Hi,
I have a table with one field set at nvarchar (4000)
This is sometimes not big enough and I get an error that the max row size has been reached.
How do people handle the error when the max row size is reached and gracefully inform the user?
Also, should I really be using Ntext instead, would this be better - is there a performance penalty?
Much obliged.
RG
Hi everyone,
Kindly tell me the size of database that SQL Express can handle.
Tks for your cooperation.
Brgds,
Adien
I am trying to resize a database initial log file from 500M to 2M. I€™m using€?
ALTER DATABASE <DBNAME> MODIFY FILE ( NAME = <DBLOGFILENAME, SIZE = 2 ) "
And I'm getting "MODIFY FILE failed. Specified size is less than current size." I tried going into the database properties and setting the log file to 2M, but it doesn€™t keep the changes.
Any help with this process?
Hi
I'm using service broker and keep getting errors in the log even though everythig is working as expected
SQL Server 2005
Two databases
Two end points - 1 in each database
Two stored procedures:
SP1 is activated when a message enters the sending queue. it insert a new row in a table
SP2 is activated when a response is sent from the receiving queue. it cleans up the sending queue.
I have a table with an update trigger
In that trigger, if the updted row meets a certain condition a dialogue is created and a message is sent to the sending queue.
I know that SP1 and SP2 are behaving properly because i get the expected result.
Sp1 is inserteding the expected data in the table
SP2 is cleaning up the sending queue.
In the Sql Server log however i'm getting errors on both of the stored procs.
error #1
The activated proc <SP 1 Name> running on queue Applications.dbo.ffreceiverQueue output the following: 'The conversation handle is missing. Specify a conversation handle.'
error #2
The activated proc <SP 2 Name> running on queue ADAPT_APP.dbo.ffsenderQueue output the following: 'The conversation handle is missing. Specify a conversation handle.'
I would appreceiate anybody's help into why i'm getting this. have i set up the stored procs in correctly?
i can provide code of the stored procs if that helps.
thanks.
We have implemented our service broker architecture using conversation handle reuse per MS/Remus's recommendations. We have all of the sudden started receiving the conversation handle not found errors in the sql log every hour or so (which makes perfect sense considering the dialog timer is set for 1 hour). My question is...is this expected behavior when you have employed conversation recycling? Should you expect to see these messages pop up every hour, but the logic in the queuing proc says to retry after deleting from your conversation handle table so the messages is enqueued as expected?
Second question...i think i know why we were not receiving these errors before and wanted to confirm this theory as well. In the queuing proc I was not initializing the variable @Counter to 0 so when it came down to the retry logic it could not add 1 to null so was never entering that part of the code...I am guessing with this set up it would actually output the error to the application calling the queueing proc and NOT into the SQL error logs...is this a correct assumption?
I have attached an example of one of the queuing procs below:
Code Block
DECLARE @conversationHandle UNIQUEIDENTIFIER,
@err int,
@counter int,
@DialogTimeOut int,
@Message nvarchar(max),
@SendType int,
@ConversationID uniqueidentifier
select @Counter = 0 -- THIS PART VERY IMPORTANT LOL :)
select @DialogTimeOut = Value
from dbo.tConfiguration with (nolock)
where keyvalue = 'ConversationEndpoints' and subvalue = 'DeleteAfterSec'
WHILE (1=1)
BEGIN
-- Lookup the current SPIDs handle
SELECT @conversationHandle = [handle] FROM tConversationSPID with (nolock)
WHERE spid = @@SPID and messagetype = 'TestQueueMsg';
IF @conversationHandle IS NULL
BEGIN
BEGIN DIALOG CONVERSATION @conversationHandle
FROM SERVICE [InitiatorQueue_SER]
TO SERVICE 'ReceiveTestQueue_SER'
ON CONTRACT [TestQueueMsg_CON]
WITH ENCRYPTION = OFF;
BEGIN CONVERSATION TIMER ( @conversationHandle )
TIMEOUT = @DialogTimeOut
-- insert the conversation in the association table
INSERT INTO tConversationSPID
([spid], MessageType,[handle])
VALUES
(@@SPID, 'TestQueueMsg', @conversationHandle);
SEND ON CONVERSATION @conversationHandle
MESSAGE TYPE [TestQueueMsg] (@Message)
END
ELSE IF @conversationHandle IS NOT NULL
BEGIN
SEND ON CONVERSATION @conversationHandle
MESSAGE TYPE [TestQueueMsg] (@Message)
END
SELECT @err = @@ERROR;
-- if succeeded, exit the loop now
IF (@err = 0)
BREAK;
SELECT @counter = @counter + 1;
IF @counter > 10
BEGIN
-- Refer to http://msdn2.microsoft.com/en-us/library/ms164086.aspx for severity levels
EXEC spLogMessageQueue 20002, 8, 'Failed to SEND on a conversation for more than 10 times. Error %i.'
BREAK;
END
-- We tried on the said conversation, but failed
-- remove the record from the association table, then
-- let the loop try again
DELETE FROM tConversationSPID
WHERE [spid] = @@SPID;
SELECT @conversationHandle = NULL;
END;
I installed sql 2005 a while back. Then I recently found out my file system was fat32 (I don't understand why the hardware people did this...) and I had to convert to NTFS. Naturally the sql service no longer worked so I uninstalled inorder to reinstall now I can't reinstall it I keep getting this message
native_error=5039, msg=[Microsoft][SQL Native Client][SQL Server]MODIFY FILE failed. Specified size is less than current size.
I'll try to post the full log in a new post.
Hi folks,Can anyone enlighten me here? I'm trying to use a SPROC which, when supplied with an int, looks up the table and returns certain columns from it. I'm using a SqlCommand, here's my codebehind: ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ SqlCommand dataSource = new SqlCommand("retrieveData", new SqlConnection(dbConnString)); dataSource .CommandType = CommandType.StoredProcedure; dataSource .Parameters.AddWithValue("id", poid); dataSource .Parameters.AddWithValue("title", title).Direction = ParameterDirection.Output; dataSource .Parameters.AddWithValue("creator", creator).Direction = ParameterDirection.Output; dataSource .Parameters.AddWithValue("assignee", assignee).Direction = ParameterDirection.Output; etc, etc... And the SPROC:------------------------------------------------------------------------------------------------------------------set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[retrieveData] @id int, @title varchar(50) OUTPUT, @creator varchar(50) OUTPUT, @assignee varchar(50) OUTPUT, @contact varchar(50) OUTPUT, @deliveryCost numeric(18,2) OUTPUT, @totalCost numeric(18,2) OUTPUT, @status tinyint OUTPUT, @project smallint OUTPUT, @supplier smallint OUTPUT, @creationDateTime datetime OUTPUT, @amendedDateTime datetime OUTPUT, @locked bit OUTPUT AS /**SET NOCOUNT ON; **/ SELECT [title] AS [@title], [datetime] AS [@creationDateTime], [creator] AS [@creator], [assignee] as [@assignee], [supplier] as [@supplier], [contact] AS [@contact], [delivery_cost] AS [@deliveryCost], [total_cost] AS [@totalCost], [amended_timestamp] AS [@amendedDateTime], [locked] AS [@locked] FROM purchase_orders WHERE [id] = @id; ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ The id being passed in is definately not null, and is set to a value of an item I know exists. The resulting error is:
Exception Details: System.InvalidOperationException: String[1]: the Size property has an invalid size of 0.Line 63: retrievePODetails.Connection.Open();Line 64: retrievePODetails.ExecuteNonQuery();[InvalidOperationException: String[1]: the Size property has an invalid size of 0.] System.Data.SqlClient.SqlParameter.Validate(Int32 index) +717091... ... Can anyone see anything I'm missing? Thanks,Ally
Using C#, SQL Server 2005, ASP.NET 2, in a web app, I've tried removing the size from parameters of type NCHAR, NVARCHAR, and VARCHAR. I'd rather just send a string and let the size of the parameter in the SP truncate any extra chars if need be. I began getting the error below, and eventually realized it happened only with output parameters, as in the code snippet below.String[3]: the Size property has an invalid size of 0. par = new SqlParameter("@BusinessEntity", SqlDbType.NVarChar); par.Direction = ParameterDirection.Output; cmd.Parameters.Add(par); cmd.ExecuteNonQuery();What's the logic behind this? Is there any way around it other than either finding out what the size should be, or assigning a size larger than would ever be needed? ThanksMike Thomas
View 6 Replies View RelatedI have one db test with one .mdf and .ldf file...mdf file size is 100mb and for some reson i removed all the tablesfrom that .mdf file and transfer it into new secondary file so all thetables moved into secondary file now i want to reduce the first .mdffile from 100 mb to 50mb is that possible,it's showing 90mb is free.Please reply
View 1 Replies View RelatedI want to know encrypted data's size for designing database field size.
For example, cardnumber varchar(20) Encrypted by Triple_DES and PassPhrase, How match size does need to encrypted data store field.
I think the size does not depend to PassPhrase char length.
Regards,
Yoshihiro Kawabata
I am getting error to run stored procedure using executenonquery method. The Stored Procedure is having OUTPUT parameter.
ExecuteNonQuery statement is called using SqlHelper.
Error : String[18]: the Size property has an invalid size of 0
Just wanted to know what is a general rule of thumb when determining log file space against a database's data file.We allow our data file for our database to grow 10%, unlimited. We do not allow our log file to autogrow due to a specific and poorly written process (which we are in a three month process of remove) that can balloon the log file size.Should it be 10% of the Data file, i.e. if the Date file size is 800MB the log file should be 8MB?I realize there are a myraid of factors that go against file size but a general starting point would be nice.ThanksJeff--Message posted via http://www.sqlmonster.com
View 4 Replies View RelatedThe Tabular model is showing 19 GB on disk, but it is acquiring around 40 GB in memory.
View 3 Replies View RelatedHi,
An MSSQL DB running SAP indicates a smaller DB size (MMC & SAP) than the actual physical size. The difference is about 8 GB.
A lot of records were deleted before this. Did they remain in the DB as NULL values or something ?
Does anyone know what the reason for this could be ? And how to clean this up ?
Thanks in advance,
Paul
Hi,
i use this script that show me the size of each table and do the sum of all the table size.
SELECT
X.[name],
REPLACE(CONVERT(varchar, CONVERT(money, X.[rows]), 1), '.00', '') AS [rows],
REPLACE(CONVERT(varchar, CONVERT(money, X.[reserved]), 1), '.00', '') AS [reserved],
REPLACE(CONVERT(varchar, CONVERT(money, X.[data]), 1), '.00', '') AS [data],
REPLACE(CONVERT(varchar, CONVERT(money, X.[index_size]), 1), '.00', '') AS [index_size],
REPLACE(CONVERT(varchar, CONVERT(money, X.[unused]), 1), '.00', '') AS [unused]
FROM
(SELECT
CAST(object_name(id) AS varchar(50)) AS [name],
SUM(CASE WHEN indid < 2 THEN CONVERT(bigint, [rows]) END) AS [rows],
SUM(CONVERT(bigint, reserved)) * 8 AS reserved,
SUM(CONVERT(bigint, dpages)) * 8 AS data,
SUM(CONVERT(bigint, used) - CONVERT(bigint, dpages)) * 8 AS index_size,
SUM(CONVERT(bigint, reserved) - CONVERT(bigint, used)) * 8 AS unused
FROM sysindexes WITH (NOLOCK)
WHERE sysindexes.indid IN (0, 1, 255)
AND sysindexes.id > 100
AND object_name(sysindexes.id) <> 'dtproperties'
GROUP BY sysindexes.id WITH ROLLUP) AS X
ORDER BY X.[name]
the problem is that the sum of all tables is not the same size when i make a full database backup.
example of this is when i run this query against my database i see a sum of 111,899 KB that they are 111MB,but when
i do full backup to that database the size of this full backup is 1.5GB,why is that and where this size come from?
THX
Do I have other option beside using IF..ELSE IF? TIF
-- GET INFORMATION OF THE JOB
DECLARE @JOBIDAS Char(10)
DECLARE @VRUSERVICEHRSAS Decimal(18,2)
DECLARE @VRUSERVICEMINAS Decimal(18,2)
DECLARE @BILLEDFLATAS Decimal(18,2)
DECLARE @BILLREGRATEAS Decimal(18,2)
DECLARE @MIN_HRSAS Decimal(18,2)
DECLARE @COUNT_GREATER_MINTinyInt
DECLARE @COUNT_LESS_MINTinyInt
SET @VRUSERVICEMIN = 46
SET @BILLEDFLAT = 0
-- PROCESS ONLY RECORDS WHERE THERE IS NO FLAT FEE
IF @BILLEDFLAT = 0
BEGIN
IF @VRUSERVICEMIN BETWEEN 0 AND 15
BEGIN
SET @VRUSERVICEMIN = .25
END
ELSE IF @VRUSERVICEMIN = 15
BEGIN
SET @VRUSERVICEMIN = .25
END
ELSE IF @VRUSERVICEMIN BETWEEN 15 AND 30
BEGIN
SET @VRUSERVICEMIN = .5
END
ELSE IF @VRUSERVICEMIN = 30
BEGIN
SET @VRUSERVICEMIN = .5
END
ELSE IF @VRUSERVICEMIN BETWEEN 30 AND 45
BEGIN
SET @VRUSERVICEMIN = .75
END
ELSE IF @VRUSERVICEMIN = 45
BEGIN
SET @VRUSERVICEMIN = .75
END
ELSE IF @VRUSERVICEMIN > 45
BEGIN
SET @VRUSERVICEMIN = 1
END
END
PRINT @VRUSERVICEMIN
Here are my scenarios:
We have an application with replicated environment setup on sql server 2012 . Users will have a replica on their machines and they will replicate to the master database. It has 3 subscriptions subscribed to the publications on the master db.
1) We set up a replica(which uses sql server 2012) on a machine with no sql server on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 33gigs and ldf has grown to 41 gigs. I went to sql server management studion . Right click and checked the properties of the local database. over all size is around 84 gb with little empty free space available.
2) We set up a replica(which uses sql server 2012) on a machine with sql server 2008 on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 49 gigs and ldf has grown to 41 gigs. I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.
3) We set up a replica(which uses sql server 2012) on a machine with sql server 2012 on it. We have dropped the local database and recreated the local db and did the initial synchronization using replmerge tool. The mdf file has grown to 49 gigs and ldf has grown to 41 gigs. I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.
Why it is allocating the space differently? This is effecting our initial replica set up times.
Is it possible to catch and error and then keep the process going in a stored procedure?
So if an update encounters a primary key violation on a row, is it possible to skip that row and keep the process going?
Hi! I have some try .. catch block trying to insert some data into database. During its action duplicate key row insert error could raise, for example. The question is how could I know distinguish it from other sql errors? Object ex (Catch ex As Exception) has only message property '{"Cannot insert duplicate key row in object 'dbo.Group_Courses' with unique index 'IX_Group_Courses'.The statement has been terminated."}' and type System.Data.SqlClient.SqlException. Knowing the type of error is not enough, because there are different SqlExceptions. Even the message is not unique for this error, because now i deal with 'dbo.Group_Courses' and then it could be other table. Is there something that unique identifies each error? For example error code. If it exists, where could I get it?
Thanks in advance!
I test my the now function and it is getting the right date. When I try to send that to the sql database I have it turns it into 1/1/1900. Does anyone know why this is happening, I have tried everything Here is my code:
sql = "Insert into tblguestbook(date, name, city, state, email, Url, Comments)Values ('"
sql = sql & Request.Form(Now) & "','"
sql = sql & Request.Form("nametxt") & "','"
sql = sql & Request.Form("citytxt") & "','"
sql = sql & Request.Form("statetxt") & "','"
sql = sql & Request.Form("emailtxt") & "','"
sql = sql & Request.Form("urltxt") & "','"
sql = sql & Request.Form("commentstxt") & "');"
Hi,
I would like to handle a sql error in t-sql and return a certain value in case error occurs. For example if I would like to add a record I want to return a certain identity value or maybe a status of transaction (0 for incomplete, 1 for succesfull trans).
If error occurs in sql I cannot return any values back to asp.net because of What I am doing at the moment is catching an error in asp.net and then displaying an error message. Is there a way to return only a return value to asp.net and somehow handle the error in t-sql?
Thanks
I don't know what's wrong with SQL2000 setup, the problem is:
whenever I execute a query with a date/time such as 02/02/200,
SQL give me an error message saying that the date is "Out of Range".
Any ideas, thanks in advance.
I'm having trouble with something and I was hoping that you could point me in the right direction.
Here's the scenario:
I have a VB application that clients use to add records to a SQK 2K DB. The info they have added that day is shown in a grid. They have the ability to edit items in the grid, and then update those changes to the database. The problem is that sometimes they change the values to something they shouldn't. To combat this I've started experimenting with check constraints. In query analyzer I test the constraint by trying to update an entry to an 'illegal' value. When I do this, I get an error saying: "Server: Msg 547, Level 16, State 1, Line 1" and the change is not made. What I'd like to do is to give the user a dialog box notifying him of the error. Is there a way to have a sub-routine or stored procedure be triggered when a message of this type is generated?
My specs are: W2K pro clients, SQL2K on an NT4 sp6a server. Application is written in VB6.
Any help is greatly appreciated.
thanks,
-scott
I have a select statement that works, but I know there has to be a better
way( I apologize for being TSQL brain dead today). Here is the statement
SELECT PATIENT_ACPT_STATUS, DISP_NOTES, RECORD_ID, modified_by, last_name, ddate
FROM PATIENT_MEDICATION_DISPERSAL_
Where (ddate = convert(char(10),getdate(),101) and
(MODIFIED_BY = CURRENT_USER) and
rec_status = 1) or
(ddate = convert(char(10),getdate(),101) and
(PATIENT_ACPT_STATUS = 1)) OR
(ddate = convert(char(10),getdate(),101) and
(MODIFIED_BY = 'open'))
Hi All,
We have got a new HP server and SQL is preinstalled, But when we are trying to start SQL, it gives an error "The handle is invalid".
We tried to reinstall the SQL, but , being a server t doesn't allow to do so
Please assist.
regards,
Jatin
I have a need when a Update, Insert or Delete is done to a record in DB "A", it will send the appropriate UID to a different table in different DB "B".
My first thought was to have a trigger on the table in DB "A" simply call a stored procedure on DB "B" and do the UID.
However - my question is what is the best approach and what's the best way to establish the connection to DB "B" for the UID from within DB "A"? We can't use linked servers - DNSLESS string would be the preferred connect way. Not sure how to execute it within a trigger.
Is even using a Trigger to Stored Proc the best way?
What about Transaction Replication - which I've never attempted - is that a better way?
Just looking for some guidance here so I don't needlessly burn time down a path that isn't recommended or simply won't work.
Thanks as always for your input,
Peter
Hi,
I build a local cube from a relation database. In the database there are 1:n relations.
Is there a way to handle 1:n relations?
For example:
I have a table LOGGEDFLAW and a table LOGGEDREASON with a 1:n relation between them. We create a select statement of these tables and as an result we get duplicate records of LOGGEDFLAW each time more than 1 record of LOGGEDREASON are associated to 1 record of LOGGEDFLAW - this is the standard result I get with an relational JOIN operation. Now I want to count the LOGGEDFLAWs without the duplicates generated by the 1:n relationship.
Best regards,
Thorsten
Hi All,
Please help me out how to implement the locking in below scenario
Req -
There are two tables Table1 & Table2
If I will insert in table1 then related data fields will be auto updated in table2 , similarly based on the data in table2 table1 data needs to be updated.
Now the sync of table1 & table2 is working fine.
My prob is we are handling the updation/insertion from the UI screens . Two separate screen for each table. When we have multiple user accessing the screens say - User1 updates table1 and User2 updates table2 then we need to implement the locking so that at one time one screen will allow updation in the table1 and hence table2.
The other screen shouldnt allow updation in table2 and hence in table1.
This is very common locking functionality ...but am not getting any way to implement it , Please advise.
Srain.
I have a friend who is doing a voting application for one of his customers and they are concerned about the volume that sql server can handle. He's looking a single sql server 2005 with plenty of hd space and 4gb of memory. The app will look to see if you voted and then insert a record accordingly.
Are there any papers out there or apps that can show the amount a server can handle?
thanks.
I already asked this question; however, I am giving all the detailsnow:We get large files(millions of records) and we need to load it into ourtables using import export wizard. Some of the fields in the file canbe Null and so we are forced to create table with fields that allowNulls with default ''. However when we insert data into these tablesit puts Null in those fields even though we have a default '' (I do notthink we have any work around for that; do we?)Finally we need to go through each field and update it to '' if it is aNull and that takes LOT OF TIME.If (select count (*) from <tablename> where <columname> is Null) >0BeginUpdate <tablename>set <columnName> = ''where <columnName> is NullendPlease let me know if there are any work arounds for this crisis ?Thank you very much in advance!
View 1 Replies View RelatedI need to know if there is a better way to construct this SQL statement.(Error handling is omitted)MS SQL Server 2000Insert into FSSUTmpSelect a.acct_no, a.ac_nm, a.ac_type, 10, -1,-1 * sum(CHARINDEX(convert(char(4), b.post_yr), @post_yr) * CHARINDEX('-',CONVERT(char(2), b.post_prd - @post_prd - 1)) * b.prd_trn_amt),-1 * sum(CHARINDEX(convert(char(4), b.post_yr), @post_yr) * CHARINDEX('0',CONVERT(char(1), b.post_prd)) * b.prd_trn_amt)FROM GLAccounts a, GLBalances bWHERE b.cmpny_cd = a.cmpny_cdAND b.acct_no = a.acct_noAND a.cmpny_cd = @cmpny_cdAND ac_ctrl_type between '200' and '219'Group by a.acct_no, a.ac_nm, a.ac_typeThe part I’m wondering about is the 2 sum sections.The GLBalances table has following important fields:Post_yr -- the posting yearPost_prd – the posting periodPrd_trn_amt – The beginning balances if the period is 0, or the nettransactions for periods 1 through 12.The first sum gives the current balance as of the period @post_prd by addingall of the periods from 0 to @post-prdThe second sum is just the beginning balance.It is doing a conditional sum by using CHARINDEX to be 0 if the recordshould not be added and 1 if it should.There is a problem as it stands when you are looking for the balances whenthe @post_prd is 9 or greater because “b.post_prd - @post_prd – 1” willbe –10 or smaller. Then the CONVERT(char(2) ….. is an error, so CHARINDEXis 0 when it needs to be 1.I can fix that by using SIGN and it will work fine. What I what to know, isthere a better way to populate the table, where one of the values is aconditional sum?This is a STORED PROCEDURE from a commercial product, so I can’t changeanything else other than the STORED PROCEDURE.
View 1 Replies View RelatedHi,What exactly does the above (subject) error mean? I'm getting it from anadp file when used by a few people at the same time (each user has thefile in their own filespace though). Access is through windowsauthentication and it only seemed to occur during an update of aspecific table.. The problem is it didn't happen to everyone and Ican't recreate it at all on my own, so am wondering if it was somethingto do with the level of traffic to/from the server at that specific time.Any clues?Cheers,Chris
View 4 Replies View RelatedDoes anyone knows of a tool that will help me manage my queries? I have 100's of them and all scattered. On my PC at home, some in my laptop, some of them at work, some in memory sticks. Then, when I need them I can't find the one I'm looking for so I end up writing the query again.
Any ideas?