Hi,
I need to get recordset returned by oracle sp in execute sql task to process futher in For Each Loop container and on same lines i want to use oracle sp for extraction data in Data Flow Task. Could anybody suggest if it how we could do it in SSIS?
All suggestions will be highly appreciated.
Thanks,
Lalit
Good day!
Does SQL Server has aby analog of ORACLE's Ref Cursors? ex: "type [name] is ref cursor"?
Thanks you!
Hello,
Does SQL server 2005 provide capability to run Oracle stored procedures. I already have a linked server established for Oracle.
I have several oracle stored procedures that :
a) Accept multiple input parameters and return multiple out parameters.
b) Accept multiple input parameters and return a REF CURSOR as out parameter.
If you have any sample code, can you please post it here along with any suggestions. I researched, but there seems to be no solution, especially for REF CURSOR. Much appreciate it.
Thnx
Sam
Hi,
I am using XML source component to integrate an xml file into an sql server data base. So for this I have tried to test only this XML component with a small XML file (43 KO) and its XSD (434KO) (not generated using XML component), so my package contain a dataflow with only the XML source component. When I execute the package, in the progress window I get:
1- Validation step 100%, (generate warning, because the outputs are not used)
2-Preparation of execution step 100%
3-Excution step
But when the "Execution step" starts it does not stop and it does not fail, so the XML component keeps the yellow color indifinely and it generate temporary file in "Temp" repository.
I run this package in a box with SQL server 2005 SP2 with, 8 Processor and 4GO of RAM.
So is there any solution or explication for this problem. Is it a limit of SSIS? , and how can I increase the SSIS RAM.
I also generated an XSD file using the XML component, but I get the same problem.
Thank you in advance
Hi,
we're accessing a SQL Server as a source for some SSIS packages using quite complex SQL commands. We have dataflows getting data from up to 10 queries. The problem is that SSIS starts all these queries in parallel using up all the memory of the server (the source SQL server, not the server SSIS is running on). So the queries are very slow. Is there any way to force SSIS to start the queries after each other?
I already browsed the web for some answers on that and I'm not very optimistic... Maybe the only solution is really to feed the result of the query in raw files and process them later...
Thanks,
I have created a DTS package that pulls data in from Oracle into SQLServer. When I run it directly on the server (from EnterpriseManager), it works fine. When I run it from Enterprise Manager on aclient machine that does not have the Oracle client software, it doesnot run, giving me the error: "The Oracle client and networkingcomponents were not found...". I was hoping I wouldn't need to havethe client software installed on a machine other than the server whereSql Server is running. The problem here is that there are a number ofmachines from where I would like to execute this DTS package that I donot want to install/configure the Oracle client software. I don'tquite understand why the configuration of the client is importanthere. In my mind, when I am using enterprise manager from a clientmachine, I am using it sort of like a terminal services client toconnect to the server. I guess there is a lot more happening in thebackground.Thanks for any feedback,Marcus
View 2 Replies View Related
How investigate type of a connection to DB( MS SQL or Oracle) during execution of a packet?
In the time of executon of packet I must determine type of connection? What do good practices exists?
Thanks In Advance.
Currently, I am working SSIS project that its data source from ORACLE 9i. I installed full SSIS in server and also ORACLE. So, I have three connections available in server. They are the following below.
Oracle Client
Microsoft OLE DB Provider for Oracle
Oracle Provider for OLE DB
The problem is the three component can not recognize parameterization and ORACLE store procedures.
Finally, I executed the store procedures by ORACLE package from command prompt (bat files). So, the command execute from SSIS package.
Ashari Imamddin
wondering if someone can share their wisdom about getting record count from Source Oracle DB using SSIS?
View 5 Replies View RelatedHello All
I was trying to configure my package. I have a Oracle 10g DB as source. I used "Oracle provider for OLE Db" as provider in connection manager. I entered user name and password.
When I set my package protection level to : DontSaveSensitive and executed the package
it gives me this error:
[Connection manager "WDEV.wuser1"] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-01005: null password given; logon denied".
When i go back to connection manager I see the blank password. I retype it but again when I execute I get the above error.
I configured the package with same setting and in the config file I mentioned the passwords and all details but again I when I execute the package i get the below error:
[Connection manager "WDEV.wuser1"] Error: An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Since it was not storing password OR not executing without password I set the Protection Level to : "EncryptAllWithPassword"
and excute it I works Great. and runs Awesome. Except I get this Warning
[OLE DB Source [1]] Warning: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
Question 1: "CAN I IGNORE THIS WARNING?'
Question2: "THE PACKAGE RUNS GOOD WHEN I SET THE PROTECTIONLEVEL =EncryptAllWithPassword. With this settings when i configure my package it gives me error. Why is it so Any Help please Below plz find the config file?"
[OLE DB Source [1]] Error: The AcquireConnection method call to the connection manager "WDEV.wuser1" failed with error code 0xC0202009.
[Connection manager "WDEV.wuser1"] Error: An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
x<?xml version="1.0" ?>
- <DTSConfiguration>
- <DTSConfigurationHeading>
<DTSConfigurationFileInfo GeneratedBy="AWM" GeneratedFromPackageName="Package1" GeneratedFromPackageID="{289810A-ASD0-4698-BAC5-3270D3E5D17D}" GeneratedDate="9/9/2007 10:18:10 PM" />
</DTSConfigurationHeading>
- <Configuration ConfiguredType="Property" Path="Package.Connections[WDEV.wuser1].Properties[ConnectionString]" ValueType="String">
<ConfiguredValue>Provider=OraOLEDB.Oracle.1;Data Source=WDEV;User ID=wuser;Password:XYZ;</ConfiguredValue>
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[WDEV.ccuser1].Properties[InitialCatalog]" ValueType="String">
<ConfiguredValue />
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[WDEV.wuser1].Properties[Name]" ValueType="String">
<ConfiguredValue>WDEV.wuser1</ConfiguredValue>
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[WDEV.wuser1].Properties[Password]" ValueType="String">
XYZ<ConfiguredValue />
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[WDEV.wuser1].Properties[ServerName]" ValueType="String">
<ConfiguredValue>WDEV</ConfiguredValue>
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[WDEV.wuser1].Properties[UserName]" ValueType="String">
<ConfiguredValue>wuser</ConfiguredValue>
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Properties[PackagePassword]" ValueType="String">
<ConfiguredValue /> AWM
</Configuration>
</DTSConfiguration>
Thanks a lots
Guys,
I am having a nightmarish time getting an Oracle Connection Manager working as a source in my SSIS package.
The CM is called "OLTP_SOURCE". When I inspect the configuration and test connection, it succeeds, however when I go to run the package (both in debug mode and via DTEXECUI) I get the following error:
The AcquireConnection method call to the connection manager "OLTP_SOURCE" failed with error code 0xC0202009
After this happens, if I go into an OLE DB Source within a DFT, I get the following:
No disconnected record set is available for the specified SQL statement.
Now, if I go back into the CM, enter the password and test, it succeeds. From this point, I will go to preview the data in the OLE DB Source, and it comes back fine. However, when I go to run the package, I get the same error time and time again:
The AcquireConnection method call to the connection manager "OLTP_SOURCE" failed with error code 0xC0202009
The quick reader will suggest that the password is not being persisted. To this end, I have tried each of the following techniques to no avail:
1. Double, Triple and Quadruple check that the "save" password option in the CM is checked.
2. Hardcode the connection string in the dtsx XML-behind.
3. Enable Package Configurations and hardcode the connection string in the dstsconfig file.
4. Run the dtsx file using DTEXECUI, providing it with the configuration (that includes the hard-coded password).
5. Run the dtsx file using DTEXECUI, providing it the connection string in the Connection Managager override UI.
Can anyone help shed some light on what might be going on? So far, it is obvious that there has to be something that I am doing wrong because (syntax dialect differences aside) I can't imagine that Oracle sources should be this much of a headache.
Thanks,
Rick
Dear Sir,
We met a problem when we move on Oracle 10g from Oracle 9i in the loading process. The scenario is that SQL Server as Data Warehouse, SSIS as ETL tool. But the length of string column as data source table in SSIS grows up 4 times when using Oracle 10g. For example, ABC table x varchar2(8) --> x varchar(32) -->x varchar(8) --> x varchar(8) {Oracle 10g SSIS(source) SSIS(target) SQL Server}
This doesn€™t influence the loaded result (I did not find any problem until now), but that influence loading performance and we worry about potential problems.
Do you have any idea or have you met the same problem before?
Thanks,
Jacob
Hi,
I was trying to connect to Oracle Source in SSIS
1. Err: Test connection failed because of an error in initializing provider. Oracle Client and networking components were not found
Sol: I installeed the Oracle Client tools
2. Err: ORA -12154: TNS: Could not resolve teh connect identifier specified
Sol: Then I point out the TNS file
3. Now I coonect the Oracle db . I go to Connection Manager . Specifies the provide as: Native OLE DB Oracle Provide for OLE DB, Select my DB, provide teh user name and password. and check if the connection passed.
Then in my data Flow Task when I add this source and check the Colmns its gives me an error./ sort of warning
The component reported the following warnings:
Warning at {C947B.......} [Ole DB Source[1]]: Cannot retrieve the column code page info from the OLE DB provider. if the components supports teh "DefaultCodePage" property, the code page from that property will be used.....
Will this warning has an significance. i dont see any error in my output data. but is there something I m doing wrong.
4. When I set my ProtectionLevel under Security in package property to "Dont Save Sensitive" in order to easily configure the package I m getting this error: failed Validation. The default one was EncryptSensitiveWithUserKey then its running smoothly.
Can somebody advice me on this?
I addded the all the errors and solution for 1 and 2 becuase in that way this will be helpful in future.
help - I€™ve been stuck on this for days.
My software vendor limits the sessions to one (1) per log-in to Oracle 9i and I€™m having tons of problems trying to extract data through an SSIS package. Everytime I run the package SSIS already logged in and the OLE DB source fails because of the sessions exceeded error.
Is there any way to limit the connection to just when I need the data to pump across on the OLE DB source?
Thank you very much for any help.
Regads,
Nestor
Hi,
I'm new to SSRS but have a problem connecting to Oracle. I have placed my reports upon a reporting server but the shared data connection isn't working and I'm confused as to why. I have specified the name, connection type as "Oracle", set the correct user id and password for the credentials and the connection string as for example 'Data Source=oracleExample;Unicode="True"'. I also have set the correct entry in the tnsnames.ora file for this datasource, example:
"oracleExample =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 12.23.45.23)(PORT = 3425))
)
(CONNECT_DATA =
(SID = oracle)
)
)"
Unfortunately I receive the following error when trying to connect.
"
An error has occurred during report processing.
Cannot create a connection to data source 'oracleDataSource'.
For more information about this error navigate to the report server on the local server machine, or enable remote errors
"
I'm mystified as to what the issue is. Any ideas? Would restarting the report server pick up the tnsnames.ora file? I have this working locally using report designer.
Any help, much appreciated.
I'm attempting to use SSRS (2005) with my Oracle RDB database (old DEC RDB), using an ODBC driver. I am able to create a report, and view data, but I need to add some report parameters to filter the data. When I attempt to use parameters in the query, I either get a syntax error, or a message that my odbc connection cannot use "named" parameters, and that I should use "unnamed" parameters.
Here is a snippet of my sql query:
SELECT Application_Notes.Lease_Application, Application_Notes.Followup_Code,
<...>
FROM
Application_Notes Join
<...>
WHERE
(Application_Notes.Tickler_date >= {ts '2008-02-08 00:00:00'} AND
Application_Notes.Tickler_Date < {ts '2008-02-09 00:00:00'} )
The "Tickler_Date" field is a binary date field. The above syntax is pulled from a Crystal Report, which I am considering moving over to SSRS. Ideally, I would like the user to enter a single RunDate parameter, and have the query do the following:
Where (Application_Notes.Tickler_Date >= @RunDate and
Application_Notes.Tickler_Date < (@RunDate + 1 day) )
If the user has to enter two dates, that will be fine, but I can't seem to get past the errors.
Thanks,
Paul
What could be simpler: map a flat file record structure, extract the data, and populate essentially the same flat file record struc in an Oracle table. Let the fun begin.
Specifically: the flat file record struc is fixed length 196 bytes. A particular field consists of 4 bytes of Integer data; IS deals very nicely with the definition, does not appear to be any issue with that. The issue is trying to get the 4 bytes of integer to map and load into the Oracle table. The data type in the flat file def is DT_UI4. The data type in the Oracle target is DT_NUMERIC. One would think that perhaps a simple transform and Viola?! I've defined the transform but does not seem to matter - whatever I try yeilds the same results.
I 've tried many different src/trg data type defs., but all yeild the same results.
Execution Results from debug:
Everything validates and then...
[kcd [8671]] Error: Data conversion failed. The data conversion for column "load_time_min" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
[kcd [8671]] Error: The "output column "load_time_min" (11050)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "load_time_min" (11050)" specifies failure on error. An error occurred on the specified object of the specified component.
Any ideas appreciated!
Thanks.
Hello Everyone,
Please do inform me, how can I check if there is a new record or changed record from the source.
NOTE: my source is Flat File and destination is Oracle Table.
What is needed from my side is the history load (Type 2).
This is not possible thru SCD component in Integration Services, If my source is Oracle (Even after I had added the parameters in my OLE DB)
Please do inform me about this process. Very important.
Thank you
Hi,
I have several oracle reports which running in SharePoint Integrated mode. They were working well when the SharePoint server and report server in same machine. But after that the report server move out to another machine, we got the problem with connection to oracle databasen. Reports with Sql server as data source has no problem at all.
We have installa both oracle client and odp.net in both machines, and tried to give Network Service full access right in
Bin catalog in oracle client but nothing helps. Please help!!!!!
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'Ellentst'. (rsErrorOpeningConnection)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
In log file:
Cannot create a connection to data source 'DatabasName'. ---> System.Exception: System.Data.OracleClient requires Oracle client software version 8.1.7 or greater.
We have installed oracle client version 10.2.0 in both machine.
Provider cannot derive parameter information and SetParameterInfo has not been called. (Microsoft OLE DB Provider for Oracle)
I am getting the above error while opening the parameter box at OLEDB source for Oracle using SQL command option at Data Access Mode?? Can you any one please help me in this regard and trouble shoot this problem..
Hi,
I have my datasource in Oracle9i and destination is Sql2005. I am connecting to Oracle 9i through OLEDb provider and when I connect to my DataSource using OLE DB Data Source, I get the following error:
Warning at "guid code": Cannot retreive the column code page info from the oledb provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale Id will be used.
Could anyone please help me trouble shoot this problem.
Regards,
Sudhakara.T.P.
sudhakaratp@hotmail.com
Hi all, while executing my ssis package Im getting this error
" the product level is insufficient for component "data reader source" "
but through the bussiness intelligence while debugging it was executing successfully,
but only after deploying the package on to the IS server, while executing getting this error
I checked with the server version also, its was with service pack 2
can I get any help
thanks in advance
I am trying to create new data source. I already tried these data sources
Oracle Provider for OLE DB
Oracle Client Data Provider
Microsoft OLE DB Provider for Oracle.
After configuring when i test the connection, it tells connection succeeded but if i click on then giving the error "The given path is not support".
In many DTS packages I have used parameterised queries for incremental loads from Oracle database sources using the Microsoft ODBC Driver for Oracle.
Now I want to migrate these packages to SSIS, but the OLE DB connection for Oracle does not support parameters.
I cannot use the "SQL command from variable" data access mode because of the 4000 character limitation on the length of string variables and expressions.
Am I missing an obvious workaround?
Hello All,
I have a unique problem while connecting to oracle source with a 64 bit processor. I can connect to the oracle from the command prompt in the 64 bit processor but not from SSIS.
The acutal problem is, when check the properties of the connection manager and provide a provider for oracle, and then provide username and password and click on test connection. I get the following error:
"Test Connection failed because of an error in initializing provider.ORA-06413: Connection not open"
Regards,
Raju
I have an issue when using Report Manager for viewing reports that use a certain Oracle data source. When viewing the reports in Report Designer the reports display without problems. But when trying to display the reports with Report Manager, after deploying the reports to the Report Server, I now get the following error message:
blablabla....ORA-12705: invalid or unknown NLS parameter value specified
For testing purposes I am running Report Designer, Report Server and Report Manager locally on a PC with Windows XP. I am using Reporting Services 2005, IIS 6, Visual Studio 2005, an Oracle 9.x client and an Oracle 9.x (not 100% sure) database that is hosted on a remote server.
Earlier I got an error message that stated "ORA-12154: TNS: could not resolve the connect identifier specified". Access rights to some Oracle folders for the Network service account did the trick here but then I got the "NLS parameter" error message. What I have tried to do is removing the NLS_LANG register variable and also modified the value of the variable so that it matches the value of the NLS_LANG variable on the server that hosts the Oracle database, but none of them have worked. Any ideas?
Maybe this is an issue that is more appropriate in an Oracle forum but what the heck..the problem could reside in Reporting Services..
Thanks, Stefan
Hello all, I have read many topics about this error but it doesn't fix my packages in my particular case. The problem is that I access to a database in Oracle using the Ole DB provider for Oracle
I get that the mentioned error when I try to run a job from the agent.
1 - When I set "DontSaveSensitive" to ProtectionLevel I get this error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E4D Description: "ORA-01017: username/password no valid".
This is normal because the connection needs a password.
2 - When I set "EncryptSensitiveWithUserKey" to ProtectionLevel I get the mentioned error: "Failed to decrypt protected XML node "DTSassword" ..
The other options to ProtectionLevel doesn't work neither. I have tried to write the password in the field required...
I have tried many possibilities but nothing new, it doesn't work.
Does anybody have this error with Oracle as source file ???
Thank you .
Hi,
I'm trying to use query parameters with an Oracle OLEDB Source in a data
flow task and I'm having problems.
I've tried formatting the query each of the following ways...
--
select
frq_code,
frq_name,
update_frq,
uptime_frq
from frequency_bcs
where update_frq > ?
and update_frq <= ?
--
Parameters cannot be extracted from the SQL command. The provider might not
help to parse parameter information from the command. In that case, use the
"SQL command from variable" access mode, in which the entire SQL command is
stored in a variable.
Additional information
---> Provider cannot derive parameter information and SetParameterInfo has
not been called. (Microsoft OLE DB Provider for Oracle).
Hi,
Urgent Help required..........
Can anyone explain me steps how to parameterized query to send oracle.
If you know any other control which help to do this rather than OLEDB source.
Please let me know.
THanks
I wanna to create a linked server which connect to oracle. Â Here are my steps:
1.Install Oracel drivers Oracle Data Access Components.
2.Configure the Oracle Ole DB provider to run inside the SQL Server process and configure it to accept parameters. exec
master.dbo.sp_MSset_oledb_prop
'ORAOLEDB.Oracle',
N'AllowInProcess', 1
exec master.dbo.sp_MSset_oledb_prop
'ORAOLEDB.Oracle',
N'DynamicParameters', 1Â
3.Create linked server with scripts:
exec sp_addlinkedserver N'MyOracle1', 'Oracle', 'ORAOLEDB.Oracle', N'//10.154.14.235', N'FetchSize=2000', ''
exec sp_addlinkedsrvlogin @rmtsrvname='MyOracle', @useself=N'FALSE', @rmtuser=N'root', @rmtpassword='Sqlexp!23' Â Â
4. After create successful and testing the connection ,I got the error below.(My windows firewall is turn off)
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
Cannot initialize the data source object of OLE DB provider "ORAOLEDB.Oracle" for linked server "MyOracle".OLE DB provider "ORAOLEDB.Oracle" for linked server "MyOracle" returned message "ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA". (Microsoft SQL Server, Error: 7303)
How can I create a Cursor into a Stored Procedure, with another Stored Procedure as data source?
Something like this:
CREATE PROCEDURE TestHardDisk
AS
BEGIN
DECLARE CURSOR HardDisk_Cursor
FOR Exec xp_FixedDrives
-- The cursor needs a SELECT Statement and no accepts an Stored Procedure as Data Source
OPEN CURSOR HardDisk_Cursor
FETCH NEXT FROM HardDisk_Cursor
INTO @Drive, @Space
WHILE @@FETCH_STATUS = 0
BEGIN
...
END
END
I am using execute sql task to run a stored procedure in oracle database which returns a resultset. This works. Now I need to send the ouput to a destination table in a sql database. Should I use for each loop to pick the resultset and insert it into the destination one by one (which I dont think is a great idea) or is there a better way to accomplish this task (in data flow task) ?
When I use dataflow task instead of execute sql task, the main issue is I am not able to see the output columns when I execute an oracle stored procedure, but when I see the preview I can see the resultset . But I can see the output columns for a sql server stored procedure.
Hi all,I am having trouble getting linked Oracle 9 server in MS SQL Server2005 Express to work properly. My machine is running Windows XP.The Microsoft and Oracle OLE DB Providers have problems dealing withOracle's Numeric Data Type, so I decided to use Microsoft's OLE DB forODBC Provider and an Oracle ODBC source. When using the Microsoft ODBCfor Oracle Driver in my ODBC source I have inconsistent behavior.Sometimes my queries are processed properly, then other times I get thefollowing errorOLE DB provider "MSDASQL" for linked server "ODBCBEAST" returnedmessage "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttrfailed".OLE DB provider "MSDASQL" for linked server "ODBCBEAST" returnedmessage "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttrfailed".OLE DB provider "MSDASQL" for linked server "ODBCBEAST" returnedmessage "[Microsoft][ODBC driver for Oracle][Oracle]".Msg 7303, Level 16, State 1, Line 1Cannot initialize the data source object of OLE DB provider "MSDASQL"for linked server "ODBCBEAST".I have no idea why sometimes I can connect to the linked server with noproblems andwhy other times it performs like this. I'm not changing anything aboutthe system I can think of. When I use an Oracle client (PL/SQL) I haveabsolutely no problems connecting. TNSPING returns that the connectionis good.This is unacceptable so I decided to try my luck with the Oracle 10gODBC driver. However when I use this and perform an openquery selectagainst the linked server I get back only 11 rows, when I know that thedatabase has over 100 rows (in fact when using the Microsoft ODBCdriver and it works that's what I get). I figured maybe the buffersetting needed to be raised in the ODBC configuration so I took it from64000 to 600000 (a magnitude of 10) but I still get back only 11 rows.I'm at my wit's end.Any suggestions on resolving one or the other problem would be muchappreciated.Thanks much
View 2 Replies View Related