i have a query in which i need to show all rows of same id in singel row and last column should be comma seperated .my query is :
BEGIN TRY
SET NOCOUNT ON
DECLARE @l_numberOfRecordsInserted INT
-- Check if valid Application User ID is passed
IF ( @i_AppUserId IS NULL ) OR ( @i_AppUserId <= 0 )
[code]....
so last column section name should come as comma seperated .
Just messing about with a silly little problem in SQL which has me stumped!
The problem goes like this;
There are lots of books.
There are lots of authors.
Every book has atleast one author (primary author).
Some books have a secondary author too!
Books(BookId, BookName)
Authors(AuthorId, AuthorName)
BookAuth(BookId, AuthorId, PrimaryAuth)
Where primary auth is a bit field; 1 denotes primary, 0 denotes secondary.
The problem is trying to return a single line per book - something like
BookNamePrimary AuthorSecondary Author
Book 1DaveNULL
Book 2JohnDave
Book 3LauraJohn
The following code is the little test script I've written which you may wish to utilise
IF EXISTS (SELECT 1 FROM sysobjects WHERE type = 'U' AND name = 'Books') BEGIN
DROP TABLE Books
END
IF EXISTS (SELECT 1 FROM sysobjects WHERE type = 'U' AND name = 'Authors') BEGIN
DROP TABLE Authors
END
IF EXISTS (SELECT 1 FROM sysobjects WHERE type = 'U' AND name = 'BookAuth') BEGIN
DROP TABLE BookAuth
END
CREATE TABLE Books (bookid int, bookname varchar(50))
CREATE TABLE Authors (authorid int, authorname varchar(50) )
CREATE TABLE BookAuth (authorid int, bookid int, primaryauth bit)
GO
INSERT INTO Books
SELECT 1, 'MS Access Book'UNION ALL
SELECT 2, 'Microsoft Excel for Peanuts' UNION ALL
SELECT 3, 'Some Autobiography'UNION ALL
SELECT 4, 'SQL for Beginners'UNION ALL
SELECT 5, 'Advanced T-SQL'UNION ALL
SELECT 6, 'I can''t think of another title'
INSERT INTO Authors
SELECT 1, 'Dave'UNION ALL
SELECT 2, 'Steve'UNION ALL
SELECT 3, 'John'UNION ALL
SELECT 4, 'Joanne'UNION ALL
SELECT 5, 'Christina'UNION ALL
SELECT 6, 'Alex'
INSERT INTO BookAuth
SELECT 1,1,1 UNION ALL
SELECT 2,1,0 UNION ALL
SELECT 1,2,1 UNION ALL
SELECT 1,3,1 UNION ALL
SELECT 3,3,0 UNION ALL
SELECT 4,4,1 UNION ALL
SELECT 4,5,1 UNION ALL
SELECT 5,6,1 UNION ALL
SELECT 6,6,0
SELECT * FROM bookauth
DROP TABLE Books
DROP TABLE Authors
DROP TABLE BookAuth
It should be so easy - but I can't get it so far! :D
Hi,
I am executing the folowing statements in my stored procedure, I want to ask that can all these staments will be executed and combined in a single line of code, meaning can we run all these statemnts in a single line. if not, then any other optimized way to perform this task and other way which will execute with less load on the server.
Code Block
SET NOCOUNT ON
TRUNCATE TABLE WebNew_T_Dump
TRUNCATE TABLE WebNew_TOD_Dump
TRUNCATE TABLE WebNew_T_S_Dump
TRUNCATE TABLE WebNew_AT_Dump
TRUNCATE TABLE WebNew_MMM_Dump
TRUNCATE TABLE WebNew_MMT_Dump
TRUNCATE TABLE WebNew_TC_Dump
TRUNCATE TABLE WebNew_TRW_Dump
TRUNCATE TABLE WebNew_SM_Dump
TRUNCATE TABLE WebNew_TS_Dump
TRUNCATE TABLE WebNew_TL_Dump
TRUNCATE TABLE WebNew_TLC_Dump
TRUNCATE TABLE WebNew_TS_Dump
TRUNCATE TABLE WebNew_TP_Dump
TRUNCATE TABLE WebNew_TSS_Dump
TRUNCATE TABLE WebNew_IT_Dump
Thanks,
When I edit package configuration files inside of Visual Studio, it puts all the XML on a single line. Does anyone know how to automatically spread the information onto multiple lines, to make comparing file differentials easier.
Thank you,
Mike
I need to, ultimately, create a flatfile for exporting insurance information to a third-party vendor. Each individual is to have no more than 1 line per file, which contains their coverage information, if any, on 4 different type of insurance. What i need is for 2 fields in a table to determine the output for multiple fields in the flatfile.
What I have so far works, to an extent. If I have insurance types 1, 2, 4 (of types 1-4) required output is (__ = 2 blank spaces):
1A 1B 1C 1D 1E 2A 2B 2C 2D 2E 3A 3B 3C 3D 3E 4A 4B 4C 4D 4E
== == == == == == == == == == == == == == == == == == == ==
Y N __ MD XX Y N __ MD XX N __ __ __ __ Y N __ DN XX
If they have coverage, A always = Y, B always = N, C always = blank(null), D is their ins. type, E is their cov. type(CASE statement). if they DON'T have that type of coverage, A always = N and the remaining field are NULL.
After a lot of work, and scouring a forum or 2, I attempted a whole lot of CASE functions. Below is an sample of code representing the 1x statements. This same code is repeated 4 times with the 1x being altered with 2x, 3x, 4x.
CASE HB.PLAN_TYPE
WHEN '10' THEN 'Y'
ELSE 'N' END AS 1A,
CASE HB.PLAN_TYPE
WHEN '10' THEN 'N'
ELSE ' ' END AS 1B,
' ' AS 1C,
CASE HB.PLAN_TYPE
WHEN '10' THEN HB.BENEFIT_PLAN
ELSE ' ' END AS 1D,
CASE HB.PLAN_TYPE
WHEN '10' THEN (CASE WHEN HB.COVRG_CD ='1' THEN 'XX'
WHEN HB.COVRG_CD ='2' THEN 'YY'
WHEN HB.COVRG_CD ='3' THEN 'ZZ'
ELSE 'WW' END)
ELSE ' ' END AS 1E,
It works to an extent. While the desires/required output it above, the output this produces (same scenario) is:
1A 1B 1C 1D 1E 2A 2B 2C 2D 2E 3A 3B 3C 3D 3E 4A 4B 4C 4D 4E
== == == == == == == == == == == == == == == == == == == ==
Y N __ MD XX N __ __ __ __ N __ __ __ __ N __ __ __ __
1A 1B 1C 1D 1E 2A 2B 2C 2D 2E 3A 3B 3C 3D 3E 4A 4B 4C 4D 4E
== == == == == == == == == == == == == == == == == == == ==
N __ __ __ __ Y N __ MD XX N __ __ __ __ N __ __ __ __
1A 1B 1C 1D 1E 2A 2B 2C 2D 2E 3A 3B 3C 3D 3E 4A 4B 4C 4D 4E
== == == == == == == == == == == == == == == == == == == ==
N __ __ __ __ N __ __ __ __ N __ __ __ __ Y N __ DN XX
While there is supposed to be 1 line, regardless of number of insurance types, it only produces 1 line per type. I first tried this in Access, and was able to get it to work, but it required multiple queries resulting in a crosstab, export to Excel and manually manipulate the data, export to text file to manipulate, import back into Excel to manipulate, import back into Access and finally export into a flatfile. Far too much work to produce a file which is why I'm trying to convert it to raw SQL.
Any assistance in this matter would be greatly appreciated.
Here is some data that will explain what I want to do:
Input Data:
Part ColorCode
A100 123
A100 456
A100 789
B100 456
C100 123
C100 456
Output Data:
Part ColorCode
A100 123;456;789
B100 456
C100 123;456
I tried to set double in bottom border of text file. But it turned out to be single line either Previewing in Designer or Printing or Exporting to PDF. Does anyone have any idea?
View 10 Replies View RelatedAny better way to query SQL 2012 to display the code of a stored proc to a single line. I'm trying to write a script to insert the contents of the procs between my devestprod environments. So people can query a single table for any proc that is different between environments. At the moment I am using the syscomments view and the text column but the problem here is if you get a lengthy proc it cuts it up into multiple rows.
I can get around it by converting the text to a varchar(max) and outer joining the query, but as you can see by my code below I have to try and guess what the maximum number of rows I'm going to get back for my largest proc. If someone adds a new one that returns 8 rows I'm going to miss it with this query.
Select col1.[type],col1.[name],convert(varchar(max),col1.text) + isnull(convert(varchar(max),col2.Text),'')
+ isnull(convert(varchar(max),col3.Text),'')
+ isnull(convert(varchar(max),col4.Text),'')
+ isnull(convert(varchar(max),col5.Text),'')
+ isnull(convert(varchar(max),col6.Text),'')
+ isnull(convert(varchar(max),col7.Text),'')
[Code] .....
I am storing formatted data (including spaces and line breaks) in a single field in a table.
When I run a report on that field, the preview of the report is automatically removing all the extra spaces and line breaks, making the report unreadable.
When exporting the report to PDF or printing it, it shows the line breaks and spaces as expected.
Does anyone know how to make the report preview show the spaces and line breaks?
for MS SQL 2000
I am having :
Table1
ID | N1 | N2 | N3 |
-------------------
12 | A | | |
12 | | B| |
12 | | | C|
how can I get :
12,A,B,C ?
thank you for helping
Using Visual basic 2005
I have a form and set up my datasource, bindings etc.
All works well, adding, updating, and deleting via form to sqlexpress except.....
I have 2 columns set up in sqlserver that get data from muliline textboxes on my form.
Column 1 "Material" is nvarchar(50)
Column 2 "Quantity" is int
The first multine textbox "Material" works fine, eather updating in the textbox or in the Datagridview cell.
the second multiline textbox "Quantity" works when I just put in a number in the first line of the multiline textbox, when I put in the 2nd number on the second line, nothing gets updated.
I I do that in the datagridview cell (Shift-Enter), I get an error.
"System string was not in correct format".
I tried integer.parse, but that dosn't work. I'm assuming it has something to do with the next line ascii code or something like that.
Can anyone out there help with this
How to summarise the data in this table to a single row output per site (2 records for every SiteID). I am based in the UK so the data copied from SQL is in the US format. I can convert this to UK date without any issues.
CREATE
TABLE [dbo].[MRMReadings](
[SiteIncomeID] [int] IDENTITY(1,1)
NOT NULL,
[SiteID] [nchar](5)
NOT NULL,
[Code] ....
Is it possible to return the data in the following format merging 2 lines of data into one output:
SiteID ReadStartDate ReadEndDate ReadStartIncome ReadEndIncome
L0020 19/05/2015 05:00 20/05/2015 05:00 85.98 145.98
L0101 19/05/2015 22:07 20/05/2015 22:14 1,936.08 1,438.89
L0102 20/05/2015 21:16 19/05/2015 21:48 143.65 243.5
I am using SQL 2008 R2.
I'm using a shipping program called endicia professional that allows for database manipulation to make my processing easier. I've managed to fix the database here and there but have had an issue combining orders from a single customer when theybuy more than one item. Ideally I would like to have it combine rows when a customer purchases items going to the same address. To avoid having an issue where the address line is the same ie two people live in the same appt complex and it combines these I thought we could use qualifiers as the purchase will have name, order Id that should be unique enough
Order-id name address sku
1234 John 46 easy ln. A27
1234 John 46 easy ln. B32
Results:
Order-id name address sku
1234 John 46 easy ln. A27,b32
Hi All,
We've a table as in the following format:
PK_Column1
PK_Column2
Issue_Date1
Issue_Amount1
Issue_Category1
Issue_Reject1
Issue_Date2
Issue_Amount2
Issue_Category2
Issue_Reject2
We need to divide it into two new tables as follows:
UniqueID
PK_Column1
PK_Column2
And
UniqueID
PK_Column1
PK_Column2
Sequence_ID
Issue_Date
Issue_Amount
Issue_Category
Issue_Reject
Unique1
1
Issue_Date1
Issue_Amount1
Issue_Category1
Issue_Reject1
Unique2
2
Issue_Date2
Issue_Amount2
Issue_Category2
Unique3
1
xx
xx
Unique4
2
xx
xx
Unique5
3
xx
4
xx
There will be one UniqueID for each row.
We'll get the uniqueID and PK1 and PK2 in a file.
Imp: We need to generate the Sequence_Id depending on number of Issue_dates or Issue_amounts or Issue_Categories or Issue_Rejects as in the above table.
Can we do this without using cursors?
This is going to be one time process.
Any ideas are appreciated.
Thanks,
Siva.
Hi,
I've a temp variable where I'm moving some columns like below:
id
value
type1
type2
0
ab
type1val1
type2val1
0
cd
type1val1
type2val1
0
ef
type1val1
type2val1
1
ab
type1val2
type2val2
1
cd
type1val2
type2val2
1
ef
type1val2
type2val2
What I want to do is group these by their id and get the following o/p
ab,cd,ef type1val1 type2val1
ab,cd,ef type1val2 type2val2
The grouped values need to be separated by commas.
What I'm doing currently:
I'm using a temp variable to put all these values but am unable to coalesce and get the desired o/p.
Can anybody help me out?
Thanks,
Subha
I have a table that contains many columns in a single row and I'd like to split the table so that it has fewer column values and more rows.
My table structure is:
create table #scoresheet
(Decisions varchar(10), DNumericalValue int, DVI varchar(10), DComments nvarchar(255),
Competence varchar(10), CNumericalValue int, CVI varchar(10), CComments nvarchar(255),
Equipment varchar(10), ENumericalValue int, EVI varchar(10), EComments nvarchar(255));
I would like to have three rows with four columns.
What I've done so far is create a stored procedure that uses a table variable:
create procedure sp_splitsinglerow as
declare @Scoresheet_rows_table_var table (
ReviewArea varchar(25),
NumericalValue int,
VI varchar(10),
Comments nvarchar(255));
insert into @Scoresheet_rows_table_var
(ReviewArea, NumericalValue, VI, Comments)
select Decisions, DNumericalValue, DVI, DComments
from #scoresheet
The trouble with this approach is that I have to explicitly name the columns that I insert into the table variable. What I'd really like to be able to is have a loop construct and select the first 4 columns the first time, the second 4 the next time and the last 4 the third time.
Any ideas on how to achieve that?
BTW, I have resolved this issue by suggesting to the Developers that they change the structure of the original table, but I'd still like to know if there is another solution. :)
I have a table which looks like
Low High
-------------------------
cx01 cx04
sn05 sn08
I need output like
Result
-------------
cx01
cx02
cx03
cx04
sn05
sn06
sn07
sn08
How to get this output using sql query?
I am working with some old code that we are trying to clean up and perform some performance enhancements. The performance is now, so Very much better. From over 3 minutes to under 2 seconds.
But I am still trying to get the multiple rows into a single row. I would like to place this into a CTE to get the multiples into a single row. I just cannot get my head around how is the best, most efficient way to write the query.
This is a small example of what the rows look like in the resultset, and what I want to single to be.
DECLARE @BillingCorrect TABLE
(
ContractNumber char(10)
, pc1 int
, pb int
, om int
, vp int
[Code] ....
I am not sure how to write the query to have all the data in a single row.
The stored procedure takes ~ 10 seconds every call. The execution plan is Index seek or clustered index scan almost everywhere . No table spools or lazy loads or key lookups. Cannot share the code or execution plan due to company rules and regulations.Issue is that i am dealing with result set of around 50,000 records . Out of these i have to return 20 records at a single time (which is also customizable i.e 40 / 60/ 150 records in a page). Application cannot handle all 50k records so i have to return 20 records for every stored procedure call.
The result set changes as per the start date and end date which i recieve as parameters. In application there are few Column filters namely- Country(around 50 countries), Outcome(around 6 to 10 values ) . These filters will values in drop down( as excel ) depending on the distinct values in that columns. These filters will be populated on every page, if no filter value is selected.Issue is if user does sorting or filtering any records , this stored procedure is called and every time i have to deal with ~50000 records.
Current Code :
Step 1 ) Get the required result set in temp table .
Step 2) Compute the results on some business rules . (Outcome and SharesAvailable calculation - see attachment)
Step 3) populate filter Columns (Country,Outcome) these values will be comma seperated.
Step 4) Dynamic query to get required result set i.e if user wants only 10 records in single page then TOP 10 . Sorting can be applied on any column mentioned in screenshot.
Hello,
I want two different set of rows in a single output. For example - the query gets records from the same tables, but first condition is a date range of 60 days and value = '1'
then the second condition is a date range of 180 days and value = '2'
Is it possible?
Thanks
I’m trying to return data in a single row.Here’s what my table looks like:
Employee #,Hours Type,Total Hours
1234,Regular,40
1234,OT,8
1234,Regular,36
[code]....
I need the results of my query to total each hours type and group together:
EmpNo,Sum Of Regular, Sum of Overtime,Sum of Doubletime
1234,76,19,12
7777,45,8,5
I don’t know how to get the data returned in a single row.
Hi
I have aproble with stored procedure.I want to take the Data from a table with multiple rows,In the same select statement for the others select statemet.My store Proc is like this..
CREATE procedure spr_Load_TR_AccidentReport_Edit_VOwner
(
@Crime_No varchar(20),
@Unit_ID int
)
as
begin
DECLARE @AD_Driver int,@AC_Cas int,@AV_Owner int,@A_Witness int
DECLARE @Defect_ID varchar(100)
select @AV_Owner=Vehicle_Owner from TBL_TR_ACCIDENT_VEHICLE where Crime_No =@Crime_No and Unit_ID = @Unit_ID
SELECT
TBL_TR_Person_Details.Person_ID,TBL_TR_Person_Details.Person_Name, dbo.TBL_TR_Person_Details.Address1,
dbo.TBL_TR_Person_Details.Address2, dbo.TBL_TR_Person_Details.City_Id, dbo.TBL_TR_Person_Details.State_Id,
dbo.TBL_TR_Person_Details.Nationality_id, dbo.TBL_TR_Person_Details.EMail, dbo.TBL_TR_Person_Details.Phone,
dbo.TBL_TR_Person_Details.zip, dbo.TBL_TR_Person_Details.sex, dbo.TBL_TR_Person_Details.D_O_B, dbo.TBL_TR_Person_Details.Age,
dbo.TBL_TR_Person_Details.Occupation_ID, dbo.TBL_TR_Person_Details.Person_Type,
TBL_TR_ACCIDENT_VEHICLE.Registration_Number,
TBL_TR_ACCIDENT_VEHICLE.Crime_No,
TBL_TR_ACCIDENT_VEHICLE.Vehicle_Owner,
TBL_TR_ACCIDENT_VEHICLE.Vehicle_Type,
TBL_TR_ACCIDENT_VEHICLE.Vehicle_Vanoeuvre,
TBL_TR_ACCIDENT_VEHICLE.vehicle_Make,
TBL_TR_ACCIDENT_VEHICLE.Vehicle_Model,
TBL_TR_ACCIDENT_VEHICLE.Unit_ID,
TBL_TR_ACCIDENT_VEHICLE.RowID,
TBL_TR_ACCIDENT_VEHICLE.UserID,
TBL_TR_ACCIDENT_VEHICLE.Vehicle_Color,
TBL_TR_ACCIDENT_VEHICLE.HP,
TBL_TR_ACCIDENT_VEHICLE.Seating_Capacity,
TBL_TR_ACCIDENT_VEHICLE.Class_Of_Vehicle,
TBL_TR_ACCIDENT_VEHICLE.Unladen_Weight,
TBL_TR_ACCIDENT_VEHICLE.Registered_Laden_Weight,
TBL_TR_ACCIDENT_VEHICLE.Skid_Length,
(select TBL_TR_Person_OutsideDetails.OutSide_state from
TBL_TR_Person_OutsideDetails,TBL_TR_ACCIDENT_VEHICLE where
TBL_TR_ACCIDENT_VEHICLE.Vehicle_Owner = TBL_TR_Person_OutsideDetails.Person_id and TBL_TR_ACCIDENT_VEHICLE.RowID =TBL_TR_Person_OutsideDetails.RowID)[OutSide_state],
(select TBL_TR_Person_OutsideDetails.OutSide_City from
TBL_TR_Person_OutsideDetails,TBL_TR_ACCIDENT_VEHICLE where
TBL_TR_ACCIDENT_VEHICLE.Vehicle_Owner = TBL_TR_Person_OutsideDetails.Person_id and TBL_TR_ACCIDENT_VEHICLE.RowID =TBL_TR_Person_OutsideDetails.RowID)[OutSide_City]
---here I faced the problem-
/*For the above Select only return one rows.But this select willreturn multiple row .I wnat to put that multiple data into a single field with comma*/
(SELECT @Defect_ID = COALESCE(@Defect_ID + ',','') + CAST(TBL_TR_VEHICLE_DEFECT.Defect_ID AS varchar(5))
FROM TBL_TR_VEHICLE_DEFECT,TBL_TR_ACCIDENT_VEHICLE
WHERE TBL_TR_VEHICLE_DEFECT.Registration_Number =TBL_TR_ACCIDENT_VEHICLE.Registration_Number)
select @Defect_ID
FROM
tbl_TR_Accident_report,TBL_TR_Person_Details,TBL_TR_ACCIDENT_VEHICLE
where
tbl_TR_Accident_report.Crime_No=@Crime_No and tbl_TR_Accident_report.Unit_ID=@Unit_ID
AND
TBL_TR_ACCIDENT_VEHICLE.Crime_No=@Crime_No
AND
TBL_TR_Person_Details.Person_ID = TBL_TR_ACCIDENT_VEHICLE.Vehicle_Owner
end
GO
I have a table with only one column as
Emp_Name
A
B
C
D
E
I want to display this data as
Emp_Name
A, B, C, D, E
Is this possible? I am using SQL server 2005.
Any help is appreciated.
Regards,
Vinesh
I have 2 columns (ID, Msg_text) in a table where i need to combine every 3 rows into single row. What would be the best option i have? I know by using 'STUFF' and 'XML PATH' i can convert all the rows into a single row but here i'm looking for every 3 rows into a single row.
View 3 Replies View RelatedHi,
I have two tables of news feed NewsHeader & NewsDetails
NewsHeader:
Time Header
10:15:34 AM News1
10:15:34 AM News1
10:15:34 AM News1
11:19:39 AM News2
11:19:39 AM News2
12:35:04 PM News3
12:35:04 PM News3
NewsDetails
Time Text RowC
10:15:34 AM ABC 1
10:15:34 AM DEFG 2
10:15:34 AM HIJKL 3
11:19:39 AM AABB 1
11:19:39 AM CCDD 2
12:35:04 PM ZZYY 1
12:35:04 PM XXWW 2
Required Output
Time Header Text
10:15:34 AM News1 ABCDEFGHIJKL
11:19:39 AM News2 AABBCCDD
12:35:04 PM News3 ZZYYXXWW
Thank you.
Hi All,
I was wondering is there any way by which i can split a single row in my table into two rows in my table in design of my report. In my table there are 16 rows i cant design table with 16 rows as it will increase size of my report body & it will give problem while exporting. Instead what i want to do is , design a table with two header rows first header with first 8 columns & second with remaining 8 columns.
The table should look like this
//column 1 2
ID NAME
AGE SEX
-----------------------------------------------------------------------------------
2 abc
10 M
-----------------------------------------------------------------
3 def
20 M
Is it possible
Thanks
-- Darshan
DECLARE @emp VARCHAR(1024) declare @emp1 varchar(1024)declare @emp2 varchar(1024)SELECT @emp1 = COALESCE(@emp1 + ',', '') + cast(eid as varchar(10)),@emp = COALESCE(@emp + ',', '') + ename ,@emp2 = COALESCE(@emp2 + ',', '') + desigFROM emp SELECT eid=@emp1,ename = @emp,desig=@emp2
View 1 Replies View RelatedI was wondering if anyone had a suggestion as to how to delete duplicate rows from a table. I have been doing this:
SELECT * INTO TempUsersNoRepeats
FROM TempUsers2
UNION
SELECT * FROM TempUsers3
This way I end up with a total of four tables (the fourth table being the original Users table) and I was hoping that there was a way that I could do this all within the the original Users table and not have to create the three TempUsers tables.
Thanks,
Ron
We just changed over our phone system and the new system uses all of the old extensions except it adds a 1 to the beginning of them. I know that there is a relatively simple way to update my phone extension column to show this, but I can't for the life of me remember what I need to do. Any help?
View 2 Replies View RelatedI've been searching the forums and Google for some help splitting up rows in a table without any luck. I'm not quite sure what to even look for
I have a table is MSSQL 2000 that looks as follows:
Code:
id custnum b1_email b2_email b1_sub b2_sub
------------------------------------------------------------------------
1 123456 b1@host1.com b2@host1.com 0 0
2 654321 b1@host2.com b2@host2.com 1 0
3 321654 b1@host3.com b2@host3.com 0 1
Now... I am hoping create a view that splits these rows up so that only a single email address is on each row. I'd like to split it up as follows:
Code:
custnum email sub
----------------------------------
123456 b1@host1.com 0
123456 b2@host1.com 0
654321 b1@host2.com 1
654321 b2@host2.com 0
321654 b1@host3.com 0
321654 b2@host3.com 1
Any help would be great! I imagine some sort of join command can be constructed using a single table?
I know this isn't right but I'm trying to build a single query in PHP to re write the sortorder column starting at 0 and writing every row in order.
Code:
update categories set (sortorder=0 where catid=32), (sortorder=1 where catid=33),(sortorder=2 where catid=36) where userid=111
PHP Code:
$qt="update categories set ";
for($i=0;$i<$num;$i++){
$a=$i+1;
$qt.="sortorder=$i";
if($a<$num){
$qt.=", ";
}
}
$qt.=" where userid=111";
Using PHP I can amend the loop above to slot in a row I want so I can change the sort order.
unfortunately I'm not sure how to build such a query in mssql, can anyone help?
Hi,
I need to return multiple rows into one single string
Declare @String varchar(1000)
Create table Cus (CusId Int,CusName varchar(10))
Insert into Cus Select 1,'John'
Union All
Select 2,'Bob'
Select * from Cus returns
1John
2 Bob
I need to return the all the rows from Cus table into a single string. The return is dynamic.
I do not know the number of rows returned
My result should be
@String = 1,John,2,Bob
How can i do that ?