I have a table with say 10 rows. How can I sum up the first 10 rows and subtract that total from the 10th row value?
Rows 1-9 have a specific value in the dataset and row 10 has a different value so I can distinguish the rows. However I can figure out the expression I should add to the table footer?
So I am saying, if the row has a "recordType" value of something other than 1 then sum it and then subtract any value where the "recordType" is equal to 1.
But I just get am "#error" on the report footer when I run it.
I currently have an Ungrouped Dataset being displayed in a Table. One of the columns include AMOUNT. This is an example of what my report looks like atm: ================== **Report Name**
No Name Amount
Signed By XXXX ==================
I would like to display a SUBTOTAL of the Amounts for each page and, on the final page, a TOTAL of the Amounts. Yes the Last Page's SubTotal and Total will be the same. Looking like: ===============================
pg1 **Report Name**
No Name Amount Sub Total Amount Signed By XXXX
(lastpage) **Report Name**
No Name Amount
(<-----no huge spaces between Table/Subtotal) Sub Total Amount
Total Amount
Signed By XXXX
=================================
Issues: I've found a way to get a Page's SubTotal, but the way I found requires this to be put in a field on the Page Footer Section. This means that on the final page, the SubTotal will be at the top of the Page Footer and not neccessarily directly beneath the table.
So: 1. Is there a way to move the Page Footer so that its printed DIRECTLY under neath the Page Body instead of at the bottom of the Page? 2. If not, is there a way to have the SubTotal of each Page and a Final Page Total in the Page Body section. Cheers.
I have a table for which I need a “special� running total. More specifically there should be a close communication between the credit and the debit column. The scenario should be in the following order “Credit�“Debit�“Balance credit�“Balance debit� 6 0 6 0 5 0 11 0 0 4 7 0 0 9 0 2 3 0 1 0 0 5 0 4 0 2 0 6
I have to point out that this is done in a grouped form, where the CustormerID is the grouped clause. Now I have achieved this to a point where the calculations work only if the credit column is bigger than 0, but when the account starts with debit I get only sums of the column not the needed subtractions. What am I missing? Thanks in advance. DECLARE @PrevRunBal MONEY --Overall running total SET @PrevRunBal = 0 DECLARE @PrevGrpBal MONEY --Running total resets when account changes SET @PrevGrpBal = 0 DECLARE @PrevRunCnt INT --Overall running count (ordinal rank) SET @PrevRunCnt = 0 DECLARE @PrevGrpCnt INT --Running count resets when account changes SET @PrevGrpCnt = 0 DECLARE @PrevAcctID INT --The "anchor" and "account change detector" SET @PrevAcctID = 0 changes SET @PrevGrpBalP = 0 update Temp
SET --===== Running Total @PrevRunBal = RunBal = @PrevRunBal + dolguva, -- @iznos =RunBal= dolguva - pobaruva + @sdol -@spob, --===== Grouped Running Total (Reset when account changes) @PrevGrpBal = Bcredit = CASE
WHEN CustomerID = @PrevAcctID THEN CASE WHEN CREDIt > DEBIT or CREDIT = 0 THEN (@PrevGrpBal+CREDIT)-(DEBIT) WHEN DEBIT>CREDIT or DEBIT =0 THEN (@PrevGrpBal+DEBIT)-DEBIt END ELSE CASE WHEN CREDIT >DEBIT THEN (CREDIT) WHEN DEBIT > CREDIT THEN DEBIT -- restarts from 0 if only 1 rec. END
END,
--===== Running Count (Ordinal Rank) @PrevRunCnt = RunCnt = @PrevRunCnt + 1, --===== Grouped Running Total (Ordinal Rank, Reset when account changes) @PrevGrpCnt = GrpCnt = CASE WHEN CustomerID = @PrevAcctID THEN @PrevGrpCnt + 1 ELSE 1 -- Restarts count at "1" END,
--===== "Anchor" and provides for "account change detection" @PrevAcctID = CustomerID Apologies if I'm posting in a wrong forum
I have a report with a group total and a report total. The report total is the sum of all group totals. When I run the report in report manager (sql server 2005 SP2) it shows the report total on the last page of the report with the group total for teh client. for instance the first page has Report Title Details Group Total
Second Page Details Group Total
Last Page Details Group Total Report Total
When I export the report to pdf the Report Total is printing on its own separate page which is not what I want. I would like the report total be on the last page of teh report just like shown above. The report total is in the table footer.
I have a sum , which is filtered within its table group, and then i have a fields in the footer. How would i aggregate these too together and use the result in another row within the footer.
[rsInvalidAggregateScope] The Value expression for the textbox €˜textbox129€™ has a scope parameter that is not valid for an aggregate function. The scope parameter must be set to a string constant that is equal to either the name of a containing group, the name of a containing data region, or the name of a data set.
I'm using SSRS SP2. I have a table with 1 group defined. I have a group footer that includes sub totals for each group. I have a table footer that includes my grand totals, but this footer will NOT print on a separate page even though I have 'Page Break At End' checked for the group. My groups correctly start on a new page, but when I get to my Grand Total footer line, it prints just after the last group sub-total line. Any ideas what I might be doing wrong? Thanks in advance,
I have a report (bills of lading for shipments) that uses a table to organize the data coming in and groups by customer. Each customer grouping has a header, body and footer in the table. A print run might generate 100 bills of lading, each between 1 and 4 pages long.
I have marked the group to force a new page when each new group occurs.
As it is the report runs beautifully EXCEPT that the footer prints wherever it happens to end up -- midway down the final page of the bill and looks quite goofy.
What I really need (and my client is really surprised that SSRS won't me) is to print the group footer at the bottom of the final page of each bill of lading.
Bills of lading may be several pages per customer, so until the group footer is hit, I don't want any footer info at all. As I said, it all works fine except for the final page of each bill, where the group footer occurs whereever it has ended up.
Jim
12/4/07
This post didn't get much of a response. So perhaps I should amend it -- If what I am trying to do is impossible, what would be the preferred way?
I have a table that contains a column for a calcuated member (x) of type decimal number. When I tried to display the total of this calculated member in the table footer (=sum(x)), I am getting "#Error" instead of the sum of all displayed calculated values.
Column X
--------------
0
0.67
0.10
0.23
#Error (footer cell, expression -> =Sum(x))
=First(x), =Last(x) and =Max(x) worked fine, not sure why Sum failed. Please help...
How can I calculate a subtotal for a Report Item? I have a textbox(lets call it "PlusMinus") in the detail section of my table, which is a calculated textbox of two others (lets call them "Budget" and "Spent"). So, PlusMinus = (Budget - Spent). What I would like to do is get a subtotal for PlusMinus. I have tried several ways, using Sum() or RunningValue, even tried to write code, but I can't seem to get it right. Any ideas??
I am having a problem viewing my footer on all pages of my report. I have created a page footer that reads ="The " & ReportItems("textbox213").Value I am getting the value on the first page only and then only getting "The" on the rest. My "PrintOnFirstPage" and "PrintOnLastPage" are both marked True in the Page Footer properties. I am completely confused. This is not the only textbox in my footer I have two others both which print on all pages, but neither of them use the ReportItems.
I have a report, using a table, that is grouped by acct. The acct indicates either revenue or expenses. I have a total in my table that will give me the totals for revenue, and the total for expenses. At the end of the report, in the table footer, I want to add a Surplus/Deficit total, which would be the total revenue - total expenses, but I can't seem to get it right. I tried the following: =Sum(ReportItems!table1_Group1.Value) thinking that it would give me the total by the group, but I get the error that an aggregate function can only be used on page header and footer. How do I just get a basic grand total in my report?
For some odd reason the footer of my report never gets printed. The footer contains the page number and report name and is very important to my report. I made sure the margins are 1 inches for all sides, made sure Footers printing in first and last pages are checked in the properties section, and gave it a large amount of space around the textbox. Is there anything I am doing wrong? Also, the header and body prints correctly.
There is an option in ssis to skip one or more header rows, but there isn't any thing to skip one or more footer rows.
Example:
header bla bla 1;"Joe";24;"New York" 2;"John";54;"Washington" 3;"Phil";36;"San Francisco" footer bla bla
I skip the first record in the source definition. So I have left 4 records. How do I skip the fourth (last) record? The value contains some statistics so I cann't look for a special value. Is there a way to skip the last record with a script component?
Hi. I wote a report including body and pagefooter, On body I put a list & the list inside had a table. Now when I print out this report, printer will printout 2 pages. (correct report is 1 page) , and on the second page, it had page footer only. If I turn off this page footer on next page, printer still printout a blank page that's i don't need. Does anybody can help me fix this problem? Thanks
I'm writing a report that will have data for mulitple accounts btoken up by page breaks(on account)
The user would like to see the name of the account in the footer. Since the entire report will consist of many accounts using first or last in the footer element is not an option.
Does anyone know of a way to get the account that is displayed in the body of the page to display in the footer?
MDC1 DrgDesc1 Chronic 50 Other 25 Total cases for DrgDesc1= 75
DrgDesc2 Chronic 20 Other 33 Total cases for DrgDesc2 = 53
etc....
I have everything working up to the Total cases for each DrgDesc. I tried adding a group footer to the Cases row, however this sub-totals for Chronic and Other rather than summing them together. Example is below.
MDC1 DrgDesc1 Chronic 50 50 Other 25 25 DrgDesc2 Chronic 20 20 Other 33 33
Hi, I have a report with text in the footer. When I exported it to excel, every thing except from the footer is exported (the report body and header are OK).
I'm not getting any error but the text in the footer just doesn't appear.
I want to display a concatinated value of strings (DB field) having a "/" in between, for each group separately in the group footer.I tried using custome code.I was calling that code in detail.In detail it was showing correctly i.e running concatenated value for each record.But when i used the same global variable in group footer it's taking previous group's concatenated value and first groop footer shows a blank string.I guess its because groop footer thing is getting executed before the detail part.so can you please give me any solution for this.
I have two DataSet and two tables in a report. Almost identical reports (top 5). Both DataSet have a Boolean indicator and I am to append an asterisk to a column in the detail rows if indicator is true. If an asterisk appears, I am to display the footer, that has a comment in it explaining the asterisk.
Public Class AsteriskFootNote
'
' To be used on the Visibility.Hidden attribute
'
Dim _FooterVisiblity As Boolean = True
Public ReadOnly Property FooterVisibility() As Boolean
Get
Return _FooterVisibility
End Get
End Property
'
Function AsteriskIndicator(ByVal strInd As String) As String
If (strInd.ToLower = "true") Then
_FooterVisibility = False
Return "*"
End If
Return ""
End Function
'
End Class
I have instantiated two classes Dollars and Hours. In the detail, call the
=Fields!Descr.Value & Code.Dollar.AsteriskIndicator( Fields!MultiInd.Value ) In the footer visibility, I assign hidden:
=Code.Dollar.FooterVisibility But it does not work. The tables act as if they assign the Hidden value, then processes the detail rows.
hi, I am using vb.net 2005 and sql server 2005 express edition. I have used reports (*.rdlc) to print invoice. The invoice format is as follows: '********************************************************************************** Company Name
All the data is placed in body section of report using different DataTable dataregions. This is done as Taxes and Duties have multiple Rows and columns but the location of printing of Taxes & duties Table on paper always changes depending on the no. of items in the invoice this does not match with the pre printed stationery used for invoice printing.
How do i print the taxes & duties and all details below the ItemDetails Table always at the same location independent of the no. of items in the invoice?
Is there a way to split at this point and put the 12 rows in a different location? The task is twofold - I don't need these control rows in my data and I need value of "records" to verify loaded number of rows.
UPDATED: After some testing I found out that the Flat File source does not see that footer at all. This is good and bad - I do want to load this metedat into some other tables.
Hi all, i am using sql server 2005. let me explain the scenario. i have report where i bring perticular employee totalcall and workeddays(from sp) then in third field i wrote an expresion to evaluate avg call that is totalday/workeddays and all the three field i displayed in table [b]Now requirment is in tablefooter i need to display avg of above calculated avg call
