How To Get Average Of Average.
Jan 19, 2008
Hi !
I am having this problem. I have a grouping someting like this.
Group1
Resolved Resolution Time Average Resolution Time
30 2904.46 96.82
54 1442.03 26.70
0 0.00 0.00
0 0.00 0.00
------------------------------
Avg : 30.88
Now to calculate the average inside the grouping I have used this
iif(Sum(Fields!ResolutionTime.Value) = 0 ,"0.00",(Sum(Fields!ResolutionTime.Value)/(iif(Count(Fields!ResolvedDate.Value)=0,1,Count(Fields!ResolvedDate.Value)))))
I am at a loss how to calculate the group footer (Result = 30.88 ) which is equal to (96.82 + 26.70 + 0 + 0 ) / 4 . This is the result from the existing Crystal report. I am trying to convert this report to reporting services. Now I cannot nest aggregate functions and also the row number can be dynamic I am confused how to resolve it.
Any ideas will be greatly appreciated.
Thanks in advance.
--Abbi.
View 9 Replies
ADVERTISEMENT
Jun 21, 2015
Calculation of an average using DAX' AVERAGE and AVERAGEX.This is the manual calculation in DW, using SQL.In the tabular project (we're i've noticed that these 4 %'s are in itself strange), in a 1st moment i've noticed that i would have to divide by 100 to get the same values as in the DW, so i've used AVERAGEX:
Avg_AMP:=AVERAGEX('Fct Sales';'Fct Sales'[_AMP]/100)
Avg_AMPdollar:=AVERAGEX('Fct Sales';'Fct Sales'[_AMPdollar]/100)
Avg_FMP:=AVERAGEX('Fct Sales';'Fct Sales'[_FMP]/100)
Avg_FMPdollar:=AVERAGEX('Fct Sales';'Fct Sales'[_FMPdollar]/100)
The results were, respectively: 701,68; 2120,60...; -669,441; and finally **-694,74** for Avg_FMPdollar.i can't understand the difference to SQL calculation, since calculations are similar to the other ones. After that i've tried:
test:=SUM([_FMPdollar])/countrows('Fct Sales') AND the value was EQUAL to SQL: -672,17
test2:=AVERAGE('Fct Sales'[_Frontend Margin Percent ACY]), and here, without dividing by 100 in the end, -696,74...
So, AVERAGE and AVERAGEX have a diferent behaviour from the SUM divided by COUNTROWS, and even more strange, test2 doesn't need the division by 100 to be similar to AVERAGEX result.
I even calculated the number of blanks and number of zeros on each column, could it be a difference on the denominator (so, a division by a diferente number of rows), but they are equal on each row.
View 2 Replies
View Related
Feb 15, 2008
I have a temp_max column and a temp_min column with data for every day for 60 years. I want the average temp for jan of yr1 through yr60, averaged...
I.E. the avg temp for Jan of yr1 is 20 and the avg temp for Jan of yr2 is 30, then the overall average is 25.
The complexity lies within calculating a daily average by month, THEN a yearly average by month, in one statement.
?confused?
Here's the original query.
accept platformId CHAR format a6 prompt 'Enter Platform Id (capital letters in ''): '
SELECT name, country_cd from weather_station where platformId=&&platformId;
SELECT to_char(datetime,'MM') as MO, max(temp_max) as max_T, round(avg((temp_max+temp_min)/2),2) as avg_T, min(temp_min) as min_temTp, count(unique(to_char(datetime, 'yyyy'))) as TOTAL_YEARS
FROM daily
WHERE platformId=&&platformId and platformId = platformId and platformId = platformId and datetime=datetime and datetime=datetime
GROUP BY to_char(datetime,'MM')
ORDER BY to_char(datetime,'MM');
with a result of:
NAME_________________CO
-------------------- --
OFFUTT AFB___________US
MO______MAX_T _____AVG_T__MIN_TEMTP_TOTAL_YEARS
-- ---------- ---------- ---------- -----------
01_________21______-5.31________-30__________60
02_________26______-2.19______-28.3__________61
03_______31.1_______3.61______-26.1__________60
04_______35.6______11.07______-12.2__________60
05_______37.2_______17.2_______-3.3__________60
06_______41.1______22.44__________5__________60
07_______43.3______24.92________7.2__________60
08_______40.6______23.71________5.6__________60
09_________40______18.84_______-2.2__________59
10_______34.4_______12.5_______-8.9__________59
11_________29_______4.13______-23.9__________60
12_________21______-2.52______-28.3__________60
View 4 Replies
View Related
Sep 26, 2007
Hello,I have two tables:[Posts] > PostId, ...[Ratings] > RatingId, PostId, RatingI want to select all posts and add a new column named AverageRating.This new column is the average of all ratings associated to that Post.If a post was not rated then its AverageRating would be NULL.How can I do this?Thanks,Miguel
View 2 Replies
View Related
Apr 18, 2006
if I have a bunch of times, and want an average of them, how do I do that?
Thanks.
For more details, see this thread:
http://www.dbforums.com/showthread.php?t=1215633
View 8 Replies
View Related
Jun 19, 2007
I am getting the number of transactions for two different months based on dates entered from the user. I need to display the number of transactions along with the average sale. I have figured out how to get the dates and sum the transactions but I can't seem to add in the average....
(@prevMonthStart datetime, @prevMonthEnd datetime, @thisMonthStart datetime, @thisMonthEnd datetime)
as
select sum(case when orders.orderdate between @prevMonthStart and @prevMonthEnd then 1 else 0 end ) as PrevMonthCount,
sum(case when orders.orderdate between @thisMonthStart and @thisMonthEnd then 1 else 0 end ) as ThisMonthCount
(how do I add in the average for both months? The column is orders.ordertotal)
View 3 Replies
View Related
Jan 6, 2008
Using MS SQL 2005 server how can I get the average cost price of item 'shirt' from this table please?
code item description cost retail
---- ---- ----------- ---- ------
191 shirt shirt - white 2.30 9.99
170 pants pants - beige 6.34 15.00
196 shirt shirt - red 2.64 9.99
199 shirt shirt - blue 2.61 9.99
View 2 Replies
View Related
May 21, 2008
Hi All,
I was hoping someone could help me with pluging moving average into my report.
This is the template I am using for moving average:
//
/*Returns the average value of a member over a specified time interval.*/
CREATE MEMBER CURRENTCUBE.[MEASURES].[Moving Average]
AS Avg
(
[<<Target Dimension>>].[<<Target Hierarchy>>].CurrentMember.Lag(<<Periods to Lag>>) :
[<<Target Dimension>>].[<<Target Hierarchy>>].CurrentMember,
[Measures].[<<Target Measure>>]
)
// This calculation returns the average value of a member over the specified time interval.
FORMAT_STRING = "Standard";
This is what I have before I started to add the moving average. The report works but only displays the cummulative complexity rank.
WITH
MEMBER [Measures].[Date Key] AS
[Date].[Date].CurrentMember.UniqueName
SELECT
{
[Measures].[Date Key],
[Measures].[ComplexityRank]
} ON COLUMNS,
(
[Work Item].[System_State].[System_State],
(StrToMember(@StartDateParam):StrToMember(@EndDateParam))
)
ON ROWS
FROM [Team System]
WHERE
(
STRTOMEMBER("[Team Project].[Team Project].["+@Project+"]"),
STRTOSET(@IterationParam),
STRTOSET(@AreaParam),
STRTOSET(@WorkItemTypeParam)
)
What I want to do is also add the moving average for this over the parameter of Iterations. (IterationParam). This is what I have so far with the moving average in my report: I know I must have a lot of errors but I can't get past this first error. I highlighted the line with error. The error said: Query(7, 15) Parser: The syntax for '.' is incorrect. (msmgdsrv)
WITH
MEMBER
[Measures].[Date Key] AS
[Date].[Date].CurrentMember.UniqueName,
[Measures].[Moving Average] as
AVG({[Date].[Date].currentmember.lag(@IterationParam):
[Date].[Date].currentmember},[Measures].[ComplexityRank])
SELECT
{
{measures.[moving average],measures.[Internet Total Product Cost]} on 0,
[Date].[Date]. Members
[Measures].[Date Key],
[Measures].[ComplexityRank]
} ON COLUMNS,
(
[Work Item].[System_State].[System_State],
(StrToMember(@StartDateParam):StrToMember(@EndDateParam))
)
ON ROWS
FROM [Team System]
WHERE
(
STRTOMEMBER("[Team Project].[Team Project].["+@Project+"]"),
STRTOSET(@IterationParam),
STRTOSET(@AreaParam),
STRTOSET(@WorkItemTypeParam)
Does anyone have any suggestions?
Thanks,
Nici
View 11 Replies
View Related
Jan 5, 2007
I have two tables, table a holds all the votes by users of each element in table b. I was wondering, how do I get the average of all those votes in table a that relate to that each instance of a element in table b. For example table b has two elements created by a certain user that has been voted 5 times each by users with scores like 2, 5, 4, 2 , 2 for both of them. I just need to get the average of those numbers that pertain to those elements in table b. Thanks for any help.
View 4 Replies
View Related
Oct 25, 2000
Can any one be able to help me to write a querry on Moving Average
Example
Product Volume
Fish
View 2 Replies
View Related
Sep 21, 2007
Hello all!This might be a newbie question, and there might be something Im just not thinking of right now, but I have a set of values that I need to get the average of but only from the middle 90%. Example:11 <-From here1234456 <- To here.7I thought I could solve it by subqueries and do the following:Select (((Select sum top 5 order asc) + (Select sum top 5 order desc)) - sum total)/rows*0.9 which would give me what I want, but I realised that when aggregating I cant order the subqueries.This is for an application (that will run the query on a sql-server) that only takes one query (although subqueries should be fine), and thats why I have a problem, I cant build any views or things like that.I guess my question is very simple: How can I get a sum of the bottom 5 percent without sorting descending?
View 9 Replies
View Related
May 8, 2012
Select * from personnel
where salary > ALL (SELECT AVG (salary) from personnel group by bolno)
And how i find max average salary?
View 8 Replies
View Related
Apr 9, 2008
Hi, I have two tables, Weekly and AverageEngTime. Weekly table has 14 columns, "Mon_Day,Mon_Night,Tue_day,....Sun_Night". AverageEngTime table has 15 columns, "Shifts,Mon_Day,Mon_Night,Tue_day,....Sun_Night". I have inserted "Average" as a value for column "Shifts" in AverageEngTime table. Now how do I find the average for each column in Weekly table and insert into AverageEngTime table in the respective columns, and in the row where Shifts = "Average".
I used the following codes to try but i receive errors at where statement.Please correct me. The expected output as below.
Shifts | Mon_day | Mon_Night | Tue_Day.....
Average | 5.2 | 10.2 | 15.2........
The codes that i tried..
declare @Weekday tinyint, @hour int
select @Weekday = datepart(dw,getdate()),@hour= datepart(hh,getdate())
if (@Weekday= 1 and (@hour>= 7 AND @hour<19))
begin
Insert Into AverageEngTime(Sat_Night) where Shifts = 'Average'
SELECT AVG(Sat_Night)
FROM Weekly
end
if ((@Weekday= 1 and @hour >= 19) OR (@Weekday = 2 and @hour < 7))
begin
Insert Into AverageEngTime(Sun_Day) where Shifts = 'Average'
SELECT AVG(Sun_Day)
FROM Weekly
end
View 7 Replies
View Related
May 28, 2008
Problem
fldyear fldascending flddecending
2007 20 23
2006 21 14
2007 41 12
2007 12 5
how do i find the average of fld ascending and descending where year=2007
Your help will be appreciated
View 6 Replies
View Related
Jul 12, 2013
How do you get the average number in sql?
View 11 Replies
View Related
May 22, 2006
Can anyone tell me how to calculate a moving average for the below table?
--------------------
MONS /vol /counter(the date)
jan/8 / 2006-01-01
feb/9 / etc.
........
oct/5 / etc.
nov/6 /
dec/7 /
--------------------- I am using the below code, but it is having no effect......
SELECT i1.MONS, i1.COUNTER,
( SELECT AVG( i2.VOL )
FROM #RES1 AS i2
WHERE i2.MONS = i1.MONS And
DATEDIFF( month , i2.COUNTER , i1.COUNTER ) Between 0 And 12
) AS MovingAverageOver12Months
FROM #RES1 AS i1
ORDER BY i1.COUNTER
thanks in advance, dirwin
View 2 Replies
View Related
Feb 22, 2007
I made a code to in SQL reporting services for the reports of our company regarding the new applicants. Now I need to get the average datedifference in each phase from all applicants who entered Initial/Data Collection. Example, "Initial/Data collection"PHASE will have an average of 60 minutes to be finished, averaged from all 200 applicants, and "Screening"PHASE 240 minutes to be finished, averaged from 100 applicants.
All applicants must go through stage 1 before he can go to stage 2 and so on.
The date diff will be obtained from the "createdon" column subtracted to the last "modifiedon" column in each phase.
I need to insert that code to the existing code that I have if it is possible(which my boss prefer); or either if i can manipulate it in SQL reporting services in visual studio 2005.
Here is a sample output that I have.Each phase has a different color.
Here is the code that i used
SELECT subject, regardingobjectidname, createdon, modifiedon, stat, phase, initial,
(CASEphaseWHEN 'Initial/Data Collection' THEN 1
WHEN 'Screening' THEN 2
WHEN 'Assesment and Selection' THEN 3
WHEN 'Placement' THEN 4
END) AS Phasesort
FROM(
SELECT subject, regardingobjectidname, createdon, modifiedon, stat, initial,
(CASEstatWHEN 'Application Recieved' THEN 'Initial/Data Collection'
WHEN 'For Screening' THEN 'Screening'
WHEN 'Shortlisted' THEN 'Screening'
WHEN 'For Assesment' THEN 'Assesment and Selection'
WHEN 'For Assesment' THEN 'Assesment and Selection'
WHEN 'Passed Initial Interview' THEN 'Assesment and Selection'
WHEN 'Passed Profiles Assesment' THEN 'Assesment and Selection'
WHEN 'Passed Technical Exam' THEN 'Assesment and Selection'
WHEN 'For Placement' THEN 'Placement'
END) AS phase
FROM(
SELECT subject, regardingobjectidname, createdon, modifiedon, initial,
(CASEinitialWHEN '1 stage' THEN 'Application Recieved'
WHEN '2 stage' THEN 'Application Recieved'
WHEN '3 stage' THEN 'For Screening'
WHEN '4 stage' THEN 'Shortlisted'
WHEN '5 stage' THEN 'For Assesment'
WHEN '6 stage' THEN 'Passed Initial Interview'
WHEN '7 stage' THEN 'Passed Profiles Assesment'
WHEN '8 stage' THEN 'Passed Technical Exam'
WHEN '9 stage' THEN 'For Placement'
WHEN '10 stage' THEN 'For Placement'
END) AS stat
FROM(
SELECT subject, regardingobjectidname, createdon, modifiedon,
(CASEsubjectWHEN N'application received' THEN '1 stage'
WHEN 'process application' THEN '2 stage'
WHEN 'screen application' THEN '3 stage'
WHEN 'Phone interview' THEN '4 stage'
WHEN N'initial interview' THEN '5 stage'
WHEN 'profiles assessment' THEN '6 stage'
WHEN 'technical exam and interview' THEN '7 stage'
WHEN 'background and reference check' THEN '8 stage'
WHEN 'Job Offer' THEN '9 stage'
WHEN 'Contract Signing' THEN '10 stage'
END) AS initial
FROM(SELECT subject, regardingobjectidname, createdon, modifiedon
FROMFilteredTask
WHERE (subject IN ('application received', 'process application',
'screen application', 'initial interview', 'profiles assessment',
'technical exam and interview', 'background and reference check', 'job offer',
'contract signing'))
UNION ALL
SELECT subject, regardingobjectidname, createdon, modifiedon
FROMFilteredPhoneCall
WHEREsubject = 'phone interview'
) AS Orion
) AS Initials
) AS Phases
) AS Stats
ORDER BY regardingobjectidname, initial
I appreciate your help.
Thanks a lot.
__________________________________________________
Your future is made by the things you are presently doing.
Andrew
View 9 Replies
View Related
Mar 31, 2008
Here's my sample formula:
SELECT dbo.TechphonesCalibQA.ID, dbo.TechphonesCalibQA.EmpID, dbo.TechphonesCalibQA.EmpName, dbo.TechphonesCalibQA.[Level],
CASE dbo.TechphonesCalibQA.G_Branded WHEN dbo.TechphonesCalibClient.G_Branded THEN 1 ELSE 0 END AS G_Branded
FROM dbo.TechPhonesCalibClient INNER JOIN
dbo.TechphonesCalibQA ON dbo.TechPhonesCalibClient.SesID = dbo.TechphonesCalibQA.SesID
I would like to get the average of column G_branded (Result from the above formula) Any idea?
Thanks
View 3 Replies
View Related
Aug 17, 2006
Apologies for the simplicity of the question, but it reflects mycapabilities! I have the following sample fields coming from differenttables:LocationTimeDate (timestamp)DataI need to return the average of Data per Location per HOUR.Thanks.
View 7 Replies
View Related
Jul 20, 2005
Hi AllWe have an order processing database which includes the standard OrderHeader/Order Lines tables. I'm trying to write a query to get the averagenumber of lines per order over a given period, and I'm stuck :-(I can get the number of lines per order with:SELECT COUNT(*) FROM OrderDetailsINNER JOIN Order Header ONOrderHeader.OrderNo = OrderDetails.OrderNoWHERE OrderHeader.OrderDate ..... {various criteria} ...GROUP BY OrderDetails.OrderNumberBut how do I then get an average of this for the period?TIAMike Bannon
View 5 Replies
View Related
Dec 12, 2007
Hello Sql Expert!
I am trying to create a query that i can use to find the Average Check for transactions sold with a particular product.
The sql table i'm working with looks like this
ORDERID PRODUCT PRICE COUNT PAID
00001 burger 1.00 1 1.00
00001 hotdog 2.00 2 4.00
00001 drink 1.00 1 1.00
00001 shake 2.00 1 2.00
00002 burger 1.00 2 2.00
00002 shake 2.00 5 10.00
00003 hotdog 2.00 1 2.00
I would like to create something that will give me the average check for every product
ex
PRODUCT AVG CHECK
burger 10
shake 10
hotdog 5
drink 8
I created a query that could give me the % of each product that are ordered alone. I tried modifying it to give me avg check but ran into problems because the when i use max(product) to aggergate the field, it uses the products with the highest first character in the alphabet thus it products with V's and Y's get a lot more results (
Is there an easy way to do this by creating a temp table or nested query?
I can create a nested query to give me the average check for only one product at a time. I'm looking for something that can group the average check by all product.
Any help would be greatly appreciated!
Thank you so much!
View 1 Replies
View Related
Oct 9, 2007
time_stamp met_id ch1avg
12/7/2006 12:00:00 AM 0970 .5
12/7/2006 12:10:00 AM 0970 1.10
I have a table which collects data at 10 minute intervals, so per day, per met_id there are 144 records. Averaging ch1avg based on a single date query correctly produces 144 records. I am trying produce 144 record average based on any date spread in the where clasue. For example if the where is time_stamp between '01/01/2007' and '01/03/2007' this would be 288 records however the ouput needs to always be grouped into 144 records maximum. Looking for any assistance.
View 3 Replies
View Related
May 13, 2008
Hi All,
I am trying to create a report that shows moving average. Well I found this template:
//
/*Returns the average value of a member over a specified time interval.*/
CREATE MEMBER CURRENTCUBE.[MEASURES].[Moving Average]
AS Avg
(
[<<Target Dimension>>].[<<Target Hierarchy>>].CurrentMember.Lag(<<Periods to Lag>>) :
[<<Target Dimension>>].[<<Target Hierarchy>>].CurrentMember,
[Measures].[<<Target Measure>>]
)
// This calculation returns the average value of a member over the specified time interval.
,
FORMAT_STRING = "Standard";
Only I do not have a specified interal or a constant number that I can place into
.Lag(<<Periods to Lag>>)
The report I have has a parameter that allows you to select a specific team project from a list. Although I have not figured out how to get the iteration paramter to update to only show the specified team project iterations, I want the graph to only show the iterations for that team project and the moving average (in the graph). The problem is that I can't just plug in the number 6 because different projects we have, have different numbers of iterations, and the user can pick any project from the list in the parameter.
Does anyone have suggestions on this?
Thanks!
-Nici
View 2 Replies
View Related
Feb 8, 2007
I am using an expression to create an average. The result is an odd number like 33.666666666666667.
I want to round this to 34 (I would even accept 33, or 33.67), just not so manny digits to the right.
View 1 Replies
View Related
Oct 12, 2007
Just want to gathr some ideas.I have a matrix where i retrieve Fields!Amount.I used the subtotal property to get the total amount per quarter.But how can i get the average of the 3 months.I tried using the Avg(Fields!Amount.Value) but it's results is unexpected or wrong.
________________________
| Avg(Fields!Amount.value) |
| Jan | Feb | March |
-------------------------------------------
| 0.1 | 0.2 | 0.2 |
| 0.3 | 0.1 | 0.5 |
SubTotal | 0.4 | 0.3 | 0.7 |
That is the design of my matrix.And other thing,it is dynamic,for example,There is a possibility that Feb could be absent.SO i cannot make Sum(Fields!Amount.Value) / 3. Dont know what to do for that.Why could Avg be wrong, correct me if im wrong,but as for what i know,i think the formula for Avg in my matrix is :
Avg = Sum of 3 totals / no. of months..
Hope to hear from anyone out there..Thanks!!
View 8 Replies
View Related
Jan 7, 2008
hi guys
I have a list of data, but I want to calculate the average.
for example
dh from depth bi
a 0 1 4.5
a 1 2 3.2
a 2 5 8.2
a 5 7 10.5
a 7 10 5
a 10 15 7.8
a 15 20 9.5
a 20 22 10.2
b 0 5 2.3
b 5 7 3.1
b 7 9 4.6
b 9 12.5 12
b 12.5 15 5.5
b 15 17 8.9
b 17 19 10
this means that for each interval I have a value in the field bi and I want to calculate an average for the total for each dh something like this for a group of values
dh bi
a ( (depth-from)* bi)/sum(depth-from)
b ((depth-from)* bi)/sum(depth-from)
thanks for your help
View 1 Replies
View Related
Feb 1, 2008
Hi,
Here is a part of result set.
It is of every minute value.
How can I get every other 5-minute average value?
id datetime value
------------------- ----------------------------- --------
0xC00302FD 2008-01-31 18:36:00 0.104
0xC00302FD 2008-01-31 18:37:00 0.104
0xC00302FD 2008-01-31 18:38:00 0.104
0xC00302FD 2008-01-31 18:39:00 0.104
0xC00302FD 2008-01-31 18:40:00 0.104
0xC00302FD 2008-01-31 18:41:00 0.104
0xC00302FD 2008-01-31 18:42:00 0.104
...
...
...
View 1 Replies
View Related
May 15, 2008
I don't even know if this is possible but here is a picture of some sample results.
Description Amount Account Location Begin Balance
Test 1234 $100 0001 Las Vegas $5000
Test 2345 $50 0001 Las Vegas $5000
Test 3456 $80 0001 Phoenix $2000
What this is, is transactions and their amounts and account/location they went to. The last column is the beginning balance for the account/location combination. I only need the beginning balance once per account/location or averaged. So I need either this (beginning balance only shows once).....
Description Amount Account Location Begin Balance
Test 1234 $100 0001 Las Vegas $5000
Test 2345 $50 0001 Las Vegas $0
Test 3456 $80 0001 Phoenix $2000
or I need this (beginning balance is averaged)......
Description Amount Account Location Begin Balance
Test 1234 $100 0001 Las Vegas $2500
Test 2345 $50 0001 Las Vegas $2500
Test 3456 $80 0001 Phoenix $2000
That way I can do a sum on the beginning balance results in my report for the account/location combination, and do a sum on just account or just location while still having my transactions.
Is this possible?
Thanks,
Adam
View 5 Replies
View Related
Nov 4, 2005
Does anyone know if it's possible to calculate weighted averages on report level, based on 2 items in the report?
View 6 Replies
View Related
May 13, 2008
I have a table that always contains 13 records. It contains a column called 'RecordKey' and a colum called 'ResTime'
I need to get the average of the 12 Restimes with the highest record Key (ie. Average of all in the table except the bottom RecordKey), then round that result to 2 decimal places.
Ive been trying variations of this statment:
set @AverageResult =
round((SELECT AVG(Select Top(RecordKey, 12) from Reports_PI)ResTime) FROM Reports_PI),2)
I cant seem to get it to work. Any ideas what im doing wrong?
View 2 Replies
View Related
Feb 20, 2001
How do I find the average size of a row in a table? I need to calculate a row size in a number of tables, then sum those to find the average size of one record ( a hotel guest in this case), which includes entries in a dozen tables.
Thanks
View 1 Replies
View Related
May 5, 2006
Hi,
I have the following table:
OrderNumber varchar(15)
Completed int(1)
Certificate int(1)
ThroughputTime int(4)
With the following data:
OrderNumber Completed Certificate ThroughputTime
00001 1 1 1
00002 1 1 2
00003 1 0 1
00004 1 0 1
00005 0 1 2
00006 0 1 1
00007 0 0 4
00008 0 0 89
I have a dimension:
All Completed
- Completed
- Not Completed
and a dimension:
All Certificate
- No Certificate
- Certificate
I also have a measures:
TptSum which Sums ThroughputTime
TptCount which Counts OrderNumbers
TptAvg which divided TptSum by TptCount
My problem is with the next measure:
In MSAS I created a Cube which shows the measures on the columns and both Completed and Certificate on the rows. The OrderNumber selection is set to "All Ordernumbers". The measures a listed above are displayed exactly as i expect them to do. TptSum gives the sum for the subselection showed on the left. TptCount and TptAvg also show the expected values on their distinct rows.
I can't upload a screenshot but it looks like this:
TptSum TptCount TptAvg
All Certificate All Completed 101 8 12.63
Completed 5 4 1.25
Not Completed 96 4 24.00
No Certificate All Completed 95 4 23.75
Completed 2 2 1.00
Not Completed 93 2 46.50
Certificate All Completed 6 4 1.50
Completed 3 2 1.50
Not Completed 3 2 1.50
So far so good. Each datarow only takes the records that match the criteria at the left.
Now however, To exclude exceptions that have a huge impact on the average I want to create a trimmed average. That is, I want to exclude the top 25% values in my trimmed average measure, which are the 2 records with the highest ThroughputTime, being ordernumber 00007 and 00008 in the "All Certificate" & "All Completed" row, but different in the other rows. I also want the bottom 25% values to be trimmed, which are the 2 records with the lowest ThroughputTime, being ordernumber 00001 and 0003 in the "All Certificate" & "All Completed" row.
I tried a lot of things, but i can't get it working. Somehow all my statements don't take the subselections on the rows into account. Really frustrating.
What I want to achieve is the following:
TptSum TptCount TptAvg TrimmedAvg
All Certificate All Completed 101 8 12.63 1.50 ((2+1+2+1) / 4) (middle 4 records)
Completed 5 4 1.25 1.00 ((1+1) / 2) (middle 2 records)
Not Completed 96 4 24.00 3.00 ((2+4) / 2) (middle 2 records)
No Certificate All Completed 95 4 23.75 2.50 ((1+4) / 2) (middle 2 records)
Completed 2 2 1.00 1.00 ((1+1) / 2) (all 2 records)
Not Completed 93 2 46.50 46.50 ((4+89) / 2) (all 2 records)
Certificate All Completed 6 4 1.50 1.50 ((1+2) / 2) (middle 2 records)
Completed 3 2 1.50 1.50 ((1+2) / 2) (all 2 records)
Not Completed 3 2 1.50 1.50 ((1+2) / 2) (all 2 records)
I hope I describe my problem well... I also hope someone knows a solution. I can also post the things I tried, but I'm afraid that makes it more confusing, because nothing worked ;)
Thanks,
Edward
View 1 Replies
View Related
Aug 21, 2002
I want to find out the average rwo size of a table in sql server 2000. How can i achive this requirment? Please let me know how can i do this?
Thanks & regards,
Dishant Sharma
View 1 Replies
View Related
