Can i execute a URL in tsql stored procedure.
Waht i want's is to hit a url on some event.
I know i can do it in CLR stored procedure but for that i have to deploy assembly on the server which i want's to avoid.
Is there any way i can hit a url from tsql stored procedure
Kamran Shahid
Sr. Software Engineer(MCSD.Net)
www.netprosys.com
I am building a stored procedure that changes based on the data that is available to the query. See below.
The query fails on line 24, I have the line highlighted like this.
Can anyone point out any problems with the sql?
------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the error...
Msg 8114, Level 16, State 5, Procedure sp_SearchCandidatesAdvanced, Line 24
Error converting data type varchar to numeric.
------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the exec point...
EXEC [dbo].[sp_SearchCandidatesAdvanced]
@LicenseType = 4,
@PositionType = 4,
@BeginAvailableDate = '10/10/2006',
@EndAvailableDate = '10/31/2007',
@EmployerLatitude = 29.346675,
@EmployerLongitude = -89.42251,
@Radius = 50
GO
------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the STORED PROCEDURE...
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[sp_SearchCandidatesAdvanced]
@LicenseType int = 0,
@PositionType int = 0,
@BeginAvailableDate DATETIME = NULL,
@EndAvailableDate DATETIME = NULL,
@EmployerLatitude DECIMAL(10, 6),
@EmployerLongitude DECIMAL(10, 6),
@Radius INT
AS
SET NOCOUNT ON
DECLARE @v_SQL NVARCHAR(2000)
DECLARE @v_RadiusMath NVARCHAR(1000)
DECLARE @earthRadius DECIMAL(10, 6)
SET @earthRadius = 3963.191
-- SET @EmployerLatitude = 29.346675
-- SET @EmployerLongitude = -89.42251
-- SET @radius = 50
SET @v_RadiusMath = 'ACOS((SIN(PI() * ' + @EmployerLatitude + ' / 180 ) * SIN(PI() * p.CurrentLatitude / 180)) + (COS(PI() * ' + @EmployerLatitude + ' / 180) * COS(PI() * p.CurrentLatitude / 180) * COS(PI()* p.CurrentLongitude / 180 - PI() * ' + @EmployerLongitude + ' / 180))) * ' + @earthRadius
SELECT @v_SQL = 'SELECT p.*, p.CurrentLatitude, p.CurrentLongitude, ' +
'Round(' + @v_RadiusMath + ', 0) AS Distance ' +
'FROM ProfileTable_1 p INNER JOIN CandidateSchedule c on p.UserId = c.UserId ' +
'WHERE ' + @v_RadiusMath + ' <= ' + @Radius
IF @LicenseType <> 0
BEGIN
SELECT @v_SQL = @v_SQL + ' AND LicenseTypeId = ' + @LicenseType
END
IF @PositionType <> 0
BEGIN
SELECT @v_SQL = @v_SQL + ' AND Position = ' + @PositionType
END
IF LEN(@BeginAvailableDate) > 0
BEGIN
SELECT @v_SQL = @v_SQL + ' AND Date BETWEEN ' + @BeginAvailableDate + ' AND ' + @EndAvailableDate
END
--SELECT @v_SQL = @v_SQL + 'ORDER BY CandidateSubscriptionEmployerId DESC, CandidateFavoritesEmployerId DESC, Distance'
PRINT(@v_SQL)
EXEC(@v_SQL)
-----------------------------------------------------------------------------------------------------------------
I have an insert stored procedure which creates a customer. The customer has a ID which is an autonumber within the SQL server table.
I want to output this value to use this to update another table. How do I output a value of an insert query which i am not passing in as it's an autonumber ??
I am sure someone has come accross this before. Is it a trigger solution ?? Any ideas very welcome.
mark
I have the following for sql server 2000...
Select b.courseName, a.courseId, count(a.courseId) as [count], avg(convert(INT, a.fldScore)) as [average], count(fldPass) as [passed], count(fldPass) as [failed] From tblTest a inner join tblTest2 b on a.courseId = b.courseId Group by a.courseId, b.courseName
Problem is the [passed] and [failed]
As it is, it's counting all of them.
I need to adjust it so passed will only read where fldPass = 'yes'
and fldPass = 'no' for the passed and failed.
Suggestions?
Thanks,
Zath
Well I have a two tables lets say they look like as follows:
Table A
CompanyID
Location
TableB
CompanyID
CompanyName
Date
The CompanyID column has values that look like this:
AAA OR
AAA.BBB OR
AAA.BBB.CCC OR
AAA.BBB.CCC.DDD OR
AAA.BBB.CCC.DDD.EEE OR
AAA.BBB.CCC.DDD.EEE.FFF
each line representing the level of the company.
we can see that CompanyID column exists in both tables. and I would like to find out the CompanyName from table B for each companyID that exists in Table A.
but the tricky part is that for a specific CompanyID in tableA I might not have a exact match.
e.g. in A lets say I have AAA.BBB.CCC.DDD.EEE for CompanyID but in table B i might not have AAA.BBB.CCC.DDD.EEE but instead have AAA.BBB or AAA.BBB.CCC or AAA.
so I have to walk up the tree or these levels to look for a match an get the companyName. the match logic is as such.
If in table A companyID = AAA.BBB.CCC.DDD.EEE then look for same value in B if NOT FOUND then
remove the last level from the companyID value from Table A. so new value of CompanyID = AAA.BBB.CCC.DDD
Now look for this new value AAA.BBB.CCC.DDD in table B. IF NOT FOUND then
remove another level from ComapnyID in table A so new companyID = AAA.BBB.CCC and look for
AAA.BBB.CCC in table B. just going up the tree by chopping off a level till I find a match.
now the question is how to do this in TSQL.... can someone help?
So what I really want to do is to look for a match between A and B based on companyID.
Hi all,
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
Please advise..
Thank You
Hi ,
I ma using sql server 2005.I have a bunch of statements of sql and i have created a stored procedure for those. When i execute i found that there is lot's of difference between execution time of stored procedure and direct sql in query windows.
can anyone help me to optimize the execution time for stored prcedure even stored prcedure is very simple.
I have used sql server 2000 and i am new in sql server 2005.
I am calling a stored procedure (say X) and from that stored procedure (i mean X) i want to call another stored procedure (say Y)asynchoronoulsy. Once stored procedure X is completed then i want to return execution to main program. In background, Stored procedure Y will contiue his work. Please let me know how to do that using SQL Server 2000 and ASP.NET 2.
View 3 Replies View RelatedHello,
I am hoping there is a solution within SQL that work for this instead of making round trips from the front end. I have a stored procedure that is called from the front-end(USP_DistinctBalancePoolByCompanyCurrency) that accepts two parameters and returns one column of data possibly several rows. I have a second stored procedure(USP_BalanceDateByAccountPool) that accepts the previous stored procedures return values. What I would like to do is call the first stored procedure from the front end and return the results from the second stored procedure. Since it's likely I will have more than row of data, can I loop the second passing each value returned from the first?
The Stored Procs are:
CREATE PROCEDURE USP_DistinctBalancePoolByCompanyCurrency
@CID int,
@CY char(3)
AS
SELECT Distinct S.BalancePoolName
FROM SiteRef S
INNER JOIN Account A ON A.PoolId=S.ID
Inner JOIN AccountBalance AB ON A.Id = AB.AccountId
Inner JOIN AccountPool AP On AP.Id=A.PoolId
Where A.CompanyId=@CID And AB.Currency=@CY
CREATE PROCEDURE USP_BalanceDateByAccountPool
@PoolName varchar(50)
AS
Declare @DT datetime
Select @DT=
(Select MAX(AccountBalance.DateX) From Company Company
INNER JOIN Account Account ON Company.Id = Account.CompanyId
INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID
Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId
WHERE SiteRef.BalancePoolName = @PoolName)
SELECT SiteRef.BalancePoolName, AccountBalance.DateX, AccountBalance.Balance
FROM Company Company
INNER JOIN Account Account ON Company.Id = Account.CompanyId
INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID
Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId
WHERE SiteRef.BalancePoolName = @PoolName And AccountBalance.DateX = @DT
Order By AccountBalance.DateX DESC
Any assistance would be greatly appreciated.
Thank you,
Dave
Hi,
Can anybody please tell me if it is possible to execute an url from stored procedure.
thanks in advance,
preeth
Hello:
I have created a stored procedure that will backup and restore a database.
I would like to be able to execute this sp using public rights - any ideas?
Thanks
How can I use in stored procedure the faction ‘’in’’ to select values, using execute and the values must not be specified before in the stored procedure
View 6 Replies View RelatedHow do you execute a stored procedure in MS SQL Server?I can design and execute them from MS Access dev front end, but cannot seemto find how to run them in the Enterprise Manager.TIA.~ Duane Phillips.
View 2 Replies View RelatedI have setup a user which has execute rights on a stored procedure. The sp is owned by dbo. The user can execute the stored procedure, but it fails, because the stored procedure calls other tables and procedures that the user does not have rights to. Is there a way to allow those procedures to execute without allowing access to everything else for the user I setup? Thanks!
View 3 Replies View RelatedI need to disable and move orphaned computer objects in my Active Directory. The SQL Agent has permission to do this. I have created a stored procedure for the task with intentions of executing it with sp_start_job. However, I cannot execute it in SQL 2005. How can I grant permission to this (login) to execute sp_start_job? This is all run from a web page and NOT the Query Window.
View 1 Replies View RelatedPlease anyone help me with my question
How do I execute a stored Procedure using SSIS ?
I have a stored procedure in SQL SERVER 2005 database that I need to execute using a SSIS package using Execute SQL Task from Toolbox in Visual studio 2005
Thanks,
George
Hi,
I am strugling to execute a insert stored procedure on a button click. The stored procedure is taking values from a temp table and inserting them into a identical table. The procedure is expecting 1 value from a Query string, the stored procedure works as expected when hard coded.
Im completely new to this and have no idea where to begin, i have been looking through the forums for several hours and am still none the wiser.
please can someone point me in the right direction
hi to all,
i have a stored procedure and i want to run a program from it..
i think that i need use api functions but how can i do that..
if there is a nother ways please tell me..
thanx..
I have a button in a form that I want to execute a simple stored procedure to insert a single value into a database table. The Stored Procedure is:=================CREATE PROCEDURE bplog_insert_invoice_detail (@invo_Id Int) ASINSERT INTO Invoice_Detail (Invo_Id) VALUES(@Invo_Id)GO=================How do i pass the value from and text field (@invo_id) and execute the stored procedure when a button is clicked.Regards.
View 1 Replies View RelatedHello,I was wondering if it is possible to dynamically execute a stored procedure; for example, in SQL, you can do:insert into Table1( id, name)select id, namefrom Table2Can you do something like:exec spProc @id = id, @name = namefrom Table1Or something like that? I know I can select a row at a time and execute, or write a program, but I was looking to see if there was an easier way.Thanks.
View 1 Replies View RelatedHello, I'm having trouble trying to execute a simple stored procedure. Could someone please take a look at this and let me know where I went wrong.
Dim cn As SqlConnection = New SqlConnection("Data Source=localhost;Initial Catalog=TEST;Persist Security Info=True;User ID=sa;Password=test")
Dim cmd As SqlCommand = cn.CreateCommand
cn.Open()
cmd.CommandText = "cssp_family"
cmd.CommandType = CommandType.StoredProcedure
cmd.ExecuteNonQuery()
cn.closed
Within a stored procedure, is it possible to call multiple other stored procedures asychronously? For example, I'd like to execute both local and remote stored procedures, but don't want/need to wait for the output while the original stored procedure continues to execute each subsequent command.
View 1 Replies View RelatedWhen I run the code microsoft give to launch a DTS package from a stored procedure, the procedure runs continuously, never ending.
When I run the DTS package manually, or from a dtsrun utility, it only takes seconds.
I'm trying to automate this package so it will run after a field in a table has been updated.
Any suggestions are more than welcome.
PS. Here's the code I've been using (that doesn't seem to work):
--- Declare Variables
Declare @hr int
Declare @oPkg int
--- Create Package Object
Exec @hr = sp_OACreate 'DTS.Package', @oPkg OUT
If @hr <> 0
Begin
Print '*** Create Package Object Failed'
Exec sp_oageterrorinfo @oPkg, @hr
Return
End
--- Load Package
---DTSSQLStorageFlags :
---DTSSQLFlag_Default = 0
---DTSSQLStgFlag_UseTrustedConnection = 256
Exec @hr = sp_OAMEthod @oPkg,'LoadFromSqlServer("JENNSERVER", "", "", 256, , , , "RunMS")',null
If @hr <> 0
Begin
Print '*** Load Package Failed'
Exec sp_oageterrorinfo @oPkg, @hr
Return
End
--- Execute Package
Exec @hr = sp_OAMethod @oPkg, 'Execute'
If @hr <> 0
Begin
Print '*** Execute Failed'
Exec sp_oageterrorinfo @oPkg, @hr
Return
End
--- Clean Up Package
Exec @hr = sp_oadestroy @oPkg
If @hr <> 0
Begin
Print '*** Destroy Package Failed'
Exec sp_oageterrorinfo @oPkg, @hr
Return
End
Is it possible to create a stored procedure to run a custom dos command (eg. c:ProgramName param1 param2)?
Thanks,
Ben
Hi, hoping someone may be able to shed some light on this.
I have a stored procedure that conditionally executes different DTS Packages. Everything seems to work, there's no errors at all, but the DTS Packages are never executed. Wondering if anyone has any ideas.
Here's the stored procedure....
CREATE PROCEDURE exportLists
AS
DECLARE @script VARCHAR(8000)
DECLARE @id INT
DECLARE @max INT
select regionid,count(distinct homephone) as phone
into #phone
from tbl_template
Where exportid is null
group by regionid
select officeid,listpath
into #office
from tbl_office
WHERE startdate <= GETDATE()
AND (enddate >= GETDATE() OR enddate IS NULL)
and listpath is not null
and listpath <> ''
Select case when phone > 2500 then '"exportLists" /A MDBFile="' + listpath + '" /A OfficeID ="' + convert(varchar(10),officeid) + '" '
Else '"resetTemplate" /A OfficeID="' + convert(varchar(10),officeid) + '" '
end as cmd
,Identity(int,1,1) as rowno
,phone
into #temp
from #office as O
inner Join #phone as p
on o.officeid=p.regionid
Set @max=@@rowcount
set @id = 1
While @id <=@max
Begin
Select @script='"Dtsrun /S "' + @@SERVERNAME + '" /E /N ' + cmd
+ case when phone > 2500
then '/A ExportID="' + convert(varchar(10),(Select coalesce(Max(listid),0) + 1 from tbl_sf3Lists)) + '" '
else ' ' end
, @id=@id+1
from #temp
Where rowno = @id
End
Return
GO
Which fixed database role allows a user to execute a user defined stored procedure while minimizing the amount of permissions given. I think db_Datareader will do the trick.
View 1 Replies View RelatedHi everybody,
I would like to ask that how can I execute a package from a stored procedure.
Laci
Hi,
I am trying to execute the following simple stored procedure. The procedure runs but doesn't create the table I am trying to create and doesn't insert the records into the table I created. But again, the procedure runs without any errors.
Can someone please correct the syntax so my procedure will run properly. It pretty basic.
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[PremierData1]
AS
IF EXISTS(SELECT 1 FROM sys.sysojects where type='U' AND name='PremierTest') DROP TABLE dbo.[PremierTest]
BEGIN
CREATE TABLE dbo.[PremierTest] (
[AYQ] nvarchar(6) null ,
[CYQ] nvarchar(6) null ,
[Description] nvarchar(50) null,
[PIP] [decimal] (17,2) ,
[BI] [decimal](17,2) Not null,
[PD] [decimal](17,2) Not null,
[COLL] [decimal](17,2) not null,
[COMP] [decimal](17,2) not null,
[DCRAT] [nvarchar](2) null ,
[Agent][nvarchar](3) null ,
) ON [Primary]
insert into dbo.premiertest
select *
from dbo.[new agt type tri 0804]
where dir_ceded_ind = 'c'
END
Thank you for any help provided.
I don't know if this is a newbie question or not, I want SQL Server to automatically execute a stored procedure at the first of each month, how can I do this ?
Regards,
AJ
Be nice to nerds. Chances are you'll end up working for one. (Bill Gates)
Is there a programatic way to execute an SSIS package (passing the appropriate parameters) from within a stored procedure. I've seen some examples using xp_CmdShell, but would rather not go that route if possible
View 1 Replies View RelatedI have a sql server resultset that returns productid numbers. I would like to loop thru this resultset and run a stored procedure using the productid as the input parameter. Any samples would be helpful. thanks
View 3 Replies View RelatedSQL 7.0 Stored Procedure Execute Privileges Only?Does anyone know if a user/pass can be set up to givea sql 7.0 user stored procedure execute privileges only.That way, even if they get into the database, they cando nothing except run the stored procedures.Thanks,Ed
View 3 Replies View RelatedIn SQL Server 2000 DTS
How do I call and oracle stored procedure?
I've tried using the Execute SQL task with the
Exec <my procedure name> ;
and it errors.
I've been searching for the answer on how to execute Oracle Stored procedures from DTS without any luck.
The stored procedure creates the table and data that I want to pump into SQL Server.
Any help would be greatly appreciated.
Thanks!