How To Get Table Column Name At Run Time
Jun 18, 2008I want to get a table column name at run time through query. Can any one help me.
ehsan ulhaq dar
ADVERTISEMENT
How To Create Key Time Column And Key Column For A Case Table And A Nested Table For Time Series Algorithm?
Jun 18, 2007Hi, all experts here,
Thanks for your kind attention.
I want to use time series algorithm to mine data from my case table and nested table. Case table is Date table, while nested table is the fact table. E.g, I want to predict the monthly sales amount for different region (I have region table related to the fact table), how can I achieve this?
Thanks a lot and I hope it is clear for your help and I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
Questions On Key Column In Case Table And Key Time Column In Nested Table Using Time Series Algorithm
Jun 4, 2007Hi, all experts here,
Thank you very much for your kind attention.
I am confused on key column of case table and key time column of nested table by using Time Series algorithm.
In my case, the case table structure is as below:
Territory key text (the ID is actually dimrisk_key, in this case, I use the name column binding to combine the Territory column of case table Dimrisks),
While the nested table structure is as below:
Cal_month key time (in this case, actually the ID is dimdate_key, again, I used name column bining property to bind the Cal_month to the ID)
So my question is, as the key column of case table has been set to be Territory, as a result, does the model training still cover all the cases (rows) based on the ID of the table?
Also, in the nested table, as the key time column has been set to Cal_month rather than Dimdate_key of the nested table, as a result, would the single series based on the cal_month?
Hope it is clear for your advices and help.
And I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
Column In Table - Text To Time
Sep 19, 2013I have the following time value column in a table:
next_run_time
230000
73000
70000
The above actually translates to 23:00, 7:00AM,7:30AM, etc. How can I convert this into a meaningful time value?
[CODE]
SELECT NEXT_RUN_TIME FROM TABLE T1
[CODE]
SQL Server 2008 :: Calculated Time Difference Column In Create Table
Jul 14, 2015How to include a time difference column using 2 other date columns during creation of a table ?
The requirement is to create a table and include the following columns:
1.Downtime start date & time
2.Downtime end date & time
3.Downtime Duration in hh:mm (calculated date difference between column 1 and 2)
Splitting SQL Server Date/Time Column Into Access Date Column And Access Time Column
Jan 24, 2008I have an SSIS package that moves data from SQL Server to an legacy Access database. In SQL Server, there is a date/time column that I need to split into a separate date column and time column in the access database. Initially I just created a derrived column for the time and set the expression equal to the source date/time column from SQL Server. Unfortunately, that just makes the date column and time column the same having the full date/time.
What expression can I use during a derrived column transformation to assign just the date to a derrived column and just the time to another derrived column?
Thanks,
Steve
Key Time Column For Time Series Algorithm
May 31, 2007Hi, all experts here,
Thank you very much for your kind attention.
I am confused on key time column selection. e.g, I want to predict monthly sales amount, then what column in date dimension should I choose to be the key time column? Is it calendar_date (the key of date dimension) column or calendar_month?
Thanks a lot for your kind advices and help and I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
Transact SQL :: Calculate DateTime Column By Merging Values From Date Column And Only Time Part Of DateTime Column?
Aug 3, 2015How can I calculate a DateTime column by merging values from a Date column and only the time part of a DateTime column?
View 5 Replies View RelatedGetting Time From Date/time Column
May 16, 2008How can I obtain just the time portion from a date/time column?
My data contains "2008-05-19 09:30:00.000"
Actually, all I want/need is the hh:mm part of it.
Thanks,
Walt
SQL 2012 :: Converting Time String In Temp Table To Military Time Then Cast As Integer?
Dec 26, 2014I need to take a temporary table that has various times stored in a text field (4:30 pm, 11:00 am, 5:30 pm, etc.), convert it to miltary time then cast it as an integer with an update statement kind of like:
Update myTable set MovieTime = REPLACE(CONVERT(CHAR(5),GETDATE(),108), ':', '')
how this can be done while my temp table is in session?
Adding A Time Column To A Date Column
Jul 20, 2005I have two columns in a table:StartDate DateTime and StartTime DateTime.The StartDate column holds a value such as 07/16/2004The StartTime column holds a value such as 3:00:00 PMI want to be able to add them in a stored procedure.When I use StartDate + StartTime I get a date two days earlier than expected.For example, instead of 7/16/2004 3:00:00 PM StartDate + StartTime returns7/14/2004 3:00:00 PM.Can anyone point out wht I'm doing wrong with this one?Thanks,lq
View 2 Replies View RelatedHow Can I Create A New Table With Its Column Named From Another Table's One Column Value By Using A Select Sentence?
Sep 27, 2006For example,I have a table "authors" with a column "author_name",and it has three value "Anne Ringer,Ann Dull,Johnson White".Here I want to create a new table by using a select sentence,its columns come from the values of the column "author_name".
can you tell me how can I complete this with the SQL?
A Table/column To Table/column Data Check (was Help Please, SQL Something Simple)
Sep 15, 2006Hi all, I am not over familiar with SQL, I am a VB programmer, simply I need to achieve the following within Enterprise Manager.
I have 2 tables, different designs, different number of rows, I simply need to check whether the contents of a column in the first table is in a column in the second table, just simply a table/column to table/column data check for the same data content.
Easy Peasy for you guys, any help would be appreciated.
Get Time From Column
Jun 10, 2008Trying to get the records where the date = today and the time is only
within 15 mintues
So if the time was 10:20 i only get records 2 and 3
COLUMN STAT_DATE
1.2008-06-10T10:30:00.537
2.2008-06-10T10:15:00.530
3.2008-06-10T10:00:00.760
How To Put Only Time Data In Column?
Feb 28, 2007I know there is a DateTime data type in SQL server 2000.
But is there a way to only stor time value (hh:mm:ss)?
Time Out Of DateTime Column
Jun 18, 2001Hi Guys,
I have to take only time from DateTime column filed value.
Is there any function in SQL Server which will give us time only.
Thanks,
Rau
Date And Time In Same Column
Oct 24, 2013I have a column of data that is in this format (quotes to communicate it is in one cell if viewed in excel):
"8/18/2013 23:58"
Essentially, I have the date and time in one entry.... how do I go about querying, using SQL, the following?
- all data that is less than a specific date (I don't care about time)?
- differences in time (subtracting time, while not caring about date)?
I can do it if the date and time were in different columns, but they are together and I am stuck.
Package Run Time Into Column
Jun 21, 2007how can i get the package execution start or end time along with DATE as a derived column into the output table.
i tryed using getdate() as expression but it gives diff time as my pkg runs in a loop.
and i see a sys variable STARTTIME which just gives time.
any help appriciated
thanks
Small Date/time Column
Apr 24, 2001I have a smalldatetime column. When I did
SELECT * INTO MY_TABLE FROM YOUR_TABLE
WHERE CONVERT(VARCHAR(12), DATE_ENTERED, 101) > '01/01/2001' rows from 1998, 1999 came over.
Ideas !
Thanks,
John
Select Into And Add Ident Column At Same Time?
Jul 31, 2000Hi,
I am doing Select into to make a table (I want to skip the log), but I want to add an IDent column to the new table. Can I do this somehow in the Select into? I have tried a couple of approaches, but have come up short....
Thanks,
Judith
Default Date And Time For Column
Jul 26, 2005Hi,
How do I design a table column named UpdateDate that will give the default date and time upon inserting a record into the table
I'm using Enterprise Manager in MSSQL
Many Thanks
Time Diff Between 2 Values In The Same Column?
Aug 27, 2006Here is the sample data
nType dCDServerTime
02006-05-12 03:50:46.770
12006-05-12 04:00:59.153
962006-05-12 04:01:23.827
962006-05-12 04:16:01.297
142006-05-15 05:02:46.857
202006-06-23 03:23:36.970
I am trying to find the time diff between dCDServerTime of the "first" ntype = 1 and the "first" ntype = 96. There can be any number of rows with 1 and 96 but rows with 1 always come before those with 96.
I tried by putting a subset of the above result into a table variable but don't seem to get ahead without declaring more variables.
declare @t table
(Type int, ServerTime datetime)
insert into @t
select top 1 nType,dCDServerTime from tblEvent
where nGlobalCaseID = 11901643 and nType = 1
UNION
select top 1 nType,dCDServerTime from tblEvent
where nGlobalCaseID = 11901643 and nType = 96
select * from @t
Is it possible to do it with a single select?
Adding The Same Column To A Model More Than One Time
Jan 11, 2007I know that I can add a column to a mining structure and/or model more than once using XMLA. However, I am having a problem doing the same using DMX. I now that DMX does not support data binding and that it relies on the INSERT INTO... construct to essentially map the structure columns to the incoming comluns from the data source. I tried to use "AS" like I would in SQL but it doesn't seem to like it.
Can anyone confirm that this can only be done using XMLA and not DMX? If I am mistaken, it would be greatly appreciated if you could provide an example on how to do this using DMX.
For background on why I would want to add the same column to a model more than once please read this post.
Thanks.
Update Table 1 To Table 2 Depending Date Time + ID
Apr 26, 2008need help please on update only if .
i need to update only the field "val_holiday " (in table B from table A)
and olso to check on table B the "ID" + "new_date" only if exist
and update the field "val_holiday " (in table B)
and at the end of update change the field "field_check_update_if _ok" from 0 to 1
only the row that update in table B
select from table A
update table B
WHERE ..........................HOW ?
----------------------------------------------------------------- table A
ID fname new_date val_holiday field_check_update_if _ok
---------------------------------------------------------------------------------------------------
111 aaaa 15/03/2008 999 0
111 aaaa 16/03/2008 888 0
111 aaaa 18/03/2008 77 0
111 aaaa 19/03/2008 9 0
111 aaaa 20/03/2008 111 0
111 aaaa 21/03/2008 12 0
222 bbb 02/05/2008 15 0
222 bbb 03/05/2008 16 0
222 bbb 04/05/2008 9 0
222 bbb 05/05/2008 3 0
222 bbb 06/05/2008 90 0
222 bbb 07/05/2008 3 0
222 bbb 08/05/2008 3 0
222 bbb 09/05/2008 3 0
333 ccc 03/04/2008 4 0
333 ccc 04/04/2008 4 0
----------------------------------------------------------------- table B
ID fname new_date val_holiday
----------------------------------------------------
111 aaaa 15/03/2008 1
111 aaaa 16/03/2008 1
111 aaaa 18/03/2008 1
111 aaaa 19/03/2008 1
111 aaaa 20/03/2008 1
111 aaaa 21/03/2008 1
222 bbb 02/05/2008 3
222 bbb 03/05/2008 3
222 bbb 04/05/2008 3
222 bbb 05/05/2008 3
222 bbb 06/05/2008 3
222 bbb 07/05/2008 3
222 bbb 08/05/2008 3
222 bbb 09/05/2008 3
333 ccc 03/04/2008 4
333 ccc 04/04/2008 4
------------------------------------------------------------------------------
TNX for the help and for all
Update Table A To Table B Depending Date Time + ID
Apr 25, 2008need help please on update only if .
i need to update only the field "val_holiday " (in table B from table A)
and olso to check on table B the "ID" + "new_date" only if exist
and update the field "val_holiday " (in table B)
and at the end of update change the field "field_check_update_if _ok" from 0 to 1
only the row that update in table B
Code Snippet
select from table A
update table B
WHERE ..........................HOW ?
----------------------------------------------------------------- table A
ID fname new_date val_holiday field_check_update_if _ok
---------------------------------------------------------------------------------------------------
111 aaaa 15/03/2008 999 0
111 aaaa 16/03/2008 888 0
111 aaaa 18/03/2008 77 0
111 aaaa 19/03/2008 9 0
111 aaaa 20/03/2008 111 0
111 aaaa 21/03/2008 12 0
222 bbb 02/05/2008 15 0
222 bbb 03/05/2008 16 0
222 bbb 04/05/2008 9 0
222 bbb 05/05/2008 3 0
222 bbb 06/05/2008 90 0
222 bbb 07/05/2008 3 0
222 bbb 08/05/2008 3 0
222 bbb 09/05/2008 3 0
333 ccc 03/04/2008 4 0
333 ccc 04/04/2008 4 0
----------------------------------------------------------------- table B
ID fname new_date val_holiday
----------------------------------------------------
111 aaaa 15/03/2008 1
111 aaaa 16/03/2008 1
111 aaaa 18/03/2008 1
111 aaaa 19/03/2008 1
111 aaaa 20/03/2008 1
111 aaaa 21/03/2008 1
222 bbb 02/05/2008 3
222 bbb 03/05/2008 3
222 bbb 04/05/2008 3
222 bbb 05/05/2008 3
222 bbb 06/05/2008 3
222 bbb 07/05/2008 3
222 bbb 08/05/2008 3
222 bbb 09/05/2008 3
333 ccc 03/04/2008 4
333 ccc 04/04/2008 4
------------------------------------------------------------------------------
TNX for the help and for all
TSQL - Using ALTER TABLE - ALTER COLUMN To Modify Column Type / Set Identity Column
Sep 7, 2007Hi guys,
If I have a temporary table called #CTE
With the columns
[Account]
[Name]
[RowID Table Level]
[RowID Data Level]
and I need to change the column type for the columns:
[RowID Table Level]
[RowID Data Level]
to integer, and set the column [RowID Table Level] as Identity (index) starting from 1, incrementing 1 each time.
What will be the right syntax using SQL SERVER 2000?
I am trying to solve the question in the link below:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2093921&SiteID=1
Thanks in advance,
Aldo.
I have tried the code below, but getting syntax error...
ALTER TABLE #CTE
ALTER COLUMN
[RowID Table Level] INT IDENTITY(1,1),
[RowID Data Level] INT;
I have also tried:
ALTER TABLE #CTE
MODIFY
[RowID Table Level] INT IDENTITY(1,1),
[RowID Data Level] INT;
Update Column With Sequence Number Every Time
Sep 25, 2006hello friends
i want to update one column from my table regularly on sequence number i.e. 0,1,2,3,4,5
i created procedure but it is not working as per my output
declare @IndexIDGen int
declare @ID int
set @ID = 0
update temp_test set indexid = NULL
declare IndexIDGen cursor for select indexid from temp_test
open IndexIDGen
FETCH Next from IndexIDGen into @IndexIDGen
while @@fetch_status = 0
begin
update temp_test set indexid = @ID where indexid is null
set @ID = @ID + 1
print @id
fetch next from IndexIDGen into @IndexIDGen
end
close IndexIDGen
deallocate IndexIDGen
where i am going in wrong direction ??????
T.I.A
[Resolved] Change Column Value At Time Of Insert
Jan 29, 2008Prior to insert (into #JobListTable) I need to change the value of the 't2.plant_id' column (from #EquentialJobListTable). This column will have a value of 110, 300 or 320. If 110 then value should be SBGB2, if 300 then values should be RGWP and if 320 value should be RGWP. Is this possible to do?
INSERT#JobListTable
(
job_date,
job_number,
job_phase,
qty_received,
plant_id
)
SELECTt2.job_date,
t2.job_number,
t2.job_phase,
t2.qty_received,
t2.plant_id
FROM#EquentialJobListTable AS t2
LEFT JOIN#JobListTable AS t1 ON t1.job_date = t2.job_date
AND t1.job_number = t2.job_number
AND t1.job_phase = t2.job_phase
WHEREt1.job_date IS NULL
Transact SQL :: Time Column With Order Wise
Nov 17, 2015I have a table like below
CREATE table #TempTable (ID integer,CTime time(7),CType Varchar(1))
insert into #TempTable VALUES (1001,'16:50:05.0000000','I')
insert into #TempTable VALUES (1001,'13:27:49.0000000','O')
insert into #TempTable VALUES (1001,'20:44:00.0000000','O')
insert into #TempTable VALUES (1001,'21:12:00.0000000','O')
I need result like below screen shot
here 'I' stands for In,and 'O' for Out, in this example first In time not available
Transact SQL :: Total Difference Time In Last Column?
May 23, 2015I have the below query
DECLARE @GivenDate DATE='2015-05-13'
create table #table (LedgerID int,AttDate Date, checkedtime time,checkedtype varchar(1))
insert into #table (LedgerID,AttDate,checkedtime,checkedtype) values (1232,'2015-05-13','09:01:48.0000000','I')
insert into #table (LedgerID,AttDate,checkedtime,checkedtype) values (1232,'2015-05-13','13:05:52.0000000','O')
insert into #table (LedgerID,AttDate,checkedtime,checkedtype) values (1232,'2015-05-13','14:10:25.0000000','I')
[code]....
the result is like below
i need 'TotalDiffernceTime' column as new column (OUT1-IN1)+(OUT2-IN2).
i am using SQLServer 2008 R2
Transact SQL :: Getting Time Difference Between Same Column In Different Rows
Jun 21, 2015I have a table data like below
id type timestamp
1001 start1 10:34:23:545
1001 start2 10:34:24:545
1001 end2 10:34:24:845
1001 end1 10:34:25:545
1002 start1 10:34:25:645
1002 start2 10:34:25:745
1002 end2 10:34:25:945
1002 end1 10:34:25:965
I need the result as follows
id millisecond diff start1end1 millisecond diff start2end2
1001 end1 timestamp-start1 timestamp end2 timestamp-start2 timestamp
1002 end1 timestamp-start1 timestamp end2 timestamp-start2 timestamp
SQL Server 2008 R2
Transact SQL :: Sum Time Column After Pivot Query
May 18, 2015i have a table like below,
CREATE TABLE #ATTTABLE
(
Name VARCHAR(20),
AttDate DATE,
PresntTime TIME
[code]....
and then i pivot table by date as column wise using the below query and also displays total time by rowswise
SELECT t1.*, t2.Total
FROM (
SELECT name,[2015-08-01],[2015-08-02]
FROM (
SELECT name, AttDate,PresentTime
[code]....
now what i need is to display sum of time at last row as well, means total time of against date
SQL Server 2008 :: Time Difference With Dates In Same Column
Mar 17, 2015How do I find the time difference when the dates are in one column? I need to find hours and minutes between each row.
CREATE TABLE #Time ([TimeStamp] DATETIME, TimeDiff INT)
INSERT INTO #Time (TimeStamp)
VALUES ('2014-09-02 07:51:02.810'), ('2014-09-02 07:48:09.567'), ('2014-09-02 08:37:09.647')
, ('2014-09-02 16:16:42.593'), ('2014-09-02 08:06:13.387'),('2014-09-02 14:32:00.113')
DROP TABLE #Time