I'm working on a final project for school. It is a warehouse application. For this application I will need to generate a barcode. I have read some articles online and found out that I could use the code 39 barcode font.
I just don't fully understand how to generate the unique barcode. Could someone please help me? I also would like to store the barcodes in a sql server table. Could I use reports to print the barcode?
I am trying to insert a unique code, like a voucher code, into a table in MSSQL, 10 numbers (0-9) which obviously needs to be unique.
I can code this in ASP, but I think the process could be a bit long winded, i.e. create a key - run a stored procedure to see if it is free if not loop and check again. Surely there would be a way to do this in a stored procedure in one?
So the code would look like 3928492834.
1. Generate Key in SQL 2. Check if not used in column 'kcode' if it is, regenerate and check again.
Any advice would be greatly appreciated, I know how to do this in ASP but bit of a SQL newbie!
Is there any way to auto generate the unique primary key when inserting data in MS SQL? there is a way to create the increasing integer as primary key, but is there any ways other than that?
I need to generate a random 10 digit alphanumeric string that is also unique within a table. My application will be calling a stored procedure to insert this number into the table. This number will be associated with a id from another table. Is it better to generate the random number within sql (and perform the lookup at the same time), then just pass the number back to the calling application ?
If the calling application generates the number, it will also need to make a call to check if its unique. So im thinking it would be best to simply have sql generate this random number, check the number against the table and then insert the new record.
I have a question about adding a unique key column to an existing table.
what i trying to do is that: I have already created a table, now i wanna add a ID column to this table, and generate the values for ID column from 1 to the existing row number. How can I get this done?
Requirements • ALPHANUMERIC FORMAT – > AA00AA00………..ZZ99ZZ99 Last 8 bytes will alternate between 2 byte alpha/2 byte numeric • Generate from Alphabets – A through Z Numbers -0 to 9 • Generate Unique Sequence (No Duplicates). • Must Eliminate letters I and O
Output Expected • AA00AA00………..ZZ99ZZ99 • Using 24 alphabets & 10 digits , 24*24*10*10*24*24 = 3 317 760 000 records
Below is my Sql Function -
CREATE function [dbo].[SequenceComplexNEW] ( @Id BIGINT ) Returns char(8)
The following TSQL code will take a character string and perform the encoding that is necessary to generate a BARCODE 128 formatted string to be used with a BARCODE 128 font.declare @myString varchar(255) select @myString = 'BarCode 1'
-- Define the final holding place of our output string declare @finalArray varchar(255)
-- Define the variables that we'll need to be using declare @checksumTotal int declare @checksum int select @checksumTotal = 104; select @checksum = 0;
-- Start building our output select @finalArray = @startchar
-- Loop through our input variable and start pulling out stuff declare @position int declare @thisChar char(1) select @position = 1 while @position <= len(@myString) begin select @thisChar = substring(@myString, @position, 1) select @checksumTotal = @checksumTotal + (@position * (ascii(@thischar)-32)) select @finalArray = @finalArray + @thisChar select @position = @position + 1 end -- We've gone past the length now
-- Now we need to figure out and add the checksum character select @checksum = @checksumTotal % 103 if @checksum = 0 select @finalArray = @finalArray + @spacechar else -- Barcorde array assumes 0 as initial offset so we need to add 1 to checksum select @finalArray = @finalArray + substring(@asciiString, @checksum+1, 1) -- Now we append the stop character select @finalArray = @finalArray + @stopchar
-- The @final Array represents the barcode encoded string select @finalArray
Hope it helps, Dalton
Blessings aren't so much a matter of "if they come" but "are you noticing them."
I'm using a free barcode font so i can create scannable tickets via reporting services 2k5. When I print the tickets, everything seems fine. But when i export to PDF though, it looks like the barcode font shrunk. All the lines are pulled together, making scanning impossible. Is there a certain setting or so that i can use to ensure the font's width ?
-Update- The weird thing is: when i export it inside visual studio, the barcode is shown as it is supposed to in the pdf !?
I am having an issue exporting a Code 39 barcode to pdf (works fine on RS and excel). Once in pdf it inserts white spaces between the bars to make it unreconizable. I have tried resizing, repositioning and different font sizes. SSRS and SQL are running on Windows Server 2003 Standard Edition Service Pack 1. Is there a hotfix out there for exporting EMF's to pdf's?
hi friends i am new to working in crystal reports in my application i want to display barcode in crystal reports. i was totally confused in this. can u help me..........
Hello all. I need to build a barcode and stuff it in a image control at runtime in SRS. I have the code at it works perfect for webforms etc but not in the actual SRS report itself. In SRS I put the code in the report properties code but it blows up on bitmap, graphics etc so I added the system.drawing and system.drawing.imaging namespace and it still fails with the same error. I'm certain there is a simple fix for this and would greatly appreciate anyones assistance in making this happen.
Error:
There is an error on line 15 of custom code: [BC30002] Type 'Bitmap' is not defined.
Dim ValidCodes As String = "17401644163811761164110012241220112416081604157214361244123014841260125416501628161417641652190218681836183018921844184217521734159013041112109414161128112216721576157014641422113414961478114219101678158217681762177418801862181418961890181819141602193013281292120011581068106214241412123212181076107415541616197815561146134012121182150812681266195619401938175817821974140013101118151215061960195415021518188619661724168016926379"
Dim Digit As Integer = 104
Dim i As Integer
For i = 1 To input.Length
Digit += (i * InStr(1, ValidInput, Mid(input, i, 1)))
I am trying to encode the barcode on the reporting service using SQL server 2005, they told me it is possible to maintain the barcode on exported excel sheet, however, I did not find the barcode on it, only squre black image.
Ok, so I have a report that is generating product labels on a standard mailing lable sheet (30 of them on a 8.5X11 sheet of stock). The whole process works just fine even the printing of the bar codes when I am printing the lables from VS2005's Preview function. However, when I moved the report to our reports server and run the same report, the barcodes don't print out. I have checked, and the barcode font has been installed on the server.
Any suggestions would be greatly appreciated. Thanks! - Eric-
Msg 2601, Level 14, State 1, Procedure DFP_report_load, Line 161 Cannot insert duplicate key row in object 'dbo.DFP_Reports_History' with unique index 'ix_report_history_creative_id'.
The duplicate key value is (40736326382, 1, 2015-07-03, 67618862, 355324). Msg 3621, Level 0, State 0, Procedure DFP_report_load, Line 161
The statement has been terminated.
Exception in Task: Cannot insert duplicate key row in object 'dbo.DFP_Reports_History' with unique index 'ix_report_history_creative_id'. The duplicate key value is (40736326382, 1, 2015-07-03, 67618862, 355324).
A UNIQUE INDEX must inherently impose a unique constraint and a UNIQUE CONSTRAINT is most likely implemented via a UNIQUE INDEX. So what is the difference? When you create in Enterprise Manager you must select one or the other.
What's the difference in the effect of the followings: CREATE UNIQUE NONCLUSTERED INDEX and ALTER TABLE dbo.titles ADD CONSTRAINT titleind UNIQUE NONCLUSTERED
I found there're two settings in Indexs/Keys dialog box of the management studio, Is Unique, and Type. The DDL statements above are generated by setting Is Unique to yes plus Type to Index, and just Type to Unique Key, respectively. What's the difference between them?
Hi everyone, I need urgent help to resolve this issue... As far as the performance goes which one is better.. Unique Index(col1, col2) OR Unique constraint(col1, col2) ? Unique constraint automatically adds a unique index and unique index takes care of uniqueness then whats the use of unique constraint ?
BOL says a unique constraint is preferred over a unique index. It also states that a unique constraint creates a unique index. What then is the difference between the two, and why is a constraint preferred over the index?
hi team, .Can i create umique constraint with out unique index.when i am creating a unique constraint sql creates a unique index (default) can i have only unique constraint ?
I am having a problem trying to figure out the best way to get the results I need. I have a table of part numbers that is joined with a table of notes. The table of notes is specific to the part number and user. A row in the notes table is only created if the user has entered notes on that part number. I need to create a search that grabs all matches on a keyword and returns the records. The problem is that it currently returns a row from the parts table with no notes and a separate row with the notes included if they had created an entry. It seems like this should be easy but it eludes me today. Here is the code
Code Snippet create procedure SearchPartKeyword ( @Keyword varchar(250) = null, @Universal_Id varchar(10) = null ) as select p.PartNumber, p.Description, p.ServiceOrderable, n.MyNotes, p.LargestAssembly, p.DMM, p.Legacy, p.Folder, p.Printer from Parts p inner join notes n on p.PartNumber = n.Identifier where n.Universal_ID = @Universal_ID and p.Description like @Keyword union select p.PartNumber, p.Description, p.ServiceOrderable, '' as MyNotes, p.LargestAssembly, p.DMM, p.Legacy, p.Folder, p.Printer from Parts p where p.Description like @Keyword
and the results: PartNo Description SO Notes LA DMM Legacy Folder Printer de90008 MAIN BOARD 1 DGF1 114688 0 0 0 de90008 MAIN BOARD 1 I love this part Really I do DGF1 114688 0 0 0
This could return multiple part numbers and If they have entered notes I want the row with the notes
Hello everybody,I was configuring a SqlDataSource control using SQL Authentication mode.I first added a database file (testdb.mdf) through Solution Explorer-Add New Items. Then through Database Explorer I created a table named "info"Then while configuring the SqlDataSource control I used the SQL Authentication mode and attached the "testdb.mdf" database file.Test Connection showed success. But when I hit the Ok button of the wizard it displayed the following error message:Failed to generate a user instance of SQL Server. Only an integrated connection can generate a user instance.While configuring the SqlDataSource control I clicked "New Connection". Under Data Source section I tried both Microsoft SQL Server and Microsoft SQL Server Database File. And in both the cases I attached a databese file(testdb.mdf). Plz enlighten me on this.Thanks and Regards,Sankar.
create table Test ( [recId] [int] identity(1, 1) not null, [code] [varchar](50) not null, [prime] [bit] not null constraint [DF_Test_prime] default (cast(0 as bit)), constraint [PK_Test] primary key clustered ( [recId] ) with fillfactor = 90 on [primary] ) on [primary] go
insert into Test (code, prime) values ('AVA', cast(1 as bit)) insert into Test (code, prime) values ('BUS', cast(1 as bit)) insert into Test (code, prime) values ('BUS', cast(0 as bit)) insert into Test (code, prime) values ('BUS', cast(0 as bit)) insert into Test (code, prime) values ('CAR', cast(1 as bit)) insert into Test (code, prime) values ('CAR', cast(0 as bit)) insert into Test (code, prime) values ('RLW', cast(1 as bit)) insert into Test (code, prime) values ('RLW', cast(0 as bit)) insert into Test (code, prime) values ('RLW', cast(0 as bit))
select * from Test
I need to create a constraint on this table that will not allow me to have two rows that are prime for the same code. So the following insert statement should fail:
-- This should fail insert into Test (code, prime) values ('RLW', cast(1 as bit))
Hi! When MS published starter kits there were files .sql in App_Data. This files contained some sample data for a DB. How to create such files when I have database with data ? Jarod
One of my first tasks on my current project was to generate all of the SQL scripts needed to rebuild the database. Of course, one of the catches was that everything needed to be separated out (table columns in different script from PKs different from FKs different from DEFAULTs, etc., etc.). And we wanted our own comment block inserted. So, I couldn't just use the Generate SQL Script from Enterprise Manager and be done with it. I was going to need to do some more work. Well, here's one of the scripts I wrote to build the FK scripts. Execute this script, then copy & paste the results into a new window. Break apart into separate .sql files as desired.
NOTE: Be sure to show results in Text (not grid) and change the display options in QA to return more than just 256 characters.
/*************************************************************************************************** Author: Mark Caldwell Date: 11/15/2002 Descrip: Generate scipt commands to ADD FOREIGN KEY CONSTRAINTS for constraints already in DB.
NOTE: Be sure to set your Tools/Options/Results/Maximum Characters per column to a large enough number (such as 2000) to display the entire command. ***************************************************************************************************/
SELECT '---------------------------------------------------------------------------------------------------- -- ' + so2.name + ' to ' + so3.name + ' ---------------------------------------------------------------------------------------------------- IF OBJECTPROPERTY(OBJECT_ID(N''' + so1.name + '''), ''IsForeignKey'') = 1 BEGIN ALTER TABLE ' + so2.name + ' DROP CONSTRAINT ' + so1.name + ' PRINT '' -- DRP - ' + so1.name + ''' END G' + 'O
' FROM sysforeignkeys sfk JOIN sysobjects so1 on sfk.constid = so1.id JOIN sysobjects so2 on sfk.fkeyid = so2.id JOIN sysobjects so3 on sfk.rkeyid = so3.id JOIN INFORMATION_SCHEMA.COLUMNS ISC1 on so2.name = ISC1.TABLE_NAME AND sfk.fkey = ISC1.ORDINAL_POSITION JOIN INFORMATION_SCHEMA.COLUMNS ISC2 on so3.name = ISC2.TABLE_NAME AND sfk.rkey = ISC2.ORDINAL_POSITION ORDER BY so2.name