How To Launch Programatically A SSIS Package?
May 22, 2006
Dear all,
I wrote this post others times but the answer did not satisfied so that I'd like to know if really anyone has ever used or experienced with this possibility. No by .Net language rather than Vb 6.0 or ASP or even instanciacing DMO library.
According this link http://support.microsoft.com/?kbid=817248 it seems possible but I haven't idea if possible keeping in mind that it has been made by yourself no for others... So that, I mean, these assemblies comes along with Sql Server 2005 installation.
Thanks a lot for your support,
View 13 Replies
ADVERTISEMENT
May 18, 2006
Dear all,
I am looking for any snippet of code where you can launch a SSIS package by DMO or VB 6.0. I read that it was posible to call dts.runtime assembly from VB 6.0 but at first it might be converted or something like that.
Issue comes from the moment that we€™ve got an ASP 3.0 scheduler for hundreds of dts and now we have to migrate them to sql25k.
Thanks in advance for any info regarding this,
View 5 Replies
View Related
Jun 27, 2007
Is it possible to launch an SSIS package after a SQL event takes place? I need to run a package after a customer order is placed. Can a trigger in SQL launch the package?
View 1 Replies
View Related
Oct 22, 2007
Hi,
I created a SSIS Package programatically based on the few threads here in this forum. This package just has a data flow task, during data transfer for every 1000 rows or so I want to update the status in a table in the database.
How do I achieve this?
As of now I just have a source and a destination, no transformations in between the flow. I'm not sure if rowcount will help, when I tried it using a onprogress even handler it always showed up as zero.
Thanks
View 6 Replies
View Related
Jan 29, 2008
Hi Everyone:
Is it possible to create a package through the SQL Server Business Intelligence Studio, and then execute that package through an Excel file (by calling the package through VBA?).
I need some advice on the ways I can execute the package other than via command line utilities. Can you use Visual Basic 6.0? .NET?
Please advise,
Jason
View 5 Replies
View Related
Aug 18, 2006
does anyone know an easy way (or any way for that matter) to run a DTS package from an asp.net page?
View 1 Replies
View Related
Mar 13, 2006
Hi all,
I'm trying to launch a SIS package from a VBA macro in excel...now I launch the dtexec.exe from a shell but a have this error:
Started: 10.14.33
Could not load package "Package1" because of error 0xC0014062.
Description: The LoadFromSQLServer method has encountered OLE DB error code 0x80004005 (Login timeout expired). The SQL statement that was issued has failed.
Source:
Started: 10.14.33
Finished: 10.14.49
Elapsed: 16.594 seconds
but all credential are correct...
any ideas ???
thanks in advance
Wolly
View 3 Replies
View Related
Oct 10, 2006
Hi all. How can I create a Stored Procedure that will launch a DTS package that I have already built dynamically ?
I have a string already built and I need to put it in a SP because my application is php (linux) and the database is SQL Server on a Windows machine.
I will use php to execute the stored proc, which is the only way to access it.
My string looks like this :
C:Progra~1Micros~380ToolsBinnISQL.EXE -S [MyServer] -U [Username] -P [Password] -Q "ISQL_Batch 'D:DDFIImporteIMPICAFI.bat [user] [Schema] [Pwd] '" -n -d [database]
(Words in [] are only to show that I will put other values)
Thanks
CFGilles
View 2 Replies
View Related
May 20, 2006
I'm developing a Windows Service to watch for an e-mail and then launch a package. It extracts some parameters from the e-mail that I then need to pass to the package. What is the best way to launch the package from the service? Should I run it in a new thread? I don't want the service to have to wait for the package to complete. How would I pass the parameters? Should I use dtexec? If the service fails or is stopped and the package is still running, it would terminate the package also, correct? Any way to avoid that? Thanks.
View 3 Replies
View Related
Jan 9, 2001
I have prepared several DTS packages which must be launched by a custom external application. What is the best way to provide access to this application? What are the minimum security requirements? Currently, they are local packages; I understand that some utility is offered by saving them as .DTS files, but I don't know the pros & cons. Are there advantages to using the Repository? The app should be able to do its work from a different box on the same network as the server. (Ultra-super-secret security isn't an issue, but I don't want to have give our developers sa-level access unless necessary.)
View 2 Replies
View Related
Oct 4, 2006
Please help. I'm completely new to SSIS, and I was hoping someone could point me in the right direction(s).
I am developing a winforms client app, and I need to be able to provide the user with the ability to import data in CSV format into our application's database.
I'd like to use SSIS if possible, as long as what I am trying to do isn't near impossible.
I'm thinking of a UI where the user can specify a flat file (CSV) to upload and be processed by an SSIS package on a remote database server.
This package will be responsible for validating the CSV file and inserting data into the database as appropriate.
Is there a way I can:
launch an SSIS package remotely, from a winforms app on the client machine that is not running SQL server (preferably asynchronously) -- and pass it some parameters, including the import file itself
(optionally) provide progress feedback to the client pc to let them know it is being processed
display a nice SSRS report on the client upon completion that tells them exactly what the success/failure of the import was (how many rows processed, which ones failed and why, etc)
Any helpful examples, links, etc would be most appreciated.
Thanks in advance!
View 1 Replies
View Related
Mar 11, 2008
I want to launch an SSRS report from within SSIS, save the results as an excel fiile and then send it to a user.
Can this be done?
If so, can someone point me in the right direction?
Thanks.
View 5 Replies
View Related
Jan 25, 2007
Hi,
I am programmatically creating a package and for executing the package i say "Package.Execute()".
Likewise,is there any method exposed which programatically stops the package execution?
Thanks in advance,
Suganya
View 5 Replies
View Related
Dec 11, 2006
Hi,
I need to add two oledbcommand tranformations in my package.
i add the commands like this:
-----------------------------------------
this.OledbCommand1 = this.dataflow.ComponentMetaDataCollection.New();
this.OledbCommand1.ComponentClassID = "DTSTransform.OleDBCommand.1";
this.OledbCommand1.Name = "ChangingColumnAttribute";
this.OledbCommand1.Description = "ChangingColumnAttribute";
CManagedComponentWrapper oledbinstance = this.OledbCommand1.Instantiate();
oledbinstance.ProvideComponentProperties();
------------------------------------------------------------
this.OledbCommand2 = this.dataflow.ComponentMetaDataCollection.New();
this.OledbCommand2.ComponentClassID = "DTSTransform.OleDBCommand.1";
this.OledbCommand2.Description = "UpdateHistoryColumnAttribute";
OledbCommand2.Name = "OleDBCommand2";
CManagedComponentWrapper oledbinstance1 = this.OledbCommand2.Instantiate();
oledbinstance1.ProvideComponentProperties();
-------------------------------------------------------------------------------------------------------------
i get the following error message during package validation:
OnError
ErrorCode -1073451000
Source DataFlow
SubComponent DTS.Pipeline
Description The package contains two objects with the duplicate name of "compone
nt "OLE DB Command" (719)" and "component "OLE DB Command" (701)".
Please advice.
View 5 Replies
View Related
Jan 25, 2008
I've put together a SSIS package that, once a user uploads an Excel spreadsheet from a webpage, grabs it, does a mess of calculations and spits it out into a datareader (this last part is tricky, but I haven't even gotten to this point yet). In BIDS, the package works fine. Run using the 32-bit version of dtexec, it runs fine. But when I try to call it from the page, I keep getting an error. The errors look familiar enough that I'm thinking it's due to the package trying to run 64-bit, and that not playing nicely with Excel. If that's true, is there an easy way to force the 32-but version to be used? I've already set the project properties to Run64BitRuntime = false, which I'd hoped would help. but no luck.
Here's the code I'm using:
Code Snippet
string pkg = @"pathpackage.dtsx";
Application app = new Application();
Package p = app.LoadPackage(p, null);
Variable varFileName = p.Variables["strExcelFileName"];
varFileName.Vaue = strFileName;
Variable varFilePath = p.Variables["strExcelFilePath"];
varFilePath.Value = strFilePath;
DTSExecResult dte = p.Execute();
Error handling
p.Dispose();
And it kicks out the following:
-1071636471
TestReports_UploadTestReport
Connection manager "Excel Connection Manager"
Microsoft.SqlServer.Dts.Runtime.DtsError0{8BDFE898-E9D8-4D23-9739-DA807BCDC2AC}
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
-1071611876
DFT - Upload spreadsheet to dataset
Excel Source [1]
Microsoft.SqlServer.Dts.Runtime.DtsError0dtsmsg.rll{8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
-1073450985
DFT - Upload spreadsheet to dataset
DTS.Pipeline
Microsoft.SqlServer.Dts.Runtime.DtsError0dtsmsg.rll{8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}
component "Excel Source" (1) failed validation and returned error code 0xC020801C.
-1073450996
DFT - Upload spreadsheet to dataset
DTS.Pipeline
Microsoft.SqlServer.Dts.Runtime.DtsError0dtsmsg.rll{8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}
One or more component failed validation.
-1073594105
DFT - Upload spreadsheet to dataset
View 3 Replies
View Related
Oct 22, 2007
Hi,
I have .NEt web application where i have to tranfer large number of records (50,000 to 1,00,000) from one DB to another DB.I want to use ssis pacakge to do this task , but my requirement is to build this ssis pacakge dynamically using .NET framework.
Is it possible to develop SSIS pacakge from scratch using .net programming?
Suggest me any other alternative options if you have ?
Thanks,
Vaishali
View 5 Replies
View Related
Apr 28, 2008
hi all,
I am developing an application in C# which creates SSIS package programatically.These packages perform various activities like transfering data from one server to another,extract data from table,transfering data from sql to msaccess etc.Here I am using the following code to get the description of the SSIS errorcode.
Code Snippet
Public static String GetErrMesg(IDTSComponentMetaData90 MD,Exception Err)
{
try
{
COMException comEx=Err as COMException;
return MD.GetErrorDescription(comEx.ErrorCode);
}
Catch
{
return Err.Message;
}
For example if the error code is 0xC0204018,the application shows its equivalent description as
"The "%1!s!" has a precision that is not valid. The precision must be between %2!ld! and %3!ld! "
But the actual error message is "The Output column "fund" has a precision that is not valid. The precision must be between 1 and 18"
My question is how to show more descriptive error message..like how to replace "%1!s!" to the actual field.
Please give ur suggestions...
View 1 Replies
View Related
Aug 30, 2006
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
View 7 Replies
View Related
Jan 10, 2007
Hi,
In our project we have two SSIS package.
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
Can anybody please suggest how to handle it?
View 4 Replies
View Related
Mar 6, 2008
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
View 5 Replies
View Related
Feb 2, 2007
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
View 1 Replies
View Related
May 2, 2008
Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
View 4 Replies
View Related
Feb 21, 2008
I would like to standardize SSIS development so that developers all start with the same basic template. I have set it up so it is an available template ( http://support.microsoft.com/kb/908018 ) but I would like it to be the default when a new project or package is created. Is this an option?
View 4 Replies
View Related
Jun 3, 2014
I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
View 5 Replies
View Related
Dec 6, 2007
Hi there
We have a SSIS run which runs as follows
The master package has a configuration file, specifying the connect strings
The master package passes these connect-strings to the child packages in a variable
Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s.
We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.
The package is run from the file system, through a job-schedule.
We experience the following when running on a not default sql-server instance (called dkms5253uedw)
Case 1:
The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.
The master package then executes the first child package. We then in the sysdtslog get:
Error - €œcannot connect to database xxx€?
Info - €œpackage is preparing to get connection string from parent €¦€?
The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.
Case 2:
When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.
Case 3:
When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.
Case 4:
When we then stop the sql-server on the default instance, the package faults again, this time with
Error - €œtimeout when connect to database xxx€?
Info - €œpackage is preparing to get connection string from parent €¦€?
And the continues as in the first case
From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).
We have tried delayed validation in the packages and in the connection managers, but with the same results (error).
So we are desperately hoping that someone can help us solve this problem.
Thanx,
/Nils M - Copenhagen
View 3 Replies
View Related
May 21, 2007
hi,
I am interested in Passing value from a child Package variable to the Parent package that calls it in ssis.
I am able to call the Child package using the execute package task and use Configurations to pass values from the parent variable to the child, but I am not able to pass the value from the child to the parent.
I have a variable called datasetId in both the parent and child. it gets computed in the child and needs to be passed to the parent...
Any suggestions?
Thanks for any help in advance..
smathew
View 8 Replies
View Related
Sep 10, 2007
Deployed Report having SSIS package as source do not work when Indirect Package configuration is used in ETL package. It seems ETL package when called/executed from Report manager does not recognize environment variable to pick up the dtsconfig file.
The Report works when Direct package configuration is used to same dtsconfig file.
What could be the reason? Any solution for this? This will cause our build/deployment to QA and Prod very difficult.
View 1 Replies
View Related
Jul 6, 2006
Dear All,
I now have two SSIS package, "TESTING" and "LOADING". The "TESTING" package have an execute package task that call the "LOADING" package. When I want to execute the TESTING package, how can I setup the connection string so that I can edit the password of the database connected by the "LOADING" package?
Regards,
Strike
View 8 Replies
View Related
Oct 13, 2007
I have two SSIS packages in a project, one calling the other. The parent package works fine in my local mechine. After they are deployed to the production, I schedeul jobs to run the packages in the SqlServer. The child package works fine if I run it alone, but the parent package could not find its child package if I run the parent package . As I checked, all xml config files and the connection string pointing to the child package were set correctly. It seems the parent package did not use the xml config file. Can someone help me? Thanks in advance.
View 9 Replies
View Related
Mar 25, 2008
I have successfully created a SSIS package which execute a DTS 2000 package and with no problem to execute the task. But I failed to schedule this package. I was not success in setting the logging. When running the package in command line:
dtexec file "C:Documents and SettingslyangMy DocumentsVisual Studio 2005ProjectsTraingDTSTraingDTSDTSTraining.dtsx"
Error: 2008-03-24 08:03:24.36
Code: 0xC0012024
Source: Execute DTS 2000 Package Task
Description: The task "Execute DTS 2000 Package Task" cannot run on this edit
ion of Integration Services. It requires a higher level edition.
End Error
Warning: 2008-03-24 08:03:24.38
Code: 0x80019002
Source: DTSTraining
Description: The Execution method succeeded, but the number of errors raised
(2) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the M
aximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Any help will be greatly appreciated.
(32 bit machine, standartd edition of SQL 2005)
View 7 Replies
View Related
Sep 8, 2006
Hi,
I am making use of the DtUtil tool to deploy my package to SQL Server.
Following is my configuration:
32-bit machine and 32-bit named instance of Yukon.
I have some package variables which need to be set in the code.
Previously I did it as follows:
Set the package variables in the code. For example:
pkgFile.Variables["User::DestinationServerName"].Value = <myvalue>
Deploy the package as follows:
applnObj.SaveToSqlServer(pkgFile, null,
destinationServer, null, null);
Here the package was successfully deployed and when i open those packages using BIDS, I am able to see that the variables are set to the values as doen in teh code.
Because of oen problem I am not using SaveToSQLServer method. So I switched to DTUtil tool.
Now I am doing it this way:
Set the package variables as before.
Deploy the package to SQL Server using DTUtil tool.
Now is the problem:
The package is successfully deployed. But the variables are not set to the value that I have specified in the code.
I also tried DTexec utility to set the package variable. Even that does n't work.
Can anyone help me out? Is there any alternate method to set package variables?
Thanks,
Sandhya
View 8 Replies
View Related
Nov 6, 2007
when i run the job using network service account credentials job is failing. But when i run the package individually, it is tasting success. when it runs as job, this is the error message i am getting
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I have changed to 32-Bit run time and ran the excel package, even then it is failing...i tried to use my credentials (i am admin on the box), even then it is failing...please suggest
View 1 Replies
View Related
Jan 22, 2007
running ssis package with ssis run time compoenents and sql server 2000...
Is it possible to run ssis packages that point to servers on sql server 2000
without installing sql server 2005 ?
Can we just install runtime for ssis and run the packages ?
Please explian with links if possible
thanks a lot
View 18 Replies
View Related
