How To Invoke SSIS Package As A Webservice
May 31, 2007Hi Guys,
Anyone can tell me, How to invoke ssis package as webservice ?
Is it possible ? If yes How ?
Yogesh V. Desai. | SQLDBA|
ADVERTISEMENT
SSIS Invoke Procedure In Oracle Package
Feb 6, 2008Hello there,
I'am asking you people if it's possible to invoke procedure, functions in package in Oracle database > 9.X with SSIS package...
Thx for your incoming answers
Regards,
KiK2k1
Can SSIS Package Be Run From WebService?
Feb 15, 2006Dear,
Can SSIS package be run from WebService?
P.S. SSIS package and Webservice are located in the same computer.
Thanks much!
Integration Services :: SSIS Package With Webservice As Destination
Oct 25, 2010I have a table is SQL server database A that is my source. I have another database B which is accessed via webservice call.(its a CRM server basically). My intention is to transfer data from A to B while B is accessible only via web service. I need to update existing one and create the missing one.
Currently I am using script component, and on every insertion of a row, i call the webservice to check if the record exist or not. If it exist I update it else create it using webservice call itself.
All this happen in Input0_ProcessInputRow(Input0Buffer Row) function.
Now this method is making 2n webserive call which is making the performance very slow.
Â
I want to optimize the approach. Is there a way where I can retrieve whole set of rows in source table in preexecute(), filter it and store it in a List. This way, i just need to check the list a perform update ro create accordingly preventing my webservice call.
How to optimize this or even some better approach?
Its actually a CRM server and I am trying to update and create contacts in CRM sync with a database.
How To Invoke DTS Package From A Stored Procedure
Jan 15, 2001I have a DTS Package to populate data from excel sheet to direct simple table. I like to call this DTS from User interface. thanks in advance
View 2 Replies View RelatedIS IT Possbile To Invoke DATASTAGE (oracle Package) Job In Dot Net .
Sep 21, 2006Hi ,
Anyone help me. Now we can do Invoke SSIS Package into ASp.NET.
Vice versa
Is there Possbile to invoke Datastage (oracle Job) into ASp.net? . Is already created in Oracle DataStage Server. it call or access through Dot net. Is it possble? Please any one help me.
Thanks & Regards,
Jeyakumar.M
chennai
Configured Child Packages - Invoke Without Waiting For Package Completion?
Apr 4, 2007I want to set multiple child packages running without waiting for them to complete in a parent SSIS package. The catch is that I will be running the same child package in multiple threads with different configuration variables set. I want to drive the config variables for the child packages via a SQL Server table, and start the execution of each child package from within a for-loop container.
Here's what I've tried, and why it didn't work:
1) Execute package task. Didn't work: Waits for the child package to complete before moving to the next step.
2) Kicking off the package via the "sp_start_job" stored proc in the msdn db. Didn't work: Can't specify config variable values.
3) Using the DTExec command line prompt. Didn't work: Same issue as 1). Waits for the package to complete.
Anything I'm missing? Any ideas on how to accomplish this?
Invoke SSIS From Client-side Batchfile
Oct 9, 2007Until now we worked with SQL Server 7.0, now we're migrating to SQL Server 2005.
With SQL Server 7.0 we had an MS Access application (located on a file server) used by several users, from which's form a batchfile (located on the same server) can be started. The Batchfile deletes an existing TXT-file called import_result.txt, then invokes a DTS-Package (located on a SQL Database server) which imports data to the Access-DB and creates a new file with the result of the DTS-execution (again called import_result.txt). Like that the user gets some information about success (or failure) of the data import.
How could this be implemented with SQL Server 2005 without having to install (and to licencse) SQL Express Engine on the clients? I found some threads about how to invoke an SQL Agent Job from the client to execute the SSIS-Package on the server, but I think that's not exactly what we need. Besides I'm not quite sure how exactly the SQL Agent Job could be invoked from Access.
Do you have any proposals?
Meicee
WCF Webservice Through SSIS
Apr 30, 2008Hi
I need to populate a table B by selecting a from table A but for every single record selected from Table A for some of the feilds i need to pass it to a WCF webservice and do some tasks.
Can somebody show me an example of this i am completely clueless on how to invoke a WCF webservice for every single row fetched from a database.
A step by step example would be of great help.
regards
Hrishy
SSIS To Run A Webservice Times Out
Oct 24, 2006We have a package that runs a webservice. The webservice connects to exchange for multiple mail accounts so it sometimes takes awhile to run.
If run from SQL Server Management Studio, it usually completes, but may occassionally time out.
If run from a job (i.e. we want this scheduled) then it NEVER completes successfully - althought there is very little information about what the error was. It seems to fail too quickly to be a time out error...
Any idea why this is happening? Or how to prevent it from timing out? Is there a way to initiate the webservice asynchronously from SSIS?
Returning Data From Webservice To SSIS
Jul 14, 2007Hello,
I am trying to use the data returned by a webservice that our application team has built.
What method should they use to return the data to the caller ?
If they try to retun a data set the SSIS is saying that it is not a well formated XML.
The webservice is using an API call to HIS, can I make this call using C# or some other mechanisam directly from SSIS?
Server Error : Launching SSIS Using A Webservice And Asp.net
Jan 16, 2007Hey guys,
I have a webservice set up on the same box where my SSIS packages sit at. I have an ASP.net app which calls the webservice. The webservice in turn invokes the ssis package and , I run it on file system.
i keep getting this error
System.Web.Services.Protocols.SoapException was unhandled by user code
Message="Server was unable to process request. ---> That assembly does not allow partially trusted callers."
Source="System.Web.Services"
Actor=""
Lang=""
Node=""
Role=""
StackTrace:
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at CallDummyWebServ.com.bls.cmndev2.LaunchSSISPackageServiceCS.LaunchPackage(String sourceType, String sourceLocation, String packageName) in D:ProjectsCallDummyWebServCallDummyWebServWeb Referencescom.bls.cmndev2Reference.cs:line 78
at CallDummyWebServ._Default.btnSayHello_Click(Object sender, EventArgs e) in D:ProjectsCallDummyWebServCallDummyWebServDefault.aspx.cs:line 26
at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I tried to set up the impersonation on both the asp.net 2.0 config and web.config .. but the problem is stil haunting me .. any help or suggestions would be greatly appreciated.
Integration Services :: Calling Webservice In SSIS Through Script Task
Jun 29, 2015I am searching for a solution for Calling or consume a web service in SSIS through Script task. I have gone through so many links but i am able to find the exact solution. I am getting so many references, though i am unable to crack it.
My requirement is i need to call a web service URL through script task which is having a client certificate. When we are trying to connect to the URL it will ask for the certificate authentication. After calling this URL we will get a WSDL file from the web service, We need to consume that WSDL file and we need to identify the methods inside this WSDL and need to write the data available in this WSDL to the data base tables.
How can we call that web service URL( With certificate) through script task and how can we read the WSDL file and How we can load the data into DB table.
How To Invoke C# Code From SSIS? Can We Script In C# For Script Task?
Aug 5, 2005How to invoke C# code from SSIS?
View 22 Replies View RelatedJob Running SSIS Package Keeps Failing But The SSIS Package By Itself Runs Perfectly Fine
Aug 30, 2006Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
Error While Executing SSIS Package From Other SSIS Package
Jan 10, 2007Hi,
In our project we have two SSIS package.
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
Can anybody please suggest how to handle it?
Passing Execute DTS Package Result (success/failure) To Calling SSIS Package
Mar 6, 2008I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
Error Stating Package Failure While Executing SSIS Package In Standard Edition
Feb 2, 2007Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
Several Different Errors When Creating And Running SSIS Package. Package Runs Successfuly Sometimes.
May 2, 2008Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
Is It Possible To Change Or Replace The Default Package Template Named New SSIS Package?
Feb 21, 2008I would like to standardize SSIS development so that developers all start with the same basic template. I have set it up so it is an available template ( http://support.microsoft.com/kb/908018 ) but I would like it to be the default when a new project or package is created. Is this an option?
View 4 Replies View RelatedSQL 2012 :: How To Capture Data Flow Component Name Dynamically While Package SSIS Package Is Executing
Jun 3, 2014I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
View 5 Replies View RelatedProblem When Running A SSIS Master-package-child Package On Non Default Sql-server Instance
Dec 6, 2007Hi there
We have a SSIS run which runs as follows
The master package has a configuration file, specifying the connect strings
The master package passes these connect-strings to the child packages in a variable
Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s.
We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.
The package is run from the file system, through a job-schedule.
We experience the following when running on a not default sql-server instance (called dkms5253uedw)
Case 1:
The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.
The master package then executes the first child package. We then in the sysdtslog get:
Error - €ścannot connect to database xxx€?
Info - €śpackage is preparing to get connection string from parent €¦€?
The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.
Case 2:
When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.
Case 3:
When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.
Case 4:
When we then stop the sql-server on the default instance, the package faults again, this time with
Error - €śtimeout when connect to database xxx€?
Info - €śpackage is preparing to get connection string from parent €¦€?
And the continues as in the first case
From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).
We have tried delayed validation in the packages and in the connection managers, but with the same results (error).
So we are desperately hoping that someone can help us solve this problem.
Thanx,
/Nils M - Copenhagen
Passing Value From A Child Package To The Parent Package That Calls It In Ssis
May 21, 2007hi,
I am interested in Passing value from a child Package variable to the Parent package that calls it in ssis.
I am able to call the Child package using the execute package task and use Configurations to pass values from the parent variable to the child, but I am not able to pass the value from the child to the parent.
I have a variable called datasetId in both the parent and child. it gets computed in the child and needs to be passed to the parent...
Any suggestions?
Thanks for any help in advance..
smathew
Report With SSIS Package Having Indirect Package Configuration Setup
Sep 10, 2007Deployed Report having SSIS package as source do not work when Indirect Package configuration is used in ETL package. It seems ETL package when called/executed from Report manager does not recognize environment variable to pick up the dtsconfig file.
The Report works when Direct package configuration is used to same dtsconfig file.
What could be the reason? Any solution for this? This will cause our build/deployment to QA and Prod very difficult.
How To Compose The Connection String Of A SSIS Package That Execute Another Package?
Jul 6, 2006Dear All,
I now have two SSIS package, "TESTING" and "LOADING". The "TESTING" package have an execute package task that call the "LOADING" package. When I want to execute the TESTING package, how can I setup the connection string so that I can edit the password of the database connected by the "LOADING" package?
Regards,
Strike
SSIS Parent Package Can Not Find The Child Package
Oct 13, 2007I have two SSIS packages in a project, one calling the other. The parent package works fine in my local mechine. After they are deployed to the production, I schedeul jobs to run the packages in the SqlServer. The child package works fine if I run it alone, but the parent package could not find its child package if I run the parent package . As I checked, all xml config files and the connection string pointing to the child package were set correctly. It seems the parent package did not use the xml config file. Can someone help me? Thanks in advance.
View 9 Replies View RelatedSchedule A SSIS Package Which Execute DTS 2000 Package
Mar 25, 2008
I have successfully created a SSIS package which execute a DTS 2000 package and with no problem to execute the task. But I failed to schedule this package. I was not success in setting the logging. When running the package in command line:
dtexec file "C:Documents and SettingslyangMy DocumentsVisual Studio 2005ProjectsTraingDTSTraingDTSDTSTraining.dtsx"
Error: 2008-03-24 08:03:24.36
Code: 0xC0012024
Source: Execute DTS 2000 Package Task
Description: The task "Execute DTS 2000 Package Task" cannot run on this edit
ion of Integration Services. It requires a higher level edition.
End Error
Warning: 2008-03-24 08:03:24.38
Code: 0x80019002
Source: DTSTraining
Description: The Execution method succeeded, but the number of errors raised
(2) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the M
aximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Any help will be greatly appreciated.
(32 bit machine, standartd edition of SQL 2005)
Problem Setting Package Variables In SSIS Package
Sep 8, 2006Hi,
I am making use of the DtUtil tool to deploy my package to SQL Server.
Following is my configuration:
32-bit machine and 32-bit named instance of Yukon.
I have some package variables which need to be set in the code.
Previously I did it as follows:
Set the package variables in the code. For example:
pkgFile.Variables["User::DestinationServerName"].Value = <myvalue>
Deploy the package as follows:
applnObj.SaveToSqlServer(pkgFile, null,
destinationServer, null, null);
Here the package was successfully deployed and when i open those packages using BIDS, I am able to see that the variables are set to the values as doen in teh code.
Because of oen problem I am not using SaveToSQLServer method. So I switched to DTUtil tool.
Now I am doing it this way:
Set the package variables as before.
Deploy the package to SQL Server using DTUtil tool.
Now is the problem:
The package is successfully deployed. But the variables are not set to the value that I have specified in the code.
I also tried DTexec utility to set the package variable. Even that does n't work.
Can anyone help me out? Is there any alternate method to set package variables?
Thanks,
Sandhya
SSIS Package Failing As A Job, But Getting Successful When Run As Package
Nov 6, 2007when i run the job using network service account credentials job is failing. But when i run the package individually, it is tasting success. when it runs as job, this is the error message i am getting
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I have changed to 32-Bit run time and ran the excel package, even then it is failing...i tried to use my credentials (i am admin on the box), even then it is failing...please suggest
Out Of Process SP Invoke
Dec 25, 2007Team:
How to invoke a stored procedure "out of process", meaning i want to add it to a queue.
Reason: we have a proc that is fired real-time each time an order comes into the system and it take a few seconds and when there is plenty of order activity in the system, the process times out. I would like to essentially add this to a queue and move on and some other process will process from the queue. Is CLR call the way to do? I know that the easiest way can be to add to a table and process from the table every 5 mins or something like that. Thoughts?
Thx
Sri
Running Ssis Package With Ssis Run Time Compoenents And Sql Server 2000...
Jan 22, 2007running ssis package with ssis run time compoenents and sql server 2000...
Is it possible to run ssis packages that point to servers on sql server 2000
without installing sql server 2005 ?
Can we just install runtime for ssis and run the packages ?
Please explian with links if possible
thanks a lot
Integration Services :: Executing Child SSIS Package In Parent SSIS
Oct 9, 2015I want to achieve the following in (SSIS/SSDT for SQL 2012) -Â
I have a generic SSIS package which simply sends out email notifications using SMTP email task (this package is within its own project, and has project level input parameters).
I need to be able to call this package in the Event handler section of every package (numbering in about less than 60) that we have. These packages are within their own respective projects.
I thought I could use the "execute package task", but it turns out , using this, I cannot call a package that is part of some other project. I also cannot call a package that is stored in the CATALOG. Is there any way I can do this ?
When I call the child package , I should be able to send in parameters like - error information and package name of the Parent package.
SSIS Called From Agent Job Not Calling New Child SSIS Package Addition
Oct 29, 2007I have an SSIS package (TransAgentMaster) that I recently modified to include a call to a child package via the file system. The child package creates a text file. When I run the package in dev studio then the child package/text file is produced.
I then imported the TransAgentMaster as a stored packagesfilesystem package into SQL SSIS and executed the package. The child package produced the text file.
I then ran the SQL Server Agent to see if the child package would work and it did not generate the text file. Thus after updating a SSIS package importing the package into SSIS the job that calls the package will not call the child package. Please not that the TransAgentMaster package calls 7 children packages €¦ just not my new one.
Any thoughts why the agent will not run the child newly crated childe package?