I have a Stored Procedure
CREATE PROCEDURE test
AS
BEGIN
SELECT Count(*) FROM dbo.test
END
I can using the unbox get the return value
but if i direct return a value form a Stored Procedure like this
CREATE PROCEDURE test
AS
BEGIN
return 100
END
I can not get the VALUE
I do not know how to
Please Help Me
thx
I have a Stored Procedure
CREATE PROCEDURE test
AS
BEGIN
SELECT Count(*) FROM dbo.test
END
I can using the unbox get the return value
but if i direct return a value form a Stored Procedure like this
CREATE PROCEDURE test
AS
BEGIN
return 100
END
I can not get the VALUE
I do not know how to
Please Help Me
thx
Hello,
I am trying to access the Return Value provided by a stored procedure executed on SQL Server 2005. The stored procedure has already been tested and it returns the required value. However, I do not know how to access this value. I have tried appending a parameter to the command object using "adParamReturnValue" but that only returns an error. The code works fine without appending this parameter. I have tested it by grabbing the recordset and returning the first field.
To avoid any confusion, I'm not talking about adding an "output" parameter to the stored procedure. I just want to be able to access the return value provided when the procedure is executed. Below is some of the code I am using.
try{
pCmd.CreateInstance((__uuidof(Command)));
pCmd->ActiveConnection = m_pConnection;
pCmd->CommandType = adCmdStoredProc;
pCmd->CommandText = _bstr_t("dbo.GetFlightPlan");
............................ code here ........................................
pCmd->Parameters->Append(pCmd->CreateParameter(_bstr_t("AircraftID"),adChar,adParamInput,7,vAcId));
pCmd->Parameters->Append(pCmd->CreateParameter(_bstr_t("DepartureAerodome"),adChar,adParamInput,4,vDepAero));
pCmd->Parameters->Append(pCmd->CreateParameter(_bstr_t("DestinationAerodome"),adChar,adParamInput,4,vDestAero));
pCmd->Parameters->Append(pCmd->CreateParameter(_bstr_t("DepartureHour"),adInteger,adParamInput,2,vDepHour));
pCmd->Parameters->Append(pCmd->CreateParameter(_bstr_t("DepartureMin"),adInteger,adParamInput,2,vDepMin));
VARIANT returnVal;
returnVal.vt = VT_I2;
returnVal.intVal = NULL;
pCmd->Parameters->Append(pCmd->CreateParameter(_bstr_t("RETURNVALUE"),adInteger,adParamReturnValue,sizeof(_variant_t),returnVal));
//Get Return value by executing the command
//The return value should be the DB unique ID.
pCmd->Execute(NULL, NULL, adCmdStoredProc);
int uniqueId = returnVal.intVal;
//pRst = pCmd->Execute(NULL, NULL, adCmdStoredProc);
//GetFieldValue(0,pRst,uniqueId);
printf("The DB unique ID is: %i",uniqueId);
return uniqueId;
}
Cheers,
Seth
I have a stored procedure which returns 3 different kind of values. I am checking whether a certain value entered by user is present in one of the columns of database table. Accordingly the SP returns 1 if present, -1 if not present and third value is SQL server 2005 error.But the problem is that I am only getting -1 everytime even if the value is present.I executed the SP alone to find out if it is the one which is returning the INCORRECT value. I found that that SP is returning the correct value.Therefore I came to the conclusion that it is the Table ADapter which got corrupted.I deleted the TableAdapter and created it again, but then it didn't solve the problem.I have now run out of ideas.
The code of the SP is:ALTER PROCEDURE spcheck_ServerName
(@Server_Name nvarchar(50)
)
ASDECLARE @Result int
IF EXISTS
(
SELECT
NULL
FROMServerDetails WITH (UPDLOCK)
WHERE
[SERVER NAME] = @Server_Name
)
BEGINSELECT @Result = 1
END
ELSE
BEGIN
SELECT @Result = -1
END
IF @@ERROR <> NULL
BEGIN
SELECT @Result = @@ERROR
END
RETURN @Result
And I am calling the tableAdapter method in the code behind file of the web form in the following manner:private int chkServerName(string sname1)
{
try
{Serverlist1TableAdapters.SERVERDETAILSTableAdapter nwAdapter = new Serverlist1TableAdapters.SERVERDETAILSTableAdapter();
int snval = (int)nwAdapter.spcheck_SName(sname1);return snval;
}catch (Exception ex)
{return ex.GetHashCode();
}
}
Any help will be greatly appreciated.
All-
Is there a way that I can embedd a call to a stored procedure into an existing INSERT section in a table adapter?
Say my objective is to call a stored procedure called personfill automatically RIGHT AFTER the TableAdapter inserts a row into the person table. One catch is that the stored procedure must be sent the value of unique identifier field person_id, which was created for the new person record automatically by the db. (If this is not possible to do, I might try using a TRIGGER in the person table.)
Below is the INSERT code of the TableAdapter. My guess is that if I could call a procedure, I would want to put the call between lines 12 and 13.
Your comments would be most appreciated!!!
-Kurt1 <InsertCommand>
2 <DbCommand CommandType="Text" ModifiedByUser="false">
3 <CommandText>INSERT INTO [person] ([family_id], [circle_id], [person_type_id], [last], [first], [username], [password]) VALUES (@family_id, @circle_id, @person_type_id, @last, @first, @username, @password)</CommandText>
4 <Parameters>
5 <Parameter AllowDbNull="false" AutogeneratedName="" DataSourceName="" DbType="Int16" Direction="Input" ParameterName="@family_id" Precision="0" ProviderType="SmallInt" Scale="0" Size="0" SourceColumn="family_id" SourceColumnNullMapping="false" SourceVersion="Current" />
6 <Parameter AllowDbNull="false" AutogeneratedName="" DataSourceName="" DbType="Int16" Direction="Input" ParameterName="@circle_id" Precision="0" ProviderType="SmallInt" Scale="0" Size="0" SourceColumn="circle_id" SourceColumnNullMapping="false" SourceVersion="Current" />
7 <Parameter AllowDbNull="false" AutogeneratedName="" DataSourceName="" DbType="Int16" Direction="Input" ParameterName="@person_type_id" Precision="0" ProviderType="SmallInt" Scale="0" Size="0" SourceColumn="person_type_id" SourceColumnNullMapping="false" SourceVersion="Current" />
8 <Parameter AllowDbNull="false" AutogeneratedName="" DataSourceName="" DbType="AnsiString" Direction="Input" ParameterName="@last" Precision="0" ProviderType="VarChar" Scale="0" Size="0" SourceColumn="last" SourceColumnNullMapping="false" SourceVersion="Current" />
9 <Parameter AllowDbNull="false" AutogeneratedName="" DataSourceName="" DbType="AnsiString" Direction="Input" ParameterName="@first" Precision="0" ProviderType="VarChar" Scale="0" Size="0" SourceColumn="first" SourceColumnNullMapping="false" SourceVersion="Current" />
10 <Parameter AllowDbNull="true" AutogeneratedName="" DataSourceName="" DbType="AnsiString" Direction="Input" ParameterName="@username" Precision="0" ProviderType="VarChar" Scale="0" Size="0" SourceColumn="username" SourceColumnNullMapping="false" SourceVersion="Current" />
11 <Parameter AllowDbNull="true" AutogeneratedName="" DataSourceName="" DbType="AnsiString" Direction="Input" ParameterName="@password" Precision="0" ProviderType="VarChar" Scale="0" Size="0" SourceColumn="password" SourceColumnNullMapping="false" SourceVersion="Current" />
12 </Parameters>
13 </DbCommand>
14 </InsertCommand>
15 <SelectCommand>
16 <DbCommand CommandType="Text" ModifiedByUser="true">
17
I have a package that I have been attempting to return a error code after the stored procedure executes, otherwise the package works great.
I call the stored procedure from a Execute SQL Task (execute Marketing_extract_history_load_test ?, ? OUTPUT)
The sql task rowset is set to NONE. It is a OLEB connection.
I have two parameters mapped:
tablename input varchar 0 (this variable is set earlier in a foreach loop) ADO.
returnvalue output long 1
I set the breakpoint and see the values change, but I have a OnFailure conditon set if it returns a failure. The failure is ignored and the package completes. No quite what I wanted.
The first part of the sp is below and I set the value @i and return.
CREATE procedure [dbo].[Marketing_extract_history_load_TEST]
@table_name varchar(200),
@i int output
as
Why is it not capturing and setting the error and execute my OnFailure code? I have tried setting one of my parameter mappings to returnvalue with no success.
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
Seems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID, S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName', T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID FROM [Item].ItemDetails I INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID FROM [Item].ItemDetails IOr something like that... Any thoughts?
View 3 Replies View RelatedHi, I'm using Reporting Services on my website and for some reports, i get the timeout error after 30 secs.
I declared my object using the Reporting tools and I am using ObjectDataSource.
My report is declared in my aspx page:
<rsweb:reportviewer id="ReportViewer1" runat="server" font-names="Verdana" font-size="8pt" Width="100%" Height="600px">
My ObjectDataSource is declared in my aspx page under my report tag:
<asp:ObjectDataSource ID="ObjectDataSource" runat="server" OldValuesParameterFormatString="original_{0}" SelectMethod="GetData" TypeName="ReportsTableAdapters.ViewingTotalsTableAdapter">
My TableAdapter is declare in my Reports.xsd file:
<TableAdapter BaseClass="System.ComponentModel.Component" DataAccessorModifier="AutoLayout, AnsiClass, Class, Public" DataAccessorName="ViewingTotalsTableAdapter" GeneratorDataComponentClassName="ViewingTotalsTableAdapter" Name="ViewingTotals" UserDataComponentName="ViewingTotalsTableAdapter">
I am trying to access the TableAdapter object from my WebPage Class on the Page_Load event , so I can modify the Command.CommandTimeout. Unfortunately, I cannot find a way to have access to the TableAdater object.
Anyone has any suggestion ?
Thanks,
Richard
I have a stored procedure that selects the unique Name of an item from one table.
SELECT DISTINCT ChainName from Chains
For each ChainName, there exists 0 or more StoreNames in the Stores. I want to return the result of this select as the second field in each row of the result set.
SELECT DISTINCT StoreName FROM Stores WHERE Stores.ChainName = ChainName
Each row of the result set returned by the stored procedure would contain:
ChainName, Array of StoreNames (or comma separated strings or whatever)
How can I code a stored procedure to do this?
I copied my .mdf database from a file and pasted it into the visual studio project App_Data folder.I can see the tables and the columns etc when creating my TableAdapter, and create my sql query etc, but then when I hit the finish button, I get this error "an Unexpected Error has OccuredError Message: Access Denied". Anyone know why I can't create my TableAdapter?
View 7 Replies View RelatedI've got a stored proc to insert a record and return the id of the record inserted in an output param.How do I access this value in my code after the proc is executed?
param = comm.CreateParameter();param.ParameterName = "@MemberID";param.Direction = ParameterDirection.Output;param.DbType = DbType.Int32;comm.Parameters.Add(param);
try{ rowsAffected = GenericDataAccess.ExecuteNonQuery(comm);}catch { rowsAffected = -1;}
Hi guys I know this is a really common question, and I have read loads of replies on it but everything I try does not work. I have written a small stored procedure in SQL server to upload images to a table and return the new ID using scope_identity. I have tested it and it works fine. here it is:******* @siteID numeric(18,0), @imgNum numeric(18,0), @title NVarchar(50), @MIMEtype nchar(10), @imageData varbinary(max)ASBEGINSET NOCOUNT ONdeclare @imageID intINSERT INTO [site_images] ([img_siteID], [img_num], [img_title], [img_MIME], [Img_Data]) VALUES (@siteID, @imgNum, @Title, @MIMEType, @ImageData) SET @imageID = SCOPE_IDENTITY()RETURN @imageIDSET NOCOUNT OFF************If I run this in management studio express it runs fine and returns the ID under 'return value'. The problem I have is trying to actually call that return value in VB. If I try using these lines:Dim returnParam As SqlParameterreturnParam = New SqlParameter("@imageID", SqlDbType.UniqueIdentifier)returnParam.Direction = ParameterDirection.OutputcmdTest.Parameters.Add(returnParam)withcnBKTest.Open()cmdTest.ExecuteNonQuery() imageIDparam = returnParam.value.toStringcnBKTest.Close() I get the error "procedure has too many arguments specified"And if I try to access the return value like this: imageIDparam = cmdTest.Parameters("@return_value").ValueI get the error "@return_value is not contained by this sqlparametercollection" What am I doing wrong? Any help would be greatly appreciated. Robsa
View 3 Replies View RelatedI have written this stored procedure but I get no return value (neither 0 nor 1). What I hope is when the transaction successful, return value 1. If fails, return value 0.1 set @TransactionOk = 0
2
3 BEGIN TRAN
4
5 UPDATE WhiteList_IMEI SET WhiteList_IMEI_Used = 1, Whitelist_IMEI_UsedDate = getdate()
6 WHERE WhiteList_IMEI_Code = @IMEICode_New
7
8 IF @@ERROR <> 0
9 BEGIN
10 ROLLBACK TRAN
11
12 PRINT ('Error. Contact Software Engineer.')
13 RETURN
14 END
15
16 COMMIT TRAN
17 set @TransactionOk = 1
Hi,
I have been trying to this this for quite a while with no joy can someone please tell me the error of my ways. I am trying to add a new record by stored procedure, this I can do, but my problem lies with the returnvalue part of the procedure. I cannot get it to work. When I debug it tells me that the "Specified cast is not valid" see C# code as i comment the line where it errors. I enclose a sample stored procedure and its c# code. Please can someone tell me where I am going wrong? as this is annoying me alot
SQL:create procedure SPUAddVehicleInsert
@VehicleDetailsRegistrationNumber varchar(50),
@VehicleDetailsMake varchar(50),
@VehicleDetailsModel varchar(50),
@NID bigint =null
as
insert into tblvehicledetails
(
VehicleDetailsRegistrationNumber,
VehicleDetailsMake,
VehicleDetailsModel,
)
values
(
@VehicleDetailsRegistrationNumber,
@VehicleDetailsMake,
@VehicleDetailsModel,
);
select @NID = scope_identity();c# code on sqldatasource: protected void dsAddVehicle_Inserted(object sender, SqlDataSourceStatusEventArgs e)
{
Int64 VID = (Int64)e.Command.Parameters["NID"].Value; //errors with specified cast is invalid
Response.Redirect("details.aspx?VID=" + VID.ToString());
}
protected void dsAddVehicle_Inserting(object sender, SqlDataSourceCommandEventArgs e)
{
SqlParameter p = new SqlParameter("NID", SqlDbType.BigInt);
p.Direction= ParameterDirection.ReturnValue;
e.Command.Parameters.Add(p);
}
sql datasource:<asp:SqlDataSource ID="dsAddVehicle" runat="server" ConnectionString="<%$ ConnectionStrings:National %>"
InsertCommand="SPUAddVehicleInsert" InsertCommandType="StoredProcedure" SelectCommand="SPUAddVehicleSelect"
SelectCommandType="StoredProcedure" OnInserted="dsAddVehicle_Inserted" OnInserting="dsAddVehicle_Inserting">
<InsertParameters>
<asp:Parameter Name="VehicleDetailsRegistrationNumber" Type="String" />
<asp:Parameter Name="VehicleDetailsMake" Type="String" />
<asp:Parameter Name="VehicleDetailsModel" Type="String" />
</InsertParameters>
</asp:SqlDataSource>
I have a stored procedure that returns an integer value, declared as:Public Function MyProc(..) As Int32 . . Return <integer>End FunctionI return an integer value, and can do this and get the value returned from the method, as such:declare @rc intexec @rc = dbo.MyProc <params>select @rcThis returns the value; how do I return the value to code and get the value; I've been debugging and that is my problem, I can't get the value to return.Thanks a lot.
View 2 Replies View RelatedHello all of members, I have written a Stored Procedure.that creates a new account and then returns a value witch displays a result to me.if result is 1 "Username already exists" or 2 "E-Mail already exists".I did it with "Return" instruction.But, I don't know how can I get the returned value in ASP.NET(VB.NET)? Please help me. Thanks in advance
View 3 Replies View RelatedHi all,Is there anyway to get a returned value from a called Stored Procedure from within a piece of SQL? For example, I have the following code...DECLARE @testval AS INTSET @testval = EXEC u_checknew_dwi_limits '163'IF (@testval = 0)BEGIN PRINT '0 Returned'ENDELSEBEGIN PRINT '1 Returned'END...which
as you can see calls a SP called 'u_checknew_dwi_limits'. This SP
(u_checknew_dwi_limits) actually returns a value (1 or 0), so I want to
assign that value to the '@testval' variable (as you can see in my
code) - but Query Analyser is throwing an error at me. Is this the
correct way to do this?ThanksTryst
I have a Stored procedure (sql 2000), that inserts data into a table. Then, I add this, at the end: Return Scope_Identity()
I have the parameters for the sProc defined and added to the Command, but I'm having a really lousy time trying to figure out how to get the return value of the Stored PRocedure. BTW - I'm using OleDB instead of SQL due to using a UDL for the connection string.
I have intReturn defined as an integer
I've tried :Dim retValParam As OleDbParameter = cmd.Parameters.Add("@RETURN_VALUE", OleDbType.Integer)retValParam.Direction = ParameterDirection.ReturnValueintReturn=cmd.Parameters("@RETURN_VALUE").Value
whenever I add this section - I get an error that there are too many arguments for the sProc.
I've tried:intreturn=cmd.ExecuteNonquery - tried adding a DataReader - using ExecuteScalar - I've tried so many things and gotten so many errors - I've forgotten which formations go with which errors.
What is the best way to do this in the code part (VB.Net)?
Thanks ahead of time
I don't know whey this code does not return the values when I run it in sql server 2005 manager.set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[usp_usr_Add]
@FName nvarchar(30),
@LName nvarchar(30),
@UserName nvarchar(20),
@Password nvarchar(20),
@Email nvarchar(50),
@Country nvarchar(2),
@AIM nvarchar(10)
AS
SET NOCOUNT ON
BEGIN
DECLARE @usrID int
DECLARE @usrEmail int
SELECT @usrID = NULL
SELECT @usrEmail = NULL
SELECT @usrID = usrID FROM usr WHERE usrName = @UserName
IF (@usrID IS NOT NULL )
BEGIN
RETURN 1
END
SELECT @usrEmail = usrID FROM usr WHERE usrEmail = @Email
IF (@usrEmail IS NOT NULL)
BEGIN
RETURN 2
END
INSERT INTO usr (usrFName, usrLName, usrName, usrPassword, usrEmail, usrCountry, usrAIM, usrJoinDt)
VALUES (@FName, @LName, @UserName, @Password, @Email, @Country, @AIM, GetDate())
RETURN 0
END
When i run this code i executes fine except when the two conditions become true they do not return thier values, nor does it return 0 when it inserts a row.
Hi
I have the following stored procedure which when exectuted within the Query Analyzer adds a record and returns the @SeqRunNo value. However when I call
it in the from ado the record is added but the value is empty.
I enter the parameter as:
.Parameters.Append .CreateParameter("@SeqRunNo", adVarChar, adParamOutput, 4)
and try and access it as:
SeqRunNo = oCommand.Parameters("@SeqRunNo").Value
Any ideas?
Thanks.
john
CREATE PROCEDURE up_mix_Set_Seq_Run_No
@IID int,
@TrackingID int,
@ADP_Code varchar(6),
@ClientID varchar(20),
@SeqRunNo varchar(4) OUTPUT
AS
DECLARE @Max_Seq_No int,
@Seq_No varchar(4),
@LastUpdate datetime
SELECT @Seq_No = QTR_SEQ_RUN_NO FROM Transmission_Quarter
WHERE IID = @IID
AND Tracking_ID = @TrackingID
AND ADP_Code = @ADP_Code
IF ISNULL(@Seq_No,0) = 0
BEGIN
SET @LastUpdate = GETDATE()
SELECT @Max_Seq_No = CAST(MAX(QTR_SEQ_RUN_NO) AS int)
FROM Transmission_Quarter
WHERE IID = @IID
AND ADP_Code = @ADP_Code
IF ISNULL(@Max_Seq_No,0) = 0
BEGIN
SET @SeqRunNo = '0001'
END
ELSE
BEGIN
IF @Max_Seq_No = 9999
BEGIN
SELECT @SeqRunNo = '0001'
END
ELSE
BEGIN
SELECT @SeqRunNo = REPLICATE('0', 4 - DATALENGTH(CAST(@Max_Seq_No AS VARCHAR))) + CAST((@Max_Seq_No + 1) AS VARCHAR)
END
END
INSERT INTO Transmission_Quarter
(IID, Tracking_ID, QTR_SEQ_RUN_NO, ADP_Code, Last_Updated_By, Last_Updated_Date)
VALUES
(@IID, @TrackingID, @SeqRunNo, @ADP_Code, @ClientID, @LastUpdate)
END
ELSE
BEGIN
SELECT @SeqRunNo = @Seq_No
END
GO
How do I get then return value from an insert stored procedure?
for example:
CREATE PROCEDURE sp_ReceiptsInsertc
@Branch_ID int,
@Source varchar(1),
@BatchNo varchar(8),
@Amount money ,
@Iden int OUTPUT
AS
INSERT INTO Receipts(Branch_ID, Source, BatchNo, Amount)
VALUES (@Branch_ID, @Source, @BatchNo, @Amount)
SELECT @Iden=@@Identity
GO
Thanks
How do I get then return value from an insert stored procedure?
for example:
CREATE PROCEDURE sp_ReceiptsInsertc
@Branch_ID int,
@Source varchar(1),
@BatchNo varchar(8),
@Amount money ,
@Iden int OUTPUT
AS
INSERT INTO Receipts(Branch_ID, Source, BatchNo, Amount)
VALUES (@Branch_ID, @Source, @BatchNo, @Amount)
SELECT @Iden=@@Identity
GO
Thanks
Hello Newsgroup !My Tools are:Windows 2000, VBA(Access 2000) and MS SQL Server 7.0I wrote in an *.adp project (Access 2000) a Stored Procedure "xyz"with parameters a,bIn my VBA Code i wrote:Dim par As New ADODB.ParameterCmd.CommandType = adCmdStoredProcCmd.CommandText = "[prcSucheUNRWIAEStichtag]"Set par = Cmd.CreateParameter("@a", adInteger)Cmd.Parameters.Append parSet par = Cmd.CreateParameter("@b", adVarChar, adParamInput, 5)Cmd.Parameters.Append par........Cmd.Parameters(0) = aCmd.Parameters(1) = bSet rsTemp = Cmd.ExecuteNow my Problem is the following:there is an error in the stored procedure and i want to use something likethis:if @idontknow = '000000000'Beginreturn(1) -- Something <>0endHow can i use this return value in my VBA code ? Maybe i should ask thisquestion in an other Newsgroup. Pleaselet me know in which oneGreetingsFrank
View 2 Replies View RelatedIn one of my SSIS jobs I have an 'Execute SQL Task' which is calling a stored procedure. This SP returns 0 or 1, if the SP returns 1 the package needs to stop executing. Is there a way to get the value that is returned from the SP and either continue or stop the job from continuing to run?
so if value is 0 it goes to the next step, if its 1 it stops running
Greetings All,
I am a newbie to SSIS and need some help. I need to get the return value from a stored procedure into a SSIS variable. I'm assuming I would use an OLE DB Command but I havn't a clue on how to capture the return value. Can someone get me started on how I can do this?
Note, the return value is actually an identity of the inserted value. I need this value in my data flow for further processing.
Thanks is advance!
I am have stored procedure that accepts one parameter and returns a single value
The sp works fine.
My question is how do I set the c# webpage to return the single value.
I need a specific example of how to code.
this is how the code should work.
A blank form is loaded, when the user clicks submit I need the code to pull the Login name from the text box and check to see if it exist. I have the sp working the way I need it to. But I can figure how to pull the single value into a variable in the code behind.
I am using dataset elsewhere on the site, so I created a ds the calls the sp. Can it work this way?
thanks,
Hi AllHere is my SPALTER PROCEDURE dbo.InsertPagerDays @ReportEndDate datetime, @PagerDays int,@UserID varchar(25)ASIF EXISTS(-- you cannot add a pager days more than once per report dateSELECT ReportEndDate, UserId from ReportPagerDays where ReportEndDate = @ReportEndDate and UserId = @UserID)Return 1 elseSET NOCOUNT OFF;INSERT INTO [ReportPagerDays] ([ReportEndDate], [PagerDays], [UserID]) VALUES (@ReportEndDate, @PagerDays, @UserID)RETURNMy Question is, this SP will not let you enter in a value more than once (which is what i want) but how do I write my code to inform the user? Here is my VB code becuase the SP does not error out (becuase it works it acts as if the record updates)How can I catch the Return 1'set parameters for SPDim cmdcommand = New SqlCommand("InsertPagerDays", conn)cmdcommand.commandtype = CommandType.StoredProcedurecmdcommand.parameters.add("@ReportEndDate", rpEndDate)cmdcommand.parameters.add("@PagerDays", PagerDays)cmdcommand.parameters.add("@UserId", strUserName)Try'open connection hereconn.Open()'Execute stored proccmdcommand.ExecuteNonQuery()Catch ex As Exceptionerrstr = ""'An exception occured during processing.'Print message to log file.errstr = "Exception: " & ex.Messagelblstatus.ForeColor = Drawing.Color.Redlblstatus.Text = "Exception: " & ex.Message'MsgBox(errstr, MsgBoxStyle.Information, "Set User Report Dates")FinallyIf errstr = "" Thenlblstatus.ForeColor = Drawing.Color.Whitelblstatus.Text = "Pager Days Successfully Added!"End If'close the connection immediatelyconn.Close()End Try
View 1 Replies View RelatedI have the following stored procedure for SQL Server 2000: SELECT a.firstName, a.lastName, a.emailfrom tbluseraccount ainner join tblUserRoles U on u.userid = a.useridand u.roleid = 'projLead' Now, this is not returning anything for my dataset. What needs to be added?Here is the code behind:Dim DS As New DataSetDim sqlAdpt As New SqlDataAdapterDim conn As SqlConnection = New SqlConnection(DBconn.CONN_STRING)Dim Command As SqlCommand = New SqlCommand("myStoredProcdureName", conn)Command.CommandType = CommandType.StoredProcedureCommand.Connection = connsqlAdpt.SelectCommand = CommandsqlAdpt.Fill(DS) Then I should have the dataset, but it's empty.Thanks all,Zath
View 5 Replies View RelatedThis is my SP:SELECT CAST(id AS varchar(10)) + ' - ' + UserName AS 'User List', Scanned, Scripts AS 'Total Scripts', Processed,CAST((Processed/ Scripts)* 100.0 as int) AS 'DONE (%)'FROM tblworkQueueProcessed and Scripts are both DataTypes of intMy DONE(%) column comes back with 0Any idea where I am going wrong?
View 2 Replies View RelatedI'm attempting to return a value from my stored procedure. Here is my button click event that runs the stored procedure. protected void btn_Move_Click(object sender, EventArgs e)
{
/*variables need for the update of the old staff record
and the creation of the new staff record.
*/
BMSUser bmsUser = (BMSUser)Session["bmsUser"];
int staffid = Convert.ToInt32(bmsUser.CmsStaffID);
int oldStaffProfileID = Convert.ToInt32(Request.QueryString["profileid"]);
string newManager = Convert.ToString(RadComboBox_MangersbyOrg.Text);
int newMangerProfileID = Convert.ToInt32(RadComboBox_MangersbyOrg.Value);
SqlConnection conn = new SqlConnection(connect);
SqlCommand cmd = new SqlCommand();
cmd.Connection = conn;
cmd.CommandType = CommandType.StoredProcedure;
cmd.CommandText = "sp_BMS_MoveStaffMember";
cmd.Parameters.Add("@OldStaffProfileID", SqlDbType.Int);
cmd.Parameters["@OldStaffProfileID"].Precision = 9;
cmd.Parameters["@OldStaffProfileID"].Scale = 0;
cmd.Parameters["@OldStaffProfileID"].Value = oldStaffProfileID;
cmd.Parameters.Add("@NewManagerProfileID", SqlDbType.Int);
cmd.Parameters["@NewManagerProfileID"].Precision = 9;
cmd.Parameters["@NewManagerProfileID"].Scale = 0;
cmd.Parameters["@NewManagerProfileID"].Value = newMangerProfileID;
cmd.Parameters.Add("@LastModifiedBy", SqlDbType.Int);
cmd.Parameters["@LastModifiedBy"].Precision = 9;
cmd.Parameters["@LastModifiedBy"].Scale = 0;
cmd.Parameters["@LastModifiedBy"].Value = staffid;
SqlParameter sp = new SqlParameter("@OLDManagerReturn", SqlDbType.Int);
sp.Direction = ParameterDirection.Output;
cmd.Parameters.Add(sp);
lbl_ERROR.Text = Convert.ToString(sp);
conn.Open();
SqlTransaction trans = conn.BeginTransaction();
cmd.Transaction = trans;
cmd.ExecuteNonQuery();
conn.Close();
My parameter sp is coming back null for some reason. Am I not setting the parameter correctly? I set a break point and it says the value is null.
Here is the parts of my stored proc returning the value...
DECLARE @OLDManagerReturn numeric(9)
SELECT @OLDManagerReturn = ManagerProfileID FROM tblBMS_Staff_rel_Staff WHERE StaffProfileID = @OldStaffProfileID AND Active=1 AND BudgetYear = @BudgetYear
RETURN @OLDManagerReturn
Hello there,
I searched for answers to the above topic, but could not find what I want. My stored procedures and triggers are returning a message based on the result, mostly error messages. How can I get that message using ASP.Net? Should I use an output parameter?
Thank you for your help.
Hi, nice to meet you all. I'm new developer and need help. Normally i use "sqldatasource1.select()", but need to fill argument, what is argument? Actually the main point i wan to return a value from stored procedure or got any methods can do this way? Hope you all can help me.... Thank
View 4 Replies View Related