How To Get Identity Field Value After Recordset Update

May 19, 2004

I want to add a record and then get the automatically generated identifier(ReqChildID in this case). Is there a better way? Why won't this one work.

This is what I have:

rsRec.AddNew
rsRec("RequisitionID") = intReqNum
rsRec("CreatedBy") = cint(session("empno"))
rsRec("DateCreated") = Now
rsRec.Update
intItemId = rsRec("ReqChildID")
rsRec.Close


Forgive me if this has already been posted, but I couldn't find it.

[edit to add:]

rsRec is an ADODB.Recordset in case that wasn't clear.

View 10 Replies


ADVERTISEMENT

Last GASP On Insert Row In Table With Identity Field, And Get New Identity Back ?

Jul 9, 2006

While I have learned a lot from this thread I am still basically confused about the issues involved.

.I wanted to INSERT a record in a parent table, get the Identity back and use it in a child table. Seems simple.

To my knowledge, mine would be the only process running that would update these tables. I was told that there is no guarantee, because the OLEDB provider could write the second destination row before the first, that the proper parent-child relationship would be generated as expected. It was recommended that I create my own variable in memory to hold the Identity value and use that in my SSIS package.

1. A simple example SSIS .dts example illustrating the approach of using a variable for identity would be helpful.

2. Suppose I actually had two processes updating these tables, running at the same time. Then it seems the "variable" method will also have its problems. Is there a final solution other than locking the tables involved prior to updating them or doing something crazy like using a GUID for the primary key!

3. We have done the type of parent-child inserts I originally described from t-sql for years without any apparent problems. (Maybe we were just lucky.) Is the entire issue simply a t-sql one or does SSIS add a layer of complexity beyond t-sql that needs to be addressed?



TIA,



Barkingdog

View 10 Replies View Related

Insert Row In Table With Identity Field, And Get New Identity Back

Jun 30, 2006

I want to insert a new record into a table with an Identity field and return the new Identify field value back to the data stream (for later insertion as a foreign key in another table).

What is the most direct way to do this in SSIS?



TIA,



barkingdog



P.S. Or should I pass the identity value back in a variable and not make it part of the data stream?

View 12 Replies View Related

Recordset Field Limit???

Dec 5, 2005

Hey Everyone, I have what seems to be a unique problem, which I am not sure if it is an ASP problem or an SQL Server issue. I'm making a website that pulls its content from ntext fields within SQL Server 2000. Heres my problem, when I pull the data into the page it cuts off the text from the field at a certain spot. I pulled the data into a variable and did some tests on it, if I run length on it I get 1023 and also if I run length on just the recordset field I also get 1023. But if I check the SIZE of the recordset I get a return of 2046. I have had this problem before with an Access database as well but it seems as if the amount of characters that it cut off at with the access database was in the 200's. I've self taught myself ASP so this could very easily be something I have missed. Same for both Access and SQL Server.

View 4 Replies View Related

Retrieve A Recordset From One Table Based On The CSV Values In The Field Of Another

Feb 6, 2007

Hello!

I have 2 tables, one that contains a set of codes and their definitions, and another where each record has a field that contains several of these codes separated by commas:

Tab1

SubCode | Definition
---------------
S100 | Def of S100
S101 | Def of S101
S102 | Def of S102

Tab2

DepID | Purpcode |SubCodes
-----------------------------
1 | P100 | S100,S101,S102
1 | P101 | S100, S101
2 | P101 | S100,S102

I'm trying to create a query against Tab1 so that it retrieves a recordset of Subcodes and definitions based on the contents of the Subcodes field for a record in Tab2. I've tried this using a subquery, as follows:

SELECT SubCode ,Definition
FROM Tab1
WHERE SubjectCode IN
(SELECT CHAR(39) + REPLACE(SubjectCodes, CHAR(44), CHAR(39 + CHAR(44)+ CHAR(39)) + CHAR(39)
FROM Tab2
WHERE DepID = 1 AND PurposeCode = 'P101')

The subquery will return: 'S100','S101' and I expect the final recordset to be:

SubCode | Definition
---------------
S100 | Def of S100
S101 | Def of S101

However, it's not returning any records. If I execute the subquery separately and then plug its results into the main query e.g.

SELECT SubCode ,Definition
FROM Tab1
WHERE SubjectCode IN ('S100','S101')

it returns the expected recordset. Does anyone have any pointers? It's driving me nuts..

Cheers
Greg

Complete DDL, Sample Data, and Query below:


if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[SubjectCodeDefinition]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[SubjectCodeDefinition]
GO

if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[DepartmentReturn]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[DepartmentReturn]
GO

CREATE TABLE [dbo].[SubjectCodeDefinition] (
[SubjectCode] [varchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Definition] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL
) ON [PRIMARY]
GO

CREATE TABLE [dbo].[DepartmentReturn] (
[DeptID] [int] NULL ,
[PurposeCode] [varchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[SubjectCodes] [varchar] (250) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
) ON [PRIMARY]
GO

INSERT INTO SubjectCodeDefinition(SubjectCode, Definition)
SELECT 'S100', 'Definition of Code S100' UNION ALL
SELECT 'S101', 'Definition of Code S101' UNION ALL
SELECT 'S102', 'Definition of Code S102' UNION ALL
SELECT 'S103', 'Definition of Code S103' UNION ALL
SELECT 'S104', 'Definition of Code S104' UNION ALL
SELECT 'S105', 'Definition of Code S105'
GO

INSERT INTO DepartmentReturn(DeptID,PurposeCode,SubjectCodes)
SELECT 1,'P100','S100,S101,S104' UNION ALL
SELECT 1,'P101','S102,S103' UNION ALL
SELECT 1,'P102','S100,S101,S105' UNION ALL
SELECT 2,'P100','S100,S101,S104,S105' UNION ALL
SELECT 2,'P103','S103,S104,S105' UNION ALL
SELECT 3,'P100','S100,S102,S104'
GO

SELECT SubjectCode ,Definition
FROM SubjectCodeDefinition
WHERE SubjectCode IN
(SELECT CHAR(39) + REPLACE(SubjectCodes, CHAR(44), CHAR(39)+ CHAR(44)+ CHAR(39)) + CHAR(39)
FROM DepartmentReturn
WHERE DeptID = 1 AND PurposeCode = 'P102')

View 1 Replies View Related

Returning Recordset That Includes A DateDiff Field In Hh:mm:ss Format?

Jul 20, 2005

Hi, not too swift with anything other than simple SQL statements, soI'm looking for some help.Using SQL Server 2000 with this stored proc:(@varCust varchar(50))ASSET NOCOUNT ONSELECT d.WorkOrder, d.Customer, d.SerialNo, d.Assy, d.Station,d.WIdoc,d.Start, d.StartUser, d.Finish, d.FinishUserFROM tblWorkOrder w, tblDocs dWHERE w.WorkOrder IS NULL AND w.WorkOrder = d.WorkOrder ANDd.Customer = @varCustGOI'm trying to get a complete dataset so I can simply apply it as thedatasource to a datagrid in asp.net. I need to include a 'TimeSpan'column that is the difference between d.Start and d.Finish. I alsoneed it to present in hh:mm:ss format in the datagrid column. (A) isit possible to do this within the stored proc, and (B) how would "I"do that?Thanks!Kathy

View 6 Replies View Related

T-SQL (SS2K8) :: How To Update Identity Column With Identity Value

Jan 25, 2015

I have table of three column first column is an ID column. However at creation of the table i have not set this column to auto increment. Then i have copied 50 rows in another table to this table then set the ID column values to zero.

Now I have changed the ID column to auto increment seed=1 increment=1 but the problem is i couldn't figure out how to update this ID column with zero value set to each row with this auto increment values so the ID column would have values from 1-50. Is there a away to do this?

View 6 Replies View Related

Error Message With Recordset.Update

Feb 9, 2007

Hi,

I am converting a VB6 application to C# using ADO. I have the following code:

private ADODB.Connection cn = new ADODB.Connection();
private ADODB.Recordset rs = new ADODB.Recordset();

private connectionString = "Provider=Microsoft.Jet.OLEDB.4.0; Data source= " + stdDir;
strClientSQL = "SELECT * FROM Client ORDER BY casename, renldate, product, fundingcode";

cn.CursorLocation = ADODB.CursorLocationEnum.adUseClient;
cn.Open(Utilities.connectionString,null,null,0);

rs.CursorLocation = ADODB.CursorLocationEnum.adUseServer;
rs.Open(strClientSQL,cn, ADODB.CursorTypeEnum.adOpenStatic, ADODB.LockTypeEnum.adLockOptimistic,-1);
rs.Fields["CaseName"].Value = this.txtCaseName.Text;

rs.Fields["CaseNo"].Value = this.txtCaseNumber.Text;

rs.Update();

When I try to compile and run it I get the following error message:
"No overload for method 'Update' takes '0' arguments"



I am not sure if I need to enter information in the update command or do something else. This seems pretty straight forward but I can't figure out how to do it. Can someone please help me?



Thanks,



Mark

View 4 Replies View Related

Converting An Integer Field Into An Identity Field

Sep 14, 2006

I have a table with an integer field (contains test values like 2, 7,8,9,12,..) that I want to convert to an Identity field. How can this be done in t-sql?

TIA,



Barkingdog





View 1 Replies View Related

Recordset.update With SQL Native Client Doesn't Work

Dec 4, 2006

We recently migrated from SQL Server 7 to SQL Server 2005. Now there's a curious thing with some legacy applications. I have pasted some code below. Don't judge me, because like I said, it's legacy.

You can see, that I have two connection strings. One is commented and accessing via SQL Native Client. The other one is doing this through the old SQL Server driver. Funnily enough, when I use the new Native Client driver, the exception "Run-time error '-2147467259 (80004005)' [Microsoft][SQL Native Client]Invalid attribute value" is thrown in the rsPorder2.Update line. With the old driver, this works just alright.

Is this a bug? Is there a way, to make the code run, because we don't want to search the whole application for other occurances, if not necessary.

Any insights would be greatly appreciated.

Best regards,
DD

Dim ilinx As New ADODB.Connection
Dim rsPorder As New ADODB.Recordset
Dim rsPorder2 As New ADODB.Recordset
Dim cmdLinx As New ADODB.Command
Dim strConn As String

Dim lvIli_number As String

'strConn = "DRIVER=SQL Native Client;Server=10.0.14.7;Description=Test2k;UID=sa;PWD=asdf;APP=Microsoft® Access;WSID=DEHHC023;DATABASE=Linx;Network=DBMSSOCN;"

strConn = "DRIVER=SQL Server;Server=10.0.14.7;Description=Test2k;UID=sa;PWD=asdf;APP=Microsoft® Access;WSID=DEHHC023;DATABASE=Linx;Network=DBMSSOCN;"
ilinx.Open strConn
Set cmdLinx.ActiveConnection = ilinx

lvIli_number = "12345"
cmdLinx.CommandText = "SELECT * FROM porder WHERE previous_ili_no = '" & lvIli_number & "' "
cmdLinx.CommandType = 1

rsPorder.Open cmdLinx, , 1, 1

If rsPorder.EOF Then

cmdLinx.CommandText = "SELECT * FROM porder WHERE ili_no = '" & lvIli_number & "' "
cmdLinx.CommandType = 1
rsPorder2.Open cmdLinx, , 1, 3

If rsPorder2.RecordCount > 0 Then

rsPorder2("Locked") = 0
rsPorder2.Update
End If

End If
rsPorder.Close

View 7 Replies View Related

VB6 Recordset Update Method Fails On SQL 2005 Server

Jan 13, 2008

Hi to all....

I'm new on this forum, but, I'm a experienced programmer.
I wanna solve this problem (if you can helpme....), recently, I'm trying to migrate an old SQL 7 to the new SQL 2005 server enterprise edition, I have no problem to import the data, users, stored procedures, etc. and all work fine, I can connect troght ODBC from the others computers, including some older pentium 1 mmx 200 mhz. with WIN98 (yes!).

My problem is an legacy VB6 application that work (well fine) with SQL7 server, but, when i change the odbc of the desktops systems to the new 2005 SQL server and run this legacy application hi recibe this error:
(english translation from spanish language)

[ODBC SQL Server Driver][SQL Server] The table to be modified is not included on this cursor or these can't be modified throught this cursor.

I have look on the source code of the legacy application, and someone of the segment's that causes error is:

------------------------------------------------------------------------


Public Function ConsultaCamara(sRutOP As String, _
sRut1 As String, _
strConsulta As String, _
Tipo As String, _
chk As CheckBox, _
Timer1 As Timer, _
LbAviso As Label) As Long
'----------------------------
Dim rsCACH, rsCACH_upd0, rsCACH_upd1, rsCACH_upd2 As ADODB.Recordset
Dim CmCACH As ADODB.Command
Dim lPendiente As Boolean
Dim lActivo As Boolean
Dim strSQL1, strSQL_upd0, strSQL_upd1, strSQL_upd2 As String
Dim StrWHE As String
Dim DameTiempo As Integer
Dim snombre As String
Dim sMsgEstado As String
Dim sAviso_Inicial As String
Dim cNum As String
Dim cDig As String
...
...
...
'Defino el string de consulta
strSQL1 = " SELECT RUTOPERADOR, " & _
" IDCAMARA, " & _
" RUTCONSULTADO, " & _
" ESTADO, " & _
" CANCON, " & _
" CADENACONSULTA, " & _
" FINGRESO, " & _
" FULCONSINT, " & _
" ULTRUTOP " & _
" FROM BOLETIN " & _
" WHERE RUTCONSULTADO = '" & sRut1 & "'" & _
" AND (ESTADO = 'PE' OR ESTADO = 'AC' )"

Set rsCACH = CreateObject("ADODB.Recordset")
rsCACH.ActiveConnection = cn
rsCACH.CursorType = adOpenKeyset
rsCACH.LockType = adLockOptimistic
rsCACH.Open strSQL1
If rsCACH.EOF Then 'No hay registro antiguo o en consulta, creo uno para consultar
sMsgEstado = "NO Existen datos ES REGISTRO NUEVO" & vbCr
rsCACH.AddNew
ConsultaCamara = GeneraID()
rsCACH.Fields("IDCAMARA") = ConsultaCamara
rsCACH.Fields("RUTOPERADOR") = sRutOP
rsCACH.Fields("RUTCONSULTADO") = sRut1
rsCACH.Fields("ESTADO") = "PE"
rsCACH.Fields("CANCON") = 1
rsCACH.Fields("CADENACONSULTA") = strConsulta
rsCACH.Fields("FINGRESO") = GetDateTime() 'Format(Date, "Short Date")
rsCACH.Fields("FULCONSINT") = GetDateTime() 'Format(Date, "Short Date")
rsCACH.Fields("ULTRUTOP") = sRutOP
rsCACH.Update <----- here's launches the error
...
...
...

--------------------------------------------------------

As you see, I'm not english spokeman, I hope that you understand me.

Thanks and best regards.

View 3 Replies View Related

DB_E_ROWSNOTRELEASED ADO2.81 Recodset-&&>Seek() After Recordset&&>Update()

May 11, 2006

I am getting error 0x80040E25 when I try to call seek after update on a Recordset opened as (adOpenStatic, adLockOptimistic, adCmdTableDirect)

9 - (13.250) - <2> - *** error in .DbRecordset.cpp, line 908
10 - (13.250) - <2> - ADO_ERRORS FOR pRs = 200a420, seek, err=-2147217883(80040e25)
11 - (13.250) - <2> - ADO_ERROR: E R R O R 1 of 1.
12 - (13.250) - <2> - ADO_ERROR: DESCRIPTION: All HROWs must be released before new ones can be obtained. [,,,,,].
13 - (13.250) - <2> - ADO_ERROR: NUMBER: 80040E25
14 - (13.250) - <2> - ADO_ERROR: NATIVE_ERROR: 0
15 - (13.250) - <2> - ADO_ERROR: SOURCE: Microsoft SQL Server 2005 Mobile Edition OLE DB Provider


I registered SQL Mobile 3.0 dlls using regsvr32.exe so now I can connect to SQLCE3.0 databases on desktop using plain ADO with such connection string _T("Provider=Microsoft.SQLSERVER.MOBILE.OLEDB.3.0; Data Source=") + name of the file

I have not asked this question before as it did not make sense -> there was no official SQLCE3.0 support on desktop. Now, since SQL CE is promiced to be supported on desktop as SQL/E I decided to ask.

View 1 Replies View Related

How Can I Get Vb6 To Update Offline Recordset When View Has Defined An Attribute As AdFldUnknownUpdatable?

Aug 21, 2006

hopefully, someone has already solved this problem

I have been assigned an application that maps data from access databases into a view in Sql Server 2005. A vb6 application does a select on the view. The recordset is then modified by the application, and eventually, the original tables will be updated with the new data. Some of the fields in the view are the result of calculations ( i.e. adding multiple varchar fields together to produce one complex varchar result ). Any of the fields that are calculated in the manner previously described have the adFldUnknownUpdatable bit set in the attributes of the recordset, and consequently, you get a -2147217887 error ( multiple-step operation .... ) when you try to change the value of the field in the recordset. Does anyone know how to get around this problem?

View 1 Replies View Related

Change Field To Identity Field

Aug 20, 2007

I have a table named PERSON and a field named PERSON_ID. How can I set this field to Autonumber? I know I have to use the IDENTITY command, but when I view this field in "design" view, all the IDENTITY options are grayed out.

How can I set this field with the IDENTITY properties?

Thanks

View 8 Replies View Related

Update Field With Trigger Only If A Specific Field Is Updated

Nov 11, 2013

I want to update a field with a trigger only if a specific field is updated.

When I try the code below, it updates the field when any field in the record is updated. Is there a way to only make look at picked_dt?

ALTER TRIGGER [dbo].[UpdatePickedDate]
on [dbo].[oeordlin_sql]
after update
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from

[Code] .....

View 4 Replies View Related

&<&<identity Field&>&>

Jul 2, 2006

hi friends,i have an identity column in my table.(e.x : id )and it's identity increment is 1.when i insert a row the id field is 1, and in next record the field is 2.....now , i delete second record(id=2)and now when i insert a record again , the id column is 3.i want to record be 2 instead 3.plz help me.thanks

View 2 Replies View Related

Re-set Identity Field

Nov 7, 2007

Hi:
I created a small SQL Express database/ASP.net/C# application and in the learning process.   Before I implement it I would like to re-set autonumber / identity field back to 1.  Also, I need to start with the blank database.  I am not sure how to approach that?
Can you assist?
Thanks 
 
 

View 1 Replies View Related

Sql Identity Field

Mar 10, 2008

Hello friends,
I had created a web application and uploaded the application. Now the problem is with the DB. I had created the DB on  the server (using script). But the fields that have identity field yes is not been set  Now how I can set the fields identity field to yes. Fields are already there. Only I want to set there identity field to yes.Let me know how this can be done.
Thanks & RegardsGirish Nehte

View 2 Replies View Related

Identity Field

Nov 5, 2005

Please, How can I get the value of the identity field of the register that I was including in the data base. I am using a stored procedure in SQLSERVER in a asp .net application and I need to show that for the user, it´s like the number of the reclamation.

View 2 Replies View Related

Bcp With IDENTITY Field

Apr 2, 2001

If my table has an IDENTITY field, say, the table schema is:
CREATE TABLE BBB(
id int NOT NULL IDENTITY(1,1),
name varchar(20),
job varchar(40))
My data file, which does not carry the IDENTITY field
and its field terminator. The data file looks like this:

debbie cao,programmer
John Doe,engineer
Mary Smith,consultant

I tried to use a format file to bulk copy data from the
data file to the table. Never had any luck.
On the other hand, if I put a comma before the name field,
say, the data file looks like the following:

,debbie cao,programmer
,John Doe,engineer
,Mary Smith,consultant

then, bcp works fine.
But, my data file is automatically generated. It does not
suppose to have the leading comma. Without the leading comma,
I have no idea how may I make bcp work. The SQLBOL says it
can be done. Does anybody have an example to show me?
Please help, thanks!

View 2 Replies View Related

Identity Field

Jul 12, 1999

Dear Fellow Administrators,

We are experiencing an identity problem on a table with 3.7 millions rows of data in the table. The identity field is not auto numbering any more and are wondering if anyone has a suggestion on how to get the auto number field working again without doing a bcp and restoring the table back to the database from bcp. Any suggestions?

Thanks in Advance,
Daimon

View 1 Replies View Related

Identity Field

Jul 9, 1998

Greetings !

Having an unusual problem - have created several (20) tables in a database.
All of these tables have an identity field in them (defined as FIELDNAME int IDENTITY(1,1) NOT NULL ). In most of the tables this works as expected, but in 2, so far, when I do the first load (an insert based on a different database) the identity fields are all zero.
Have recreated the tables, changed the field name and location, etc.
Anyone have any clues ?

TIA

Eric

View 3 Replies View Related

Identity Field

Apr 19, 1999

I need to update an identity field that I have on a table. How can
I go about doing this?

Thanks!
Toni

View 1 Replies View Related

Identity Field

Mar 8, 2004

Folks

I am inserting some values into a table with the following stmt

Insert into table(number,name) values ('12','name')

In the table I have one more identity column ID. I know that I cannot insert a value in that column and the value is automatically increased once I insert a record. After this insert statment, I need to get the value
of the ID (the most recent one) in the next select statement.

ie Select @@identity from table (any condition????)

How do I get the most recent ID value? Actually I m inserting the records in a loop and the ID is increased for every insert.


Thanks for the help,

View 3 Replies View Related

Identity Field

Jun 29, 2007

Hello...

New to SQL and have the following situation....

Example of table (currently)
PayID (Primary Key) PaymentNumber (Identity Field)
John 1
Tim 2
Chris 3
John (same as John above) 4
Jack 5
Steve 6

Would like to see it work this way
PayID (Primary Key) PaymentNumber (Identity Field)
John 1
John (same as John above) 2
Tim 1
Chris 1
Jack 1
Steve 1

Can the identity column be setup to start the counter over depending on value of PayeeID...If another Jack was added then the Payment Number would be 2 for Jack since there is already a record with value 1....

Hope this makes sense...

Thanks

View 2 Replies View Related

Identity Field Fix

Mar 14, 2007

I inherited a system with a SQL 2000 DB. We discovered an identity field named barcode with some values that are incorrect. About 1000 of the records contain a barcode field with 13 digits, not forteen as required. This field is a standalone field only used on an ID card. I would like to select those 1000 records and update the barcode field to 14 digits. Is there an easy way to do this? Thx

View 6 Replies View Related

SQL Server 2008 :: Update Null Enabled Field Without Interfering With Rest Of INSERT / UPDATE

Apr 16, 2015

If I have a table with 1 or more Nullable fields and I want to make sure that when an INSERT or UPDATE occurs and one or more of these fields are left to NULL either explicitly or implicitly is there I can set these to non-null values without interfering with the INSERT or UPDATE in as far as the other fields in the table?

EXAMPLE:

CREATE TABLE dbo.MYTABLE(
ID NUMERIC(18,0) IDENTITY(1,1) NOT NULL,
FirstName VARCHAR(50) NULL,
LastName VARCHAR(50) NULL,

[Code] ....

If an INSERT looks like any of the following what can I do to change the NULL being assigned to DateAdded to a real date, preferable the value of GetDate() at the time of the insert? I've heard of INSTEAD of Triggers but I'm not trying tto over rise the entire INSERT or update just the on (maybe 2) fields that are being left as null or explicitly set to null. The same would apply for any UPDATE where DateModified is not specified or explicitly set to NULL. I would want to change it so that DateModified is not null on any UPDATE.

INSERT INTO dbo.MYTABLE( FirstName, LastName, DateAdded)
VALUES('John','Smith',NULL)

INSERT INTO dbo.MYTABLE( FirstName, LastName)
VALUES('John','Smith')

INSERT INTO dbo.MYTABLE( FirstName, LastName, DateAdded)
SELECT FirstName, LastName, NULL
FROM MYOTHERTABLE

View 9 Replies View Related

Returning Identity Field

Jun 12, 2006

Hi all i'm trying to get the identity field after inserting into db, what am i doing wrong? thanks a lot
my sproc:
CREATE PROCEDURE ng_AddCotacao(...@Codigo_cotacao   int OUTPUT)ASBEGINSET NOCOUNT ONINSERT INTONegocios_cotacoes(...)VALUES(...)SELECT @Codigo_cotacao=SCOPE_IDENTITY()SET NOCOUNT OFFENDGO
 
class file
public class Cotacoes
{
public int codigoCotacao;
}
public class CotacaoAtualiza {  public Cotacoes cotacoes = new Cotacoes();
  public CotacaoAtualiza()  {  }
  public void AdicionarCotacao(   ...   )  {   SqlConnection myConnection = new SqlConnection(ConfigurationSettings.AppSettings["stringConexao"]);   SqlCommand myCommand = new SqlCommand("ng_AddCotacao", myConnection);
   myCommand.CommandType = CommandType.StoredProcedure;
   ...
   SqlParameter paramCodigo_cotacao = new SqlParameter("@Codigo_cotacao", SqlDbType.Int, 4);   paramCodigo_cotacao.Direction = ParameterDirection.Output;   myCommand.Parameters.Add(paramCodigo_cotacao);
   ...
   myConnection.Open();   SqlDataReader result = myCommand.ExecuteReader();
   while(result.Read())    {    this.cotacoes.codigoCotacao = (int) result["@Codigo_cotacao"];   }
   myConnection.Close();  }
 
calling into code-behind file:
CotacaoAtualiza ca = new CotacaoAtualiza();
Cotacoes cotacoes = ca.cotacoes;
Response.Redirect("Cotacao_confirma.aspx?cotacao=" + cotacoes.codigoCotacao);

View 1 Replies View Related

Replication With Identity Field

Apr 17, 2000

1. Can someone tell me how to replicate the identity field.
2. When I use the 'NOT FOR REPLICATION' option, I keeps getting synx error. Here is the command:
alter table tusers alter column {userid INT} IDENTITY (1, 1) [NOT FOR REPLICATION]. Do you know why?
3. When I use the transaction replication wizard, why some of the table do not allow me to replicate(There is a key and cross symbol on the articles selection)?

Thanks

View 3 Replies View Related

Identity Column Is The Only Col In The Field

Dec 6, 2001

I have a table which has a single column ,which is an IDENTITY colum.How do you insert values in it by using an insert statement.Thanks in advance

View 2 Replies View Related

How To Rearrange The Identity Field

Jan 12, 1999

Dear All,

Please help me! I have a table will a identity field the value are,
for example, 1, 2, 4, 6, 8, 10, 11 .... etc.

I want to make it in a sequence, that is, 1,2,3,4,5,6,7...

How can I do it, Please help me, thank you for you helping.

Best Regards,
J.H.

View 3 Replies View Related

Identity Field And IDENTITY_INSERT Is Off

Nov 14, 2005

ok, so i get this error,
Exception Details: System.Data.SqlClient.SqlException: Cannot insert explicit value for identity column in table 'TBL_LAPTOP_BOOKINGS' when IDENTITY_INSERT is set to OFF.

i ran SET INDENTITY_INSERT TBL_LAPTOP_BOOKINGS ON before i ran my script... and i also checked, we are running SQL 2000 with service pack four, because of the cursor error....

so im just wondering, is there anyway to make identity_insert to always be on, or any other way to have a unique id in my booking_id field??

Thanks Guys, Justin

View 1 Replies View Related

Identity Field With A Query ?

Sep 14, 2006

I want to kown if a field is an identity (counter) using a query or a stored procedure ?


Thanks

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved