Hi,
Does any know how to increase a session timeout for Report Creation uing SQL Server 2005 Reporting Services. Iam trying to export a report (to a .pdf) using SQL 05 reporting services. However, it seems that the the query is timing out coz of session-time out. Can anyone tell me how to increase this value ?
Thanks
Nik
We run std 2008 r2. I've never been able to get to my ssrs server thru ssms as u can see as part of the question atÂ
[URL] ..... but I've found workarounds to this point by knowing how to look at the rs db itself and by having access to the server itself thru rdp with an admin acct.
I'm looking at an error from a user that reminds me of what we used to call session timeouts. They would occur when the user has walked away from his desk long enough for ssrs to delete refs to the report he just ran.
I logged into the server itself hoping to find both exec and session timeout params via the rs config tool but did not see them there. What the config file is called and where i'd likely find it? Or perhaps a query I could use to see what the current values are?
I have a Performance issue in ssrs report , query takes execution time 1 to 2 min. When I add the non clustered index for one of the table columns which takes only 2 sec to execute the query. But as from my environment I couldn't able to add the index due to these changes will effect for all reports. Without adding indexes which takes 2 min to run that report. My question is:
Is there any way to add the non-clustered index on the report itself like if a non clustered index exists "execute the query" else create a non clustered  index and run that report with newly created index in report itself like a temp table concept. How to add this concept in this below query:Final Query without non clustered index, takes 2 min to execution time ---
with cte1
( MovementDate,
MovementTypeDesc,
CDCNumber,
MovementTime,
LocationReportMovement,
OtherLocationCode,
[code]....
When a user runs the report after a minute or 3 the user gets a timeout message, if an administrator runs te same report he will get the results. No errors in log. report timeout on 1800 seconds
View 2 Replies View RelatedI have a very frustrating problem. But given that this is a development forum, I'll keep that for my 'Envelope Lickers Rehab' and instead talk about an issue I'm having.
I have a very large query (line-wise) that executes in less than a minute when run from the SQL Management Studio as well as via Excel Services.Â
It is a stored procedure with one parameter. When I try to prime the designer with this query it gives me the following message:
"Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
The statement has been terminated."
I've considered cracking open the xml source and manually creating the fields, but I'd rather not go there.
Hello.
I am having problems with a couple of queries in the Development Studio (Reporting Services 205). I am working on a report that runs a lot of functions so I expect it to be slow. But it times out in 30 seconds.
Error Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
The report finishes when clicking on the preview tab but not when on the data tab. If finishes fine when deployed as well. Is there a way to increase the amount of time the query designer in Visual Studio takes to time out on a query?
I have tried setting the Connect Timeout=60 on the Data Source but it seems to be overridden by a setting in Visual Studio 2005.
Thanks much for any help.
Leo
Hello,
SQL Server Reporting Services 2005 (SSRS) is installed on Vista Ultimate.
I cannot access to the http://localhost/ReportServer page. IE posts an internal error HTTP 500.0 (after IE required a Windows account).
All the configurations of Reporting Services are OK. In the Log file, there is nothing: the Web Services does not seem to be launched.
By continuing the investigations in IIS 7 (activation of the €œRules of follow-up of the requests having failed€?, I found the error following:
IIS Trace Detail Highlights
No. EventName Details Time
53. MODULE_SET_RESPONSE_ERROR_STATUS Warning
ModuleName="IsapiModule", Notification="EXECUTE_REQUEST_HANDLER", HttpStatus="500", HttpReason="Internal Server Error", HttpSubStatus="0", ErrorCode="Syntaxe du nom de fichier, de répertoire ou de volume incorrecte. (0x8007007b)", ConfigExceptionInfo="" 09:02:33.716
Translation of the french sentence: ErrorCode="Incorrect syntax of the file name, the directory or the volume."
I made a full research on Internet and in the documentation at my disposal and I did not find anything which can advance me towards a beginning of solution€¦
Thank you with all for the assistance which you will be able to bring to me.
Would that be compatible or do I need SQL Server 2008 to display the report?
Thanks,
Steven
here is my error
System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: Logon failed. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Logon failed. at Microsoft.ReportingServices.WebServer.RSCustomAuthentication.LogonUser(String userName, String password, String authority) at Microsoft.ReportingServices.WebServer.ReportingService.LogonUser(String userName, String password, String authority) --- End of inner exception stack trace --- at .................
Please help me
How to increase the chart report size to avoid the mismatch of output data like below....
View 2 Replies View RelatedDo we have any option to increase/decrease textbox width dynamically? I know that we have option to increase or decrease height.
View 6 Replies View Related I have a range bar chart Inside a table of row group and the chart is repeatedly generate according to category ,i want to increase chart height dynamically based on category.
suppose for if category =A THEN CHART HEIGHT=10CM
category =B THEN CHART HEIGHT=7CM
When I try to put a new report in existing folder there's no problem,but now i have fresh installed Reporting Services and no Visual Studio2005. How do i open a new folder?
View 1 Replies View RelatedHi My project is in .NET 2003 i.e. framework 1.1 and database in SQLServer 2000. But the reports have been developed using SQLServer 2005 Reporting Services. Now when I am trying to deploy them through deployment project of .NET its giving me following error:"Using other editions of SQL Server for report data sources and/or the report server database" is not supported in this edition of Reporting Services. Now I am really confused with this. Can any one please guide me regarding this ASAP. Thanks, Falguni
View 4 Replies View RelatedWhen i open any reports getting the below error message.An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database.
(rsReportServerDatabaseError)Procedure or function 'CreateSession' expects parameter '@SiteZone', which was not supplied. Â
Hi,
Will someone please tell me how to create Report history(snapshots) in reporting service 2005.
Thanks and regards
Altaf Nizamuddin
I have a report that is a little wide, and when I export it to an Excel file it spans about 2 pages. I have it set to an 8.5 height and 11 width for printing in landscape on normal-sized paper. But is there a way to make sure that the report exports with the printing page break covering the entire width so that the report prints only one page across? The users don't want to resize in Excel before printing.
View 3 Replies View RelatedHi,
I'm having problems navigating from one report to another one if the second report has a multi-valued report parameter. When I navigate to the second report, I don't pass any parameters, but I get an error "parameter is missing a value" for the multi-valued report parameter. I have it setup as allow "multi-value" and "blank value". Any idea what the issue might be?
Thanks.
I have a report which works fine with visual studio but when i uploaded the same into report server and tries to access it through IE or chrome or anything its dam slow.
how to get rid of this issue?
Hello friend,
my problem is , i want to deploy my rdl and rds file which i make in the sql 2005 reporting services. Now i want to deploy this rdl through asp.net coding using language VB
i hope someone is help me
Thanks
Rahul Sinha
I'm using SQL Express with Advance Services & I get this error when I try to deploy my reports. Why do I get this error
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'EDPSYS'. (rsErrorOpeningConnection)
The feature: "Remote access to report data sources and/or the report server database" is not supported in this edition of Reporting Services. (rsOperationNotSupported)
Justin Song
Hello,
Currently, I have to manully create RS 2005 reports which I export into an Excel later. Is there a way to create a SSIS package that could automate this somehow?
Thanks for sharing your thoughts and ideas!
Hi,
Could someone help with the following problem, I what to create a cross-tab report of the following data, grouped by Colour:
RAW DATA
Name
Colour
Sarah
Black
Kim
Red
Jane
Black
Jane
Pink
Robert
Yellow
Tom
Green
Tom
Black
Billy
Black
Sarah
Black
Sarah
Black
Tom
Pink
Kim
Pink
Robert
Black
Group Colours by Names Report
Number
Proportions %
Name
Black
Green
Pink
Red
Yellow
Total by Name
Black
Green
Pink
Red
Yellow
Billy
1
1
100.00%
0.00%
0.00%
0.00%
0.00%
Jane
1
1
2
50.00%
0.00%
50.00%
0.00%
0.00%
Kim
1
1
2
0.00%
0.00%
50.00%
50.00%
0.00%
Robert
1
1
2
50.00%
0.00%
0.00%
0.00%
50.00%
Sarah
3
3
100.00%
0.00%
0.00%
0.00%
0.00%
Tom
1
1
1
3
33.33%
33.33%
33.33%
0.00%
0.00%
I want to produce a Matrix cross-tab report, like the above, within Reporting Services. Any suggestions welcome
Many Thanks,
Radha
I have a report that displays fine in VS 2005 (in the Preview tab), and if I hit it via a URL in IE as a deployed report. However, when I embed it in a ReportViewer control for display on a web site, I get no data back for the report. I am using an Oracle database for the data source. None of the the logs in reporting services show anything wrong, there are no events in the event viewer to indicate any problems, Oracle logs also show no problems and no errors are returned to the page when the "View Report" button is clicked.
Anyone out there have a clue? I certainly don't.
Mike
Here:
http://msdn2.microsoft.com/en-us/library/ms160911.aspx
I read that this sample is included, however when I install the samples the other three are in the "Extension Samples" directory but the "Custom Report Item Sample" is missing. Can anybody please tell me where I can find it?
Thank you!
Hi,
I tried to pass parameter from one report to another report. I can send the parameter using following option:
I used jump to url option and write the following expression:
="javascript:void(window.open('http://hpsi-dev/Reports/Pages/Report.aspx?ItemPath=%2fNextGen+Reports%2fMAUA%2fSales+Order+Detail&rs:Command=Render&SalesOrderNumber="+Fields!SalesOrderNumber.Value+"'))"
and it shows me the following in browser url
http://hpsi-dev/Reports/Pages/Report.aspx?ItemPath=/NextGen+Reports/MAUA/Sales+Order+Detail&rs:Command=Render&SalesOrderNumber=SO43667
now the problem is how to get this ordernumber in my report any option ???pls urgent...any javascript function to take this no into my another report
I tried to export a reort using SQL 2005 Reporting Services. However Iam getting the following log on the screen :
[logs After upgrading the SQL 2005 with SP2 ]
Execution 'ssem4cntbzve525531im5aup' cannot be found (rsExecutionNotFound)
Description: An unhandled exception occurred during the execution of the
current web request. Please review the stack trace for more information about
the error and where it originated in the code.
Exception Details: Microsoft.Reporting.WebForms.ReportServerException:
Execution 'ssem4cntbzve525531im5aup' cannot be found (rsExecutionNotFound)
Source Error:
An unhandled exception was generated during the execution of the current web
request. Information regarding the origin and location of the exception can
be identified using the exception stack trace below.
Stack Trace:
[ReportServerException: Execution 'ssem4cntbzve525531im5aup' cannot be found (rsExecutionNotFound)]
Microsoft.Reporting.WebForms.ServerReport.GetExecutionInfo() +286
Microsoft.Reporting.WebForms.ServerReport.SetExecutionId(String executionId, Boolean fullReportLoad) +109
Microsoft.Reporting.WebForms.ServerReport.LoadFromUrlQuery(NameValueCollection requestParameters, Boolean fullReportLoad) +90
Microsoft.Reporting.WebForms.ReportDataOperation..ctor() +326
Microsoft.Reporting.WebForms.HttpHandler.GetHandler() +194
Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context) +44
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +303
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
Can any one help me on this issue ?
Regards,
Nik
Hello,
How can I stop a report I started by using:
ReportExecutionService rs = new ReportExecutionService()
.
.
.
rs.Render(...)
I need to stop the report when a user clicks a button in my aspx page.
TIA
gad
I'm trying to add a custom report format to ssrs 2005 as per this [URL] I've added the code snippets in the example to three different ssrs 2005 server RSReportServer.config files but it does not work i.e do not show up in the export drop down when rendering report.
I've tried starting and stopping reporting services and it still does not works.
I've also modified the existing csv extension  with different options to see if it works but to no avail.However it works with SSRS2008 R2 . In fact it works right after I saved the config file, no restart needed.For SSRS2005 the file is in C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServer. I checked the registry setting  just to make sure I'm looking at the correct installation 'HKEY_LOCAL_MACHINE', 'SOFTWAREMicrosoftMicrosoft SQL Server90ToolsClientSetup', 'SQLPath' The three ssrs2005 instances are in three different physical servers and the problem is with all of them so it is not an isolated incident. I've dbowner rights to all three servers. The server versions are 9.0.4060, 9.0.4035 and 9.0.4053
I found some dead-end threads regarding this issue but have not seen a clean solution.
Utilizing a Reporting Services security extension, I can't find a way of obtaining the reports name or identity from within the CheckAccess() method so I can use it to query an external database to ascertain authorization. In other words, my company requires the creation of custom roles that can be used from within our ASP application and well as being honored by SQL Reporting Services 2005.
If anyone can help, I would really appreciate your time!
Thanks in advance,
Tom
Hi there,
I've just developed this big report in RS SQL 2000 that includes 6 subreports (repeated for each item in the database) and that should print some 800 pages. A light version of the report that only queries part of the data (about 10%, for testing purposes) run with success, including all subreports in about 15 minutes. Once I try to test the report with all the data (all subreports and the main report query directly from the cube in AS), it fails under three different scenarios:
1st: The timeout setting is left as the default 1800 seconds. After half an hour the report gets partially displayed and the subreports that were not processed within the 30 minutes period display only "The subreport data could not be displayed".
2nd: The timeout value is set not to time out. After about 2 hours, the report fails ("The page cannot be displayed"). I checked all log files and the only one I could identify as related to this was the following:
SQL Server Scheduled Job 'ReportScheduler_CreateJobs' (0x4A64EE6822172C478B4DBF1E385699D6) - Status: Failed - Invoked on: 2006-01-09 13:00:00 - Message: The job failed. The Job was invoked by Schedule 1 (DailyRun). The last step to run was step 1 (spc_sched_CreateJobs).
3rd: Tried to export the file to PDF instead of rendering as HTML. I got the message on the page "Action Cancelled" and an IE message box displaying a "Permission Denied" error.
I've tried many things and ran out of ideas. If anyone could give me any suggestions, I'd greatly appreciate it.
Thanks,
Érico Maia
Hi,
We just started to use Reporting Services in integrated mode (SQL Server 2005, MOSS 2007). The huge problem is we unable to build models of big databases:
"Server was unable to process request. ---> The operation has timed out "
The process teminates correctly if database is small enouth to finish model building under appoximatly 100 sec. Curently I increased timeout values in site and RS service config files:
rsreportserver.config:
<Add Key="SQLCommandTimeoutSeconds" Value="2400"/>
<Add Key="DatabaseQueryTimeout" Value="9000"/>
site web.config :
<httpRuntime maxRequestLength="51200" executionTimeout="9000" />
Still having same problem. Any suggestions where I can find that 100 sec value? Please help.
Has anyone encounted a problem with Reporting Services (2005) with the following scenario:
A report with a dropdown parameter allowing a Select All choice -
If the selection list is fairly long and Select All is selected - if the user clicks the View Report button the selection list is completely reset (i.e. all items are unselected). This seems to happen if the user quickly clicks the View Report button immediately after clicking the Select All box on the parameter dropdown.
This happens inconsistently - some users experience it frequently while others do not see it at all (using the same parameter values, etc.)