How To Execute A Stored Procedure From Query Analyzer
Jun 3, 2007
I am trying to execute a stored procedure in Query anaylzer for SQL server 2005. I am not sure I am doing it correctly though, because I am getting an error message. Here is the command I am typing:
execute DetaHistoryGet(84,885,34,"EndDate")
Here is the error message I get:
Msg 102,Level 15, State 1, Line 1
Incorrect syntax near '84'
Here are a few lines from the stored procedure. I have not included it all here.
For some reason, I run a stored procedure in Query Analyzer and it works fine. When I run the very same procedure in MS access by clicking on its link I have to run it twice. The first run gives me the message that the stored procedure ran correctly but returned no records. The second run gives me the correct number of records but I have to run it twice. I am running month-to-month data. The first run is Jan thru March. Jan and Feb have no records so I run three months on the first set. The ensuing runs are individual months from April onward. The output is correct but any ideas on why I have to do it twice in Access? I am a bit new to stored procedures but my supervisor assures me that it should be exactly the same.
I have a problem with a stored procedure that executes properly when running it in Query Analyzer. When I call the SP from an ASP.NET application, it doesn't seem to run properly. I have verified that the parameter values are correct, but there is one update command that does not update any rows when it executes although it should. I tried stepping through the SP from within Visual Studio and it still does not work properly even though all parameters have the correct values.
Why would a SP execute properly when used in QA but not when an application executes it?
I am trying to see if there is anyway to BCP a stored procedure from SQL query analyzer. The statement works fine from the command prompt or from within DTS but not from SQL QA.
The bcp statement is as follows: master..xp_cmdshell "bcp "exec pubs.dbo.sp_employee" queryout dev01e$emp.txt /c /o dev01e$emp.out /T /SDEV01"
sp_employee has the script: SELECT * FROM EMPLOYEE
hi ng,i am newbie to sqlserver and my problem seems simple, but i didn't findinformation about it:How can i display theRETURN @xvalue of a stored procedure in the sql analyzer of the sqlserver?thanks a lot,d
HI, I have an interesting situation. I have created a stored procedure which has a select union query and it accepts some parameters. When I execute this procedure it takes 8 minutes. When I copy the script in stored procedure and run it directly in Query Analyzer it takes 2 1/2 minutes?? Same numbers of rows are returned either way in the result set with about 13,000.
I cannot figure this out and it is almost the same thing except that in Query Analyzer I declare the parameters variables and its values?
Hi. I am having a problem using DTSRun in a stored procedure or in query analyzer. My DTS package truncates a table and then imports data from an Excel spreadsheet into the table. The DTS package runs fine if I run it manually on Enterprise Manager or if I use DTSRun in a command prompt. However when I try to run the package in a stored procedure or in query analyzer as follows: ie Exec master..xp_cmdshell 'DTSRUN /SSQL SERVER /NPackageName /Uuserid /Ppassword'
The package does not return an error but it does not actually import any data from the Excel spreadsheet. It is able to truncate the table without any problem. I've tried all kinds of combination of using Windows user id that I know has access to the excel file instead of a sql login. I've run Filemon on the excel file and it seems like DTS is not accessing the file when I use the stored proc or query analyzer method.
If anyone could shed any light on this I would be most grateful. Thanks.
Hi group,I have a select statement that if run against a 1 million recorddatabase directly in query analyzer takes less than 1 second.However, if I execute the select statement in a stored procedureinstead, calling the stored proc from query analyzer, then it takes12-17 seconds.Here is what I execute in Query Analyzer when bypassing the storedprocedure:USE VerizonGODECLARE @phonenumber varchar(15)SELECT @phonenumber = '6317898493'SELECT Source_Identifier,BADD_Sequence_Number,Record_Type,BAID ,Social_Security_Number ,Billing_Name,Billing_Address_1,Billing_Address_2,Billing_Address_3,Billing_Address_4,Service_Connection_Date,Disconnect_Date,Date_Final_Bill,Behavior_Score,Account_Group,Diconnect_Reason,Treatment_History,Perm_Temp,Balance_Due,Regulated_Balance_Due,Toll_Balance_Due,Deregulated_Balance_Due,Directory_Balance_Due,Other_Category_BalanceFROM BadDebtWHERE (Telephone_Number = @phonenumber) OR (Telephone_Number_Redef =@phonenumber)order by Service_Connection_Date descRETURNGOHere is what I execute in Query Analyzer when calling the storedprocedure:DECLARE @phonenumber varchar(15)SELECT @phonenumber = '6317898493'EXEC Verizon.dbo.baddebt_phonelookup @phonenumberHere is the script that created the stored procedure itself:CREATE PROCEDURE dbo.baddebt_phonelookup @phonenumber varchar(15)ASSELECT Source_Identifier,BADD_Sequence_Number,Record_Type,BAID ,Social_Security_Number ,Billing_Name,Billing_Address_1,Billing_Address_2,Billing_Address_3,Billing_Address_4,Service_Connection_Date,Disconnect_Date,Date_Final_Bill,Behavior_Score,Account_Group,Diconnect_Reason,Treatment_History,Perm_Temp,Balance_Due,Regulated_Balance_Due,Toll_Balance_Due,Deregulated_Balance_Due,Directory_Balance_Due,Other_Category_BalanceFROM BadDebtWHERE (Telephone_Number = @phonenumber) OR (Telephone_Number_Redef =@phonenumber)order by Service_Connection_Date descRETURNGOUsing SQL Profiler, I also have the execution trees for each of thesetwo different ways of running the same query.Here is the Execution tree when running the whole query in theanalyzer, bypassing the stored procedure:--------------------------------------Sort(ORDER BY:([BadDebt].[Service_Connection_Date] DESC))|--Bookmark Lookup(BOOKMARK:([Bmk1000]),OBJECT:([Verizon].[dbo].[BadDebt]))|--Sort(DISTINCT ORDER BY:([Bmk1000] ASC))|--Concatenation|--IndexSeek(OBJECT:([Verizon].[dbo].[BadDebt].[Telephone_Index]),SEEK:([BadDebt].[Telephone_Number]=[@phonenumber]) ORDERED FORWARD)|--IndexSeek(OBJECT:([Verizon].[dbo].[BadDebt].[Telephone_Redef_Index]),SEEK:([BadDebt].[Telephone_Number_Redef]=[@phonenumber]) ORDEREDFORWARD)--------------------------------------Finally, here is the execution tree when calling the stored procedure:--------------------------------------Sort(ORDER BY:([BadDebt].[Service_Connection_Date] DESC))|--Filter(WHERE:([BadDebt].[Telephone_Number]=[@phonenumber] OR[BadDebt].[Telephone_Number_Redef]=[@phonenumber]))|--Compute Scalar(DEFINE:([BadDebt].[Telephone_Number_Redef]=substring(Convert([BadDebt].[Telephone_Number]),1, 10)))|--Table Scan(OBJECT:([Verizon].[dbo].[BadDebt]))--------------------------------------Thanks for any help on my path to optimizing this query for ourproduction environment.Regards,Warren WrightScorex Development Team
declare mycur CURSOR SCROLL for select myRowID from myTable order by myRowID open mycur;
Fetch ABSOLUTE 30 from mycur into @id close mycur; deallocate mycur;
select @id this script turns me a value.
i create a stored procedure from above script and its syntax is ok; CREATE PROCEDURE SELECT_MyRow AS declare @cur cursor declare @RowID decimal set @cur = CURSOR SCROLL for select myRowID from myTable order by myRowID open @cur Fetch ABSOLUTE 30 from @cur into @RowID close @cur deallocate @cur select @RowID GO
my c# code using stored procedure is below;
Code Snippet try {
OleDbCommand cmd = new OleDbCommand("SELECT_MyRow", myconnection); cmd.CommandType = CommandType.StoredProcedure; myconnection.Open(); OleDbDataReader reader = cmd.ExecuteReader(); MessageBox.Show(reader.GetName(0));//here fails while (reader.Read()) {
The code above fails because reader reads no values, error message is "No data exists for the row/column" but i know exists. Can anyone help me, what is the difference between stored procedure and script ?
I tried to display return value from stored procedure output parameter in Query Analyzer, but I do not know how to do it. Below is my stored procedure:
Just wonder whether is there any indicator or system parameters that can indicate whether stored procedure A is executed inside query analyzer or executed inside application itself so that if execution is done inside query analyzer then i can block it from being executed/retrieve sensitive data from it?
What i'm want to do is to block someone executing stored procedure using query analyzer and retrieve its sensitive results. Stored procedure A has been granted execution for public user but inside application, it will prompt access denied message if particular user has no rights to use system although knew public user name and password. Because there is second layer of user validation inside system application.
However inside query analyzer, there is no way control execution of stored procedure A it as user knew the public user name and password.
Looking forward for replies from expert here. Thanks in advance.
Note: Hope my explaination here clearly describe my current problems.
I know this must be a very silly question but, what is the PLSQL string I have to use to delete a stored procedure in a database? Essentially I have to remove a stored procedure that comes from a database backup every night because it belongs to a user and that user has to be recreated in the new SQL Server 2000. Simply put:
1. Production database comes into test database 2. Remove copy of stored procedure since it can not be set to dbo user because there is another copy with the same name that belongs to dbo. 3. Remove user 4. Add user (this one brings login name since the restored one didn't) 5. Have a nice day
I've got everything except removing the stored procedure so I will really appreciate the help.
Hi, In SQL 2000, to debug a stored proc I would launch QA, right click and hit debug. How do I accomplish this with SQL 2005. I can't see that it came with QA. Thank you, Steve
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
I am calling a stored procedure (say X) and from that stored procedure (i mean X) i want to call another stored procedure (say Y)asynchoronoulsy. Once stored procedure X is completed then i want to return execution to main program. In background, Stored procedure Y will contiue his work. Please let me know how to do that using SQL Server 2000 and ASP.NET 2.
I apologize for the long post but I am trying to give as much information as I can about the steps I've taken to troubleshoot this.
We have a stored procedure that builds a sql statement and executes it using the Execute command. When I execute the stored procedure through query analyzer it takes close to 5 seconds to execute. When I print out the exact same statement and execute it directly in query analyzer as "raw sql", it takes 0.5 seconds - meaning it takes 10 times longer for the code to execute in the stored proc. I altered the stored proc to execute the printed sql instead of building but it still takes the full 5 seconds and there were no changes in the execution plan. This makes me confident that the issue is not caused by the dynamic sql. I've used with recompile to make sure that the stored procedure caches the most recent execution plan. When I compare the execution plans, the stored proc uses a nested loop whereas the raw sql statement uses a hash join. Seeing that, I added the hash hint to the stored proc and doing so brought down the execution time down from 5 secs to 2 secs but still the raw sql statement uses a clustered index whereas the stored proc uses a non-clustered index and that makes the statement 4 times slower. This proves how efficient clustered indexes are over non-clustered ones, but it doesn't help me since, as far as I know, I can't force SQL Server to use the clustered index.
Does anyone know why sql server is generating such an inefficient execution plan for the stored proc compared to the execution plan that it generates when executing the raw sql statement? The only thing I can think of is that some stats are not updated and that somehow throws off the stored proc. But then again, shouldn't it affect the raw sql statement?
Hello, I am hoping there is a solution within SQL that work for this instead of making round trips from the front end. I have a stored procedure that is called from the front-end(USP_DistinctBalancePoolByCompanyCurrency) that accepts two parameters and returns one column of data possibly several rows. I have a second stored procedure(USP_BalanceDateByAccountPool) that accepts the previous stored procedures return values. What I would like to do is call the first stored procedure from the front end and return the results from the second stored procedure. Since it's likely I will have more than row of data, can I loop the second passing each value returned from the first? The Stored Procs are: CREATE PROCEDURE USP_DistinctBalancePoolByCompanyCurrency @CID int, @CY char(3) AS SELECT Distinct S.BalancePoolName FROM SiteRef S INNER JOIN Account A ON A.PoolId=S.ID Inner JOIN AccountBalance AB ON A.Id = AB.AccountId Inner JOIN AccountPool AP On AP.Id=A.PoolId Where A.CompanyId=@CID And AB.Currency=@CY
CREATE PROCEDURE USP_BalanceDateByAccountPool @PoolName varchar(50) AS Declare @DT datetime Select @DT= (Select MAX(AccountBalance.DateX) From Company Company INNER JOIN Account Account ON Company.Id = Account.CompanyId INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId WHERE SiteRef.BalancePoolName = @PoolName) SELECT SiteRef.BalancePoolName, AccountBalance.DateX, AccountBalance.Balance FROM Company Company INNER JOIN Account Account ON Company.Id = Account.CompanyId INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId WHERE SiteRef.BalancePoolName = @PoolName And AccountBalance.DateX = @DT Order By AccountBalance.DateX DESC
Any assistance would be greatly appreciated. Thank you, Dave
How can I use in stored procedure the faction ‘’in’’ to select values, using execute and the values must not be specified before in the stored procedure
How do you execute a stored procedure in MS SQL Server?I can design and execute them from MS Access dev front end, but cannot seemto find how to run them in the Enterprise Manager.TIA.~ Duane Phillips.
I have setup a user which has execute rights on a stored procedure. The sp is owned by dbo. The user can execute the stored procedure, but it fails, because the stored procedure calls other tables and procedures that the user does not have rights to. Is there a way to allow those procedures to execute without allowing access to everything else for the user I setup? Thanks!
I need to disable and move orphaned computer objects in my Active Directory. The SQL Agent has permission to do this. I have created a stored procedure for the task with intentions of executing it with sp_start_job. However, I cannot execute it in SQL 2005. How can I grant permission to this (login) to execute sp_start_job? This is all run from a web page and NOT the Query Window.
Please anyone help me with my question How do I execute a stored Procedure using SSIS ? I have a stored procedure in SQL SERVER 2005 database that I need to execute using a SSIS package using Execute SQL Task from Toolbox in Visual studio 2005
Hi, I am strugling to execute a insert stored procedure on a button click. The stored procedure is taking values from a temp table and inserting them into a identical table. The procedure is expecting 1 value from a Query string, the stored procedure works as expected when hard coded.
Im completely new to this and have no idea where to begin, i have been looking through the forums for several hours and am still none the wiser.
please can someone point me in the right direction
i have a stored procedure and i want to run a program from it.. i think that i need use api functions but how can i do that.. if there is a nother ways please tell me..
I have a button in a form that I want to execute a simple stored procedure to insert a single value into a database table. The Stored Procedure is:=================CREATE PROCEDURE bplog_insert_invoice_detail (@invo_Id Int) ASINSERT INTO Invoice_Detail (Invo_Id) VALUES(@Invo_Id)GO=================How do i pass the value from and text field (@invo_id) and execute the stored procedure when a button is clicked.Regards.
Hello,I was wondering if it is possible to dynamically execute a stored procedure; for example, in SQL, you can do:insert into Table1( id, name)select id, namefrom Table2Can you do something like:exec spProc @id = id, @name = namefrom Table1Or something like that? I know I can select a row at a time and execute, or write a program, but I was looking to see if there was an easier way.Thanks.
Hello, I'm having trouble trying to execute a simple stored procedure. Could someone please take a look at this and let me know where I went wrong. Dim cn As SqlConnection = New SqlConnection("Data Source=localhost;Initial Catalog=TEST;Persist Security Info=True;User ID=sa;Password=test") Dim cmd As SqlCommand = cn.CreateCommand cn.Open() cmd.CommandText = "cssp_family" cmd.CommandType = CommandType.StoredProcedure cmd.ExecuteNonQuery() cn.closed
Within a stored procedure, is it possible to call multiple other stored procedures asychronously? For example, I'd like to execute both local and remote stored procedures, but don't want/need to wait for the output while the original stored procedure continues to execute each subsequent command.
