I am working on SSRS. I need to open a new report from one report when user clicks on some particular summerized count link.
Its a sort of drilled down report. I am not getting how to pass the respected Ids (more than one) to the next report when user clicks on the link in the 1st report. These ids I want to use as a parameter (multiple) in the 2nd report to dump the rows from the database.
How @StartDate and @EndDate parameters must added to the MDX query for usage in SSRS data set. strtomember can be used like
SELECT ( strtomember(@StartDate) : strtomember(@EndDate) ) ON COLUMNS FROM [Cube]
How can i specify that sub-select must work on the [Fact A] and [Fact B] rundate? strtomember(@StartDate) does not specify on which attribute this sub select is going to work. Any pointers ?
FROM ( SELECT ( [Fact B].[Rundate].&[2015-01-02T00:00:00] : [Fact B].[Rundate].&[2015-01-15T00:00:00] ) ON COLUMNS FROM ( SELECT ( [Fact A].[Rundate].&[2015-01-02T00:00:00] : [Fact B].[Rundate].&[2015-01-15T00:00:00] ) ON COLUMNS FROM [Cube] ) )
I have a project where I need to automatically pass 2 sets of parameters to a SSRS report and generate PDF files. I have set the defaults for the parameters based on one set of parameters and created a subscription to automatically generate PDF copy. However, I am not sure how to generate the report automatically using the other set of parameters. Also, I don't want to create two report files to accomplish this.
I am creating simple report in ssrs and pass one parameter only. It will work perfectly (here user enter the parameter value). but i need that i should select the value in drop down box. i had tried many time and did different ways but I am unable to do it.
First i gave the parameter in my sql query in Data set (like WHERE COUNTRY = @COUNTRY) and i checked the Parameters tab in the data set. Here by default comes the Parameter Name: COUNTRY and Parameter value: [@COUNTRY].
Next i select COUNTRY Parameter in the Report Data Pane. and go to properties Here in General Tab: Name COUNTRY Prompt: COUNTRY, Select Get values from query in available values Tab (and also i tried with Select Get values from query in Default Value Tab) and Select Data set: Data Set1, Value field: COUNTRY and Label Field COUNTRY. And Click Ok
And tried to preview the report, it throwing below error
"An error Occured during local report processing. The definition of the report is invalid. The Report Parameter 'COUNTRY' has a DefaultValue or a ValidValue that depends on the report parameter "COUNTRY". Forward dependencies are not valid.
How can I achieve dropdown list.What i missed? Even i unable to do it Multi valued parameters and Cascading parameters.
Actually i am working on SQL Express 2012 version.
Hi, I want to create a stored procedure which I can pass multi parameters. This is what I need, I have a gridview which is used for displaying customer info of each agent. However, the number of customers for each agent is different. I will pass customer names as parameters for my stored procedure. Here is a sample, CREATE PROCEDURE [dbo].[display_customer] @agentID varchar(20), @customer1 varchar(20), @customer2 varchar(20), ..... -- Here I do know how many customers for each agent AS SELECT name, city, state, zip FROM rep_customer WHERE agent = @agentID and (name = @customer1 or name = @customer2) Since I can not decide the number of customers for each agent, my question is, can I dynamically pass number of parameters to my above stored procedure? Thanks a lot!
I am writing an app that will allow a user to select various information for displaying in a report. The sql is dynamically generated when the user clicks on "Get Report". Currently, I am using a gridview with a datasource and I pass the query to the datasource and it displays in the grid view. However, our company has expressed a need to migrate reporting to SSRS.
Is there any way that I can use dynamic sql with a template report and feed the dynamic sql to it so that all I would have to do is write a single rdl or rdlc and pass it the sql?
Alternatively, is there a way to have One ReportViewer show multiple parameterized reports. Ie. User selects the report from a dropdown and then selects the parameter options from other dropdowns and when they click "get report" it loads the chosen report with the parameters?
I am SSRS user, We have a .net UI from where we want to pass multi select values, but these values are comma separated in the database. how can I write a sql query such that when I select multi values on my UI, the comma separated values are take care of.
I have an already published application running several MS SQL Server 2000 Reporting Services report. I need a way to find from either the reporting services log or the application server (IIS) logs or windows log to know the frequency of each report being used.
Based on this info, the business needs to know which reports are being used and to what extend? How can I acheive this?
I have already got the IIS logs and it did not give the required info. I have looked into the Reporting Services logs but it does not provide the info either.
I have an already published application running several MS SQL Server 2000 Reporting Services report. I need a way to find from either the reporting services log or the application server (IIS) logs or windows log to know the frequency of each report being used.
Based on this info, the business needs to know which reports are being used and to what extend? How can I acheive this?
I have already got the IIS logs and it did not give the required info. I have looked into the Reporting Services logs but it does not provide the info either.
My issue is with converting multi-value parameters:
In Crystal Reports, you can set a parameter to accept multiple vales (Discrete, Range or Discrete and Range).
As an example:
I have a database table with a column called ID. I can create a parameter called param_id and set the options of the parameter to "Allow multiple range values".
With this setup, I can limit the result set of the report by comparing the param_id parameter to the ID column in the database. Because param_id is a multi-value range parameter, I can pass it the following data: 1 - 50 60 - 80 150 - 127
This will only return results within those ranges.
Does anyone know if SSRS provides this kind of functionality?
Is it possible to write SSRS 2008 reports to run on an existing SSRS 2005 server?
If yes, what do I need to do to be able to write SSRS 2008 reports on my developer PC that will run on the SQL 2005 Server (which also has SSRS 2005 installed on it)?
I installed Visual Studio 2008 beta on the development PC and it appears that it needs SSRS installed on it too. So I installed SQL 2008 SSRS (SQL Server Reporting Services) and SQL 2008 Workstation Components onto the developer PC. Next I run the SQL 2008 "Reporting Services Configuration" tool. When I click on the "Web Service URL" section it hangs indefinitely and I have to force it closed.
The developer PC is Windows Vista Business.
Any suggestions on making this work, or any other information that you can think of that would allow me to use Visual Studio 2008 and the SQL 2008 "Report Designer Preview" tool to develop SSRS reports that will run on the SQL 2005 SSRS server?
Does anyone know of a link or list that has all the parameters for the "rs:" section of the URL access parameter, except for the ones in the Microsoft books?
hi, I am new to sql server reporting services. When i pass more than 30 parameters ,my report is showing parameters which is not a desired one even though i am making showparameterPrompts property to false.
can any one tell me how to pass more no of parameters to the Report.
MY DBA wrote a trigger, that upon hitting the delete button for a payment, the payment would be transferred to another table and the trigger would call a sp as well. since the trigger is calling the sp, I should only supply the parameters.
My report uses an OLAP query with a (multi-valued) parameter, the generated MDX query contains something like "...ON ROWS FROM ( SELECT ( STRTOSET(@Region, CONSTRAINED) ) ON COLUMNS FROM [cube]) ...".
The report works fine using the Report Manager frontend. Now I want to pass this parameter directly within the query string:
But I cannot get Reporting Services to accept the parameter via URL access (instead of complaining about a missing parameter value). I've already tried quoting/encoding the brackets, spaces, and the ampersand, putting the dimension in curly braces and/or quotes... No success.
Normal (url-encoded) query parameters work fine, I just can't pass OLAP parameters (dimensions like "[foo].[bar 123].&[baz]") this way. I think ReportServer doesn't like the way I'm trying to quote them...
Hi Gurus, I want to pass 0 value to all subreport parameters in the beginning when main report is run. This is because i dont want subreport query to run.
when user clicks on '+' in main report, i want to pass the parameter values so that the subreport will run with correct parameters for that particular main report row.
My purpose of doing this is to achieve speed with subreport
I have recently had a few reports that are built around the userid parameter start failing to pass the userid parameter. If I run the report and hard code the userid everything runs just fine, but I am not able to collect the userid when the user is logging into the report server. Any thoughts or suggestions?
Environment - Windows 2003 standard server SP1, SQL 2000 SP4 (installed mixed mode)
Goal: To have Crystal reports run via odbc dsn using windows authentication.
Big Honkin' Problem: I should say that if the users are local admins on this server then the windows authentication works just great, if not a local admin then it doesn't work. SQL gives an error access denied. (this shows in the logs btw.. to the end user crystal displays a generic database error) Since windows authentication failed, I then decided to use the dbo and switch to SQL auth. This dbo did not have a password and everything ran great. Then the IT dept. asked me to give the user a password, so I did. Then everytime Crystal opened, a window would appear asking the user to type the database , user and password. In Windows everytime this was done the crystal control files would change ownership to whomever entered the information making the report useless to any other user until I manually went into the file properties and changed it back. I develop these reports thru an VPN connection and on my desktop I said phooey on re-entering the password 50 zillion times while developing so I opened the dsn and put the PWD line in and it ran great. So we figured why not put this on the server - the password does not pass thru to SQL, even as admin user. The final problem that came up in relation to this is that I then created another user in SQL with no password so the reports would run. I developed a report that takes the current user credentials and passes it to the report via dde link. On my machine running over the VPN and launching the database program (GoldMine) over the WAN the report did everything it was suppose to. I high-fived myself and installed it on the server where the users would launch it and the dang thing wont pass the credentials over to the report.
I know there is not much to SQL security - it's either SQL or mixed mode. I have it on mixed mode and I know for fact it runs because Goldmine runs. I have to have some sort of security 'thang' in Windows 2003 somewhere that doesn't allow the passord to move and SQL only sees a blank password.
If any body can give me any help - I would so greatly appreciate it.
Actually we have multiple Sub Reports which we want to open from the Main Report. Initially when i used "Jump To Report" property it worked fine but in the browser the Main Report used to get refreshed everytime i had to Go Back to Main Report from Sub Report. Second solution which i want to try is using "Jump To URL" property. Some Details: I have multiple parameters in the report. My parameters are getting data from a Cube. Parameters can have Multiple Vaue selected at a time. I want to pass all the values to the URL.
Say Parameter1 is DimCountryCountry can have values such as: [Dim Country].[Country].[All] [Dim Country].[Country].&[India] [Dim Country].[Country].&[Germany] ......
Parameter2 is DimCountryState can have values such as: [Dim Country].[State].[All] [Dim Country].[State].&[Delhi] [Dim Country].[State].[Punjab] .....
Now i want to create a URL using these values,since each parameter should be separated by "&"(ampersand) my URL looks like one below. Following URL Works fine: javascript:void(window.open'(http://MyReportServer/ReportServer/Pages/Report.aspx?/MyReports/Project1/Country+Data&rcarameters=false&DimCountryCountry=[Dim Country].[Country].[All]&DimCountryState=[Dim Country].[State].[All]'))
as long as there is no "&" in the Parameter Value the URL works fine. But when i try to insert values other than "[All]" it starts failing because "[Dim Country].[Country].&[India]" contains "&", which gives error due to ambiguity, (whether this "&" is a parameter separater or is it a part of parameter value)
So i found a solution for that, which is to replace "&" with "%26" escape sequence characters.This works fine as long as we specify this escape sequence in address bar. i.e if we directly paste the following URL in the address bar it will work. http://MyReportServer/ReportServer/Pages/Report.aspx?/MyReports/Project1/Country+Data&rcarameters=false&DimCountryCountry=[Dim Country].[Country].%26[India]&DimCountryState=[Dim Country].[State].%26[Delhi]
but if we put this URL in the Javascript, it doesnot work, because the WIndow.Open function automatically replaces the "%26" characters with "&", which we know gives ambiguity error.
Please let me know if you have any suggesiton for it. Anyway any better solution for my problem.
how do i pass the paramenters and storedprocedure to dataview from code-behind? the below code have sqldatasource control but i want to pass through code-behind everything...
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataSourceID="SqlDataSource1" EmptyDataText="There are no data records to display." DataKeyNames="NewsId"> <Columns> <asp:BoundField DataField="NewsId" HeaderText="NewsId" InsertVisible="False" ReadOnly="True" SortExpression="NewsId" /> <asp:BoundField DataField="PostDate" HeaderText="PostDate" SortExpression="PostDate" /> <asp:BoundField DataField="PostedBy" HeaderText="PostedBy" SortExpression="PostedBy" /> <asp:BoundField DataField="PostedByName" HeaderText="PostedByName" SortExpression="PostedByName" /> <asp:BoundField DataField="Title" HeaderText="Title" SortExpression="Title" /> <asp:BoundField DataField="Body" HeaderText="Body" SortExpression="Body" /> <asp:BoundField DataField="LastUpdated" HeaderText="LastUpdated" SortExpression="LastUpdated" /> <asp:CheckBoxField DataField="IsVisible" HeaderText="IsVisible" SortExpression="IsVisible" /> </Columns> </asp:GridView> i have storedprocdure which accepts 4 parameters 3 paramenters which user will supply and 1 parameter will be supplied from code-behindwhat i mean by that is:the 4 parameters storedprocedure accepts is:empid, start_date, end_date (user will supply those 3 parameters)internal_id - which internally pass along with other 3 parmeterssomething like this:internal_id, empid, start_date, end_dateany thoughts?thanks.
UpdateCommand="UPDATE PsnQualifications SET quantity=@quantity WHERE rowstatus=1 and qualId=@original_qualId"
DeleteCommand="UPDATE PsnQualifications SET rowStatus=0, lastUpdateOn=getdate(), lastUpdateBy=@createdBy WHERE rowstatus=1 and qualId=@original_qualId"
I don't know how to pass parameters required (dates) to a query1, if I'm using a subquery (query2) which is using the results of query1, but I'm not showing that field on that subquery (query2)
Example
table1 id - autonumeric id_user - id from user dates - date of register
table2 id - user id name - user name
query1 SELECT Table1.id_user, Count(Table1.id_user) AS CuentaDeid_user FROM Table1 WHERE (((Table1.datess) Between [begining] And [ending])) GROUP BY Table1.id_user ORDER BY Table1.id_user;
subquery (query2) SELECT query1.id_user, query1.CuentaDeid_user, Table2.name FROM query1 LEFT JOIN Table2 ON query1.id_user = Table2.id;
This is just an example, the think is that I want to know that if it's possible to pass the parameters requested in query1 from the SQL of the subquery (query2)?
Hi, I have a table with queries. I need to execute those queries and pass results into a variable. Then use that variable/result to execute other queries to make business decisions. EXAMPLE: TASK#1 TABLE-A :has queries below select count(*) from employee select count(* ) from mangers
I want to execute those queries and store results in @counts. How I execute all queries in table A and pass that to a variable?
TASK#2 Then I have another SQL task(may be SQL task) which use the value @counts make some decisions If @count > 1 then pass If @count <1 then fail
How can I do that?
I am still new to SSIS and not very familiar with variables. Any advice would be appreciated.
In a matrix report with column and row groupings, how to pass the parameters to the drill-through report? The column grouping could open up into multiple columns and the same to the row groupings. I have a navigation link to a drill-through report on a total field in the matrix report and the drill-through report is required three parameters, one from the parameter from the matrix report (this one I can map to easily), second parameter is one of the value from the column grouping field and the third parameter is one of the value from the row grouping field. How to select those values from the column/row grouping.
I am using a parameterized select query as displayed below to fetch values from source.
SELECT A.Account_GUID, M.Merchant_GUID, H.Household_GUID, B.BankAU_GUID, SR.SalesRep_GUID, E.Entitlement_GUID, I.Income_GUID, Exp.Expense_GUID, SP.Sales_Product_GUID, P.Product_cd, SUM(S.Sales) AS Monthly_gross_MC_VI_amt, SUM(S.Sales) - SUM(S.[Returns]) AS Monthly_net_MC_VI_amt, SUM(S.SaleTxns) AS Monthly_gross_MC_VI_tran_cnt, SUM(S.SaleTxns) - SUM(S.ReturnTxns) AS Monthly_net_MC_VI_tran_cnt FROM Account AS A LEFT OUTER JOIN dbKAIExtract.dbo.tblSales_STG AS S ON A.Account_No = S.AccountNo And S.BucketNo = ? And S.ProductCode in ('01','02') LEFT OUTER JOIN Merchant AS M ON A.Account_No = M.Account_no INNER JOIN SalesRep AS SR ON SR.Rep_SSN = isnull(A.rep_SSN,'000000000') INNER JOIN Household AS H ON A.Account_No = H.Account_no LEFT OUTER JOIN BankAU AS B ON A.Assigned_AU = B.AU_No LEFT OUTER JOIN SalesProduct AS SP ON A.Account_No = SP.Account_no And SP.Reporting_Interval_Id = ? LEFT OUTER JOIN Entitlement AS E ON E.Account_no = A.Account_No AND SP.Product_Cd = E.Entitlement_Card_Type LEFT OUTER JOIN Income AS I ON I.Account_no = A.Account_No And I.Reporting_Interval_Id = ? LEFT OUTER JOIN Expense AS Exp ON Exp.Account_no = A.Account_No And EXP.Reporting_Interval_Id = ? LEFT OUTER JOIN Product AS P ON P.Product_cd = SP.Product_cd WHERE (A.current_ind = 1) AND (SR.current_ind = 1) GROUP BY A.Account_GUID, M.Merchant_GUID, H.Household_GUID, B.BankAU_GUID, SR.SalesRep_GUID, E.Entitlement_GUID, I.Income_GUID, Exp.Expense_GUID, SP.Sales_Product_GUID, P.Product_cd
My problem is, I am not able to assign any variables to parameterized query. Can any body guide how to assign respective variables to the parameterized query. I have the above query as a part of OLE DB Source step within Data flow task.
