How To Go About Adding Similar Tables?
May 26, 2007
I have a table that I am basically reduplicating a couple of times for each part of this database that I want to create.
Each table basically has the same data: The tables will be called motherTable, fatherTable, sonTable, daughterTable and so on.
I am pretty much using the following in each column: UserID, MotherID(or FatherID or SonID, etc., etc. and so on for each unique table), FirstName, LastName, MiddleName, BirthPlace, Photo, Age.
I don't see an option to copy a table and just modify the second ID part and rename that table accordingly.
How can I make this an easier way of creating these similar tables without retyping all these columns over and over again?
Thanks in advance.
View 5 Replies
ADVERTISEMENT
May 26, 2007
I have a table that I am basically reduplicating a couple of times for each part of this database that I want to create.Each table basically has the same data: The tables will be called motherTable, fatherTable, sonTable, daughterTable and so on.I am pretty much using the following in each column: UserID, MotherID(or FatherID or SonID, etc., etc. and so on for each unique table), FirstName, LastName, MiddleName, BirthPlace, Photo, Age.I don't see an option to copy a table and just modify the second ID part and rename that table accordingly.How can I make this an easier way of creating these similar tables without retyping all these columns over and over again?Thanks in advance.
View 4 Replies
View Related
Dec 13, 2004
Folks, i have to create four fields in every user table within my database:
CREATED_BY VARCHAR(25), CREATED_DATE [DATETIME], MODIFIED_BY VARCHAR(25), MODIFIED_DATE [DATETIME]
There are more than hundred tables, so i wanna automate this. i am tryin to do this in a cursor: please guide!
declare @name VARCHAR (50)
declare cur cursor
fast_forward
for select name from sysobjects where type='u' and status not like '-%'
open cur
WHILE (1=1)
BEGIN
FETCH NEXT
FROM cur
INTO @name
IF @@fetch_status = 0
BEGIN
ALTER TABLE @name
ADD created_by [VARCHAR] (25)
GO
ALTER TABLE @name
ADD created_by [VARCHAR] (25)
GO
ALTER TABLE @name
ADD created_date [DATETIME]
GO
ALTER TABLE @name
ADD modified_by [VARCHAR] (25)
GO
ALTER TABLE @name
ADD modified_date [DATETIME]
END
ELSE
BREAK
END
DEALLOCATE cur
I also want that if one column for a table exists; the other columns should be created rather than it quits.
Howdy!
View 4 Replies
View Related
Jan 3, 2014
For every table in my database there is a duplicate table with same columns. For example, employee is the name of main table, there is employee_dup table in same database.
There is only one column extra in _dup tables i.e.,idn column.
Now, I want to know all the columns present in main table which are not present in corresponding _dup table. There might be a chance of missing one or two columns in _dup tables. So i want a query to find out all the columns present in main table that are not present in hx table.
View 6 Replies
View Related
Mar 5, 2014
I am trying to write an SQL command for my crystal report. I need to compare the same column in 3different tables & get the data from each table for only the matching data.. I understand I need to create a temporary table, get the data into it & then work around.. I am quite new to SQL.
Eg: Considering one customer account
Table 1
Cust.No Name Amt_Counter AmtPaid
123.456 sam 0 0
123.456 sam 1 50
Table 2
Cust.No Name Freq_Counter Frequency
123.456 sam 1 0
123.456 sam 2 15
[code]....
View 3 Replies
View Related
Dec 10, 2013
I am using this query to search checkbox values.
SqlCommand cmd = new SqlCommand("Select * from Details where Emp_Code in (" + selectedValues + ")", con);
I want to join a table called Materials to this now. Material table also has an Emp_Code column. How can I write a select sql query to fetch Emp_Code from both Details and Materials table.
SqlCommand cmd = new SqlCommand("select D.Emp_Code, M.Emp_Code from Details D, Materials M where D.Emp_Code = M.Emp_Code in (" + selectedValues + ")", con);
View 2 Replies
View Related
Jan 3, 2014
For every table in my database there is a duplicate table with same columns. For example, employee is the name of main table, there is employee_dup table in same database.
There is only one column extra in _dup tables i.e.,idn column.
Now, I want to know all the columns present in main table which are not present in corresponding _dup table. There might be a chance of missing one or two columns in _dup tables. So i want a query to find out all the columns present in main table that are not present in hx table.
View 5 Replies
View Related
Jul 23, 2005
I have two tables in the same SQL database. Both have a similar numericfield. One field has the same number as the other field but is prefixedwith various letters. I know how to use LIKE but won't know the partialstring I am looking for. I am trying to use LIKE '%' + Field A orsomething that will do this.Eg.Table 1 Field A is 'A12345"Table 2 Field B is '12345"I want to find every record in Table 1 Field A that contains the exactField B data.*** Sent via Developersdex http://www.developersdex.com ***
View 3 Replies
View Related
Sep 28, 2015
What I am working with unfortunately is a very poorly designed and non-normalized database. Please don't criticize the design. I didn't design it, but I have to write queries against it.I have 2 tables. 1 is called EnterVolume. The other is ExitVolume. Similar columns exist in each.
CREATE TABLE [EventPortion].[EventEnterVolume](
[SequenceNumber] [int] NULL,
[TrialID] [nvarchar](255) NULL,
[TimeOfEvent] [int] NULL,
[UniversalTime] [nvarchar](255) NULL,
[SBOINumber] [int] NULL,
[SEntityPosUpdateIndex] [int] NULL,
[VolumeIndex] [int] NULL,
[code]....
The rules of the database state that for every EnterVolume row (for a given TrialID, SBOINumber, and OwnerBOI) there must be a corresponding ExitVolume row in the ExitVolume table.What I need to do is to capture the paired TimeOfEvent entries from each table for each paired row. Nothing says that an SBOI cannot enter and exit a OwnerBOI's volume several times during the same Trial.Every time a SBOI Enters an OwnerBOI's volume during a certain trial, a row is created in the EnterVolume table. And Likewise when Exiting a OwnerBOI's volume during a certain trial, a row is created in the ExitVolume table.
So here is a query that I attempted, but gave undesirable results:
SELECT EV.TimeOfEvent AS [Enter Time], XV.TimeOfEvent AS ExitTime
FROM IntegratedTest1.EventPortion.EventEnterVolume AS EV INNER JOIN
IntegratedTest1.EventPortion.EventExitVolume AS XV ON EV.TrialID = XV.TrialID AND EV.SBOINumber = XV.SBOINumber AND EV.OwnerBOI = XV.OwnerBOI
Here is some sample data:
EnterVolume
TrialID SBOI OwnerBOI TimeOfEvent
1 A D 5
1 A D 2000
[code]....
View 8 Replies
View Related
Jul 23, 2005
Hi,I m searching for some Script / Function ... to find difference in datab/w 2 similar tables (exactly same fields structure) in sql 2000.plz update me asap !thanks in advance !
View 2 Replies
View Related
May 19, 2008
I am using SQL 2005 merge replication with a publisher managing about 45 articles(tables) with about 10 subscribers (remote servers). The problem is that we had to re-start replication from scratch and noticed that, although the publisher's tables have the default values, the subscribers did not get the default values with the initial snap shot, schema building..?!?
I now have to go over 450 tables (10 remotes SQl servers at 45 tables each) and 'reset or set' over 1,000 default values. Meanwhile, the system is down...omg...so not good.
Is there a script out there that automatically extracts the default values from a table and set it to another exact table with the same structure? any ideas?
Thanks..CF
btw, i'm no scripting wizard....help!.
View 1 Replies
View Related
Jul 20, 2005
I have two tables in my database called CartItems and OrderItems. Istore all of a session's shopping cart items in the CartItems tableusing the sessionID as the identifier (called cartID in my DB). Afteran order is placed and is approved, I would like to copy all of theitems in the CartItems table for that given cartID to the OrderItemstable given a new orderID.I will know the cartID and orderID ahead of time and would like tosend them both into a stored procedure and have the transfer takeplace.Example:take this data...CartItems (table)--------------------------------------cartID | itemID | quantity | price--------------------------------------12345 2 1 12.9512345 7 2 17.95and make it this data...OrderItems (table)--------------------------------------orderID | itemID | quantity | price--------------------------------------00001 2 1 12.9500001 7 2 17.95via some stored procedure that I send (@cartID,@orderID)Any help would be greatly appreciated!!
View 5 Replies
View Related
Sep 30, 2007
It seems that there should be a solution for my situation, but for the life of me I can't seem to figure it out.
I need to compare two "like" tables, containing similar data. Tbl 1 is "BOOKED" (which is a snapshot of inventory) and tbl 2 is "CURRENT" (the live - working inventory table). If I write my query as follows the the subsequent result is "duplicate" data.
Code Block
SELECT booked.item, booked.bin, booked.quantity, current.bin, current.quantity
FROM BOOKED
LEFT JOIN
CURRENT
ON booked.item = current.item
No matter what type of join I use, there is duplicate data displayed for each table. For example, if there are more bins in the BOOKED table that contain a certain product then the CURRENT table will repeat data and vica versa.
As follows:
Item
Bin
Quantity
Bin
Quantity
12345
A01
500
A01
7680
12345
B01
6
A01
7680
12345
C01
20
A01
7680
54321
G10
1032
E15
1163
54321
G10
1032
F20
523
54321
G10
1032
H30
750
98765
Z20
7000
Z20
8500
98765
Y15
2500
Y15
3000
98765
X10
1200
Y15
3000
What I would like to do is display Bin and Quantity only once and the repeating values as NULL or [BLANK]. Or, to display all of the bins from both tables and only the quantities from each table in relation to the bin found in that table, returning a "0" if no quantity exists.
This is what I'm after:
Item
Bin
Quantity
Bin
Quantity
12345
A01
500
A01
7680
12345
B01
6
B01
0
12345
C01
20
C01
0
54321
G10
1032
E15
1163
54321
F20
0
F20
523
54321
H30
0
H30
750
98765
Z20
7000
Z20
8500
98765
Y15
2500
Y15
3000
98765
X10
1200
X10
0
Is this possible? If so, how?
I also might add that it is ok for each table to contain multiple entries for any given item. This is basically being requested as an inventory variance report - inventory before physical count and immediatly after physical count - and will only be run once a year.
-----------------------------------------------
Just thinking out loud here:
What if I created three subqueries, the first containing only BOOKED information, the second containing only CURRENT information and the third being a UNION of both tables? Something like this:
Code Block
SELECT q3.bin, q1.item, ISNULL(q1.quantity, 0) as QTY_BEFORE, ISNULL(q2.quantity, 0) as QTY_AFTER
FROM
(select item, bin, quantity
from BOOKED)q1
Left Join
(select item, bin, quantity
from CURRENT)q2
on q1.item = q2.item
Left Join
(select bin, item
from BOOKED
UNION
CURRENT)q3
on q1.item = q3.item
Order By q1.item
I don't know if I wrote the UNION statement correctly, but I will have to try this when I get back to work...
Any suggestions?
View 7 Replies
View Related
Apr 19, 2007
Hi Everyone,
I have a page with a textbox and a dropdown list. The user will enter a company name in the text box and select a number from 1 - 20 (number of delegates for that company) in the dropdown list.
I've got the text box and dropdown writing to tblCompany but I would also like it to write to tblUsers at the same time. The reason for this is that i need it to set up the number of users that have been selected in the dropdown list.
Here is the codebehind file:Imports System.Data.SqlClient
Imports System.Web.Configuration
Partial Class cms_Management_Company_NewCompany
Inherits System.Web.UI.Page
Dim companyName As String
Dim companyActive As Boolean
Dim companyArchived As Boolean
Dim companyDelegates As Integer
Dim userForeName As String
Dim userSurname As String
Dim userEmail As String
Dim userUsername As String
Dim userPassword As String
Dim userActive As Boolean
Dim userTypeID As Integer
Dim companyID As Integer
Dim i As Integer
Dim NoLoops As Integer
Protected Sub btnSave_Click(ByVal sender As Object, ByVal e As System.Web.UI.ImageClickEventArgs) Handles btnSave.Click
Dim conString As String = WebConfigurationManager.ConnectionStrings("General").ConnectionString
Dim con As New SqlConnection(conString)
Dim cmd As New SqlCommand("INSERT INTO tblCompany (CompanyName, CompanyActive, CompanyArchived, CompanyDelegates) VALUES (@CompanyName, @CompanyActive, @CompanyArchived, @CompanyDelegates)", con)
cmd.Parameters.AddWithValue("@CompanyName", companyName)
cmd.Parameters.Item("@CompanyName").Value = txtCompanyName.Text
cmd.Parameters.AddWithValue("@CompanyDelegates", companyDelegates)
cmd.Parameters.Item("@CompanyDelegates").Value = lstDel.SelectedValue
cmd.Parameters.AddWithValue("@CompanyActive", companyActive)
cmd.Parameters.Item("@CompanyActive").Value = True
cmd.Parameters.AddWithValue("@CompanyArchived", companyArchived)
cmd.Parameters.Item("@CompanyArchived").Value = False
Using con
con.Open()
cmd.ExecuteNonQuery()
con.Close()
End Using
Dim con2 As New SqlConnection(conString)
Dim cmd2 As New SqlCommand("INSERT INTO tblUsers (UserForeName, UserSurname, UserEmail, UserUsername, UserPassword, UserActive, UserTypeID, CompanyID) VALUES (@UserForeName, @UserSurname, @UserEmail, @UserUsername, @UserPassword, @UserActive, @UserTypeID, @CompanyID)", con2)
cmd2.Parameters.AddWithValue("@UserForeName", userForeName)
cmd2.Parameters.Item("@UserForeName").Value = "First Name - Delegate 1"
cmd2.Parameters.AddWithValue("@UserSurname", userSurname)
cmd2.Parameters.Item("@UserSurname").Value = "Surname - Delegate 1"
cmd2.Parameters.AddWithValue("@UserEmail", userEmail)
cmd2.Parameters.Item("@UserEmail").Value = "Email Address - Delegate 1"
cmd2.Parameters.AddWithValue("@UserUsername", userUsername)
cmd2.Parameters.Item("@UserUsername").Value = "Username - Delegate 1"
cmd2.Parameters.AddWithValue("@UserPassword", userPassword)
cmd2.Parameters.Item("@UserPassword").Value = "Password - Delegate 1"
cmd2.Parameters.AddWithValue("@UserActive", userActive)
cmd2.Parameters.Item("@UserActive").Value = True
cmd2.Parameters.AddWithValue("@UserTypeID", userTypeID)
cmd2.Parameters.Item("@UserTypeID").Value = 2
cmd2.Parameters.AddWithValue("@UserTypeID", userTypeID)
cmd2.Parameters.Item("@UserTypeID").Value = 1
Using con2
con2.Open()
For i = 1 To NoLoops
cmd2.ExecuteNonQuery()
Next i
con2.Close()
End Using
Response.Redirect("~/cms/Management/Company/Company.aspx")
End Sub
End ClassThe other thing I am not sure of is getting the ID of the new company and assiging it to the delegates in tblUsers (to associate them with the new company)I hope this makes sense.Thank you very much guys.Scott.
View 2 Replies
View Related
Feb 15, 2007
Hello all, i have 2 sql tables, and they each contain a column with bigint values. What i want to do is add up the values from both table, and then display it as 1 number. Supposing i have the following
table name: DownloadTable
fileName | DownloadSize |
file1 | 45
file2 | 50
file3 | 20
---------------------------------------------
second table
table name: VideoTable
fileName | VideoSize |
file1 | 40
file2 | 60
file3 | 20
----------------------------------------
Now, i want this to output 120, wich is the sum of the sum of the values of table 1 and 2 I've already tried the following:
SELECT SUM(DownloadTable.DownloadSize) + SUM(VideoTable.VideoSize) FROM DownloadTable, VideoTable
However, when i ran this, it gave me a huge number, that was far from accurate from what it was suppose to output. Can anyone help me?
Thanks in advance
Regards,
View 8 Replies
View Related
Mar 6, 2014
I'm currently in an SQL internship, and am running into an issue with a project they've given me. Primarily, he's asking me to try to get a table containing student entry testing information to update with a new column that's supposed to contain the testing dates. This in mind, there is another table that contains testing data, and who's students are grouped by date, the data in each group all coming from the students table. Issue is, I don't know how to get the testing dates from the TestData table into the Students table. There's already a relationship set up between the TestID fields on the TestData table (PK) and the Students table (FK), so I don't think I can set up a new relationship to get it working.
View 1 Replies
View Related
Jul 5, 2005
I'm using net2.0 and SQL server express locally and have succeseffully placed my connection string in my sebconfig file and made connection and grids and detail etc, etc. Now I want to publish what I've done. So I got a free account at maximumasp beta 2.0. They give some room on a sql 2000 server and a empty database. Now I want to add the Northwind table to that DB but I don't have Enterprise manager and have no idea how to add the tables.Can someone please help?Thanks!Rich
View 3 Replies
View Related
Oct 27, 2000
Can I add a description to a table or field? The way access gives you to add a description to a field.
Thanks!
View 1 Replies
View Related
Jul 20, 2005
Hi, I'm trying to add a modified datetime and userid to all 72 tables in mySQL 2000 database. I have the script to do one table, and a cursor, but itwon't run across all tables. Any help would be appreciated. Thanks...DECLARE @tName varchar(40)DECLARE C1 CURSOR FORselect name from sysobjects where type = 'U'OPEN C1FETCH NEXT FROM C1 INTO @tName-- Check @@FETCH_STATUS to see if there are any more rows to fetchWHILE @@FETCH_STATUS = 0BEGIN-- This is executed as long as the previous fetch succeedsBEGIN TRANSACTIONSET QUOTED_IDENTIFIER ONSET TRANSACTION ISOLATION LEVEL SERIALIZABLESET ARITHABORT ONSET NUMERIC_ROUNDABORT OFFSET CONCAT_NULL_YIELDS_NULL ONSET ANSI_NULLS ONSET ANSI_PADDING ONSET ANSI_WARNINGS ONCOMMITBEGIN TRANSACTIONALTER TABLE @tName ADDModifiedDT datetime NULL,ModifiedUserID int NULLGOCOMMITFETCH NEXT FROM C1ENDCLOSE C1DEALLOCATE C1GO
View 3 Replies
View Related
Jan 5, 2007
I keep product name, id in Table1.
I keep Category name, id in Table2.
I keep relation between product and category (product_id, category_id) in Table3.
I have added some products to the table with proper category.
Work fine
But for some products I did not specified any category
(ie their id is not present in Table3)
But now I want all such products
(ie all products whose category is nothing)
To be associated with category_id 10
Can I do this simply with SQL queries?
Hope u can help me
sujith
View 4 Replies
View Related
Oct 10, 2013
I have two tables a and b, where I want to add columns from b to a with a criteria. the columns will be added by month criteria. I want to keep all the records in a, and join columns from b. I do not want to loose any row from a if there is no data for that row in b.
I do not know how to have the multiple joins for 12 different months and what join I have to use. I used left join but still I am loosing not all but few rows in a:
/****** Script for SelectTopNRows command from SSMS ******/
SELECT a.[naics]
,a.[ust_code]
,a.[port]
,a.[all_qty_1_yr]
,a.[all_qty_2_yr]
,a.[all_val_yr]
[Code] ....
View 6 Replies
View Related
Jul 12, 2004
Hi
I keep reading it's possible to add, amend ,etc. tables in visual studio but to do so I need access to the features that allow this.
I can connect to the database but I haven't been able to use any of these database features since they are "blanked" out.
Obviously, I can do all this at the server but ideally I would like to do it remotely.
Any suggestions?
Thanks in advance.
View 2 Replies
View Related
Jun 13, 2000
I have used the following script to add the size of chosen tables in all the databases on a given server. What I need to do is to create a GRAND total. Can someone give me a hint?
exec sp_msforeachdb
@Command1 = "print'?'",
@Command2 = "use ?
SELECT CAST (o.name as char(20)) as 'Table', SUM(c.length) 'Record size',
MAX (i.rows) '#of rows',
CONVERT (decimal (10, 4), SUM (c.length * i.rows)/(1024.00 * 1024.00)) 'Approx. size (MB)'
FROM sysobjects o, syscolumns c, sysindexes i
WHERE o.id = c.id
AND o.id = i.id
AND (i.indid = 1 or i.indid = 0)
AND o.type = 'U'
And o.name in ('Table1','Table2','Table3')
GROUP BY o.name
COMPUTE SUM (CONVERT (decimal (10,4), SUM (c.length * i.rows)/(1024.00 * 1024.00)))"
Thank you
View 1 Replies
View Related
Apr 10, 2008
Hey Gurus,
I have a problem on getting the sql statement which will group similar column name and sum their number together(another column).
A million thanks in advance.
View 5 Replies
View Related
Oct 2, 2015
When adding/removing tables in SSMS 2016 CTP2, I keep tripping into:
Index was outside the bounds of the Array
When editing a SQL Server 2014 Database.
If I use the SSMS for SQL 2014, the error is not happening. Possibly a reintroduced bug. Tried to use the Connect site to submit, but it says I am not enabled to use this area.
View 3 Replies
View Related
Sep 7, 2007
Hi, i'm trying to do a full text search on my site to add a weighting score to my results. I have the following database structure:
Documents: - DocumentID (int, PK) - Title (varchar) - Content (text) - CategoryID (int, FK)
Categories: - CategoryID (int, PK) - CategoryName (varchar)
I need to create a full text index which searches the Title, Content and CategoryName fields. I figured since i needed to search the CategoryName field i would create an indexed view. I tried to execute the following query:
CREATE VIEW vw_DocumentsWITH SCHEMABINDING ASSELECT dbo.Documents.DocumentID, dbo.Documents.Title, dbo.Documents.[Content], dbo.Documents.CategoryID, dbo.Categories.CategoryNameFROM dbo.Categories INNER JOIN dbo.Documents ON dbo.Categories.CategoryID = dbo.Documents.CategoryID
GOCREATE UNIQUE CLUSTERED INDEX vw_DocumentsIndexON vw_Documents(DocumentID)
But this gave me the error:
Cannot create index on view 'dbname.dbo.vw_Documents'. It contains text, ntext, image or xml columns.
I tried converting the Content to a varchar(max) within my view but it still didn't like.
Appreciate if someone can tell me how this can be done as surely what i'm trying to do is not ground breaking.
View 2 Replies
View Related
Sep 3, 2015
Is there any way or option to get the all columns of dataset added to table when we add a table in data region. It will take lot of time to add one by one and also there are chances to add one column ore than once.
View 7 Replies
View Related
Apr 11, 2005
Is there any program similar to phpMyAdmin for MS SQL servers?
Thanks in advance
View 5 Replies
View Related
May 11, 2006
I have a function that uses the following statement in it
SELECT src_terrier.Areacode, src_terrier.siteref, src_terrier.estatename, src_terrier.Securitised, src_terrier.unitref, src_terrier.unittype,
src_terrier.unittype_count, src_terrier.tenantname, src_terrier.tenantstatus, src_terrier.tenantstatus_count, src_terrier.unitstatus,
src_terrier.unitstatus_count, src_terrier.floortotal, src_terrier.floortotocc, src_terrier.initialvacarea, src_terrier.initialvacnet, src_terrier.TotalRent,
src_terrier.NetRent, src_terrier.FinalRtLsincSC, src_terrier.ErvTot, src_terrier.tenancyterm, src_terrier.landact, src_terrier.datadate,
src_div_mgr.div_mgr, src_portfolio_mgr.portfolio_mgr, src_centre_list.propcat, src_tbl_rental.budgeted_net_rent,
src_tbl_rental.budgeted_occupancy
FROM src_terrier INNER JOIN
src_centre_list ON src_terrier.siteref = src_centre_list.Site_Ref AND src_terrier.Areacode = src_centre_list.Division INNER JOIN
src_div_mgr ON src_centre_list.Division = src_div_mgr.division INNER JOIN
src_portfolio_mgr ON src_centre_list.Portfolio_no = src_portfolio_mgr.portfolio_no LEFT OUTER JOIN
src_tbl_rental ON src_terrier.siteref = src_tbl_rental.site_ref
WHERE (src_terrier.datadate = @dt_src_date) AND
(src_terrier.Areacode = @chr_div) AND
(src_centre_list.Portfolio_no = @vch_portfolio_no) AND
(src_centre_list.propcat = @vch_prop_cat) AND
(src_tbl_rental.site_ref = src_terrier.siteref)
The problem I have is that the 'src_terrier.datadate' is passed through as mm/dd/yyyy (which I do actually want to change to dd/mm/yyyy as that is how the data is stored) however, the src_date within the table src_tbl_rental is only set to 01/mm/yyyy. When I put an inner join on the date element it obviously does not find it as the sample data I am using is as follows
src_terrier = 28/04/2006 and src_tbl_rental is 01/04/2006. Therefore if I pass the same parameter value through the dates are not the same and I get no data at all.
How can I specify that for the purposes of the src_tbl_rental element of the select query, that I only want it to match the mm/yyyy part of the src_date.
Therefore if some passes in
28/04.2006 it will get the records from the terrier table that match that date, and only the records from rental that match the 04/2006 part of the date.
Anybody confused by that , cause I am!
Regards
View 6 Replies
View Related
Apr 28, 2008
hello there.
is there any case for getting the directory/file structure on the ReportServer?
something similar to "DirectoryInfo".
i'm using the webservice
best would be putting the url (e.g. "http://localhos/reportserver/reportgroup1") to a function and get at least an array of filenames in this folder back.
is there any way to solve this?
thanks in advance, tobias
View 1 Replies
View Related
Sep 11, 2007
Hi!
I'm about to write some code that generate TSQLdoc.
For that I would like to show dependencies.
What will the best way to get actual info about
which procedures use this proc
which procedures or functions do this proc or func use?
Thanks
View 2 Replies
View Related
Oct 6, 2005
I'm constructing a single string of several counts with concatenated labels using SQL and want to not show zeros (or their labels). Is there a function within an SQL statement that will let me do this? ISNULL() sort of does this, but I really need to test for zero instead of NULL to eliminate noise data from the string.
View 2 Replies
View Related
Dec 13, 2007
Is there anything similar to AWR/statspack report in SQL Server 2005.
View 4 Replies
View Related
