How To Increment SSIS Variable (Date)
Apr 11, 2008
My requirement demands me to use a extract based on a date. And on success i need to increment this date by a day.
So i have a declared two variables, vDate and vSourceSQL. I am using the sql statement from variable in the data access method. My package is successful.
Reading through the forum and after following this blog
http://blogs.conchango.com/jamiethomson/archive/2005/02/09/SSIS_3A00_-Writing-to-a-variable-from-a-script-task.aspx
i now have a script task which will increment my "vDate" variable and i am calling it as a post execute task. I have posted the error below. Tried to get atleast the sample provided to succeed, but.... this is what i get.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "Flat File Destination" (800)" wrote 12 rows.
Error: 0xC001405C at Script Task Data Flow Task: A deadlock was detected while trying to lock variables "User::vMyVar" for read/write access. A lock cannot be acquired after 16 attempts. The locks timed out.
Error: 0xC001405D at Script Task Data Flow Task: A deadlock was detected while trying to lock variables "System::InteractiveMode" for read access and variables "User::vMyVar" for read/write access. A lock cannot be acquired after 16 attempts. The locks timed out.
Error: 0x2 at Script Task Data Flow Task: The script threw an exception: A deadlock was detected while trying to lock variables "User::vMyVar" for read/write access. A lock cannot be acquired after 16 attempts. The locks timed out.
Task failed: Script Task Data Flow Task
Warning: 0x80019002 at OnPostExecute: The Execution method succeeded, but the number of errors raised (5) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Warning: 0x80019002 at SqlCommandFromVariable: The Execution method succeeded, but the number of errors raised (5) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "SqlCommandFromVariable.dtsx" finished: Failure.
The program '[2316] SqlCommandFromVariable.dtsx: DTS' has exited with code 0 (0x0).
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
View 7 Replies
ADVERTISEMENT
May 7, 2015
I need to create a variable expression that will be passing yesterday's date to a sql command but when I create the variable there is only the datetime datatype, how can I trim the time portion from this expression to get the date portion :
DATEADD( "day", - 1 , GETDATE() )
View 5 Replies
View Related
Feb 5, 2015
I am using vs 2010 and I have an .xls file that I am trying to import into SQL Server 2012, and I have most of it figured out, but I have a date field that is giving me problems, and what I would like to do is put that date in a variable so I can add it to every record in my SQL Table.
I am using a SQL Task Editor with an excel connection and I have no problem getting other data from the excel document and putting into my variable, its just the date that I have problems.
View 0 Replies
View Related
Jul 19, 2007
Hi,
How do I increment the value of a variable? let's say from initial value of var1 = 0 it becomes 1
Thanks!
cherriesh
View 8 Replies
View Related
Oct 6, 2015
As part of my package, i require a date (Only date, not DateTime) which is 10 months previous to get date.Eg: for today if the package executes, then i want 12/1/2014 , which i will use in my package as a filter like 'where date='?' where ? is a paramter which is is derived from the above logic
So, I have a project parameter @ppdate with value as -10. I create a variable with DateTime (because there is NO date type for SSIS) and gives the expression as below
dateadd("Month",@ppdate, DATEADD("D",-(DAY(GETDATE()))+1,GETDATE())) , I am getting '7/1/2011 11:33:38 AM' which i don't want - i want only '12/1/2014'. How can i get it?
To get '12/01/2014', If i change the variable from DateTime to string, then i think i cant use the value in the filter condition like ''where date='?' because this does not accept string. Is this correct?
View 3 Replies
View Related
May 5, 2008
I have an asp.net with C# code behind page that displays the following. The information
is being pulled from an SQL database. Each row that is above 7:10am is highlighted.:
EntryDate EntryTime Employee4/25/08 7:05:56 AM
Scot 4/25/08 7:11:02 AM Rick 4/26/08
9:05:00 AM Jen 4/27/08 8:05:16 AM
Mel 4/27/08 7:15:06 AM
Bill 4/28/08 5:00:55 AM Scot I want to have a static variable for each employee called lateScot, lateJen, lateMel, lateRick, lateBill. For each row that is highlighted, I want to increment the counter of the employee by one. I am using the RowDataBound event to highlight as needed. But how can I use the SqlDataSource1_Selecting event to go through the and increment as needed based on highlighted rows? protected void SqlDataSource1_Selecting(object sender, SqlDataSourceSelectingEventArgs e) { }protected void GridView1_RowDataBound(object sender, GridViewRowEventArgs e) { if (e.Row.RowType == DataControlRowType.DataRow) { string grr = e.Row.Cells[2].Text; DateTime ontime = Convert.ToDateTime(e.Row.Cells[1].Text); DateTime late = Convert.ToDateTime("12/30/1899 7:10:00 AM"); if (ontime.TimeOfDay >= late.TimeOfDay && grr != "Mailman,Mailman" && grr != "Moses,Bill" && grr != "Bathroom,Women's" && grr != "Bathroom,Men's" && grr != "Sharm,Tonmoy") { e.Row.BackColor = System.Drawing.Color.Firebrick; e.Row.ForeColor = System.Drawing.Color.White; } } } Thanks in advance,Scot
View 3 Replies
View Related
Oct 31, 2007
This is on SQL 2000 and 2005. I need to increment a variable on insert, but am having a hard time getting a workable solution:
declare @var int
set @var = (select max(id) from table1)
insert into table1
select val1,
@var +1 as val2
from table2
where blah and blah and blah
If I were trying to insert val1's of (5, 10, 20) with @var having an initial value of 100, the added rows should be:
val1 val2
5 101
10 102
20 103
Does anyone know how to do this without temp tables (or table variables)?
View 5 Replies
View Related
Jul 30, 2007
Hi,
Is there a way to auto-increment by date in a data-driven subrscription? I only see a few options and increment by date is not one of them? If not, does anyone have a workaround to publish reports that are increment by date?
Thanks,
J
View 4 Replies
View Related
Jun 26, 2007
I have a Primary Key column that I would like to have formatted as follows: 'yyyymmdd[auto increment]' . I would also like the auto increment to restart at the beginning of a new month. Any idea's on how to achieve this?
Thanks
View 2 Replies
View Related
Apr 5, 2014
I have a table with 4 fields,
Startdate, rec_num , recursive_value, recursive_date
04/02/2014 3 d 04/02/2014
04/02/2014 3 d 04/02/2014
04/02/2014 3 d 04/02/2014
I will like to update recursive_date to emulate the recursive_number and recursive_value fields which specify every 3 days. The recursive_value field can also be w to specify weeks, m to specify month or y to specify years.
So my value in the recursive_date field should be updated as followed
Startdate, rec_number , recursive_value, recursive_date
04/02/2014 3 d 04/02/2014
04/02/2014 3 d 04/05/2014
04/02/2014 3 d 04/08/2014
View 19 Replies
View Related
Oct 22, 2015
I am trying to load previous days data at 3 am via a SSIS job.
The Date variable is initiated as DATEADD("dd",-1, GETDATE()) in the for loop.
Now, as this job runs at 3 am, and I set the variable as GETDATE() - 1, it excluded the data from 12 am to 3 am in the resultset as Date is set as YYYY-MM-DD 03:00:00:000 I need this to be set as YYYY-MM-DD 00:00:00:000
How can i do this?
View 2 Replies
View Related
Dec 8, 2006
I have a (1) date field and (2) an auto-incrementing ID field that always throw me errors when I'm doing a programmatic insert.
(1) After doing many searches on the subject, I don't think I'm using the correct syntax for the date and can't find any suggestion that works. Would appreciate your knowledge on correct SQL syntax for inserting a "today's date" field.
(2) I'm using the following code to create a new auto-incrementing ID for each record but it seems that there should be a smoother method to force the field's value to auto-increment. Any ideas?
Private objCmd As SqlCommand Private strConn As New SqlConnection(ConfigurationManager.AppSettings("conn"))...objCmd = New SqlCommand("select max(ClientID) from tblClients", strConn)Dim intClientID As Int16 = objCmd.ExecuteNonQuery + 1
View 5 Replies
View Related
Jul 1, 2015
I have a client data which has the candidate id, a start date which will have only the date in varchar format and a time value associated to that date in varchar format in a seperate column.
To give a brief explanation about the data a candidate will come to study center at any time point in a day for example 10:00 AM on 20-10-2014. The start date will be 20-10-2014 and from 10:00 AM he will have test based on the time point. So if the time point is 2 HR, then at 12:00 PM he will have a test. If the time point is 8 HR, it will get added with 10:00 AM and based on this he will have the test at 06:00 PM. When the timepoint reaches 00:00 the start date needs to be the next date instead of 20-10-2014.
The start date needs to be appended with the time value such that when it crosses over the time 00:00, the start date needs to get increased by 1 ie the next day. I have added the start date to the time by using the code below
CAST(STARTDATE as datetime) + CAST(CAST(STUFF([TIME],3,0,':') as time(0)) as datetime) as [EXPECTEDDATETIME]
By this above code i have created the expected datetime however
I will not be able to hardcode the value due to dynamic data. I tried to apply >= and < to the time value something like
case when MyTime >= '00:00' and MyTime < '08:10' the Dateadd(day, 1, date)
This works perfect but my concern is that I cannot put the value 08:10 because it will not a constant value for all rows.
I have provided a screenshot of my data and a expected date column for reference.
Candidate StartDateStartTimeExpected DateTime Timepoint
1 20141020 1000 2014-10-20 10:00:00 0 HR
1 201410201200 2014-10-20 12:00:00 02 HR
1 201410201400 2014-10-20 14:00:00 04 HR
1 201410201800 2014-10-20 18:00:00 08 HR
1 201410200000 2014-10-21 00:00:00 12 HR
1 201410201200 2014-10-21 12:00:00 24 HR
2 20141020 1100 2014-10-20 11:00:00 0 HR
[Code] ....
I have also attached the data for reference.
View 9 Replies
View Related
Sep 20, 2007
Hello,
I have a little problem with SQL Server 2005. I have chosen the option "auto-increment" for a column which includes the primary key. Moreover, I turned the option "Ignore double values" on. I get the datasets from a SSIS-Import-project. Unfortunately, the ID is getting incremented even if there are double values.
For example:
The first entries in the table have the IDs: 1, 2, 3, 4, 5
Then I start the SSIS-project which tries to write the first 5 entries again in the database. Of course, the entries do not appear again in the db but a new entry gets the ID 11 instead of 6. Is there a setting, that the ID won't get incremented if there double values?
Thanks
M-l-G
View 1 Replies
View Related
Apr 27, 2006
Hello there.
I've just upgraded from using DTS to SSIS. I've run through a few tutorials and am starting to use to the new ways of working.
There are however two task that I'm not really sure how to tackle, can someone suggest the best method in SSIS.
1) The destination table has many FK's. I'd like the package to check that the input data does not violate the FK's and use a default value for the columns where a violation occurs.
2) I need to increment a value in the package as a source column for use as the Primary Key field in the destination insert. It would be an added bonus if I could find out the maximum key used in the destination table already so that I can set my counter for this field at that value + 1.
Regards
Spangeman
View 1 Replies
View Related
Oct 25, 2006
I'm working on an SSIS package that uses a vb.net script to grab some XML from a webservice (I'd explain why I'm not using a web service task here, but I'd just get angry), and I wish to then assign the XML string to a package variable which then gets sent along to a DataFlow Task that contains an XML Source that points at said variable. when I copy the XML string into the variable value in the script, if do a quickwatch on the variable (as in Dts.Variable("MyXML").value) it looks as though the new value has been copied to the variable, but when I step out of that task and look at the package explorer the variable is its original value.
I think the problem is that the dataflow XML source has a lock on the variable and so the script task isn't affecting it. Does anyone have any experience with this kind of problem, or know a workaround?
View 1 Replies
View Related
Mar 6, 2008
I have a SQL Task that updates running totals on a record inserted using a Data Flow Task. The package runs without error, but the actual row does not calculate the running totals. I suspect that the inserted record is not committed until the package completes and the SQL Task is seeing the previous record as the current. Here is the code in the SQL Task:
DECLARE @DV INT;
SET @DV = (SELECT MAX(DateValue) FROM tblTG);
DECLARE @PV INT;
SET @PV = @DV - 1;
I've not been successful in passing a SSIS global variable to a declared parameter, but is it possible to do this:
DECLARE @DV INT;
SET @DV = ?;
DECLARE @PV INT;
SET @PV = @DV - 1;
I have almost 50 references to these parameters in the query so a substitution would be helpful.
Dan
View 4 Replies
View Related
Oct 9, 2001
Hello,
I run the DTS to copy data from Progress to SQL Server. How can match/convert the date variables to check.
The field p-date as format 'mm-dd-year' . It has the value of 10/09/2001.
The field s-date as varchar format. It has the value 2001-10-09.
How can use the where condition ( Select ...... WHERE p-date = s-date.)
Thanks
View 1 Replies
View Related
Feb 27, 2008
I'm new to SSIS, but have been programming in SQL and ASP.Net for several years. In Visual Studio 2005 Team Edition I've created an SSIS that imports data from a flat file into the database. The original process worked, but did not check the creation date of the import file. I've been asked to add logic that will check that date and verify that it's more recent than a value stored in the database before the import process executes.
Here are the task steps.
[Execute SQL Task] - Run a stored procedure that checks to see if the import is running. If so, stop execution. Otherwise, proceed to the next step.
[Execute SQL Task] - Log an entry to a table indicating that the import has started.
[Script Task] - Get the create date for the current flat file via the reference provided in the file connection manager. Assign that date to a global value (FileCreateDate) and pass it to the next step. This works.
[Execute SQL Task] - Compare this file date with the last file create date in the database. This is where the process breaks. This step depends on 2 variables defined at a global level. The first is FileCreateDate, which gets set in step 3. The second is a global variable named IsNewFile. That variable needs to be set in this step based on what the stored procedure this step calls finds out on the database. Precedence constraints direct behavior to the next proper node according to the TRUE/FALSE setting of IsNewFile.
If IsNewFile is FALSE, direct the process to a step that enters a log entry to a table and conclude execution of the SSIS.
If IsNewFile is TRUE, proceed with the import. There are 5 other subsequent steps that follow this decision, but since those work they are not relevant to this post.
Here is the stored procedure that Step 4 is calling. You can see that I experimented with using and not using the OUTPUT option. I really don't care if it returns the value as an OUTPUT or as a field in a recordset. All I care about is getting that value back from the stored procedure so this node in the decision tree can point the flow in the correct direction.
CREATE PROCEDURE [dbo].[p_CheckImportFileCreateDate]
/*
The SSIS package passes the FileCreateDate parameter to this procedure, which then compares that parameter with the date saved in tbl_ImportFileCreateDate.
If the date is newer (or if there is no date), it updates the field in that table and returns a TRUE IsNewFile bit value in a recordset.
Otherwise it returns a FALSE value in the IsNewFile column.
Example:
exec p_CheckImportFileCreateDate 'GL Account Import', '2/27/2008 9:24 AM', 0
*/
@ProcessName varchar(50)
, @FileCreateDate datetime
, @IsNewFile bit OUTPUT
AS
SET NOCOUNT ON
--DECLARE @IsNewFile bit
DECLARE @CreateDateInTable datetime
SELECT @CreateDateInTable = FileCreateDate FROM tbl_ImportFileCreateDate WHERE ProcessName = @ProcessName
IF EXISTS (SELECT ProcessName FROM tbl_ImportFileCreateDate WHERE ProcessName = @ProcessName)
BEGIN
-- The process exists in tbl_ImportFileCreateDate. Compare the create dates.
IF (@FileCreateDate > @CreateDateInTable)
BEGIN
-- This is a newer file date. Update the table and set @IsNewFile to TRUE.
UPDATE tbl_ImportFileCreateDate
SET FileCreateDate = @FileCreateDate
WHERE ProcessName = @ProcessName
SET @IsNewFile = 1
END
ELSE
BEGIN
-- The file date is the same or older.
SET @IsNewFile = 0
END
END
ELSE
BEGIN
-- This is a new process for tbl_ImportFileCreateDate. Add a record to that table and set @IsNewFile to TRUE.
INSERT INTO tbl_ImportFileCreateDate (ProcessName, FileCreateDate)
VALUES (@ProcessName, @FileCreateDate)
SET @IsNewFile = 1
END
SELECT @IsNewFile
The relevant Global Variables in the package are defined as follows:
Name : Scope : Date Type : Value
FileCreateDate : (Package Name) : DateType : 1/1/2000
IsNewFile : (Package Name) : Boolean : False
Setting the properties in the "Execute SQL Task Editor" has been the difficult part of this. Here are the settings.
General
Name = Compare Last File Create Date
Description = Compares the create date of the current file with a value in tbl_ImportFileCreateDate.
TimeOut = 0
CodePage = 1252
ResultSet = None
ConnectionType = OLE DB
Connection = MyServerDataBase
SQLSourceType = Direct input
IsQueryStoredProcedure = False
BypassPrepare = True
I tried several SQL statements, suspecting it's a syntax issue. All of these failed, but with different error messages. These are the 2 most recent attempts based on posts I was able to locate.
SQLStatement = exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
SQLStatement = exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
Parameter Mapping
Variable Name = User::FileCreateDate, Direction = Input, DataType = DATE, Parameter Name = 0, Parameter Size = -1
Variable Name = User::IsNewFile, Direction = Output, DataType = BYTE, Parameter Name = 1, Parameter Size = -1
Result Set is empty.
Expressions is empty.
When I run this in debug mode with this SQL statement ...
exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
... the following error message appears.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Import data from flat file to tbl_GLImport, DTS.Pipeline: Validation phase is beginning.
Error: 0xC002F210 at Compare Last File Create Date, Execute SQL Task: Executing the query "exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output" failed with the following error: "No value given for one or more required parameters.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Compare Last File Create Date
Warning: 0x80019002 at GLImport: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "MyPackage.dtsx" finished: Failure.
When the above is run tbl_ImportFileCreateDate does not get updated, so it's failing at some point when calling the procedure.
When I run this in debug mode with this SQL statement ...
exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
... the tbl_ImportFileCreateDate table gets updated. So I know that data piece is working, but then it fails with the following message.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Import data from flat file to tbl_GLImport, DTS.Pipeline: Validation phase is beginning.
Error: 0xC001F009 at GLImport: The type of the value being assigned to variable "User::IsNewFile" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
Error: 0xC002F210 at Compare Last File Create Date, Execute SQL Task: Executing the query "exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output" failed with the following error: "The type of the value being assigned to variable "User::IsNewFile" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Compare Last File Create Date
Warning: 0x80019002 at GLImport: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "MyPackage.dtsx" finished: Failure.
The IsNewFile global variable is scoped at the package level and has a Boolean data type, and the Output parameter in the stored procedure is defined as a Bit. So what gives?
The "Possible Failure Reasons" message is so generic that it's been useless to me. And I've been unable to find any examples online that explain how to do what I'm attempting. This would seem to be a very common task. My suspicion is that one or more of the settings in that Execute SQL Task node is bad. Or that there is some cryptic, undocumented reason that this is failing.
Thanks for your help.
View 5 Replies
View Related
Jul 29, 2015
I have a table T with columns Code datatype is nvarchar(5) andName nvarchar(30). Table T has 100 records and column Name only have data and column Code has Null values.
I have to generate csv files using this table data through SSIS . Each file should have 25 records and assign some static value(different for each file ex: file1 is T1 and file2 is T2..etc) in column Code . I am able to generate files with 25 records for each file but not able to assign different static value in different csv files. Is it possible using SSIS?
View 2 Replies
View Related
Dec 11, 2007
Hello,
I Have a table that needs to have 2 unique number.
detail_id and detail_print_id.
detail_id is already an IDENTITY.
both fields need to be different, because when importing, it imports the same data into a table twice, with only a slight data change (and id is not one of the changes).
So I thought i could do the following:
detail_id INT NOT NULL IDENTITY(1,2),
detail_print_id INT NOT NULL IDENTITY(2,2),
--blah blah
that way, the detail_id will always be odd, and the detail_print_id will always be even. however SQL Server 2005 only allows 1 identity per table, and both these fields need to be auto generated when the field is inserted, so as to prevent double data.
is there anyway I can create a int column to auto increment, without the column being an IDENTITY??
also, I would prefer to not have to create a second table with a single column just for this work.
Thanks,
Justin
View 5 Replies
View Related
Jun 15, 2015
i have a excel file in which i have a date column it having the below date formats below
Install Date
20140721
31.07.2014
07.04.2015
20150108
20140811
20150216
7/21/2014
11.08.2014
07.08.2014
So using SSIS how we would load this date column into the table into one format like dd/mm/yyyy or any single date format
View 6 Replies
View Related
Jan 8, 2001
I'm still having a problem getting a select statement to work. I have posted the script on a web site, along with the table definitions, and sample output at the bottom. The problem is when I set @total_debits, I get 0 instead of 11580.95. I think the problem is that the format of the @end_date or the @balance_date is the problem. Please take a look at it. I posted a question on Friday about this, and tried to give a "snippet" and mistyped it. So here it is. Please give me all feed back.
Script at http://www.pschallenge.com/sql_problem.html
Thanks,
Brian
View 1 Replies
View Related
Sep 19, 2014
I have two tables that I am pulling data from: an item table and a sales table. Almost all of the information comes from the item table (item description, location, amount on hand). The last field wanted is Year-To-Date sales. I can pull the sales field from the sales table, which gives me all sales from the creation of the db. I need to be able to run a date variable of This Year on that sales field only. I have a date field I can reference off of in the sales table.
View 6 Replies
View Related
Mar 8, 2006
Hi,I am trying to join two tables, one has multiple records per ID, theother is unique record per ID.The two tables look like belowAID date var1 var 2001 1/1 10 20001 2/1 12 15001 3/1 17 18002 2/1 13 10002 3/1 12 14............BID001002003004....The join conditions are1. table A's ID = table B's ID2. take the variables associated with the 1st occrrence of the datevariable in table A'sI have the following SQL code but the it didn't work. It says thecolumns are ambiguously defined. Anyone can help me? Greatly appreciateit!PROC SQL;CONNECT TO ORACLE (USER="&user" PASS="&pass" PATH="@POWH17"BUFFSIZE=25000);CREATE TABLE actvy1_1st AS SELECT * FROM CONNECTION TO ORACLE(SELECTactvy1.ID,actvy1.var1,actvy1.var2,actvy1.datefromA actvy1,(select a.ID,min(a.date) mindatefrom A a,B cwhere a.ID =c.IDgroup by ID) bwhere actvy1.ID =b.IDand actvy1.date =b.mindateorder by ID);disconnect from oracle;quit;
View 3 Replies
View Related
May 6, 2008
Hi,
How can I delete records from one table using date variable condition?
or should I use string?
here is the sql : DELETE FROM TABLE WHERE DATE = @VARIABLE
View 1 Replies
View Related
Jul 5, 2007
My client will upload a file to a FTP folder regularly, but the time patten is unknown, only thing i know is he'll use today's date as the file name. for example, he uploaded a file 'wk070705_id.txt' today, but i don't know when the next file will be uploaded. so how can i write a package like, eveytime when he upload a new file (for example if he upload a file 'wk070708_id.txt'), i can import the data into my table? i am a very newbie of SSIS, it would be perfect if i can get a full script for this. thanks in advance with appreciation!
ps: the date in file name is yymmdd
View 3 Replies
View Related
Mar 12, 2007
Hi,
I've searched quite a bit for help with this syntax but have given up.
I need help with the where clause of a query using SQL SERVER that selects records a certain number of days before the current date. I have tried this and it's incorrect syntax:
WHERE (fldDate < ({ fn NOW() - 500 })
Can someone please help me out with correct syntax for this? thanks much.
View 3 Replies
View Related
Feb 1, 2006
Hi all can you help me, I know that I am doing some thing wrong. What I need to do is set a variable to the current date so I can use it in a SQL query to an access database. This is what I have so far
<script runat="server"">
Sub Page_Load
dim --all the variables for my sql connections--
dim ff1 As Date
then my sql connection and queries
sql="SELECT FullRate, " & ff1 &" FROM table1 WHERE hotelnumber = " & hotel
This works is I set ff1 as a string and specify the string (my column headings are set as dates in my table)
dim ff1 As string
ff1="30/01/2006"
but I need ff1 to be the current date and is I use ff1 As date it returns time and date
Is there any way to set ff1 to the current date in this format "dd/mm/yyyy"
Any help is greatly appreciated
View 2 Replies
View Related
Dec 16, 2014
i have a monthly production script that requires two forms of the prior month's date.'yyyymm' or '201411' and 'yyyy-mm-dd' or '2014-11-01'. The second date must have a day value of '1'. I have to use these date values in my script a half dozen times. Ive tried to declare two variables to accomodate but i can not get them correct.
I can execute the following:
SELECT LEFT(CONVERT(varchar, DATEADD(MONTH,-1,GetDate()),112),6)
---------------------------
201411
When I try this as a declared variable:
DECLARE @RPT_DTA VARCHAR
SET @RPT_DTA = CONVERT(varchar, DATEADD(MONTH,-1,GetDate()),112)
SELECT @RPT_DTA
--------------------------
2
DECLARE @RPT_DTB VARCHAR
SET @RPT_DTB = DATEPART(YEAR,DATEADD(MONTH,-1,GetDate())) + DATEPART(month,DATEADD(MONTH,-1,GetDate()))
SELECT @RPT_DTB
-----------------------------
*
View 3 Replies
View Related
Jun 10, 2015
I need building the dynamic sql . When I create below script and executed the procedure passing the table name and date values its giving me error saying "Incorrect syntax near '>'".
Create PROCEDURE sampleprocedure
@tablename AS VARCHAR(4000),
@date as date
AS
BEGIN
declare @table varchar(1000)
[Code] ....
View 9 Replies
View Related
Jan 1, 2014
I want to pass a couple of date variables in British date format to a function
Here's the function
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[code]....
View 7 Replies
View Related
Sep 12, 2006
I have a package variable that is a datetime... how am I able to set the time of that variable? In visual studio on the variables screen if I click on value it brings up a calendar control - I can't seem to edit the time portion of the variable.
When I first click open the variables window it will say 9/1/2006 12:00:00 AM - but as soon as I click on the value box the 12:00:00 AM part will disappear and I can't edit it. I've tried on someone elses PC as well to make sure there isn't something wrong with my visual studio
Ideas?
View 4 Replies
View Related
