How To Enter A Date Parameter In Debugger
Jun 22, 2004
(This is prob. a really dumb question but it's driving me mad!!...)
I am using the Debugger in SQL Query Analyzer & want to set the value of a datetime parameter prior to executing the stored proc. The "Debug procedure" window allows me to specify the parameter values - but I can't get it to accept a datetime. The language is us_english & I've tried most ways if specifying the date - 01/02/2004, with/out quotes, 02 Jan 2004, as a full datetime, swapping day/month values etc etc. The procedure always fails immediately with: Invalid character value for cast specification.
Thanks.
View 1 Replies
ADVERTISEMENT
Mar 28, 2007
Hi all can you help me please, I need the users to be able to enter in a date for a self generating report. Usually I use the @Enter_Date but I need them to be able to enter a start date and a end date
But when I run this query SQL gives me an error message Server: Msg 207, Level 16, State 3, Line 1
Invalid column name 'Enter the Start Date'.
Server: Msg 207, Level 16, State 1, Line 1
Invalid column name 'Enter the End Date'.
What should use in place of BETWEEN [Enter the Start Date] And [Enter the End Date]??
SELECT [Main Table].[IR Number], [Main Table].Date, [Main Table].Inspector, [Main Table].Area, [Main Table].Violation, [Main Table].[Violation Type], [Main Table].Loss, [Main Table].[Loss Type], [Main Table].Employee, [Main Table].Action, [Main Table].[Action Type], [Main Table].Notes
FROM [Main Table]
WHERE ((([Main Table].Date) Between [Enter the Start Date] And [Enter the End Date]))
ORDER BY [Main Table].[IR Number]
View 4 Replies
View Related
Mar 29, 2006
Hey in Access MDB you can create a query that when you run it, it will ask you to Enter the Paramer Value, User could enter in a year or Team Member Number or however you have the query set up. is this possible in SQL ADP???
View 10 Replies
View Related
Nov 24, 2014
I have been asked to write a query on SBO.It requires (among other) a reference to a budget, which does not exist anywhere now.It is a yearly budget that changes quarterly.I suppose I could add a table and update the no. each quarter - but will the history be kept?What would you recommend?Also, they require a quarterly comparison (all in the same report) is it possible for the user to enter a range of date (for sales data, for example) and also receive the data for that range only last year's?
View 5 Replies
View Related
May 18, 2006
I just moved from Access to SQL 2005 Express. I have a table with contains a Column contactDate datetime. Under the properties tab ( in SQL Manager ), I see a field "Default Value or Binding".
I would like to have a default date/time entered into this field when a new record is created. In Access I used the Now() to get this done. Any sites that list some of the values that can be entered into this field?
TIA - RR
View 5 Replies
View Related
Oct 22, 2007
I want to capture date and time record is inserted to database.
My table got a field called
field name datatype length
rec_datetime datetime 8
what is the best way to enter value?.
View 7 Replies
View Related
Nov 7, 2013
Without having to update it every day.
This is so no one enters a value higher than the current date.
ALTER TABLE Persons
ADD CONSTRAINT chk_Person CHECK (Closed_Date>)
View 2 Replies
View Related
Mar 12, 2015
Issue #1 I have a report that takes 8 character parameter, A error message needs to popped out if user enters parameter less than 8 character.
Issue #2 I have a report with Tablix. A message needs to display if Tablix returns no Rows.
View 1 Replies
View Related
Apr 9, 2015
Sometimes I want to quickly to edit a record in a table instead of using an insert statement.
Sometimes there are auditing columns like DateCreated, and CreatedBy,
I know it can be made as default. for DateCreated to be sysdatetime, and createdby to be system user.
But I just curious to know if there is a way to manually enter today's date and the user in the cell?
View 9 Replies
View Related
Apr 11, 2008
I have my stored procedure set to
Territory_code IN (@Territory)
, now , how do i enter in more then one value. When i select the multi value check box, it gives me more spaces. But then doesnt recognize the values when i put in more then one. am i doing something wrong?
The field is a Varchar 20
View 1 Replies
View Related
Oct 15, 2007
Hi,
I have parameters in my report. The user can choose the year, month and date (3 parameters).
Now I want to set default vaules for the parameters , so that the user sees the report for example for the current day without selecting the parameters. I tried to set the type of the parameters to DateTime and the default value for example for the year to "=Today().Year" . But when I execute the report an error occures . Something like : no validValue for this parameter.
My Attributes for the year month and date are from an Analyis Services Cube from a Server Time dimension .
Does somebody know how to make it possible to set default values for this parameters?
Other question :
Does somebody know how I can reduce the values for a parameter. For Example I have a parameter "year" from a server time dimension from a cube. The values which are available are "Year 2004", "Year 2005", "Year 2006", "Year 2007".
But I want that the user only can choose "Year 2006" or "Year 2007" ant not every Year or "All".
Or Other Example: The User should only choose a Date that is int the past or Today but not a Date in the future.
Thanks !
JF
View 7 Replies
View Related
Jul 24, 2007
I am having report parameter end date I am showing the default value "5/21/2007 11:59:59 PM" in the end date paramter. And also I want to show date time format "(MM/DD/YYYY HH:MMS)" in the right hand side of the parameter. How to do this?
Thank You
View 1 Replies
View Related
Aug 11, 2013
Date parameter. I created a report that allows a drop down for a date range to be selected. However, whenever I preview the report, I get an error. I know my error stems from my date fields being in this format "201301" , and the "date/ time" in SSRS being mm/dd/yyyy on the drop down calendar in SSRS.
I know the direction I want to go in, but just a little confused on where would I use the convert or cast function. Would it be in the data parameter itself, or a part of the query before the @start date and @End date?
View 18 Replies
View Related
Nov 21, 2007
Hi,
I tried to create parameters in my report. I need one date picker. So i select data type as datetime. in default values i selected as non-queried and in date time functions i selected =Today. But am unable to set current date. Please help me to solve it.
Regards
Nataraj.C
View 2 Replies
View Related
Jan 24, 2008
Hello,
I am using the calender parameter and I need to convert my data date format to the one that matched that is returned on selecting a date from this calender. Can you show me what this format is.
how can I convert my existing date format to this format. The existing date format is 2007-07-26 21:27:13.000
thank you
Kiran
View 5 Replies
View Related
Jul 23, 2015
I am working into a t-sql where i need to expand the date within a date parameter. For example:
Start Date = '1/1/2014'
End Date = '12/31/2014'
I want to expand this as:
01/2014
02/2014
03/2014
04/2014
05/2014
06/2014
up to
12/2014
View 4 Replies
View Related
Apr 22, 1999
Anyone know of any third party T-SQL debuggers for stepping through stored procedures? I understand there is one with VB6, but a student in my class doesn't work with VB. TIA.
View 1 Replies
View Related
Jun 18, 2002
Hi,
I've just read in books on line that in Query Analyser there is a debugger tool. Unfortunately I can't work out how to access and use it. Can any one send me some info on this please.
Thanks
Steve
View 1 Replies
View Related
Jan 13, 2006
Hi All,
Once I open my TSQL Debugger all the icons are disables ( Step Into , Step Over ).
This is the fisrt time I am using it can you please point be in the right direction.
This happens after giving the Input parameters in the Dubug Window for the Stored Procedure
and when I click the EXECUTE button.
NOTE : This happeds when I lauch the Debugger from the ClIENT Machines. If I run the debugger on the
server directly it works fine. Am I missing any of the DLLs
Thx
venu
View 1 Replies
View Related
Jul 20, 2005
Hi,Could u tell me how to use the debug tool to debug out t-sql statements .With Thanks
View 2 Replies
View Related
Jan 16, 2008
store procedure
@End_Date datetime
SELECT * FROM table1 WHERE PROCESS_DATE <= @End_Date
@End_Date format: 1/1/2008
PROCESS_DATE format: 1/1/2008 12:45:01 PM
I can not get the date after running the procedure using the value/format above. I think the problem is that SQL convert @End_Date value to 1/1/2008 00:00:00:AM, which makes 1/1/2008 12:45:01 PM > 1/1/2008
Since I only need to compare the date (no need time), how can I resolve the problem from the C# code or SQL level? Is that possbile to make 1/1/2008 default to the max datetime like 1/1/2008 11:59:59:PM?
View 4 Replies
View Related
Apr 2, 2008
Hi,
My boss would like to see on our report a code that would pull the date 01-01-2008 to the present. They want to be able to run this report whenever they wanted to. What is the best way to create this code.
Could I just use my field, which is "clm_dout" to say Clm_dout >= or is there another type of code I should use?
Thanks
View 8 Replies
View Related
Feb 21, 2006
Hello ........
I have a DateTime parameter in my report.
I want the last date of the current month selected as default in the date parameter(datetime picker ).
Can anybody help me ?
Thanks
View 7 Replies
View Related
Mar 22, 2007
hi and thanx in advance
in a report, i am getting data from a stored proc which take to date parameter fromdate and todate which are passed from report.
user select dates in datepicker control
but problem is that it not returning any record
Can problem be in date format difference in report and sql server ?
View 1 Replies
View Related
May 21, 2007
One of the fields in the table is of type smalldatetime.
When I select a date from the report parameter (a calender), the report produces an error: The value provided for the report parameter 'ValueDate' is not valid for its type.
Please note that if I use a report parameter of type string and enter 21 may 2007 the report works. But if a date is selected from the calender control i.e. 21/05/2007 the report produces the above error.
How is it possible to use the calender parameter without the report giving the error pls?
Thanks
View 4 Replies
View Related
Oct 20, 2006
Hello guys I hope everyone is doing well I have a question. I have a database thats an ADP. on one of the forms I have a command button that has a stored procedure in it that will allow them to search by TM# or name or whatever, (I have the code below) I would like them to be able to do the samething but by date rather then TM# or Name, how would I go about doing that with a datetime datatype??
thank you
ALTER PROCEDURE dbo.Search_ActiveConditionals
(@Enter_TM# int)
AS SELECT TM#, LASTNAME, FIRSTNAME, CONDITIONAL, DATEOFCONDITIONAL, INVESTIGATOR_COND, REASONFORCOND
FROM dbo.ACTIVE_CONDITIONALS
WHERE (TM# = @Enter_TM#)
View 2 Replies
View Related
Oct 5, 2007
Hi,
I have a situation where i need to have two parameters (startDate, endDate) and use them as filters for my query. But i don't want to have a stored procedure with these parameters. So how can i have the two date parameters as calendars to choose dates from?
View 2 Replies
View Related
Jul 20, 2005
Hi,I'm trying to run a select statement that takes includes an if/elseclause. I need to select the 'tran_date' between....if the current month is greater than 10 i.e. after OCT then thetran_date will be between '01-Oct' - plus current year or thetran_date is '01-Oct' plus previous year.and the current dateHere is my script so far:SELECT a.resource_code ASSOCIATE, a.tran_date START_DATE,b.description PROJECT_CODE, sysdateFROM actrans a, acactivity b, dual cWHERE a.resource_type = 'E'AND a.acct_category = 'TIME'and a.activity like '9-WW-357852%'and b.activity = a.activityand tran_date betweenif to_char(sysdate, 'MM') > 10)begina.tran_date = '01-Oct' & to_char(sysdate, 'YY')endelsebegina.tran_date = '01-Oct' & to_char(sysdate, 'YY'- 1))EndORDER BY tran_dateCan anyone help me out with this? I need to run it as a job, but notsure whether I should be using a stored procedure etc..Thanks in advance.George
View 1 Replies
View Related
Aug 7, 2007
Hello Im having a date problem
I have a parameter called @Param_Daterange with the following values
Last 30 days =Today.AddDays(-30)
Last 60 days =Today.AddDays(-60)
My SQL has a chart which uses the following SQL
SELECT Sum(dbo.tbl_OMDQ_Aggregates.Value) AS SumOfValue, dbo.tbl_OMDQ_Aggregates.status_desc, dbo.tbl_OMDQ_Aggregates.DateRun
FROM dbo.tbl_OMDQ_Aggregates
WHERE (((dbo.tbl_OMDQ_Aggregates.SaleMonth) IN (@Param_SaleMonth))and (status_desc IN (@Param_ChurnType))) and dbo.tbl_OMDQ_Aggregates.DateRun > @Param_DateRange
GROUP BY dbo.tbl_OMDQ_Aggregates.status_desc, dbo.tbl_OMDQ_Aggregates.DateRun;
In visual studio the chart is working fine, however in IE the data getting returned is only a small subset off the entire data, ...my IE language setting is at English Aus, I also created a textbox so i can see what value the daterange parameter is passing and it seems to be in the correct format...the graph is also in the right day/time format of dd/MM/yyyy. However i have no idea which date is getting passed incorrectly, somewhere the date is getting switched to American format however what is outputting on the screen is in the right format...just not the correct records are returning
can anyone please help
View 1 Replies
View Related
Feb 13, 2008
Hi all,
I have a report that have 2 date parameters (start and end date). How would I check that end date parameter move be equal or greater than Start date?
thanks
View 4 Replies
View Related
Feb 1, 2007
Hi,
How to control the Datetime Parameter's format, such as I need the user input Date and Time, but default, the user can only select date, but can not input the time.
How to solve it?
Thank you.
View 1 Replies
View Related
May 8, 2007
I am sure others have ran into this issue.
But I need to have date parameters using the datetime type and I need to be able to pass the correct value to the MDX.
View 1 Replies
View Related
Jan 3, 2007
hi all
We are a multi site / multi language company so do not want to hardcode the date format - these reports will be on intranet
Using MS Sql - Reporting Services 2005
Using no formatting on fields = yyyy-mm-dd - is how it is displayed.
I added a @startdate and an @enddate parameter
I read up and saw this information:
Report properties set
'Language' setting to '=User!Language' to detect user
culture automatically
My regional settings are set to English (New Zealand)
but whatever I do I receive no data - (data is definately there eg when run without parameters) so it is obviously the dates incorrect.
Can someone give me some advice on what else to check.
View 19 Replies
View Related