How To Do Backup In Cluster
Jan 22, 2007
Hi,
I have a cluster set up and working fine. I am in a stage where I need to do the backups. I have added 4 disks as dependecies to the sql service for the instance. The backups should not be on these disks. When I do a simple backup I can see only these 4 disks so my question is how do I do the backup to fileshare or other disks that are not partof the cluster. I have 3 virtual servers so what wil be the best thing to do for backup
Thanks
View 7 Replies
ADVERTISEMENT
Aug 7, 2000
Hi Everbody:
I would like to know your experience about how to make regular database restore and point-in-time restore in SQL Cluster environment.
(1). My first question is about database backup. We use SQL Server backup in our shop. We hope that we can back up the database to a one network shared drive. The SQL Server can not do it. It only allows us to back up database to the local drive. Since there is no too much spaces in the local drives (C, D and E), I would like to know how we can back up to the network shared drive.
(2). A few database are critical databases which require point-in-time restore. How we can back up database (complete backup or differential backup), transaction log?
(3). If database and transaction log crash at the same time, can we still do point-in-time restore?
(4). How we do Master DB and MSDB back up? Weekly or monthly?
Thank you very much for your advice.
Joan
View 4 Replies
View Related
May 6, 2014
How can we change the backup replica in Always on Cluster. I am not able to take backup because of this.
View 7 Replies
View Related
May 12, 2015
Can we backup a DB from SQL Server 2012 (Ent. edition) two node cluster to a local disk ?. Is it possible ?
View 7 Replies
View Related
May 5, 2015
Can we backup our cluster databases directly to tape using native backups (without using any third party tool) ? It's SQL Server 2012 two node Active/Passive cluster. One of the DB will be huge in size, hence checking if we can directly backup from the cluster instance to a tape.
View 7 Replies
View Related
Oct 10, 2015
During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We run the below commands but didn’t get any resolution & got the same above error .
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).
2. net stop winmgmt
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).
4. net start winmgmt
2<sup>nd</sup> Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - net stop winmgmt
2. Run the following commands.
a). Command: Winmgmt /salvagerepository %windir%System32wbem
b). Command: Winmgmt /resetrepository %windir%System32wbem
3. Re-enable the WMI service
Command: sc config winmgmt start= auto
Last command to run after above steps
4. Command: mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"
File not found Error for above command.
View 3 Replies
View Related
Jun 10, 2015
I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2
Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid.
Msg 3156, Level 16, State 50, Line 2
File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 2
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
View 1 Replies
View Related
Apr 10, 2014
I ran the Advanced cluster preparation for a new sql instance on an existing cluster.
Slq Server 2012.
After is completed, it was successful, I realized I specified the wrong Instance Root directory.
Is it possible to remove what the preparation installed? Or is it possible to change the root directory?
View 3 Replies
View Related
Jul 6, 2015
Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.
View 4 Replies
View Related
Feb 18, 2014
I´ve been reading that SQL Server 2012 Always On is dependent on having a Windows Failover Cluster setup. Is that correct ?
View 6 Replies
View Related
Nov 6, 2014
I have following script which i am planning to run to drop all non-clustered primary keys on a database and then created as clustered. I am using someone else's script so don't know how to modify this. Some of primary key columns are used in references in other tables.
is there anyway i can drop the existing primary keys and using their original script then create again as clustered including restoring all foreign and reference keys and unique or no unique.
DECLARE @table NVARCHAR(512), @tablename NVARCHAR(512),
@sql NVARCHAR(MAX), @sql2 NVARCHAR(MAX), @sql3 NVARCHAR(MAX),
@column NVARCHAR(MAX);
DECLARE @indexname NVARCHAR(512);
SELECT name As 'Table'
[Code] ....
View 8 Replies
View Related
Oct 8, 2015
can we join a node in a windows cluster which is already in a different cluster?
We have this requirement as we need to setup readable secondary ( always on AG) on the third node.
View 2 Replies
View Related
Jul 15, 2015
We are planning to change all IPs of PRODUCTION Failover Cluster Setup. In my cluster setup ... we have 2 Physical Nodes with windows-2008, Roles are MSDTC and SQL-2008R2.
IP change for:
1. Both Nodes(Physical)
2. MSDTC
3. SQL Server
4. windows Cluster
So Almost... All IPs are going to change.
Im DBA here, I need to take care of SQL cluster and MSDTC. But I haven't performed this activity before.So I'm worrying about Impacts and consequences of this change. steps how should I perform this activity.
View 9 Replies
View Related
May 20, 2003
Hi all,
We have many tables which have cluster index on column with datatype 'Char(200)'.
Does anyone have script to change cluster index to noncluster for all user tables which have clustered index on a column with 'char(200)' datatype.
Thanks,
Deepak
View 2 Replies
View Related
Jul 26, 2015
Wanted to know about difference between cluster and non cluster index with example.
When to use cluster index and non cluster index .
View 3 Replies
View Related
Jun 10, 2015
CREATE TABLE [dbo].[Access](
[AdminID] [int] NOT NULL,
[FnID] [int] NOT NULL,
CONSTRAINT [PK_AccessFn] PRIMARY KEY NONCLUSTERED
[Code] ....
why the cluster and non cluster indexed created on the same key?
View 3 Replies
View Related
Jul 17, 2000
I am trying to upgrade a SQL Server 6.5(Cluster) to SQL Serevr 7.0 (Cluster)..I already have an intsllation of 7.0(On a Cluster),so this means that 6.5 and sql 7 are on seperate cluster's ,if i try to upgrade from 6.5 Cluster to 7.0 Cluster is asks me to uncluster 6.5 and 7.0 is this correct ,assume i cannot break the cluster then what???.. what is the best way i can achieve this functinality.....
thanks in advance
Jack
View 1 Replies
View Related
Jan 31, 2008
Hi there
I'm getting this message on my third automated backup of the transaction logs of the day. Both databases are in full recovery mode, both successfully backed up at 01.00. The transaction logs backed up perfectly happily at 01:30 and 05:30, but failed at 09:30.
The only difference between 05:30 and 09:30's backups is that the log files were shrunk at 08:15 (the databases in question are the ones that sit under ILM2007, and keeping the log files small keeps the system running better).
Is it possible that shrinking the log files causes the database to think that there hasn't been a full database backup?
Thanks
Jane
View 3 Replies
View Related
May 8, 2007
Hi
We are planning to upgrade the SQL Server in our production environment from SQL Server 2000 to SQL Server 2005. This is a 4 Node cluster environment with 3 Databases on 3 Virtual instances. The main requirement is to achieve this with no/minimal downtime.
Could you please suggest or direct me to any documentation for the best practices used to upgrade such an environment?
Thanks
Priyanka
View 2 Replies
View Related
Aug 30, 2006
We have (had) an active/active cluster. 2 physical machines,
each running their own instance, clustered together. Node1/Ins1 and Node2/Ins2.
Node2 failed and Ins2 failed over to Node1 as it should. Node2 required that we
rebuild the server (rebuild = reinstall O/S). Now we need to get Node2 back
into the cluster and get Ins2 failed back over to Node2.
Does anyone know, for certain, the correct steps to accomplish this? Obviously,
we could backup everything and completely destroy Ins2 and recreate it on Node2
then rejoin the cluster. But I'm looking for something less destructive.
Is it possible to reinstall SQL, then rejoin the cluster, and then fail Node2
over? Or will there be registry conflictions?
Any help would be appreciated. Also, if you have any links to some official
documentation, that would be great too.
Thanks
View 4 Replies
View Related
Dec 28, 2007
We're upgrading a SQL Server 2000 cluster (Active/Passive) running on Windows 2000 Server to a SQL Server 2005 Cluster running on Windows Server 2003. We can't purchase new hardware and we have no spare hardware. We also need to move from Windows 2000 Server to Windows 2003 Server at the same time. We want to keep downtime to a bare minimum.
What we were thinking was the following steps... Anyone try this?
1. Break the link between the servers.
2. Install a fresh copy of windows 2003 server on one side along with SQL Server 2005. While this step is running, the active node would still be live on Windows 2000 Server and SQL Server 2000 serving our customers.
3. Restore a copy of a backup from the active production side to the node we're upgrading and at that point we would bring the active node down, switching the active node to be the newly upgraded server.
4. As a final step, the old active node would now have the link to it broken, we would install a fresh copy of windows 2003 server on it and sql server 2005. At this point we would bring it back into the cluster and the cluster would be complete again.
Thoughts?
View 2 Replies
View Related
May 14, 2008
Friends -
Need your help and guidence for doing upgrading SQL Server 2000 Cluster to SQL Server 2005 Cluster.
Let me explain my current environment.
1. Currently SQL Server 2000 Cluster environment is running on Windows 2000 Server we need to upgrade this to SQL Server 2005 on Windows 2003 Server. >>> Production environment.
My Plans:
1. On Testing Environment Install SQL Server 2000 cluster on Windows 2003 Server and do a restore of databases from the produciton environment.
2. Upgrade In-Place from SQL Server 2000 Cluster to SQL Server 2005 Cluster.
My doubts
1. Can i install SQL Server 2000 Cluster on Windows 2003 Server. Is it possible or not.
Please advise me and correct my steps.
Cheers
VSH
View 1 Replies
View Related
Jun 13, 2007
Can the SQL Cluster Virtual IP be the same as the cluster IP?
Can I set up the cluster like:
Node 1:10.0.0.1
Node 2:10.0.0.2
MSCS Shared:10.0.0.3
SQL Virtual:10.0.0.3
or do they need to be unique?
View 1 Replies
View Related
Jul 4, 2007
I have two Windows 2000 servers (Advance Edition) to form a Windows Cluster. I also install MS SQL 2000 Enterprise Edition on the cluster to form a MS SQL cluster. Now, I want to upgrade the hardware and OS (but keep on using SQL 2000), so I install Windows 2003 server Enterprise Edition on two new servers to form a new Windows Cluster. I am planing to install MS SQL 2000 Enterprise Edition on the new cluster, so the old SQL cluster and new SQL cluster are side by side. I would like to know how to setup a new SQL cluster (I know it has problem to rename SQL Cluster name, so how to fix this problem)? And how to transfer everything (such as system databases, users database, sql user account, password and maintenance plan jobs etc) from old SQL cluster to new SQL cluster? And how to switch over from old SQL cluster to new SQL cluster?
Thanks a lot !
View 8 Replies
View Related
Mar 14, 2008
According to microsoft, we can cluster SSIS service but it is NOT RECOMMENDED.
http://msdn2.microsoft.com/en-us/library/ms345193.aspx
Now this is the situation that I have where I need to understand how SSIS works?
Enviornment: Active Active cluster enviornment for SQL server with SSIS server installed as stand alone as default on both node.
Name: Node 1 Node 2
--------- -------------- ---------------------
Server name: Nd1 Nd2
SQL server name: cs-nd1in01 cs-nd2in02
SSIS server name: Nd1 Nd2
BTW, this is cosolidated enviornment so there are more than one application expected and resides on each instance of SQL server.
The question is around SSIS, what would be the best practice to develop SSIS package that can work with above envoinrment.
Secnario: What if my Nd1 fails. SQL server cs-nd1IN01 will be failover to Nd2 and it will be available. But How about SSIS packages? How that understands
to use Nd2 SSIS as Nd1 SSIS is not available. Is anyone has similar experience to setup SSIS in cluster envionrment but as non-cluster service?
Please help. Thanks in adavance.
View 1 Replies
View Related
May 15, 2008
Friends -
Could any one of you provide steps for upgrading SQL Server 2000 cluster to SQL server 2005 cluster.
My environment is Windows 2003 server.
Appreciate your support.
Cheers
VSH
View 1 Replies
View Related
Aug 23, 2013
On the SQL Server the Event Viewer shows the same messages and errors every evening between 22:05:00 and 22:08:00. The following information messages are shown for every database:
"I/O is frozen on database <database name>. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup."
"I/O was resumed on database <database name>. No user action is required."
"Database backed up. Database: <database name>, creation date(time): 2003/04/08(09:13:36), pages dumped: 306, first LSN: 44:148:37, last LSN: 44:165:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{A79410F7-4AC5-47CE-9E9B-F91660F1072B}4'}). This is an informational message only. No user action is required."
After the 3 messages the following error message is shown for every database:
"BACKUP failed to complete the command BACKUP LOG <database name>. Check the backup application log for detailed messages."
I have added a Maintenance Plan but these jobs run after 02:00:00 at night.
Where can I find the command or setup which will backup all databases and log files at 22:00:00 in the evening?
View 9 Replies
View Related
Feb 18, 2015
SQL Server 2008 r2 - 6 GB memory...I attempted a backup on a 500GB database but it was taking way too long. I checked the resources on the box and saw the CPU at 100%. I checked the SQL Server activity log and saw a hung query (user was not even logged on) that had multiple threads so I killed it and now the CPU utilization is back to normal.
Trouble is, now all of the threads in the activity monitor for the backup show 'suspended' and the backup appears to be not doing anything.
View 3 Replies
View Related
Feb 9, 2004
Hi,
I use the Transact-SQL BACKUP statement in Visual Basic to backup my local MSSQL Database. It give me this error
Error 3041
BACKUP failed to complete the command BACKUP DATABASE [BCFPC] to BCFPCBKP
I already created a backup device called BCFPCBKP and it is backup to the disk.
I tried to run the same BACKUP statement in SQL Query Analyzer and it worked fine. I tried to run my VB application in another PC. It worked fine when i use this command remotely. Can anyone tell me what's the problem?
Thanks in advance
regards,
M.Y. Yap
View 2 Replies
View Related
Feb 19, 2015
Using Ola Hallengren's scripts I do a full backup of a database on a Sunday. Then differential backups every 6 hours and log backups every hour. I would like to keep a full week of backups based off the full backup done on Sunday. Is there a way for me to clear out the diff and log folders after the successful full backup on Sunday nights?
View 2 Replies
View Related
Aug 3, 2015
Need to restore database,here's the scenario:
Data got deleted on Friday evening, need to have database restored to FRiday afternoon and also some data has been entered on Monday, which needs to be there.
View 8 Replies
View Related
Dec 28, 2007
Windows 2003 backup utility uses the shadow copy option that allows it to copy open files.
Therefore, can I use this utility to backup the .mdf and .ldf files for my SQL 2000 database?
I can then attach the .mdf files if I need to restore the database to another server.
Can anyone tell me if this is safe? I've tried it and it worked but I'm worried there maybe some lurking danger in using this approach.
View 4 Replies
View Related
Jul 15, 2015
We take a full backup in the early morning and hourly transaction log back during the working hours for one database in the production server. The application team made certain changes to the design of the said database in their development server. The backup from the development server was restored to the production server during working hours. After the restoration should we take a full backup before next transactional logbackup? Would the transactional log backup with out a full backup after the restoration of a database be valid?
View 5 Replies
View Related
