How To Get The Current Version?
Jul 16, 2007I just want to confirm if SP2 has been installed successfullly on my SQL Server Express, but I don't know where to check?
Any help would be appreciated...
ADVERTISEMENT
Ssis Error Converting Database From Version 539 To The Current Version 611
Jan 7, 2008I have an ssis package that downloads a SQL Server 2000 database and restores it to a SQL 2005 server. Ninety-five percent of the time it runs just fine, but every so often the job fails and I get the following set of error messages in the log file. (I have had to delete some of the proprietary information for this message to satisfy my boss like putting in [Database name] in place of the actual name of the database in the error message).
OnError, Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611.
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611.
OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551.
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551.
OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name].
OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name].
OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name]
FROM DISK = '[Path to back up file]' WITH REPLACE,
MOVE 'ASP_Live_Data' TO [Path to MDF file],
MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name]
FROM DISK = '[Path to backup file]' WITH REPLACE,
MOVE 'ASP_Live_Data' TO [Path to MDF file]',
MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
OnTaskFailed,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,(null)
Does anyone have any suggestions?
Determining Current Version And Path
Nov 2, 2005How can a program reliably determine the current version of SQL installed? And how can you get the path to the ToolsBinnOSQL.exe?
View 1 Replies View RelatedUpgrade From 2000 MSDE To 2005 Express - Enable TCP/IP By Default && Current Version Of SQL Running?
Jan 23, 2007i am working on upgrading the clients and server computers from 2000 MSDE to 2005 SQL Express Adv. Plan to upgrade using the template.ini.
i can find the version of sql server running on th server by @@version but how do i find the version of client connctivity components the computer has installed in order to ugrade?
1. somehow i need to know whether to upgrade a client computer CONNECTIVITY COMPONENTS from 2000 to 2005?
2. is there a way to enable tcp/ip in installation script of SQL Express?
THANKS
SQL Express Beta To SQL Express Current Version
Apr 1, 2006I have a database which was created in a beta release of SQL Server Express. It was also create when I had the .Net Framework 2.0 Beta installed.
Since then, I have installed .Net Framework 2.0 (Current Release) because that is what was required for MS SQL Server Management Studio Express.
When I try to connect to the DB now it says Cannot connect to server.
I also have the mdf/ldf files. When I try to attach them on another computer running the latest version of SQL Server Express it says:
Database 'Name' connot be upgraded because its non-release version (587) is not supported by this version of SQL Server. You cannot open a database that is incompatible with this vertion of sqlservr.exe. You must re-create the database....
Any ideas how i can get the mdf/ldf files converted over? Or how I can attach the the ealier version of sql server express?? thanks.
Get Rows Between Current Date And Current Time
Jun 8, 2008I've this query
SELECT
t1.ID, t1.Date, t1.Time,
t1.VALUE
FROM RESULT WHERE t1.Date>=CONVERT(VARCHAR(10),DATEADD(d,-7,GETDATE()),101) AND
t1.Date<CONVERT(VARCHAR(10), GETDATE(), 101)
Let's say, current date is 8 AUG 2005 and current time is 2045
So, i will get
ID | Date (this is datetime) | Time (this is integer) | Value
--------------------------------------------------
204 | 8/1/2005| 2359 | 90
205 | 8/1/2005| 2250 | 99
206 | 8/1/2005| 1950 | 88
...
...
207 | 8/7/2005| 1845 | 77
208 | 8/7/2005| 2255 | 77
209 | 8/7/2005| 2140 | 77
Can someone can show me to filter data between
t1.Date>=CONVERT(VARCHAR(10),DATEADD(d,-7,GETDATE()),101) AND TIME>=CurrentTime
t1.Date<CONVERT(VARCHAR(10), GETDATE(), 101) AND TIME<=CurrentTime
If current date is 8 AUG 2005 and current time is 2045, so the result shown as follow
ID | Date (this is datetime) | Time (this is integer) | Value
--------------------------------------------------
204 | 8/1/2005| 2359 | 90
205 | 8/1/2005| 2250 | 99
...
...
207 | 8/7/2005| 1845 | 77
I only have this query,
SELECT
t1.ID, t1.Date, t1.Time,
t1.VALUE
FROM RESULT WHERE t1.Date>=CONVERT(VARCHAR(10),DATEADD(d,-7,GETDATE()),101) AND
t1.Date<CONVERT(VARCHAR(10), GETDATE(), 101)
lack of idea to put the TIME condition.
Plz help me..
SQL Server Admin 2014 :: Restore A Database Of Higher Version To Lower Version?
Sep 1, 2014Is there any way to restore a database of higher version to lower version.
E.g. I have created a database in sql server 2012, created some tables & procedures in that.I took Full backup of that database. Can I restore it to sql 2008r2 or any lower version.
I know direct restore is not possible, I have to use either import or export option or generating script,but i want to know is there any easy step to do so.
Vimal Lohani
SQL DBA | MCP (70-461,70-462)
Can I Install A Enterprise Version Analysis Service On A Standard Version Of SQL 2005 Server?
Jul 25, 2006Hi all,
Since some analysis services features are only available in Enterprise version , I have to upgrade my SQL 2005 server from standard edition to enterpise edition.
So I uninstall originial standard version of analysis service and install a Enterprise version. However, the analysis service is still a standard version after installation.
Is it possible to keep data engine as standard version and install a enterprise version of analysis service?
Thank you very much
Tony
What Sql Server Version To Buy? Difference In Performance Between The Workgroup And Standard Version
Feb 19, 2008Hello,I have been searching and reading a lots of information on the microsoft website about the different version of SQL server, but still can not make my decision.In term of performance, is there a real big difference between the workgroup and the standard version? The workgroup is limited to 3 GB of RAM while the standard is unlimited, would that really change the performance if my server has 16Gb or RAM?The price difference is pretty substantial so if could only have to buy the workgroup , it would be better.One more question, regarding the type of licence, my server has 2 processors, could I avoid buying 2 licences and get the Server plus CAL instead. I am using this server to host 4 web-application running on SQL server. Each database is about 15 MB.Thanks in adavance for your advises.Arno
View 3 Replies View RelatedChanging From SQL Server Enterprise Evaluation Version To Developer Version
Oct 30, 2007I am wondering if it is possible to change from SQL Server Enterprise Evaluation Version to Developer Version. The reason is because the Enterprise Evaluation version expires after 180 days. So if I create reports and cubes in Enterprise Evaluation I can import them into Developer Edition right? Should I remove the Enterprise Evaluation version after 180 days or leave it then install Developer Edition?
View 1 Replies View RelatedThe Database 'x.MDF' Cannot Be Opened Because It Is Version 611. This Server Supports Version 607 And Earlier??
Mar 11, 2006Hi,
I have tried to attatch a database ,created by SQL server Express within a C# application , in SQL server 2005 Enterprise edition, but the following error message appears:
-----------------------------
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'MEDO'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft SQL Server&ProdVer=9.00.1187.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The database 'E:X.MDF' cannot be opened because it is version 611. This server supports version 607 and earlier. A downgrade path is not supported.
Could not open new database 'E:X.MDF'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 948)
------------------------------
so , how can I solve this problem , I need to reed the data resides in the tables of 'X' database , how can I do it?? please help me.
Thanks in advance for any help.
Aya.
Want To Upgrade Evaluation Version Of SQL 2005 To Full Retail Version. How Would I Do That. Thanks
Jan 31, 2007Want to upgrade Evaluation version of SQL 2005 to full retail version. How would I do that. Thanks very much for your hel
Sam Commar
Integration Services :: Package Migration From Version 8 To Version 6 Failed
Sep 22, 2015I have received the error message "Package migration from version 8 to version 6 failed".I have developed a SSIS package with Visual Studio 2013 which gives me PackageFormatVersion of 8. I then deploy my package to the ssisdb catalog that is running on a SQL Server 2012, this works fine but when I try to execute the package the error arises…due to SQL Server 2012 has a PackageFormatVersion of 6 and it can’t run something that has a greater version.I haven’t seen any good solution for this but one that would work for me would be to upgrade the Integration Services Server from 2012 to 2014, leaving everything else in 2012 (database, ssms, ssas, ssrs).Would this solve the package format problem? Would I then be able to execute my packages in the ssisdb catalog?
View 3 Replies View RelatedAfter Restoring MASTER Database, Can't Start SQLServer Service: Configuration Block Version 0 Is Not A Valid Version Number
Jul 16, 2007Now, I checked and verified that my backup version of SQL Server is the same as the version installed on the computer I'm restoring too.
I have SQL Server on a production machine that I backed up and want to test a full restore on a dev machine to make sure it will work when I need it to.
Now that I've run the restore command on my tape backup and go to restart the SQL server service I receive:
Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
I'm afraid I don't understand why this is happening. If the builds are the same, then shouldn't restoring the MASTER database have worked normally and I'd be able to restart the service now?
Any thoughts or suggestions?
Upgrade Trail Version With A Full Version Of Ms Sql-server
Apr 20, 2007We want to licence a trail version 2005 EN with an fullversion of MS Sql server 2005 EN. Is that possible?
Conworx
HELP Wanted: Installing Full Version Over Trial Version
Dec 7, 2007I have the trial version of SQL Server 2005 installed and have setup a couple of databases. This trial version will expire in another few weeks. I recently purchased a copy of the software and want to install it. Will I lose my databases, user info, etc? How do I go about installing without losing anything?
View 3 Replies View RelatedUpdading Sql Server 2005 From 32bit Version To 64 Bit Version
Mar 12, 2007We have a 64bit os machine that we accidently loaded the 32 bit version of sql server on. We now want to upgrade it to 64 bit sql server, but we now have a production database on it. My understanding is that all I have to do is detach the production database, upgrade to 64bit sql server, then reattach the database. Is this really all I have to do?
View 4 Replies View RelatedThe Version Of Component **** (11773) Is Not Compatible With This Version Of The DataFlow.
Dec 12, 2007
I started this thread as the last attempt to sort the issue out.
I have an SSIS package that loads data from a .csv file into my database. It works fine on my developer machine. I start it programmatically or from Management Studio or from Visual Studio, and it works. Then I deploy it to the MSDB database on the computer on which it will have its final place. There again I can start it from Management Studio or from Visual Studio (using the source file), and it works. But when I start it programmatically, it just fails telling me:
Package Warnings:
Package Errors:
The version of component "****" (11773) is not compatible with this version of the DataFlow.
Component "component "Derived Column" (13627)" could not be created and returned error code 0x80070005. Make sure that the component is registered correctly.
The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Flat File Source;Microsoft Corporation;Microsoft SqlServer v9; (C) 2005 Microsoft Corporation; All Rights Reserved; http://www.microsoft.com/sql/support;1".
component "Agreement File" (11773) failed validation and returned error code 0xC0048021.
One or more component failed validation.
There were errors during task validation.
Maybe the source of the problem is that this machine is a 64-bit one, while the developer machine is 32-bit one. But why does the package run fine when I start it from Management Studio?
Any help would be appreciated.
FMikee
Upgrade From SQL Server Standard Version To Enterprise Version
Nov 8, 2007Can some one here give me more insight about how to upgrade a SQL Server 2005 Standard Version (32 bits) to a SQL Server 2005 Enterprise Version (32 bits) as default instance on a Windows 2003 enterprise OS (32 bits). I want to know what is the easist way and what is the safest way. May I preserve some settings I have for the STD version, or I have to start from strach again to configure the server? Is there any catches, anything I should have attention to (We are using heavily about CLR and fulltext indexing)?
Thanks a milliom
Ning
SQL Server 2k Enterprise Version And Development Version Together
Apr 11, 2004Hello,
I installed the SQL Server 2k EnterPrise version and developer version on the same version, and the developer version is an instance "Development".
How do I expose both of them to internet? Just open both of them to port 1433? And on the client side, just say IP and IP/Development? Do I need specific set up, will they conflict?
Thanks,
Found Version Not Equal To Expectd Version
Nov 12, 2007The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'C.0.8.54'. the expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights. I'm getting this whenever try to access the report server via SSMS, I have tried to upgrade via the Reporting Service Configuration Manager but get an error message similar to above except it says: The database version (C.o.8.54) does not match your Reporting Services installation. This version of the database cannot be upgraded. You must use a different database. Has anyone seen this before? I can create a new database, but don't want to loose all my reports. Any ideas. Oh, not even sure if the backups exist from before this error, I've spent 2 weeks trying to get access to the server so I could try to upgrade, only to get the above results. Thanks for your help, David
View 5 Replies View RelatedNon-release Version (600) Is Not Supported By This Version Of SQL Server
Apr 27, 2006I downloaded the 101 Samples installation (i.e. 101SamplesCS.msi) from Microsoft's website, which contains SQL Server database files.
While working with the databases in the "Data Access" samples from the 101 Samples projects, I get the following error:
"Database <mdf_name> cannot be upgraded because its non-release version (600) is not supported by this version of SQL Server. You cannot open a database that is incompatible with this version of sqlservr.exe. You must re-create the database..."
I assume the database files were created with a beta or CTP version of SQL Server 2005. Does anyone know where I can get an updated version of these database files or scripts to update them?
Please help.
Mike.
Enterprise Version Or Standard Version
Mar 18, 2002Can I set up sql server 7.0 standard version in cluster enviorment, what the
different betwent sql server 7.0 enterprise version and standard version? any problem I may encouter when I install the SQL server 7.0 standard version in Cluster enviorment?
Thank you very much.
Judy
Evaluation Version Or Licensed Version
Apr 2, 2008
Hi Guys,
We have a Sqlserver 2005 Installed on One of our servers.I wanted to know whether the installed database is a Evaluation copy or Licensed Copy.How to Evaluate this.
Do we have to check any Log files etc for knowing whether it is evaluation copy or Licensed copy.
Please help me Asap.
thanks in Advance
Regards
Arvind
How To Get SQL Server Info(Version/SP Version/Server Statistics) From A Network.
Jul 23, 2005Does anyone know how to get SQL Server versions, Service pack versionsand the Server that instance of SQL is running on a network. I haveseen some threads on how to list SQL servers in a network but I need tofind more info about these SQL servers.Any help appreciated..!Thx...
View 1 Replies View RelatedCheck If Date Is Current Date And Stay Current
Apr 25, 2008Hi,
I'm making some sort of application where people can add their resume.
They also need something to add places where they have worked or currently are working.
I have a form where they can add this and i add this experience using the following stored procedure:
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
create procedure [dbo].[sp_Insert_Experience]
@ExperienceId uniqueidentifier,
@ExperienceEmployee nvarchar(100),
@ExperienceFrom datetime,
@ExperienceUntil datetime,
@ExperienceQualifications nvarchar(250),
@ExperienceTechnologies nvarchar(250),
@ExperienceTasks nvarchar(250)
as
insert into Experiences
values(@ExperienceId,@ExperienceEmployee,@ExperienceFrom,@ExperienceUntil,@ExperienceQualifications,
@ExperienceTechnologies,@ExperienceTasks);
It must be possible to add the place where they currently are working. Then the ExperienceUntil has to be something like still going on. Then I decided that the user then had to set the current date.
But what I want is the following, I want that the ExperienceUntil keeps updating automatically, like everytime i get that record, it has to have current date.
Is this possible ?
But if the ExperienceUntil isn't the current date , it just had to take the supplied parameter date.
Upgrade From One Version To Another Version
Feb 23, 2007is there a tsql or stored proc to find when was the sqlserver got upgraded from 2000 to sqlserver 2005?
thanks in advance
CTP Version And Release Version
Aug 18, 2006we have a backup of a database from a release version with version number 9.00.1399 and we wanted to restore it to a server with version number (9.00.1116) CTP release. we were issued a version incopatibility message. is it possible to backup from a 9.00.1399 release with a backup file compatible for a CTP release, is there an available option during backup? thanks!
View 3 Replies View RelatedWhat Is Different In The Version I Downloaded This Week From The Version I Downloaded In March?
Jun 17, 2007I ask because I was testing a Source Control solution that uses SQL Express for its database component, and when I tested it in March it worked fine, but now I can't get the Source Control software to recognize that the database is there. It creates it just fine, it just can't seem to look inside the database instance.
I've tried manipulating ports, assigning permissions, browser on, browser off, I've been at this for about a week.
The Source Control software provider won't provide any information on configuring SQL Express, so I'm here.
.MW
Current Row No?
Mar 14, 2007i know there is a function to count number of rows in a group, but is there anyway of numbering each row?
So that I can use =Last(ReportIems("norow") to find the last row on the page????
Thanks
While And Current Value
Apr 18, 2008
I have following query
....
while ( select fieldID from table where age <> 2)
begin
how I can get current value of "fieldID" for future calculations or operations?
like
insert into othertable values (fieldID, .....)
end
Get The Current Year Using SQL
Aug 13, 2004Hi everyone,
Currenly, I'm getting the current year in my code, and passing this to my stored procedure.
I'm sure there's a way just to get the current year (ie '2004') just by using SQL.
I was just about to post this question here when I did a bit more digging around and found my solution:
DATEPART(yyyy, GETDATE())
This will get the year.
Hope this helps someone searching for the answer!
Appending Current Row ID
Dec 19, 2005I am trying to append the current row ID to a string I am trying to
insert via a sproc. I have retrieved the @@Identity and I am passing it
into a class with a parameter and calling it using:
Listings.UpdateDB AddNewListing = new Listings.UpdateDB();
AddNewListing.InsertListing (Bathrooms.Text, Bedrooms.Text,
Description.Text, Features.ToString(), Address.Text, Price.Text, FN);
I would like to add the current row ID to "FN" like:
Listings.UpdateDB AddNewListing = new Listings.UpdateDB();
AddNewListing.InsertListing(Bathrooms.Text, Bedrooms.Text,
Description.Text, Features.ToString(), Address.Text, Price.Text, FN +
ID);
Thanks in advance,
Justin.