hi,
I want to know how to optimise this query, the results almost reach 6000 rows, I want to speed this query.
condition2=Select Distinct A,B,B+C+D,E,F,G From a.table where condition1 order by A,B,B+C+D,E,F,G
Select Sum(amount) From b.table where condition2 And date=datetime.
Thanks in advance.
Hello All,
I have a query that I could use some help with. I would like to see how I could make this query more optimised. I am not hte best at Joins so if someone could help me with this that would be great. Right now its taking about 24-30 secs to run which is a no go. Im wondering if some kind of join would work better?
thank you much
-jes
SELECTrecipes_signed_up_for.user_id,
recipes_signed_up_for.recipe_id,
recipes_signed_up_for.use_in_lesson_plan AS use_in_lesson_plan,
recipes_signed_up_for.attached_lesson_plan AS attached_lesson_plan,
recipes_signed_up_for.participate,
recipes_signed_up_for.authorized AS authorized,
recipes_signed_up_for.date_signed_up_for AS date_signed_up_for,
users.user_id,
users.f_name AS f_name,
users.l_name AS l_name,
users.email_address AS email_address,
users.primary_phone AS primary_phone,
recipes.recipe_name AS recipe_name,
recipes.recipe_id AS recipe_id,
recipes.number_served AS number_served,
recipes.last_day_to_sign_up_for AS last_day_to_sign_up_for,
recipes.recipe_instructions AS recipe_instructions,
recipes.active_recipe,
recipe_ingredients.recipe_ingredient_id,
recipe_ingredients.recipe_id,
recipe_ingredients.ingredient_id,
recipe_ingredients.ingredient_quantity AS ingredient_quantity,
recipe_ingredients.ingredient_unit,
recipe_ingredients.active_ingredient AS active_ingredient,
ingredients.ingredient_id,
ingredients.ingredient AS ingredient_name,
recipes_signed_up_for_ingredients_needed.ingredient_id,
recipes_signed_up_for_ingredients_needed.ingredient_needed AS ingredient_needed
FROMrecipes, recipe_ingredients, ingredients, recipes_signed_up_for_ingredients_needed, recipes_signed_up_for, users, locations, regions
WHERErecipes.recipe_id = recipe_ingredients.recipe_id
AND recipe_ingredients.ingredient_id = ingredients.ingredient_id
AND recipes_signed_up_for_ingredients_needed.user_id = #url.user_id#
AND recipes_signed_up_for_ingredients_needed.ingredient_id = recipe_ingredients.ingredient_id
AND recipes_signed_up_for_ingredients_needed.ingredient_needed = 1
AND recipes.recipe_id = recipes_signed_up_for.recipe_id
AND recipes_signed_up_for.user_id = users.user_id
AND recipes_signed_up_for.user_id = #URL.user_id#
AND recipes_signed_up_for.participate = 1
AND locations.region_id = regions.region_id
AND recipes_signed_up_for.recipe_id IN (SELECTrecipe_id
FROMrecipes
WHEREactive_recipe = 1)
ORDER BY recipes.recipe_name
Hi guysIs there any way I can run this query faster? Should I take out the ORDER BYclause? This is supposed to return 17,000 rows and takes around 30 minutes orso. Is there no way at all to get this result faster?select r.AttorneyName, r.sitename, r.applicationid, r.clientsurname, r.clientinitials, r.clientidno, r.grantedamount, r.bankname,r.accountnumber, r.status, r.grantdate, r.consultantname, r.propertyaddress,r.erfdescription, r.commenthistory, br.expectedregdatefrom bondtrak..rptdetail rjoin ebondprd..bankresponse bron br.applicationid = r.applicationidwherer.rundate = '20051010'and r.primarybankind = 'Y'and r.status = 'granted'and r.statusdate between '20020101' and '20050930'and r.businessunit in ('bond choice', 'ppl')order by r.sitename, r.consultantname, r.statusdateThanks for any help.Driesen--Message posted via SQLMonster.comhttp://www.sqlmonster.com/Uwe/Forum...eneral/200510/1
View 6 Replies View RelatedI have these 3 queries - they are the same except each fetches record countsfor one of 3 different record types, nSubsets (type 0), nAssets (type 1) andnImages (type 2). Is there any way I could get all 3 of these (based on theNode.Type integer) with a single query?IF @Error = 0BEGINSELECT @nSubsets = COUNT(*)FROM NodeINNER JOIN AdjacencyON Adjacency.ID_Node = Node.IDWHERE Adjacency.Path LIKE @nodepath + '%'ANDNode.Type = 0SET @Error = @ERRORENDIF @Error = 0BEGINSELECT @nAssets = COUNT(*)FROM NodeINNER JOIN AdjacencyON Adjacency.ID_Node = Node.IDWHERE Adjacency.Path LIKE @nodepath + '%'ANDNode.Type = 1SET @Error = @ERRORENDIF @Error = 0BEGINSELECT @nImages = COUNT(*)FROM NodeINNER JOIN AdjacencyON Adjacency.ID_Node = Node.IDWHERE Adjacency.Path LIKE @nodepath + '%'ANDNode.Type = 2SET @Error = @ERROREND
View 5 Replies View RelatedHi,
I use this piece of code in a trigger to check if new entered row has unique order number in the given year:
IF EXISTS
(
SELECT COUNT(*)
FROM SPD_Orders
GROUP BY ORD_Year, ORD_Number
HAVING COUNT(*) <> 1
)
RAISERROR('Order with this No exists in given year, 11, 1)
but this code causes deadlocks in my database.
Any suggestions how can I change it to avoid these deadlock?
1. Some constrain? If yes, so how to write it?
2. Index like to enable query optimiser to change execution plan?
CREATE NONCLUSTERED INDEX [_dta_index_SPD_Orders_10_1429580131__K8_K7] ON [dbo].[SPD_Orders]
(
[ORD_Year] ASC,
[ORD_Number] ASC
3. Same index as above but unique and then I will not have to use this trigger, cause database itself with return an error?
4. Any other, the best solution ?
Please help.
Thanks.
Przemo
Ok I have the following SQL, I have a subquery in the SELECT part but also the same subquery in the WHERE part as well.What I'm trying to do is get all parents that have children OR get all parents with no children OR just get all parents regardless (@HasResponses is a BIT that can be 1, 0 or null). At the same time I want to count the total number of children in the select list, but I'm having to copy the same subquery in the SELECT and WHERE parts which doesn't seem terribly optimal to me (maybe it is, that's why I'm asking). I've tried referencing the column alias in the select list (AS [Responses]) for the where part (@HasResponses = 0 AND [Responses] = 0), but it doesn't seem to work.Is this the most optimal way to do it? Is there a better way? I'm working with SQL Server 2005.SELECTf.FeedbackText AS [Feedback Comment],u.Name AS [Feedback Author],f.CreatedDate AS [Created On],(SELECT COUNT(*)FROM FeedbackResponse frWHERE fr.FeedbackID = f.ID) AS [Responses]FROM Feedback fINNER JOIN [User] u ON f.StaffID = u.StaffIDWHERE f.CreatedDate >= @DateFromAND f.CreatedDate <= @DateToAND(@HasResponses IS NULLOR(@HasResponses = 1 AND(SELECT COUNT(*)FROM FeedbackResponse frWHERE fr.FeedbackID = f.ID) > 0)OR(@HasResponses = 0 AND(SELECT COUNT(*)FROM FeedbackResponse frWHERE fr.FeedbackID = f.ID) = 0))
View 2 Replies View RelatedHi,
Please can you help me,
I have created an database with 3 fields
Hi,
Please can you help me,
I have created an database with 3 indexed (not clustered) fields
key : bytes 100
error : integer
status : bytes 6
I would like to know how to import 3 million or more records quickly.
If I don't index the the fields, the operation takes 3 hours. With indexed fields it takes overnight. Therefore, how can i optomise the import operation from a .txt file.
Thanks and regards.
Hi, please excuse me if this seems like a daft or badly formed question.
A colleage mentioned that when constructing the where clause in a query that it was important what order the criteria were entered. They weren't sure themsleves but the idea was that starting from the bottom of the query you should add the criteria that will have the effect of reducing the data the most and then work 'up' the query back to the from clause.
As a dodgy example, if you have a staff table and you want to run a specific query on all staff over 75 that are male, then:
where gender = "male"
and age >- 75
The reasoning being that the age criteria would reduce the size of the data being worked on more than the gender criteria.
It's been a while since I've had to look at intermediate tables etc but i'm pretty sure this suggestion will not make any difference to the performance of a query.
Thanks,
Matt
Hello,
If i want to optimise stored procedure response time.
Which things i need to be considered?
Thanks in advance.
Have built tables with stitistical data (very large)in SQL Server 2000
All with 2 fields in common: "Node" and "Datestamp"
At the moment none is indexed.
Tables will have joins added in Business Objects Universe.
How do I know if adding indicis would improve speed of queries?
And if so how are these best added?
Do all tables need indicis or just some?
What does it mean to Optimise the db above adding Index columns?
Can the DB be made optimise itself automatically?
Any prompts very appreciated,
Gezza
I'm running a query, actually its an insert that works when using the TSQL below.
However when I try to use the debugger to step through and using the exact same values as those below I get the following error:
[Microsoft][ODBC SQL Server Driver]Invalid character value for cast specification
Its Killing me because everything else works, but this. Can somebody help.
DECLARE @NoteID INT,-- NULL OUTPUT,
@Note_Description NVARCHAR(3000),-- = NULL,
@Date DateTime,-- = NULL OUTPUT,
@ByWho NVARCHAR(30),-- = NULL,
@FK_Action_Performed NVARCHAR(40),-- = NULL,
@FK_UserID INT,-- = NULL,
@FK_JobID INT,-- = NULL,
@Job_Date DateTime,-- = NULL,
@Start DateTime,-- = NULL,
@Finish DateTime,-- = NULL,
@BeenRead NVARCHAR(10),-- = NULL
@FK_UserIDList NVARCHAR(4000)-- = NULL
--SET @NoteID = 409 --NULL OUTPUT,
SET @Note_Description = 'Tetsing'
--SET @Date DateTime = NULL OUTPUT,
SET @ByWho = 'GeorgeAgaian'
SET @FK_Action_Performed = 'Worked hard'
SET @FK_UserID = 5
SET @FK_JobID = 29
SET @Job_Date = 28/01/03
SET @Start = '1:00:20 PM'
SET @Finish = '1:00:20 PM'
SET @BeenRead = 'UnRead'
SET @FK_UserIDList = '1,2,3'
--AS
--SET NOCOUNT ON
SET NOCOUNT ON
SET XACT_ABORT ON
BEGIN TRANSACTION
SET @Date = GETDATE()
-- Insert Values into the customer table
INSERT Note (Note_Description,
Date,
ByWho,
FK_Action_Performed,
FK_UserID,
FK_JobID,
Job_Date,
Start,
Finish)
SELECT --@NoteID,
@Note_Description,
@Date,
@ByWho,
@FK_Action_Performed,
@FK_UserID,
@FK_JobID,
@Job_Date,
@Start,
@Finish
-- Get the new Customer Identifier, return as OUTPUT param
SELECT @NoteID = @@IDENTITY
-- Insert new notes for all the users that the note pertains to, in this case this will be by the assigned
-- users.
IF @FK_UserIDList IS NOT NULL
EXECUTE spInsertNotesByAssignedUsers @NoteID, @FK_UserIDList
-- Insert New Address record
-- Retrieve Address reference into @AddressId
-- EXEC spInsertForUserNote
-- @FK_UserID,
--@NoteID,
-- @BeenRead
-- @Fax,
-- @PKId,
-- @AddressId OUTPUT
COMMIT TRANSACTION
--------------------------------------------------
GO
ok can someone tell me why i get two different answers for the same query. (looking for last day of month for a given date)
SELECT DATEADD(ms, - 3, DATEADD(mm, DATEDIFF(m, 0, CAST('12/20/2006' AS datetime)) + 1, 0)) AS Expr1
FROM testsupplierSCNCR
I am getting the result of 01/01/2007
but in query analizer I get the result of
12/31/2006
Why the different dates
Hi,
I get this error dialog when I try to open all the rows of any table from Enterprise manager..
Any help would be really appreciated..
Thanks,
-Srini.
SQL Server 2005 9.0.3161 on Win 2k3 R2
I receive the following error:
"Error: 8624, Severity: 16, State: 1 Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services."
I have traced this to an insert statement that executes as part of a stored procedure.
INSERT INTO ledger (journal__id, account__id,account_recv_info__id,amount)
VALUES (@journal_id, @acct_id, @acct_recv_id, @amount)
There is also an auto-increment column called id. There are FK contraints on all of the columns ending in "__id". I have found that if I remove the contraint on account__id the procedure will execute without error. None of the other constraints seem to make a difference. Of course I don't want to remove this key because it is important to the database integrity and should not be causing problems, but apparently it confuses the optimizer.
Also, the strange thing is that I can get the procedure to execute without error when I run it directly through management studio, but I receive the error when executing from .NET code or anything using ODBC (Access).
Hey, i've written a query to search a database dependant on variables chosen by user etc etc. Opened up a new sqldatasource, entered the query shown below and went on to the test query page. Entered some test variables, everything works as it should do. Try to get it to show in a datagrid on a webpage - nothing. No data shows.
SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches
FROM dbo.MAKES INNER JOIN
dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN
dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN
dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN
dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID
WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) )
GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID
HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2
ORDER BY count(*) DESC
Here is the page source
<%@ Page Language="VB" MasterPageFile="~/MasterPage.master" Title="Untitled Page" %>
<asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>"
SelectCommand="	SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches 	FROM dbo.MAKES INNER JOIN 				 dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN 				 dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN 				 dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN 				 dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID 	WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) ) 	GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID 	HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2 	ORDER BY count(*) DESC ">
<SelectParameters>
<asp:ControlParameter ControlID="DropDownList1" Name="ATT_ID1" PropertyName="SelectedValue" />
<asp:ControlParameter ControlID="TextBox1" Name="VAL1" PropertyName="Text" />
<asp:Parameter Name="ATT_ID2" />
<asp:Parameter Name="VAL2" />
<asp:Parameter Name="ATT_ID3" />
<asp:Parameter Name="VAL3" />
<asp:Parameter Name="ATT_ID4" />
<asp:Parameter Name="VAL4" />
</SelectParameters>
</asp:SqlDataSource>
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>"
SelectCommand="SELECT * FROM [ATTRIBUTES]"></asp:SqlDataSource>
<br />
<asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource2"
DataTextField="ATTRIBUTE_NAME" DataValueField="ATTRIBUTE_ID">
</asp:DropDownList>
<asp:TextBox ID="TextBox1" runat="server" AutoPostBack="True"></asp:TextBox><br />
<br />
<br />
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="DERIVATIVE_ID"
DataSourceID="SqlDataSource1">
<Columns>
<asp:BoundField DataField="DERIVATIVE_ID" HeaderText="DERIVATIVE_ID" InsertVisible="False"
ReadOnly="True" SortExpression="DERIVATIVE_ID" />
<asp:BoundField DataField="Matches" HeaderText="Matches" ReadOnly="True" SortExpression="Matches" />
</Columns>
</asp:GridView>
</asp:Content>
AFAIK I have configured the source to pick up the dropdownlist value and the textbox value (the text box is autopostback).
Am i not submitting the data correctly? (It worked with a simple query...just not with this one). I have tried a stored procedure which works when testing just not when its live on a webpage.
Please help!
(Visual Web Devleoper 2005 Express and SQL Server Management Studio Express)
I have the following code.
SELECT _bvSerialMasterFull.SerialNumber, _bvSerialMasterFull.SNStockLink, _bvSerialMasterFull.SNDateLMove, _bvSerialMasterFull.CurrentLoc,
_bvSerialMasterFull.CurrentAccLink, _bvSerialMasterFull.StockCode, _bvSerialMasterFull.CurrentAccount, _bvSerialMasterFull.CurrentLocationDesc,
_bvSerialNumbersFull.SNTxDate, _bvSerialNumbersFull.SNTxReference, _bvSerialNumbersFull.SNTrCodeID, _bvSerialNumbersFull.SNTransType,
_bvSerialNumbersFull.SNWarehouseID, _bvSerialNumbersFull.TransAccount, _bvSerialNumbersFull.TransTypeDesc,
[code]...
However, as you can see, the original select query is run twice and joined together.What I was hoping for is this to be done in the original query without the need to duplicate the original query.
I'm trying to find the command to open up an odbc conection inside sql2005 express. I only have ues of an odbc connector, we're conection to remedy. We will eventually be using stored procedures to extract the data we need from remedy and doing additional data crunching. I'm a foxpro programmer so once I get the correct syntax for making the odbc connector I shold be ok. Also I need a really good advanced book on sql2005. The type of book that would have my odbc answer. I've spent all morning trying to find this information and was unable to.
Thanks in advance
Daniel Buchanan.
If this was the wrong forum to post this on, please move this question to the correct one. I need this answer soon.
We have a issue with a MDS server that have been over us for a couple of days, the original error msg from SQL Server Engine is the one "The query processor could not produce a query plan" but the ones we get on the Excel-Addin are "Sequece contains no elements" or "The value cannot be null" T
• Using Microsoft SQL Server 2012 (SP1) - 11.0.3393.0 (X64) for 6months on this server without issues
• Two weeks ago we started to have 2 errors: "Sequence Contains No Elements" | "The Value Cannot Be Null"
• We are using the last version of Excel Add-in
• We try to reinstall the MDS feature
• If I backup/restore MDS database to other server it works
• We updated to SQL 2012 SP2 + CU4 but the error persisted ...
Looking at the MDSTraceLog we are routed to the this msg
SQL Error Debug Info: Number: 8624, Message: Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services., Server: bbdvsql03inst01, Proc: udpMetadataEntityGetDetailsXML, Line: 28
At line 28 udpMetadataEntityGetDetailsXML is calling udfMetadataEntityGetDetailsXML … and here is where we stopped
** Error found when try to get data from a entity using Excel add-in **
===================================
Sequence contains no elements
------------------------------
Program Location:
at Microsoft.MasterDataServices.AsyncEssentials.AsyncResultBase.EndInvoke()
at Microsoft.MasterDataServices.ExcelAddInCore.AsyncProviderBase`1.EndOperation(IAsyncResult ar)
[code]....
how do I get the variables in the cursor, set statement, to NOT update the temp table with the value of the variable ? I want it to pull a date, not the column name stored in the variable...
create table #temptable (columname varchar(150), columnheader varchar(150), earliestdate varchar(120), mostrecentdate varchar(120))
insert into #temptable
SELECT ColumnName, headername, '', '' FROM eddsdbo.[ArtifactViewField] WHERE ItemListType = 'DateTime' AND ArtifactTypeID = 10
--column name
declare @cname varchar(30)
[code]...
-- The 3rd query uses an incorrect column name in a sub-query and succeeds but rows are incorrectly qualified. This is very DANGEROUS!!!
-- The issue exists is in 2008 R2, 2012 and 2014 and is "By Design"
set nocount on
go
if object_id('tempdb.dbo.#t1') IS NOT NULL drop table #t1
if object_id('tempdb.dbo
[code]....
This succeeds when the invalid column name is a valid column name in the outer query. So in this situation the sub-query would fail when run by itself but succeed with an incorrectly applied filter when run as a sub-query. The danger here is that if a SQL Server user runs DML in a production database with such a sub-query which then the results are likely not the expected results with potentially unintended actions applied against the data. how many SQL Server users have had incorrectly applied DML or incorrect query results and don't even know it....?
Hello everybody,
I'm developing a report using the following structure :
declare @sql as nvarchar(4000)
declare @where as nvarchar(2000)
set @sql = 'select ....'
If <conditional1>
begin
set @where = 'some where'
end
If <conditional2>
begin
set @where = 'some where'
end
set @sql = @sql + @where
exec(@sql)
I run it in query analyser and works fine, but when I try to run in Reporting Services, Visual studio stops responding and the cpu reaches 100 %.
I realize that when I cut off the if clauses, then it works at Reporting services.
Does anybody know what is happening?
Why the query works in query analyser and doesn't work in Reporting Service ?
Thanks,
Maurício
SQL Server 2012 Performance Dashboard Main advices me this:
Since the application is from a vendor and I have no control over its code, how can improve this sitation?
For each customer, I want to add all of their telephone numbers to a different column. That is, multiple columns (depending on the number of telephone numbers) for each customer/row. How can I achieve that?
I want my output to be
CUSTOMER ID, FIRST NAME, LAST NAME, TEL1, TEL2, TEL3, ... etc
Each 'Tel' will relate to a one or more records in the PHONES table that is linked back to the customer.
I want to do it using SELECT. Is it possible?
do i need to nest a query in RS if i want a calculated column to be compared against a multi value variable? It looks like coding WHERE calcd name in (@variable) violates SQL syntax. My select looked like
SELECT ... ,CASE enddate WHEN null then 1 else 0 END calcd name
FROM...
WHERE ... and calcd name in (@variable)
When viewing an estimated query plan for a stored procedure with multiple query statements, two things stand out to me and I wanted to get confirmation if I'm correct.
1. Under <ParameterList><ColumnReference... does the xml attribute "ParameterCompiledValue" represent the value used when the query plan was generated?
<ParameterList>
<ColumnReference Column="@Measure" ParameterCompiledValue="'all'" />
</ParameterList>
</QueryPlan>
</StmtSimple>
2. Does each query statement that makes up the execution plan for the stored procedure have it's own execution plan? And meaning the stored procedure is made up of multiple query plans that could have been generated at a different time to another part of that stored procedure?
Hi all,
In the Programmability/Stored Procedure of Northwind Database in my SQL Server Management Studio Express (SSMSE), I have the following sql:
USE [Northwind]
GO
/****** Object: StoredProcedure [dbo].[SalesByCategory] Script Date: 03/25/2008 08:31:09 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[SalesByCategory]
@CategoryName nvarchar(15), @OrdYear nvarchar(4) = '1998'
AS
IF @OrdYear != '1996' AND @OrdYear != '1997' AND @OrdYear != '1998'
BEGIN
SELECT @OrdYear = '1998'
END
SELECT ProductName,
TotalPurchase=ROUND(SUM(CONVERT(decimal(14,2), OD.Quantity * (1-OD.Discount) * OD.UnitPrice)), 0)
FROM [Order Details] OD, Orders O, Products P, Categories C
WHERE OD.OrderID = O.OrderID
AND OD.ProductID = P.ProductID
AND P.CategoryID = C.CategoryID
AND C.CategoryName = @CategoryName
AND SUBSTRING(CONVERT(nvarchar(22), O.OrderDate, 111), 1, 4) = @OrdYear
GROUP BY ProductName
ORDER BY ProductName
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
From an ADO.NET 2.0 book, I copied the code of ConnectionPoolingForm to my VB 2005 Express. The following is part of the code:
Imports System.Collections.Generic
Imports System.ComponentModel
Imports System.Drawing
Imports System.Text
Imports System.Windows.Forms
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.Common
Imports System.Diagnostics
Public Class ConnectionPoolingForm
Dim _ProviderFactory As DbProviderFactory = SqlClientFactory.Instance
Public Sub New()
' This call is required by the Windows Form Designer.
InitializeComponent()
' Add any initialization after the InitializeComponent() call.
'Force app to be available for SqlClient perf counting
Using cn As New SqlConnection()
End Using
InitializeMinSize()
InitializePerfCounters()
End Sub
Sub InitializeMinSize()
Me.MinimumSize = Me.Size
End Sub
Dim _SelectedConnection As DbConnection = Nothing
Sub lstConnections_SelectedIndexChanged(ByVal sender As Object, ByVal e As EventArgs) Handles lstConnections.SelectedIndexChanged
_SelectedConnection = DirectCast(lstConnections.SelectedItem, DbConnection)
EnableOrDisableButtons(_SelectedConnection)
End Sub
Sub DisableAllButtons()
btnAdd.Enabled = False
btnOpen.Enabled = False
btnQuery.Enabled = False
btnClose.Enabled = False
btnRemove.Enabled = False
btnClearPool.Enabled = False
btnClearAllPools.Enabled = False
End Sub
Sub EnableOrDisableButtons(ByVal cn As DbConnection)
btnAdd.Enabled = True
If cn Is Nothing Then
btnOpen.Enabled = False
btnQuery.Enabled = False
btnClose.Enabled = False
btnRemove.Enabled = False
btnClearPool.Enabled = False
Else
Dim connectionState As ConnectionState = cn.State
btnOpen.Enabled = (connectionState = connectionState.Closed)
btnQuery.Enabled = (connectionState = connectionState.Open)
btnClose.Enabled = btnQuery.Enabled
btnRemove.Enabled = True
If Not (TryCast(cn, SqlConnection) Is Nothing) Then
btnClearPool.Enabled = True
End If
End If
btnClearAllPools.Enabled = True
End Sub
Sub StartWaitUI()
Me.Cursor = Cursors.WaitCursor
DisableAllButtons()
End Sub
Sub EndWaitUI()
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
End Sub
Sub SetStatus(ByVal NewStatus As String)
RefreshPerfCounters()
Me.statusStrip.Items(0).Text = NewStatus
End Sub
Sub btnConnectionString_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnConnectionString.Click
Dim strConn As String = txtConnectionString.Text
Dim bldr As DbConnectionStringBuilder = _ProviderFactory.CreateConnectionStringBuilder()
Try
bldr.ConnectionString = strConn
Catch ex As Exception
MessageBox.Show(ex.Message, "Invalid connection string for " + bldr.GetType().Name, MessageBoxButtons.OK, MessageBoxIcon.Error)
Return
End Try
Dim dlg As New ConnectionStringBuilderDialog()
If dlg.EditConnectionString(_ProviderFactory, bldr) = System.Windows.Forms.DialogResult.OK Then
txtConnectionString.Text = dlg.ConnectionString
SetStatus("Ready")
Else
SetStatus("Operation cancelled")
End If
End Sub
Sub btnAdd_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnAdd.Click
Dim blnError As Boolean = False
Dim strErrorMessage As String = ""
Dim strErrorCaption As String = "Connection attempt failed"
StartWaitUI()
Try
Dim cn As DbConnection = _ProviderFactory.CreateConnection()
cn.ConnectionString = txtConnectionString.Text
cn.Open()
lstConnections.SelectedIndex = lstConnections.Items.Add(cn)
Catch ex As Exception
blnError = True
strErrorMessage = ex.Message
End Try
EndWaitUI()
If blnError Then
SetStatus(strErrorCaption)
MessageBox.Show(strErrorMessage, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
Else
SetStatus("Connection opened succesfully")
End If
End Sub
Sub btnOpen_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnOpen.Click
StartWaitUI()
Try
_SelectedConnection.Open()
EnableOrDisableButtons(_SelectedConnection)
SetStatus("Connection opened succesfully")
EndWaitUI()
Catch ex As Exception
EndWaitUI()
Dim strErrorCaption As String = "Connection attempt failed"
SetStatus(strErrorCaption)
MessageBox.Show(ex.Message, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
End Sub
Sub btnQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click
Dim queryDialog As New QueryDialog()
If queryDialog.ShowDialog() = System.Windows.Forms.DialogResult.OK Then
Me.Cursor = Cursors.WaitCursor
DisableAllButtons()
Try
Dim cmd As DbCommand = _SelectedConnection.CreateCommand()
cmd.CommandText = queryDialog.txtQuery.Text
Using rdr As DbDataReader = cmd.ExecuteReader()
If rdr.HasRows Then
Dim resultsForm As New QueryResultsForm()
resultsForm.ShowResults(cmd.CommandText, rdr)
SetStatus(String.Format("Query returned {0} row(s)", resultsForm.RowsReturned))
Else
SetStatus(String.Format("Query affected {0} row(s)", rdr.RecordsAffected))
End If
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
End Using
Catch ex As Exception
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
Dim strErrorCaption As String = "Query attempt failed"
SetStatus(strErrorCaption)
MessageBox.Show(ex.Message, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
Else
SetStatus("Operation cancelled")
End If
End Sub
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I executed the code successfully and I got a box which asked for "Enter the query string".
I typed in the following: EXEC dbo.SalesByCategory @Seafood. I got the following box: Query attempt failed. Must declare the scalar variable "@Seafood". I am learning how to enter the string for the "SQL query programed in the subQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click" (see the code statements listed above). Please help and tell me what I missed and what I should put into the query string to get the information of the "Seafood" category out.
Thanks in advance,
Scott Chang
I have two tables .. in one (containing user data, lets call it u).The important fields are:u.userName, u.userID (uniqueidentifier) and u.workgroupID (uniqueidentifier)The second table (w) has fieldsw.delegateID (uniqueidentifier), w.workgroupID (uniqueidentifier) The SP takes the delegateID and I want to gather all the people from table u where any of the workgroupID's for that delegate match in w. one delegateID may be tied to multiple workgroupID's. I know I can create a temporary table (@wgs) and do a: INSERT INTO @wgs SELECT workgroupID from w WHERE delegateID = @delegateIDthat creates a result set with all the workgroupID's .. this may be one, none or multipleI then want to get all u.userName, u.userID FROM u WHERE u.workgroupIDThis query works on an individual workgroupID (using another temp table, @users to aggregate the results was my thought, so that's included) INSERT INTO @users SELECT u.userName,u.userID FROM tableU u LEFT JOIN tableW w ON w.workgroupID = u.workgroupID WHERE u.workgroupID = @workGroupIDI'm trying to avoid looping or using a CURSOR for the performance hit (had to kick the development server after one of the cursor attempts yesterday)Essentially what I'm after is: SELECT u.userName,u.userID
FROM tableU u
LEFT JOIN tableW w ON w.workgroupID = u.workgroupID
WHERE u.workgroupID = (SELECT workgroupID from w WHERE delegateID = @delegateID) ... but that syntax does not work and I haven't found another work around yet.TIA!
When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says.
Command(s) completed successfully.
What I really need it to do is to display the results of the query. Does anyone know how to do this?
declare @SniierId as uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare @SniierAlias as nvarchar(50)declare @AlwaysShowEditButton as bitdeclare @SniierName as nvarchar (128)/* Check access for Sniier */SELECT TOP 1 @SniierName = Sniiers.SniierName, @SniierAlias = Sniiers.SniierAlias, @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId
I am trying to run queries against any of the user tables in my MS SQL 7.0 database. I get a message the Query Designer encountered a query error.
We have tried rebooting the SQL Server and I am still getting these messages. Also, the SQL error logs look fine - all database
maintenance are running successfully including the DBCCs which show no errors. Any help would be greatly appreciated as we are to go
into production in a few days.
How to optimize the following Stored procedure running on MSSQL server 2000 sp4 :
CREATE PROCEDURE proc1
@Franchise ObjectId
, @dtmStart DATETIME
, @dtmEnd DATETIME
AS
BEGIN
SET NOCOUNT ON
SELECT p.Product
, c.Currency
, c.Minor
, a.ACDef
, e.Event
, t.Dec
, count(1) "Count"
, sum(Amount) "Total"
FROM tb_Event t
JOIN tb_Prod p
ON ( t.ProdId = p.ProdId )
JOIN tb_ACDef a
ON ( t.ACDefId = a.ACDefId )
JOIN tb_Curr c
ON ( t.CurrId = c.CurrId )
JOIN tb_Event e
ON ( t.EventId = e.EventId )
JOIN tb_Setl s
ON ( s.BUId = t.BUId
and s.SetlD = t.SetlD )
WHERE Fran = @Franchise
AND t.CDate >= @dtmStart
AND t.CDate <= @dtmEnd
AND s.Status = 1
GROUP BY p.Product
, c.Currency
, c.Minor
, a.ACDef
, e.Event
, t.Dec
RETURN 1
END
GO
I am able to run a query which runs FAst in QA but slow in theapplication.It takes about 16 m in QA but 1000 ms on theApplication.What I wanted to know is why would the query take a longtime in the application when it runs fast on SQL server?How should we try debugging it?Ajay
View 2 Replies View RelatedHi there. I have occasional sincronization error.-XSUBSYSTEM Merge
-XSERVER MYSERVER
-XCMDLINE 0
-XCancelEventHandle 000006E0
2006-12-22 14:55:00.833 Connecting to Subscriber 'Subscriber01'
2006-12-22 14:55:00.895 Connecting to Distributor 'Publisher01'
2006-12-22 14:55:02.974 Initializing
2006-12-22 14:55:03.083 Connecting to Publisher 'Publisher01'
2006-12-22 14:55:06.005 Retrieving publication information
2006-12-22 14:55:06.130 Retrieving subscription information.
2006-12-22 15:00:07.222 The merge process failed to execute a query because the query timed out. If this failure continues, increase the query timeout for the process. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.
2006-12-22 15:00:07.456 Error converting data type nvarchar to numeric.
2006-12-22 15:00:07.800 Category:SQLSERVER
Source: Subscriber01
Number: 8114
Message: Error converting data type nvarchar to numeric.
After manual syncronization it goes under control.
Could anybody explain the relationship between converting error and timed out query?
If this is poor connection's problem how can I increase the query timeout for the process?