How To Ignore The Last 20 Characters In A Field While Matching
May 22, 2008
I need to pull address info and need to match customername from a spreadsheet.
Due to bad design, in our database instead of having a 'status' for the customer,
they just added ' - ACCOUNT CANCELLED' to the customername
I exporting a table of comments. There are some line returns in the comments. Some of these data are paragraphs of data! For some reason, when I am exporting the data, it treats the line return within the comment column as a new record. I am using a -c character data type so (newline character) is the row terminator. How do I get the BCP OUT to ignore a newline character within a record?
For example: ID~Comment -- ------- 1~This is a comment 2~Hi,how are (user hit carriage) you (you is part of next row in bcp out) 3~Next record
I am comparing two fields one from our legacy table and one in our new table structure that should have identical text data. The new field has an assortment of ANSI characters where the legacy data did not have these. Is there anything I can do that will ignore all ansi character differences? The only route I can think of is just do a replace on each ANSI type on the new column but there are quite a few character types.
In my application I must store over 16000 character in a sql table field . When I split into more than 1 field it gives "unclosed quotation mark" message. How can I store over 16000 characters to sql table field (only one field) with language specific characters?
I have a PHP page where the user enters a date that represents the last day of a timesheet (ts_end) and the hours worked on that timesheet. That is then written into a table where the date is a datetime type. Because the user just enters a date, the time portion of the field is set to 00:00:00. In another place, I need to sum the columns for reports submitted between the beginning of a timesheet (ts_end -6 days) and the ts_end date.
The problem is that chartreviewed values entered on the ts_end date are getting lost because the time part of the ts_end field is 00:00:00 and the time part of the dateentered for the chartreviewed value is not. For instance using 2/4/2004 as the ts_end date looses the 192 charts.
I know I can revise the query to look for charts where the dateentered is less than dateadd(d,1,ts_end) and get the right values. It seems like there has to be a way though to tell sqlserver to ignore the time part of a datetime field when querying.
I have a table with a column that is currently a varchar(50), but I want to convert it into an int. When I try to just change the type in design mode I get an error that conversion cannot proceed. When I look at the field it appears some of the entries have special characters appended at the end, I see a box after the value.
How can I remove all speical characters and then convert that field to an int?
Also I tried the following query which did not work as well, same error about conversion.
I have tables in my database, tblNames1, tblNames2, tblNames3, and a main addresses table (currently empty). Once I've imported the address data I need to match the addressIDs in the names tables to the Primary ID in the address table based on the values of a field CompanyName (which is common to all the tables) My issue is that I have a huge CSV file with the master address information but obviously SQL server needs to assign foreign keys so the names tables can linked to corresponding rows in address table. It's a a many to 1 relationship as their will be one address with multiple name entries. All the names are normalized so everything can be matched up...
I am doing some analysis on our customer base and their payment profiles. I have generated two profile strings, one for whether the balance of an account has gone up or down and one for the size of the balance in relation to the normal invoice amount for the customer. So (for example) the balance movement string will look like this:
UUUDUUUDUUUD-D00 Where U = Up, D = Down, - = no change and 0 = no change and no balance
I want to analyse these strings in two ways. The first is that I want to find customers with a similar pattern: in the example below the first and last patterns are the same, just one out of sync but should be considered the same
Movement Multiple CountRecords UUUDUUUDUUUD1230123012301175 ------------0000000000001163 UDUUUDUUUDUU3012301230121082
The second type of analysis is to find customers whose pattern has changed: in the examples above the patterns are repeated and therefore 'normal' in the records below the patterns have changed in that the first part does not match the second part.
Movement Multiple CountRecords UUDUUUDUUUUU-----------07 UDUUUDUUUUUU------------7
good way to approach this without either a cursor or a hidden REBAR. The challenge as I see it is that I have to interrogate every string to find out if there is a repeating pattern and if so where it starts and how long it is (heuristic because some strings will start with a repeating pattern and then the pattern may change or deteriorate) and then compare the string for N groups of repeating characters to see if and when it changes and I can't think of an efficient method to do this in SQL because it is not a set based operation.
Hello All,I've got a DATETIME field, and it includes hour:minutes:second data. I want to do selects where I can simply match on the month, day and year. For instance, something like this:SELECT * FROM QuizAttempts WHERE DateTimeTaken = '1/12/2006'And have it match anything that was taken that day, regardless of *when* it was taken. Any suggestions?Thanks! -Josh
Does anyone know a function in SQL or how I can get the amount of characters of a field?
I have a column named NU_IPS wich contains data varchar type, that has a % symbol at the end, like 9.7% and so on... But in original table it can't be like this (it has to bem float type), I just want the number content, like this 9.7 For that I need in DTS put a query that convert it. That's why I need a function or something that can get the quantity of characters of each field.
So, It would be someting like this...
select substring(convert(varchar(getSizeField() - 1), nu_ipi), 1, 4) from dbo.t_STAGEAREACHAIR
It would cut always the last caracter, wich is '%'...
I have a sql database that includes a table of customer contact information. The area code for many of my customers is about to change. Is there a way to mass update the phone number field so that all phone numbers that currently start with 111 change to 222 ? Ex 1115554444 to 2225554444 ?
I have a table in sql server that has a field with numeric characters, i would like to select some but not all characters from this field and insert it into a new field. The field that i want to get some characters from has other characters that i dont need, It has a lot of zero's next to the numbers that i need. so far i created a stored procedure, but its not working. I want to extract the characters and insert them into a new field in the format "000.00" or "00.00". The values are either hunderths or tenths, which makes it difficult for me to decide which characters to ignore. Please see my SP created so far below:
CREATE PROCEDURE dbo.spUpdatePaymentDetails AS UPDATE dbo.PaymentDetails SET NewAmount = SUBSTRING('00' + TransactionAmount, 1, LEN('00' +TransactionAmount) - 2) + '.' + SUBSTRING('00' + TransactionAmount, LEN('00' + TransactionAmount) - 1, 2) GO
the character "." is not in the original field so therefore i would like to insert it into the new field.
hey, what the best way of stripping out a list of characters from a specified field in a table. e.g If first name consists of ABCD'E-FSA, we wnat to strip the ' and the -. There is about 15-20 characters like that. what's the best way of doing it other encapsulating in the replace function that many times. thanks zoey
I am developing a message board using ASP on IIS and SQL Server 2000, and I am running into a problem.
When a user enters their post, they enter their user name, subject, and of course all of their post content. Now the post content should be an unlimited number of characters since it could end up being multiple paragraphs.
I know I could just use an ASP file system object and write the text to a file, but I wanted to save all of these paragraphs as a field in a database table so I could pull it from the database so it could be edited by the user.
Is there a way to make a field be able to take in an unlimited amount of characters?
Or is this the wrong way to do things; is it bad to have an unlimited amount of characters in a table field? Should I stick to using the ASP System File Object?
I have a large table, tblMessage, which stores e-mail messages in textfields. I need to remove the carriage returns the data in these fields,but I have not yet figured out how to do so.I thought that the way to do this would be with the REPLACE function;unfortunately, of course, the REPLACE function cannot work with TEXTfields. I tried CASTing the text field to VARCHAR(8000); however, someof the rows have more than 8000 characters in the text field, so it bombs.Here is the SQL that I tried:selectmsgID,msgSent,msgFromType,msgFromID,msgSubject,REPLACE (CAST(msgMessage AS varchar(8000)), CHAR(13), '<BR>') ASnewMessage,msgOriginal,attIDinto tblMessageNewfrom tblMessageI'm at my wit's end. Truncating the text field to 8000 character is anacceptable option, but I can't even seem to be able to do that.I'm using SQL Server version 7.
I am using the following expression to strip the last 11 characters in a field group and it returns an error saying that Len cannot use a negative number. It must be 0 or greater. Is there a better alternative?
Hello all,I have a field defined as VARCHAR(8000) yet it only accepts a maximum of 1024 characters. Does anyone know how I can save 8000 characters in a single field?Thanks,Bill.
I am having an interesting error. I have a bunch of data that I am updating to a field in my sql server 7.0 database. It updates the data, however only puts the first 64,999 characters into the field. The datatype is ntext. From what I understand, ntext datatype can hold much more than 65,000 characters. Am I right in this? The data I'm putting into the field is html tags/text. I've tried several different data sets. I'm updating the data using Coldfusion/SQL commands.
Here is my SQL syntax:
UPDATE htmltest SET html_offline = '#form.html#' WHERE htmlid = #form.htmlid#
Hopefully, someone can help me. I am working with a database that contains multiple fields within the tables that are being used for Clinical notes. The fields are defined as VARCHAR(3500). But when I try to extract data (either through Query Analyzer or Crystal Reports), only the first 256 characters are displayed. I ran a query to give me the length of the maximum entry size which returned 2722 characters, yet only 256 are displayed.
How do I go about extracting ALL of the data from this field? Any help is much appreciated.
When we are getting data in a table and we want to replace characters with other characters. For example, We have a table with a street address, and there are numerous ascii character values we want to review and replace if they exist. We were looking at using a table with 2 columns, 1 containing each ascii character value the other it's preferred replacement value. Then updating the street address searching through each ascii character and replacing it if needed. Currently, we are running it through a looping process searching each individual address for each ascii character, and updating it.
MS SQL 2000. Does anyone know how to find all rows where an nvarchar column contains a specific unicode character? Is it possible without creating a user defined function? Here's the issue. I have a table Expression (ExpID, ExpText) with values like 'x < 100' and 'y ≤ 200'. where the second example contains Unicode character 8804 [that is, nchar(8804)]. Because it's unicode, I don't seem to be able to search for it with LIKE or PATINDEX. These fail: SELECT * FROM Expression WHERE ExpText LIKE '%≤%' -- no recordsSELECT * FROM Expression WHERE PATINDEX('%≤%', ExpText) -- no records However, SELECT PATINDEX('%≤%', 'y ≤ 200') will return 3. Any suggestions? Thanks in advance.
is there any way i can make a field in a table accomodate more than 1023 charcters? i used the 'varchar' datatype and used a length of 2500, but still, I can't fill up a field with more than 1023 characters. Is there any way to change it? Also, is there any way to used a symbol or special character in a field? Can SQL server identify such a character? like the alpha or beta symbol...
Can any one help me, i'm building a dynamic database driven site using dreamweaver and MS SQL2000 andi'm haveing problem storing over 8000 characters in a table filed (IE: it wont let me!!) is there a special table field value that i need to set to get more characters in a table field or is this a limitation of SQL.
If I create a row with a nullable text column whose initial value is null and then update the column with a value that is exactly 256 characters long, the value remains null. Once I update the column to any other value (including null), it works as expected. I have not yet seen a way around this.
I have a feeling I'll be forced to use a script and a trigger for thistype of field format but I'm wondering if any of your wizards couldpoint at a simple way I could do something like this:For example, if I want to be able to keep track of new orders followingthis incrementing convention:ORD100000001ORD100000002ORD100000003.... etc ...Does MSSQL2000 have features that I can simply set for this kind offield or will I be resorting to writing up a SQL script and a trigger?
Could anyone help of how to match the exact characters in a data field in SQL 2005 Developer. For example, if one has a password "GooD", then when he or she enters "GOOD", "good", etc, the database will not match the password. And he or she must enter the exact characters, which is "GooD". Thanks.
Could anyone help of how to match the exact characters in a data field in SQL 2005 Developer. For example, if one has a password "GooD", then when he or she enters "GOOD", "good", etc, the database will not match the password. And he or she must enter the exact characters, which is "GooD". Thanks.
I have a table where i have to make a check constraint that states the first 3 characters of the customerid field must be the first 3 characters of the company name I am so lost I looked everywhere.
