved to the database and we miss that update.
We would like to know if there is anyway to tell the SQL Server to not execute the function getdate() until the commit, or any other way to get the commit to create the correct timestamp.
We are using default isolation level. We have tried using getdate(), current_timestamp and even {fn Now()} with the same results. SQL Queries that reproduce the problem are provided below:
/* Different functions to get current timestamp all have been tested to produce the same results */
/*
SELECT GETDATE()
GO
SELECT CURRENT_TIMESTAMP
GO
SELECT {fn Now()}
GO
*/
/* Use these statements to delete the tables to allow recreate of the tables */
/*
DROP TABLE COMMIT_TEST
DROP TABLE COMMIT_TEST_UPDATE
*/
/* Create a primary table and an UPDATE table to store the date/time when the primary table is modified */
CREATE TABLE dbo.COMMIT_TEST (PKEY int PRIMARY KEY, timestamp) /* ROW_VERSION rowversion */
GO
CREATE TABLE dbo.COMMIT_TEST_UPDATE (PKEY int PRIMARY KEY, LAST_UPDATE datetime, timestamp ) /* ROW_VERSION rowversion */
GO
/* Use these statements to delete the triggers to allow reinsert */
/*
drop trigger LOG_COMMIT_TEST_INSERT
drop trigger LOG_COMMIT_TEST_UPDATE
drop trigger LOG_COMMIT_TEST_DELETE
*/
/* Create insert, update and delete triggers */
create trigger LOG_COMMIT_TEST_INSERT on COMMIT_TEST for INSERT as
begin
declare @time datetime
select @time = getdate()
insert into COMMIT_TEST_UPDATE (PKEY,LAST_UPDATE)
select PKEY, getdate()
from inserted
end
GO
create trigger LOG_COMMIT_TEST_UPDATE on COMMIT_TEST for UPDATE as
begin
declare @time datetime
select @time = getdate()
update COMMIT_TEST_UPDATE
set LAST_UPDATE = getdate()
from COMMIT_TEST_UPDATE, deleted, inserted
where COMMIT_TEST_UPDATE.PKEY = deleted.PKEY
end
GO
/* In our application deletes should never occur so we dont log when they get modified we just delete them from the UPDATE table */
create trigger LOG_COMMIT_TEST_DELETE on COMMIT_TEST for DELETE as
begin
if ( select count(*) from deleted ) > 0
begin
delete COMMIT_TEST_UPDATE
from COMMIT_TEST_UPDATE, deleted
where COMMIT_TEST_UPDATE.PKEY = deleted.PKEY
end
end
GO
/* Delete any previous inserted record to avoid errors when inserting */
DELETE COMMIT_TEST WHERE PKEY = 1
GO
/* What is the current date/time */
SELECT GETDATE()
GO
BEGIN TRANSACTION
GO
/* Insert a record into the primary table */
INSERT COMMIT_TEST (PKEY) VALUES (1)
GO
/* Simulate additional processing within this transaction */
WAITFOR DELAY '00:00:10'
GO
/* We expect at this point that the date is written to the database (or at least we need some way for this to happen) */
COMMIT TRANSACTION
GO
/* get the current date to show us what date/time should have been committed to the database */
SELECT GETDATE()
GO
/* Select results from the table we see that the timestamp is 10 seconds older than the commit, in other words it was evaluated at */
/* the insert statement, even though the row could not be read with a SELECT as it was uncommitted */
SELECT * FROM COMMIT_TEST
GO
SELECT * FROM COMMIT_TEST_UPDATE
Any help would be appreciated, we understand we could make changes to the application/database to approximate what we need, but all the solutions have identified suffer from possible performance issues, or could still lead to missing deals (assuming the commit time is larger than some artifical time window).
Regards,
Mark
I need to do a time test for restoring an Azure SQL database from a point in time. Can I automate this through PowerShell.
View 3 Replies View RelatedI need to take a temporary table that has various times stored in a text field (4:30 pm, 11:00 am, 5:30 pm, etc.), convert it to miltary time then cast it as an integer with an update statement kind of like:
Update myTable set MovieTime = REPLACE(CONVERT(CHAR(5),GETDATE(),108), ':', '')
how this can be done while my temp table is in session?
I have a table called employee_punch_record that we use to store employee time clock punches.
The columns are:
employeeid,
punch_timestamp,
punch_type (In / Out),
closed (bit used as status for open or closed pay periods),
ident
Here are some examples of a record:
bkingery62015-10-06 16:59:04.000In0
bkingery72015-10-06 16:59:09.000Out0
bkingery82015-10-06 16:59:13.000In0
bkingery92015-10-06 18:22:44.000Out0
bkingery102015-10-06 18:22:46.000In0
bkingery112015-10-06 18:22:48.000Out0
bkingery122015-10-06 18:22:51.000In0
tfeller52015-10-05 17:00:05.000In0
We are using SQL Server 2008 as our database and use Access as a GUI. I am looking to create a form in Access where employees can access their time card and request changes from management. I want to use the format from the attached screen shot for the form. I pretty much know how to do it all, the only point of complication is trying to figure out the easiest way to get the transaction punch record data on employee_punch_record into a format where I can easily populate the form in the horizontal format you see in the screen shot.
I am not super strong in SQL, but figure I can do it using a formatting table of some sort. quick and easy way to move transaction records into a more horizontally oriented record?
Hi all,
I have a very simple time series model which processing works fine without any problem. However when I run the following query
SELECT
[TimeSeries].[PriceChange],
[TimeSeries].[Symbol],
PredictTimeSeries(PriceChange, -3, 2)
From
[TimeSeries]
WHERE
[TimeSeries].[Symbol] = 'x'
I get the following error:
TITLE: Microsoft SQL Server 2005 Analysis Services
------------------------------
Error (Data mining): A time series prediction was requested with a start time further in the past than the internal models of the mining model, TimeSeries, specified in the HISTORIC_MODEL_GAP and HISTORIC_MODEL_COUNT parameters can process.
The following is the excerpt of the minding model script related to the two parameters:
<AlgorithmParameters>
<AlgorithmParameter>
<Name>MISSING_VALUE_SUBSTITUTION</Name>
<Value xsi:type="xsdtring">Previous</Value>
</AlgorithmParameter>
<AlgorithmParameter>
<Name>HISTORIC_MODEL_GAP</Name>
<Value xsi:type="xsd:int">1</Value>
</AlgorithmParameter>
<AlgorithmParameter>
<Name>HISTORIC_MODEL_COUNT</Name>
<Value xsi:type="xsd:int">10</Value>
</AlgorithmParameter>
</AlgorithmParameters>
These HISTORIC_MODEL_GAP (1) and HISTORIC_MODEL_COUNT (10) should accommodate PredictTimeSeries(PriceChange, -3, 2). Could anyone shed some light on this?
we have problems with our SQL Reporting Service 2012 (SSRS) server . We have setup Kerberos delegation between SSRS and the database server (SQL Server Always-on cluster) so users are authenticated down to the database. The issue occurs from time to time that SSRS loses the ability to delegate the user credentials to the database. At this point in time the Report Server logs contain rejected database connections because of ANONYMOUS logon. After restarting SSRS the problem is gone.
View 2 Replies View RelatedHi,
I have a table which has a few fields, one being "datetime_traded". I need to write a query which returns the row which has the closest time (down to second) given a date/time. I'm using MS SQL.
Here's what I have so far:
Code:
select * from TICK_D
where datetime_traded = (select min( abs(datediff(second,datetime_traded , Convert(datetime,'2005-05-30:09:31:09')) ) ) from TICK_D)
But I get an error - "The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.".
Does anyone know how i could do this? Thanks a lot for any help!
Ok, so I have some horribly convuluted SQL that I would love to optomize. I'm not happy leaving it in it's current state, that's for sure!
I'm currently working on our test bed servers, so obviously my stats are out because of the "crap-ness" (yes, that's the technical term) of the hardware, but still, it should NEVER need to take this long!!
Basically, the issue arises in the nasty join to the career table (one employee can have multiple career lines). Just to make things complicated, employees can have any number of career records on any given date, these can even be input for future career events. The following SQL picks out the latest-current career date for each employee based on the career_date being <= GetDate() and the date of entry for this date being the greatest.
E.g.
career_date | datetime_created
2009-01-01 | 2006-05-05 13:55:21.000
2007-01-01 | 2006-05-05 13:54:18.000
2007-01-01 | 2006-05-05 13:52:55.000
From the above we want to return
2007-01-01 | 2006-05-05 13:54:18.000
SET STATISTICS IO ON
SET STATISTICS TIME ON
SELECT a.sAMAccountNameAs 'sAMAccountName'
, a.userPrincipalNameAs 'userPrincipalName'
, 'TRUE'As 'Modify'
, RTRIM(e.unique_identifier)As 'employeeID'
, RTRIM(e.employee_number)As 'employeeNumber'
, RTRIM(e.known_as)
+ CASE WHEN RTRIM(e.surname) IS NOT NULL THEN
' ' + RTRIM(e.surname) ELSE NULL ENDAs 'displayName'
, RTRIM(e.known_as)As 'givenName'
, RTRIM(e.surname)As 'sn'
, RTRIM(c.job_title)As 'title'
, RTRIM(c.division)As 'company'
, RTRIM(c.department)As 'department'
, RTRIM(l.description)As 'physicalDeliveryOfficeName'
, RTRIM(REPLACE(am.dn,'\',''))As 'manager'
, t.full_mobile
+ CASE WHEN RTRIM(t.mobile_number) IS NOT NULL THEN
' (DD: ' + RTRIM(t.mobile_number) + ')'ELSE NULL END
As 'mobile'
, t.mobile_numberAs 'otherMobile'
, ad.address_ad_countryAs 'c'
, ad.address_ad_address1
+ CASE WHEN ad.address_ad_address2 IS NOT NULL THEN
', ' + ad.address_ad_address2 ELSE NULL END
+ CASE WHEN ad.address_ad_address3 IS NOT NULL THEN
', ' + ad.address_ad_address3 ELSE NULL END
+ CASE WHEN ad.address_ad_address4 IS NOT NULL THEN
', ' + ad.address_ad_address4 ELSE NULL END
+ CASE WHEN ad.address_ad_address5 IS NOT NULL THEN
', ' + ad.address_ad_address5 ELSE NULL ENDAs 'streetAddress'
, ad.address_ad_poboxAs 'postOfficeBox'
, ad.address_ad_cityAs 'l'
, ad.address_ad_CountyAs 'st'
, ad.address_ad_postcodeAs 'postalCode'
, RTRIM(ad.address_ad_telephone) +
CASE WHEN RTRIM(a.othertelephone) IS NOT NULL
AND RTRIM(ad.address_ad_telephone) IS NOT NULL THEN
' (Ext: ' + RTRIM(a.othertelephone) + ')'
ELSE
CASE WHEN RTRIM(a.othertelephone) IS NOT NULL
AND RTRIM(ad.address_ad_telephone) IS NULL THEN
'Ext: ' + RTRIM(a.othertelephone)
ELSE NULL
END
ENDAs 'telephoneNumber'
FROM employee e
LEFT
JOIN career c
ON c.parent_identifier = e.unique_identifier
AND c.career_date =(
SELECTmax(c2.career_date)
FROMpwa_master.career c2
WHEREc2.parent_identifier = c.parent_identifier
ANDc2.career_date <= GetDate()
)
AND c.datetime_created =(
SELECT max(c3.datetime_created)
FROMpwa_master.career c3
WHEREc3.parent_identifier = c.parent_identifier
ANDc3.career_date = c.career_date
)
LEFT
OUTER
JOIN AD_Import am
ON am.employeeNumber = c.manager_number
INNER
JOIN AD_Import a
ON a.employeeID = e.unique_identifier
LEFT
JOIN AD_Telephone t
ON t.unique_identifier = e.unique_identifier
LEFT
JOIN AD_Address ad
ON ad.address_pwa_location = e.location
LEFT
JOIN xlocat l
ON l.code = c.location
WHERE (a.employeeNumber IS NOT NULL
OR a.employeeID IS NOT NULL)
SQL Server Execution Times:
CPU time = 0 ms, elapsed time = 0 ms.
(1706 row(s) affected)
Table 'AD_Import'. Scan count 4, logical reads 106, physical reads 0, read-ahead reads 0.
Table 'AD_Address'. Scan count 1, logical reads 2, physical reads 0, read-ahead reads 0.
Table 'AD_Telephone'. Scan count 2, logical reads 10, physical reads 0, read-ahead reads 0.
Table 'Worktable'. Scan count 868, logical reads 956, physical reads 0, read-ahead reads 0.
Table 'xlocat'. Scan count 2, logical reads 8, physical reads 0, read-ahead reads 0.
Table 'career'. Scan count 5088, logical reads 2564843, physical reads 0, read-ahead reads 0.
Table 'people'. Scan count 1697, logical reads 5253, physical reads 0, read-ahead reads 0.
Table 'Worktable'. Scan count 826, logical reads 914, physical reads 0, read-ahead reads 0.
SQL Server Execution Times:
CPU time = 15203 ms, elapsed time = 8114 ms.
Any advice on what I can do to optomize?
Oh judt to point out that "employee" is a view on the "Table 'people'."
EDIT: I know it's pointing out the obvious, but I'm pulling out the managers "DN" from AD_Import based on the manager_number and employeeNumber matching.
I need a formula to calculate the time (let's say in minutes) between two dates/times.
The problem is that I have to exclude the time between 06 PM and 06 AM and also exclude the time in the weekend (Saturday and Sunday).
I will use this in a couple of reports made in Reporting Services.
If anyone have an algoritm that could be modified for this and is willing to share this I would be very grateful.
Many thanks!
/Per Lissel
Hi all,
I have created several global temp tables to cache some intermediate results ...
However, it seems that after a while those tables will be dropped by SQL Server 2005 automatically (I have not restarted the server and no drop table statement ever executed against those tables). Is this a feature by design? How to make those global temp tables persistence to next service restart?
Thanks,
Ning