Hi,
I used OLE DB for oracle connection provider, it takes only Server name, User id, Password but along with it,
I want to give it Database name like in OLE DB for Sql Server.
Is it possible to provide it in some other way, so that i can put DataBase name directly also.
Thanks
Hi,
I have installed MS SQL Server 2005 and Service Pack 2 on a new Windows 32-bit environment. I also installed the 32-bit 10g client (the Administrator option). The tnsnames.ora file is configured properly and I can tnsping to the Oracle database without any issues. I have created a package in Visual Studio and it runs successfully when I execute the job manually. I saved the package to the MS SQL Server and when I log into Management Studio to create a job for this package, I receive the following error:
Message
Executed as user: xxxSYSTEM. ...rsion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:42:37 AM Error: 2007-10-10 10:42:37.28 Code: 0xC0202009 Source: x Connection manager "x.x" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed.". End Error Error: 2007-10-10 10:42:37.28 Code: 0xC020801C Source: Data Flow Task OLE DB Source [18] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method ca... The package execution fa... The step failed.
I have created the package and logged into the server with the same ID to set up the job. And I have set the ProtectionLevel property to "Don't Save Sensitive Data" since I know this has been an issue in the past when I tried automating the job. I've four posts regarding this error message on the MSDN forums that aren't helpful at this moment - I'm hoping that someone will have found a solution since those posts. Any suggestions are welcomed.
Thanks for your help!
Sue
Hi
I have a number of scripts that run against an oracle server to retreive data to manipulate before populating a sqlserver database. I am connecting using an Odbc connection and using the DataReader Source to read from the Oracle table. It all seems to work ok.
When I have tried to extract data from an Oracle view in the same way it doesn't seem to work. The error message mentioned the PrimeOutput() method and error code 0xC02090F5. The view is very big so is it possible that the connection simply timed out?
Any ideas?
Thanks
B
Hi,
I want to make a SSIS package with Oracle and deploy it in no of oracle databases, for it every time I have to open package and change connection information.
How can I make oracle connection information as variable value so that when I deploy my package on Oracle database it will pick all oracle connection information(User Id, Pwd, Server Name) automatically.
Please let me know about this.
Thanks
Hi All!
I'm writing a custom component in c# for SSIS and I have a problem with AcquireConnection...
I wrote this code:
public override void AcquireConnections(object transaction)
{
if (ComponentMetaData.RuntimeConnectionCollection[0].ConnectionManager != null)
{
ConnectionManager cm = DtsConvert.ToConnectionManager(ComponentMetaData.RuntimeConnectionCollection[0].ConnectionManager);
ConnectionManagerAdoNet cmAdo = cm.InnerObject as ConnectionManagerAdoNet;
if (cmAdo == null)
throw new Exception("The ConnectionManager " + cm.Name + " is not an ADO connection.");
this.conn = cmAdo.AcquireConnection(transaction) as OracleConnection;
}
but the 'conn' is ALWAYS null...
I tried
this.conn = ((IDTSConnectionManagerDatabaseParameters90)cmAdo).GetConnectionForSchema() as OracleConnection;
too, but no result: the 'conn' is null again...
If I use oledbconnection or sqlconnection instead of oracleconnection the method works fine... I really don't understand
could you help me plz?
Hi There,
In SSIS package development environment, I was able to connect to an oracle database and pull data into my sql server database. I installed the client tools for oracle and I put an entry into the tnsnames.ora and I was able to connect.
But in production environment, if I deploy the package on sql server, I was wondering if I had to do the same job of downloading the oracle client tools onto my production machine --which creates a tnsnames.ora file to it default location and then edit it with tthe tns entry-- or is there a better way to do this--avoiding the download?
Can somebody plzz help me ?
Thanks.
Hi,
I have a package connecting to oracle database ,this was developed on 32 bit Windows OS now i moved the same to 64 bit OS and it fails to connect to oracle database.
I have created system DSN and tested it was successfull.
In my package i am using ado.net connection object ,I am using ODBC data provider.I select the Data source in the drop down .provide user name and password and when i hit on test connection it fails with the following message
Test connection failed because of error in initilizing the provider error[08004]
[oracle][odbc][ora]ORA 12154 : TNS could not resolve the connect identifier specified
[Error]IM006[Microsoft][ODBC driver manager] drivers SQL setconnectattr failed
Any help on this will be appreciated
Note:- even though the OS is 64 bit i am using 32 bit ODBC as BI studio can only access 32 bit odbc
Hello,
On my dev server I have working ssis packages that use connections Microsoft OLEDB provider for Oracle MSDAORA.1 and Oracle provider for oledb and OracleClient data provider.
I use one or the other according to my needs.
In anticipation and to prepare for the build of a new production server, I have build a test server from scratch and deployed to it the entire dev.
Almost everything works except Microsoft OLEDB provider for Oracle.
ssis packages on the test machine will return an error
Error at Pull Calendar from One [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "one.oledb" failed with error code 0xC0202009.
Error at Pull Calendar from One [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
[Connection manager "one.oledb"]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.".
I have used the same installers for OS, SQL and Oracle SQL*Net on both dev and test machines. The install and then the restore/deployment on Test went fine.
Does anyone could point me to the right direction to solve this issue?
Thanks,
Philippe
Hi,
I have a table in SQL Server 2005 which has [Id] and [Name] as its columns.
I also have a Oracle database which has a similar table.
What I want to do is as follows:
In a SSIS package, I want to pick up details from SQL Server and update the Oracle table. And then should be done without using a linked server connection.
Can someone guide me as to how I can specify a update statement in the destination dataflow.
Thanks.
Hi when i am using OLDB Command for Update Existing Records the Follwing ERror Code I am getting . Any one pls help me on this one.
1)[DTS.Pipeline] Error: The ProcessInput method on component "OLE DB Command 1" (9282)
failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method.
The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
2)
[OLE DB Command 1 [9282]] Error: An OLE DB error has occurred. Error code: 0x80040E10.
3)
[OLE DB Command 1 [9282]] Error: An OLE DB error has occurred. Error code: 0x80040E10.
Hi,
This might seems a little 'out there', but has anyone tried doing ETL from an Oracle 10g ODS into an Oracle 10g DW, and from there into SSAS2005 cubes?
Any caveats houghtscomments on doing this?
Thanks,
JGP
When I try this code in an SSIS "Script Task":
Dim dbConnectionManager As ConnectionManager = Dts.Connections(0)
Dim dbConnectionRaw As Object = dbConnectionManager.AcquireConnection(Nothing)
Dim dbConnection As OdbcConnection = CType(dbConnectionRaw, OdbcConnection)
I get this error:
Unable to cast COM object of type 'System.__ComObject' to class type 'System.Data.Odbc.OdbcConnection'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface.
I'm just trying to get a basic database connection from the DTS package in my
script task. Is there a better way to do this? Preferably, I would use ADO.NET
rather than the old COM stuff. However, if SSIS still requires the use of COM,
that's fine as well, as long as I can fix the above code.
Thanks in advance!
I'm a newbie to SSIS so this question may cause people to point and laugh. I apologise if that's the case.
I have a configuration database that holds connection details to a remote database. I want to use these connection details to dynamically create a new connection to some remote database.
I usually work in with C# where this would be simple but I can't find how to do this using SSIS.
I have found people using configuration files but as I already have my connection data in a table I don't really want to strip it out. (Also, is it a security risk to have database connection strings stored in a config file?)
I have been able to implement a custom script object to build the connection string and assign it to a user variable within the package but can't find any way to then use that variable to connect to the remote database.
Can anyone help?
I am trying to dynamically create the connection to a database within an SSIS package.
the requirement is to allow the user to pass through the database as a variable and that variable will dynamically create the connection string in the connection manager.
Is this possible, if so how?
I am trying to dynamically change my initial catalog in a SSIS project. Each day I get a snapshot of data from the production server. I am performing ETL on that database and loading it into my warehouse. I am trying to put something together so that each day I get the latest snapshot and if its newer then my most recent one I pass that new catalog into the connection manager. I can already run the sql script to compare the two catalogs but I can't populate the connection manager.
View 3 Replies View RelatedI added a connection (ADO.NET) object by name testCon in the connection manager - I wanted to programmatically supply the connection string. So I used the "Expressions" property of the connection object and set the connectionstring to one DTS variable. The idea is to supply the connection string value to the variable - so that the connection object uses my connection string.
Then I added a "Backup Database Task" to my package with the name BkpTask. Now whenever I try to set the connection property of BkpTask to the testCon connection object, by typing testCon, it automatically gets cleared. I am not able to set the connection value.
Then after spending several hours I found that this is because I have customized the connection string in testCon. If I don't customize the connection string, I am able to enter the "testCon" value in the connection property of the BkpTask.
Is this an intrinsic issue?
I need a way to connect to an Oracle database and pull the information from that database into a Sql Server Database. An Oracle gateway is not an option.
Is there a way to set up an odbc connection to connect to the database or is there another way to connect?
Thank you,
Anita Ossowski
I've created a SQL stored procedure and would like to connect to an Oracle database & query results within the procedure. Is this possible?
View 1 Replies View RelatedI am moving dta afrom an Oracle source to SQL serevr 2005 using SSIS
Used: Provider: Microsoft OLE DDDB provider for Oracle and typed in Server and username with password.
When executed the package with defaul settimngs( Package ProtectionLevel: EncrptSensitiveWith userkey OR DONTSAVESENSITIVE, EncrptAllwithPassword) and Isolationlevel: serializable/ read comitted) the package responded fine.
When I try to do 'Package Configuration' and type in password in config file the package doesn't responds. it gives following error.
TITLE: Microsoft Visual Studio
------------------------------
Error at Package2 [Connection manager "DEV04.XYZ"]: An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Error at Data Flow Task [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "DEV04.XYZ" failed with error code 0xC0202009.
------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
BUTTONS:
OK
------------------------------
I also get this error:
Executed as user: XYZUHSQLServer. ...042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:01:42 PM Error: 2008-05-19 13:01:43.22 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTSassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-05-19 13:01:43.96 Code: 0xC0202009 Source:ExtAWMData Connection manager "XYZ ABC" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E4D Description: "ORA-01017: invalid username/password; logon denied ". End Error Error: 2008-05-19 13:01:43.96 Code: 0xC020801C... The package execution fa... The step failed.
Please advice on
1) Selection of provider for Oracle connection
2) ProtectionLevel
3) Isolation Level
4) Package configuration - Connection Strings (MSDAORA.1)
5) Publishing the package on Server best way.
Thnak a lot for all your valuable time and efforts.
AWM
I've installed 32 and 64 bit oracle drivers. I was testing running the two different dtexec.exe programs the other day, logged in as the sql agent and they both worked. Running the 64 bit as a job did not work. 32 bit does not work, since the agent process is 64 bit, from what I understand.
Today I'm working on it again and trying the same steps. Running the 32 bit executable dtexec is now returning "not a valid win32 executable". I swear this worked the other day, and works on our other server.
Running the 64bit executable from the agent just hangs up on this log entry:
HRD1.Cardiff (my oracle connection)
ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.
Anyone know what is going on?
http://support.microsoft.com/kb/918760/
I read this article, but didn't think it applied,since I chose for protectionLevel = sql to handle permission (I think they ) -
So I created a proxy using my credentials and gave it access to cmdexec and ssis and it worked. Can anyone explain this to me??
Hi,
I have created a simple report that reads data from Oracle within Visual Studio. I have no problem with previewing the report within Visual Studio. When I deploy the report to the Report Server (same machine) and try to open the report through Report Manager, I get the following error message:
An error has occurred during report processing.
Cannot create a connection to data source 'xxxx'.
System.Data.OracleClient requires Oracle client software version 8.1.7 or greater.
I am aware of the following issue that requires extra security to be assigned to the Oracle directories: http://support.microsoft.com/Default.aspx?kbid=870668
Even after applying the Read/Execute access to the Network Service account that is running the Reporting Service, I still get the error message.
Can anyone help me with the debugging of this issue?
Thanks,
Ben
I have created reports in SQl Server 2005 Reporting Services using an Oracle Data Sources. When I Preview the report in VS 2005, It runs fine but when I deploy it, it fails to make a coonection to the oracle data source.
Reports off the SQL Server Data Sources arerunning fine.
Can any one out there help me out on this. I will really appreaciate.
Regards,
Sam.
I am having some difficulty to update a record in a table from SQL Server 6.5 to Oracle 7.3 DB.
Basically I want to write a insert trigger in Sql Server 6.5 table and I want to update the same inserting record to Unix Oracle table. I tried by writing a DLL and use that in SQL Server External Stored Procedure, but I dont know how to pass the parameter for that. Parameter here is record which I want to insert in to Oracle Table.
Is there any easy way to do that? Did any body did that before? Please help me out.
Thanks a lot
We are in the process of setting up some type of interface between 2 applications that utilize SQL Server(ours) and theirs which utilizes Oracle. These servers will actually sit in the same server room. My thought was to take the simple approach of each DB setting up views needed by the other and assigning a user and security so the other DB can look at the data. We currently do this in house. THeir solution is to use a somewhat sophisticated mesaging system which will pass XML information back and forth between the systems. I hate to take the simpleton approach but why go through all that trouble where a simple view not only provides the same functionality, but is a dynamic as it gets. If anything goes wrong with the messaging system itself or problems with a specific message this needs to be resolved before the data is available. Non of this is a problm with the view. Any input from anyone who has this in place(either solution) appreciated. Or any arguments against my point of view
View 1 Replies View RelatedHi,For a customer we have implemented a datawarehouse with a connection toOracle. From the beginning of the project the connection to Oraclegives troubles. The next morning is the connection still active andwhen the customer looks in the processes of SQL Server a " Wait type,RESOURCE_SEMAPHORE." is shown. For what i know. SQL Server is waitingfor a resource, in this case Oracle but doesn't tell me anything aboutwhat could be the problem.The customer uses the Oracle driver instead of a microsft oracledriver.What could it be? and how can we tackle this problem? Are there ways tolook from Oracle point of view? Can we monitor something?Greetz,Hennie
View 2 Replies View RelatedHi,
We are trying to change our current SSRS reports to point to an Oracle 10g database. I can connect to the Oracle db from the report server via the ODBC Administrator and also through the BI 2005 studio. The connections work fine. However, when I publish the reports and try to run them from the web I always get a connection error. When I use the oracle connection it acts as if it doesn't see the oracle client and when I use ODBC it throws a werid 114 error.
Is there anything I am missing? I just don't understand why the report will work in BI Studio, but not when it is published (on the same machine)?
Any thoughts?
S
Hi,
I'm trying to get some developers going with ssis on their desktops running
XP sp 2
Microsoft SQL Server Integration Services Designer
Version 9.00.3042.00
Oracle client drivers 9.2.0.1.0
Oracle Enterprise 8.1.7.4.0 and 9.2.0.1.0
I have the same setup on my machine and it's working fine. I duplicated steps I used to get data on the develoeper machine and got these errors.
Code Block
Pre-Execute
Execute phase is beginning.
Execute phase is beginning.
PrimeOutput will be called on a component. : 1 : OLE DB Source
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-01403: no data found".
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-01403: no data found".
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
I'm at a loss of where to go next and I need to get these guys rolling!
Next step is to reinstall drivers...but I'm doubting that is going to have any effect.
Thanks for any help
The problem being faced is : I am unable to access the oracle data through DTS Transform Data Task or Data Driven Query Task.
I have added the connection object . The test connection succeeds but when I move to the properties of either TDT or DDQ , It just hangs up
I have SQL Server 2000 and am using DTS to simply import some data located on a remote Oracle DB.
If I have the following information:
TNS Name:
ThisApp.world
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = tcpxxx.world)
(PROTOCOL = TCP)
(Host = SomeHost)
(Port = 1234)
)
)
(CONNECT_DATA =
(SID = App)
(GLOBAL_NAME = ThisApp.world)
)
)
And I also have the name of the Table.
Using the DTS Wizard, on the Choose a Data Source screen, I pick the following:
Data Source: Microsoft ODBC Drive for Oracle
Server:
Username:
Password:
I don't know what I should put into the other fields, given what I have above, i.e. what to put in for Server, Username, and Password! Or should I use a different procedure to import this Oracle data? I am almost positive I was not supplied the username/password. I was told I could connect given the above TNS information. What do you all recommned?
Your assistance will be greatly appreciated.
Hi
I am trying to switch between oracle and sqlserver databases to read the source data. I have used a parameter file to specify the connection parameters. For SQLserver the connection looks like in the file as below:
<?xml version="1.0"?><DTSConfiguration><DTSConfigurationHeading><DTSConfigurationFileInfo GeneratedBy="abvsh" GeneratedFromPackageName="Package" GeneratedFromPackageID="{8A304BF7-5325-4079-9D92-2B9BBF8793AA}" GeneratedDate="1/23/2007 4:46:08 PM"/></DTSConfigurationHeading><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[ConnectionString]" ValueType="String"><ConfiguredValue>Data Source=dl;Initial Catalog=PM_DW;Provider=SQLNCLI.1;Integrated Security=SSPI;Auto Translate=False;</ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[Description]" ValueType="String"><ConfiguredValue></ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[InitialCatalog]" ValueType="String"><ConfiguredValue>PM_DW</ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[Name]" ValueType="String"><ConfiguredValue>dl.PM_DW</ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[Password]" ValueType="String"><ConfiguredValue></ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[ProtectionLevel]" ValueType="Int32"><ConfiguredValue>1</ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[RetainSameConnection]" ValueType="Boolean"><ConfiguredValue>0</ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[ServerName]" ValueType="String"><ConfiguredValue>dl</ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[UserName]" ValueType="String"><ConfiguredValue></ConfiguredValue></Configuration></DTSConfiguration>
the pacakge runs fine. But when i change the connection to Oracle, it gives me error.
The config file looks like when i put oracle connection is as follows:
<?xml version="1.0"?><DTSConfiguration><DTSConfigurationHeading><DTSConfigurationFileInfo GeneratedBy="I2vshrivas" GeneratedFromPackageName="Package" GeneratedFromPackageID="{8A304BF7-5325-4079-9D92-2B9BBF8793AA}" GeneratedDate="1/23/2007 4:46:08 PM"/></DTSConfigurationHeading><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[ConnectionString]" ValueType="String"><ConfiguredValue>Data Source=pm62;User ID=pcm_62;Provider=OraOLEDB.Oracle.1;Persist Security Info=True;</ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[Description]" ValueType="String"><ConfiguredValue></ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[InitialCatalog]" ValueType="String"><ConfiguredValue></ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[Name]" ValueType="String"><ConfiguredValue>dl.PM_DW</ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[Password]" ValueType="String"><ConfiguredValue></ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[ProtectionLevel]" ValueType="Int32"><ConfiguredValue>1</ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[RetainSameConnection]" ValueType="Boolean"><ConfiguredValue>0</ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[ServerName]" ValueType="String"><ConfiguredValue>i2pm62</ConfiguredValue></Configuration><Configuration ConfiguredType="Property" Path="Package.Connections[dl.PM_DW].Properties[UserName]" ValueType="String"><ConfiguredValue>pcm_62</ConfiguredValue></Configuration></DTSConfiguration>
The error which i get when running from oracle source is this:
Information: 0x40016041 at Package: The package is attempting to configure from the XML file "C:oraTOsql-DataTXIntegration Services Project1Integration Services Project1Integration Services Project1 estConfig.dtsConfig".
SSIS package "Package.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Error: 0xC0202009 at Package, Connection manager "dl.PM_DW": An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Error: 0xC020801C at Data Flow Task, OLE DB Source [1]: The AcquireConnection method call to the connection manager "dl.PM_DW" failed with error code 0xC0202009.
Error: 0xC0047017 at Data Flow Task, DTS.Pipeline: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Data Flow Task, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Data Flow Task: There were errors during task validation.
SSIS package "Package.dtsx" finished: Failure.
The program '[7264] Package.dtsx: DTS' has exited with code 0 (0x0).
Please let me know if you guys have any suggestion in what i am doing wrong.
Thanks,
Vipul
Hi, I dont know if I should post this question here, or on oracle forums, but here goes ...
I made a simple package that performs 2 Excecute SQL Tasks, one task does a select query on a SQL Server DB Table, the other task does a select query on an Oracle DB Table.
The package runs fine in BIDS when debugging, but when I deployed the package to a file system and added it to an sql server agent Job, it all went wrong ...
I tried the ms oledb dataprovider (ole db) for oracle but also the oracleclient data provider (ado.net) but the package always fails.
The error messages in the logfile are these:
event
OnError
computer
ComputerName
operator
NT AUTHORITYSYSTEM
source
Execute SQL Task PLSQL
sourceid
{B29C4FC9-3345-4657-8680-F770B8C2E136}
executionid
{7312A7EC-2555-4268-BB29-38659507BADD}
starttime
14/04/2006 16:40
endtime
14/04/2006 16:40
datacode
-1073573396
databytes
0x
message
Failed to acquire connection "aaa.bbb.oracleClient". Connection may not be configured correctly or you may not have the right permissions on this connection.
the OnError logrow for the package itself says almost the same.
Now my question is: What do I need to configure to get it all working? I think I need to configure the oracle db no? What should I configure? ...
Hi,
I was trying to connect to Oracle Source in SSIS
1. Err: Test connection failed because of an error in initializing provider. Oracle Client and networking components were not found
Sol: I installeed the Oracle Client tools
2. Err: ORA -12154: TNS: Could not resolve teh connect identifier specified
Sol: Then I point out the TNS file
3. Now I coonect the Oracle db . I go to Connection Manager . Specifies the provide as: Native OLE DB Oracle Provide for OLE DB, Select my DB, provide teh user name and password. and check if the connection passed.
Then in my data Flow Task when I add this source and check the Colmns its gives me an error./ sort of warning
The component reported the following warnings:
Warning at {C947B.......} [Ole DB Source[1]]: Cannot retrieve the column code page info from the OLE DB provider. if the components supports teh "DefaultCodePage" property, the code page from that property will be used.....
Will this warning has an significance. i dont see any error in my output data. but is there something I m doing wrong.
4. When I set my ProtectionLevel under Security in package property to "Dont Save Sensitive" in order to easily configure the package I m getting this error: failed Validation. The default one was EncryptSensitiveWithUserKey then its running smoothly.
Can somebody advice me on this?
I addded the all the errors and solution for 1 and 2 becuase in that way this will be helpful in future.
i have successfully implemented a dynamic connection string based on a dropdown list of environments (dev, test, prod). it works well during testing in the vs2005 ide; but once i deploy it to the rs server, it complains that the credentials are not stored in the rs server database and won't run the report.
as in most large organizations, the developers do not have control over the rs server, so i cannot manipulate rs config or web config files on the server side; so, how do i get past this obstacle?
thanks in advance