How To Pass The Value Of A Text Box Inside A FORMVIEW To A SQL Stored Procedure
May 28, 2006
Hi,
I'm new to ASP.NET 2.0. I have a sqldatasource and a formview controls on a web page and inside the formview control I have two textboxes. When I click the UPDATE button in the formview, I'd like to be able to retrieve the values of the textboxes inside the formview control and pass these values to a 'Update' SQL stored procedure defined in the Sqldatasource.
Does anyone know how I can do this? Hope my question is clear.
Thanks in advance.
hakl
View 1 Replies
ADVERTISEMENT
Feb 2, 2004
I want to use a stored procedure inside Sql Server from my aspx page so that the data entered in the form goes to the database after submit.
My stored procedure (inside the SQL Server) inserts several fields in a table and it returns two variables.
What code I need to write in order to pass the data from the form to the stored procedure inside the Sql Server? And to store the two returned values?
Thanks
View 7 Replies
View Related
Jun 7, 2007
I am trying to inject dynamically generated text into a Sql2000 stored procedure. What am I doing wrong?A code behind routine generates the following string value based on a visitor entering 'sail boats' in TextBox1. The routine splits the entry and creates the below string.Companies.L_Keywords LIKE '%sail%' AND Companies.L_Keywords LIKE '%boats%'
I am trying to place this string result in the WHERE statement of a Sql2000 Stored Procedure using parameter @VisitorKeywords.
PROCEDURE dbo.KWsearchAS SELECT DISTINCT Companies.L_Name, Companies.L_ID, Companies.L_EnabledWHERE ( @visitorKeywords ) AND (Companies.L_Enabled = 1)ORDER BY Companies.L_Name
I am wanting the resulting WHERE portion to be:
WHERE ( Companies.L_Keywords LIKE '%sail%' AND Companies.L_Keywords LIKE '%boats%' ) AND (Companies.L_Enabled = 1)
Thank you
View 10 Replies
View Related
May 16, 2008
Hello,
I was wondering if you could help resolve a simple question - namely how to input a type text value as a parameter to a stored procedure, which expects that type of input.
Text type variables are not allowed and casting to varchar in this case will not work as the input will be far longer than 8000 characters.
Thanks!
View 3 Replies
View Related
Mar 3, 2008
Please excuse me if this question has been asked before; I couldn’t find it. Perhaps someone could point me to the solution.
A few years ago I wrote an order-entry application in classic ASP that I am now re-writing in ASP.NET 2.0. I am having very good success however I can’t figure out how to retrieve data from a stored procedure.
I am using the FormView & SqlDataSource controls with a stored procedure to insert items into an order. Every time an item is inserted into the order the stored procedure does all kinds of business logic to figure out if the order qualifies for pricing promotions, free shipping, etc. If something happens that the user needs to know about the stored procedure returns a message with this line (last line in the SP)
SELECT @MessageCode AS MessageCode, @MessageText AS MessageText
I need to retrieve both the @MessageCode and the @MessageText values in my application. In classic ASP I retrieved these values by executing the SP with a MyRecordset.Open() and accessing them as normal fields in the recordset.
In ASP.NET I have specified the SP as the InsertCommand for the SqlDataSource control. I have supplied all the parameters required by my SP and told the SqlDataSource that the insert command is a “StoredProcedure�. Everything actuly works just fine. The items are added to the order and the business logic in the SP works fine. I just have no way of telling the user that something important has happened.
Does anyone know how I can pickup these values so that I can show them to my users? Bassicly if @MessageCode <> 0 I want to show @MessageText on the screen.
View 10 Replies
View Related
Nov 1, 2007
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
View 1 Replies
View Related
May 26, 2008
Just wonder whether is there any indicator or system parameters that can indicate whether stored procedure A is executed inside query analyzer or executed inside application itself so that if execution is done inside query analyzer then i can block it from being executed/retrieve sensitive data from it?
What i'm want to do is to block someone executing stored procedure using query analyzer and retrieve its sensitive results.
Stored procedure A has been granted execution for public user but inside application, it will prompt access denied message if particular user has no rights to use system although knew public user name and password. Because there is second layer of user validation inside system application.
However inside query analyzer, there is no way control execution of stored procedure A it as user knew the public user name and password.
Looking forward for replies from expert here. Thanks in advance.
Note: Hope my explaination here clearly describe my current problems.
View 4 Replies
View Related
Nov 5, 2015
Can I invoke stored procedure stored inside from a user defined table column?
View 5 Replies
View Related
Jan 21, 2014
On SQL 2012 (64bit) I have a CLR stored procedure that calls another, T-SQL stored procedure.
The CLR procedure passes a sizeable amount of data via a user defined table type resp.table values parameter. It passes about 12,000 rows with 3 columns each.
For some reason the call of the procedure is verz very slow. I mean just the call, not the procedure.
I changed the procdure to do nothing (return 1 in first line).
So with all parameters set from
command.ExecuteNonQuery()to
create proc usp_Proc1
@myTable myTable read only
begin
return 1
end
it takes 8 seconds.I measured all other steps (creating the data table in CLR, creating the SQL Param, adding it to the command, executing the stored procedure) and all of them work fine and very fast.
When I trace the procedure call in SQL Profiler I get a line like this for each line of the data table (12,000)
SP:StmtCompleted -- Encrypted Text.
As I said, not the procedure or the creation of the data table takes so long, really only the passing of the data table to the procedure.
View 5 Replies
View Related
Jun 16, 2007
Hi,
Do you know how to write stored procedures inside another stored procedure in MS SQL.
Create procedure spMyProc inputData varchar(50)
AS
----- some logical
procedure spMyProc inputInsideData varchar(10)
AS
--- some logical
--- go
-------
View 5 Replies
View Related
Mar 20, 2007
hi all,
i'm wondering if i can use one stored procedure in too cases, this is the senario:
i have stored procedure for admin and another one for user, they have the same select everything is the same except that in admin SP i have where @admin = admin and for user i have where @user = user
if there a way to use if and else to make this happen
this is what i did so far:
CREATE PROCEDURE [test] @admin INT, @user INT, @indexType INT as
if @indexType = 1
begin
SELECT * FROM table WHERE something IN (SELECT * FROM anothertable where admin = @admin)
end
else
begin
SELECT * FROM table WHERE user = @user
end
GO
any suggestion will be very helpful
thanks
View 2 Replies
View Related
Aug 5, 2006
I want to execute some insert statements within a stored procedure and commit those changes regardless of any raiseerror that occurs later in the stored procedure. My difficulty is that I am forced to use raiseerror with severity 16 in order to send a message through the powerbuilder application interface (compiled vendor code). I have tried save points but can't get that to save my insert and still present an error to the user about something else that happens later.
here is an example
BEGIN procedure
Insert something and save it even if error is raised below
RaiseError('you made a mistake and need to do this.',16,-1)
END procedure
View 5 Replies
View Related
Mar 31, 2008
Hi folks
I nead to call a stored procedure in a where statemene, but MSSQL dont like that.
My problem is that the StoredProcedure is calling itself recursive and therfore its impossible to add the code as a standard SELECT statement. Here is the code
ALTER PROCEDURE dbo.advsp_FilterRecordRights
@RequesterGUID Char(20),
@EntityGUID Char(20)
AS
BEGIN
if not Exists(Select *
from GUIDRightsH
where GUIDRightsH.EntityGUID = @EntityGUID and
GUIDRightsH.RequesterGUID = @RequesterGUID and
GUIDRightsH.RecProp <> 0)
Begin
Return 1
end
if not Exists(Select *
from UsergroupMembers
where UserGroupMembers.UsergroupGUID = @RequesterGUID and
dbo.advsp_FilterRecordRights(UserGroupMembers.UserGUID,@EntityGUID) = 1)
Begin
Return 1
end
Return 0
END
View 3 Replies
View Related
Aug 14, 2006
Basically I have two strings. Both strings will contain similar data because the 2nd string is the first string after an update of the first string takes place. Both strings are returned in my Stored Procedure
For example:String1 = "Here is some data. lets type some more data"String2 = "Here's some data. Lets type some data here"I would want to change string2 (inside my Stored Procedure) to show the changed/added text highlighted and the deleted text with a strike though.
So I would want string2 to look like thisstring2 = "Here<font color = "#00FF00">'s</font> <strike>is</strike> some data. <font color = "#00FF00">L</font>ets type some <strike>more</strike> data <font color = "#00FF00">here</font>"
Is there an way to accomplish this inside a stored procedure?
View 2 Replies
View Related
May 18, 2007
This example is working:
Declare @startRowIndex INT; set @startRowIndex = (@PagerIndex * @ShowMembers); With BattleMembers as ( SELECT TOP 20 ROW_NUMBER() OVER (ORDER BY LastActivityDate DESC) AS Row, UserId, UserName FROM aspnet_Users) SELECT UserId, UserName FROM BattleMembers WHERE Row between @startRowIndex and @startRowIndex+@ShowMembersEND
and this one doesn't work:USE [xx]GOSET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[battle_Paging]@PagerIndex INT,@ShowMembers INT ASBEGINDeclare @startRowIndex INT; set @startRowIndex = (@PagerIndex * @ShowMembers); With BattleMembers as ( SELECT TOP 20 ROW_NUMBER() OVER (ORDER BY aspnet_Users.LastActivityDate DESC) AS Row, aspnet_Users.UserId, aspnet_Users.UserName, mb_personal.Avatar FROM aspnet_Users LEFT JOIN mb_personal ON (mb_personal.UserID=aspnet_Users.UserId) SELECT UserId, UserName, Avatar FROM BattleMembers WHERE Row between @startRowIndex and @startRowIndex+@ShowMembersEND
Error:Msg 156, Level 15, State 1, Procedure battle_Paging, Line 18Incorrect syntax near the keyword 'SELECT'.
I try to join in the table mb_personal here. Some help would be very appreciated! Thanks.
View 2 Replies
View Related
Oct 26, 2007
Hello, I have a situation that I query a table and return multiple rows (email addresses). I want to iterate through the rows and concatenate all email addresses into one string (will be passing this to another stored procedure to send mail). How can I process result rows inside a stored procedure? This is what I have so far: CREATE PROCEDURE [dbo].[lm_emailComment_OnInsert] @serviceDetailID int,@comment varchar(500),@commentDate DateTime,@commentAuthor varchar(100)ASBEGINDECLARE @serviceID intDECLARE @p_recipients varchar(8000)DECLARE @p_message varchar(8000)DECLARE @p_subject varchar(100)/* Grab the Service_id from underlying Service_Detail_id*/SELECT @serviceID = Service_id FROM lm_Service_Detail WHERE Service_Detail_id = @serviceDetailID/* Get email addresses of Service Responsible Parties */
SELECT DISTINCT dbo.lm_Responsible_Party.EmailFROM dbo.lm_Service_Detail INNER JOIN
dbo.lm_Service_Filing_Type ON dbo.lm_Service_Detail.Service_id = dbo.lm_Service_Filing_Type.Service_id INNER JOIN
dbo.lm_Responsible_Party_Filing_Type ON dbo.lm_Service_Filing_Type.Filing_Type_id = dbo.lm_Responsible_Party_Filing_Type.Filing_Type_id INNER JOIN
dbo.lm_Responsible_Party ON dbo.lm_Responsible_Party_Filing_Type.Party_id = dbo.lm_Responsible_Party.Party_idWHERE (dbo.lm_Service_Detail.Service_Detail_id = @serviceDetailID)/* Build message */
SET @p_subject = "KLM - Service ID: " + CAST(@serviceID AS varchar(4))SET @p_recipients = "" /*need string of addresses*/
SET @p_message = @p_message + "Service Detail ID: " + CAST(@serviceDetailID AS varchar(4)) + char(13)SET @p_message = @p_message + "Comment Date: " + CAST(@commentDate As varchar(25)) + char(13)SET @p_message = @p_message + "Comment Author: " + @commentAuthor + char(13)SET @p_message = @p_message + "Comment: " + @comment + char(13)PRINT "subject: " + @p_subject + char(13)PRINT "recip: " + @p_recipients + char(13)PRINT "msg: " + @p_message + char(13)/*Send the email*/
Execute master..xp_sendmail @recipients = @p_recipients, @message = @p_message, @subject = @p_subject END
GO
View 7 Replies
View Related
Feb 28, 2005
I am having problem with 'TOP @pageSize'. It doesn't work, but if I replace it by 'TOP 5' or 'TOP 6' etc., then the stored procedure runs without errors.
Can someone please tell me how I could use @pageSize here so that it dynamically determines the 'n' of 'TOP n' ?
ALTER PROCEDURE dbo.spGetNextPageRecords
(
@pageSize int,
@previousMaxId int
)
AS
/* SET NOCOUNT ON */
SELECT Top @pageSize ProductId, ProductName
FROM Products
WHERE (ProductID > @previousMaxId) order by ProductId
RETURN
View 4 Replies
View Related
May 7, 2005
Hello :) I need to do something like this:
CREATE PROCEDURE SelectCostumers @name varchar(100)
Declare @SQL = "SELECT Id, Name FROM Costumers"
AS
IF (@name IS NULL)
@SQL
ELSE
@SQL += "WHERE Name LIKE @name"
See, what I need is a string variable that I can concatenate with whatever I want depending on the parameter I get.
Thank you
View 2 Replies
View Related
Feb 26, 2004
I am trying to creating a table inside a stored procedure using SQL that works fine in Query Analyzer. However, when I check the syntax I get the following message:
Error 208: Invalid object name '##OPTIONSEX'
I am using the following SQL script:
CREATE PROCEDURE [dbo].[Test2] AS
CREATE TABLE ##OPTIONSEX
(
OPTION_PLAN VARCHAR(50),
TOT_OPTIONS_EXCHANGED FLOAT NULL
)
GO
INSERT ##OPTIONSEX
SELECT
B.COMPONENT,
TOT_OPTIONS_EXCHANGED = SUM(A.UNITS)
FROM TBLEXERCISEOPTIONS A, TBLCOMPONENT B
WHERE B.COMPONENTID = A.COMPONENTID
GROUP BY B.COMPONENT
GO
Any help getting this to run correctly would be appreciated.
View 3 Replies
View Related
Jun 23, 2006
Hi Folks!
I have a cursor inside a stored procedure that should identify rows based on certain criteria and update the columns on those records.
While I try to do so, the cursor goes into an infinite loop although I have only 1 record that matches my criteria. I think that the transaction is not commited and the cursor is picking up the same record for update.
Here is my sample record in table :tblMsg
SenderRef <space> MsgStatusId <space> MsgType <space>Groupid
1281341<space> 1 <space>KBC-NON-ETC-MATCHED-BLIM <space>191902
1281341 <space>18 <space>KBC-RCVD-ADM <space>191902<space>
and here is my code.
CREATE PROCEDURE msg_ResolveADMBeforeBlim
AS
DECLARE @blimGroupId AS INT
DECLARE @admSenderRef AS VARCHAR(50)
DECLARE admCursor CURSOR FOR
SELECT senderref
FROMtblMsg
WHERE msgstatusid = 18
AND msgtype = 'KBC-RCVD-ADM'
FOR UPDATE
OPEN admCursor
FETCH NEXT FROM admCursor INTO @admSenderRef
WHILE @@FETCH_STATUS = 0
BEGIN
--FIND CORRESPONDING BLIM RECORD AND GRAB ITS GROUPID TO UPDATE THE ADM
SELECT @blimGroupId = GroupID
FROM tblMsg
WHERE msgType = 'KBC-NON-ETC-MATCHED-BLIM'
AND SenderRef = @admSenderRef
PRINT 'AFTER SELECT INSIDE WHILE: Senderref- >' + @admSenderRef;
--UPDATE THE ADM RECORD WITH THE GROUPID AND MSGSTATUS = 3
BEGIN
UPDATE tblMsg
SET MsgStatusId = 3, GroupId = @blimGroupId
WHERE CURRENT OF admCursor
END
PRINT 'AFTER UPDATE INSIDE WHILE';
END
CLOSE admCursor
DEALLOCATEadmCursor
The update statement was included beteween a BEGIN TRAN and END TRAN. But no joy.
Any ideas why this would happen?
Thanks for your help.
Arun
View 3 Replies
View Related
Jul 20, 2005
Okay, so I have a problem and I would be REALLY grateful for anyassistance anyone can offer because I have found little or no help onthe web anywhere.I want to access and do joins between tables in two different SQL db'son the same server. Heres what Im dealing with.In one database resides all of my security features for our clients,where it decides who can login, etc etc....In another database, I need to cross reference with a few fields in mysecurity db.See the issue Im running into here is that because the way the peoplehave their databases set up for different products, I would normallyhave to put these tables with security features in every database...which is horrible, because every time I do an update I would have todo it in 12 different places. Thats not efficient at all.So I thought if I had one central DB, where all security features arecontrolled from, that would be perfect... now the issue is crossreferencing and doing joins with other tables that ARENT in the samedb....have I lost you yet?I appreciate all of your help!THANKS!!
View 5 Replies
View Related
Dec 21, 2006
Hi for all
i just get the news that the Dec. CTP of SQL Server 2005 & tools is released !
but my dream is to see debugging stored procedure support inside the SSMSE as debugging applications inside Visual Studio 2005
Many many many thanks to Microsoft and for the great efforts on the cool products
Mohamed
View 3 Replies
View Related
Apr 30, 2008
Hi,
I have to write a stored procedure what repair a table.
It have to delete lost rows before make relation to itself (PK column is 'Kw_KeywordID', FK column is 'Kw_ParentID').
I do not found the way to write this procedure to can create statement from parameter of the procedure.
I would like to pass the table name, but I receive error if the query like 'Select ... Form @Table ....'.
If the parameter is in the 'WHERE', nothing problem.
My procedure is:
CREATE PROCEDURE sp_Repair_IS_KW_AbtKz176
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
declare @OrphanRowCount int
select @OrphanRowCount = 1
while(@OrphanRowCount > 0)
begin
DECLARE KWCursor CURSOR FOR
SELECT count(*) AS cRowCount FROM IS_KW_AbtKz176 WHERE Kw_ParentID IS NOT NULL AND Kw_ParentID NOT IN (SELECT Kw_KeywordID FROM IS_KW_AbtKz176);
OPEN KWCursor;
FETCH NEXT FROM KWCursor INTO @OrphanRowCount
CLOSE KWCursor
DEALLOCATE KWCursor
IF (@@FETCH_STATUS = 0) AND (@OrphanRowCount > 0)
BEGIN
exec('DELETE FROM IS_KW_AbtKz176 WHERE Kw_ParentID IS NOT NULL AND Kw_ParentID NOT IN (SELECT Kw_KeywordID FROM IS_KW_AbtKz176)')
END
end
END
GO
How can I run fully parameterized queries from an SP.
I can make it only like exec('DELETE FROM' + @TableName + ...)
Thank you for any idea,
Imre
View 2 Replies
View Related
Feb 22, 2007
Hi,
i need to insert a record 1 or more times, depending of a variable in code-behind:dim amount as integeramount= value (e.g. 3)
My problem is: how to pass that variable to the stored procedure?I tried with this but nothing happens:
comd.Parameters.Add("@amount", SqlDbType.NVarChar, 10).Value = amount_of_details
Maybe is my stored procedure wrong?
Thanks
T.
Here is it:----------
ALTER PROCEDURE dbo.insert_table (@field1 nvarchar(10),...)ASDeclare @iLoopNumber intDeclare @amount intBEGIN TRAN
SET @iLoopNumber = 1
SET @amountr
While (@iLoopNumber <= @amount)
BEGIN
INSERT INTO table(field1,...)
VALUES (....))
SET @iLoopNumber = @iLoopNumber +1
End
COMMIT TRAN
View 3 Replies
View Related
Aug 11, 2007
How do I pass values from my ASP.NET page code into my Stored Procedure, to become parameters to be used in my Stored Proc?
Much thanks
View 2 Replies
View Related
Sep 19, 2005
Hi I have an if clause in my code to add the final parameter value to send to the database.
If Page.User.IsInRole("MICMS") Then
cmdCheckUser.Parameters.Add("@C_ID", 0)
Else
cmdCheckUser.Parameters.Add("@C_ID", Session("C_ID"))
End If
If the user is in the role, the error is triggered saying that @C_ID
is expected by the stored procedure. If i then change the value from 0
to 10, the stored procedure works fine.Is there any reason that the stored procedure is failing when the value 0 is used and not when any other value is used?Thanking you in advance.
View 1 Replies
View Related
Nov 30, 2005
hi,i am passing a xml file name to the stored procedure. the SP parses the file. but it is giving the error' INVALID AT THE TOP LEVEL OF THE DOCUMENT 'I expect this because of + and - in the xml file bafore the parent tags.how can i do the parser to eliminate these.
View 1 Replies
View Related
Mar 9, 2006
How can I pass a parameter to a stored procedure using Visual Web Developer 2005? I have created a SQLDataSource that calls the SP.
Thanks
--R
View 1 Replies
View Related
May 7, 2001
I have a two dimensional array in Front end (As for example Array contains 20 ECode and EmployeeName). I have a Stored Proc. where i have written a statement for inserting theses value in a table. so how i will pass this array to SP. Pls. give exmp. for Front end and SP also.
View 3 Replies
View Related
May 2, 2006
Hello,I read an article on how to use Yahoos API to GeoCode addresses. Basedon the article I created a stored procedure that is used as follows:SPGeocode '2121 15st north' ,'arlington' ,'va' ,'warehouse-test'Returns:Latitude Longitude GeoCodedCity GeoCodedState GeoCodedCountryPrecision Warning----------- ---------- ------------- ------------- ------------------------------ --------38.889538 -77.08461 ARLINGTON VA USPrecision Good No ErrorIt returns Latitude and Longitude and other information. Works great.In conjunction with Haversine formula, I can compute the distancebetween two locations if I know the Lat and Long of the two points.This can start to answer questions like "How many students do we havewithin a 10 mile radius of Location X?"(Marketing should go nuts over this :)My question is how can i use my data from a table and pass it to theSPGeocode via a select statement?The table I would use is:CREATE TABLE "dbo"."D_BI_Student"("STUDENT_ADDRESS1" VARCHAR(50) NULL,"STUDENT_ADDRESS2" VARCHAR(50) NULL,"STUDENT_CITY" VARCHAR(50) NULL,"STUDENT_STATE" VARCHAR(10) NULL,"STUDENT_ZIP" VARCHAR(10) NULL);This is so new to me, I am not even sure what to search.TIARob
View 4 Replies
View Related
Jan 9, 2007
Dear All,
I am using sql2000, I want to know whether in stored procedure we can pass
array. Or is there any other solution to pass array of records
Please Guide Me
thanks
View 3 Replies
View Related
Jun 18, 2007
Hello,
I have a VB.NET stored procedure as below:
Code Snippet
Partial Public Class StoredProcedures
Public Shared Sub My_UpdateCountsManaged( ByRef paramInOut As Integer)
'here I perform update statement using "paramInOut" passed form calling code
.......
'then I return value to the calling code
paramInOut = 555
End Sub
End Class
Calling code specifies a parameter like this:
Code Snippet
Dim param as Sqlparameter = New SqlParameter("@paramInOut", SqlDbType.Int)
param.Direction = ParameterDirection.InputOutput
param.Value = 999
cmd.Parameters.Add(param)
When I execute the code, it surely gets back "555" from SP, the problem is that SP never gets "999" from calling code despite ParamDirection is InputOutput. It always receives 0. I am afraid I don't understand something fundamental ?
Any help would be appreciated.
Thanks a lot,Fly.
View 4 Replies
View Related
Feb 1, 2008
Hi,
I want to pass an xml file to stored procedure in SQL Server 2000 as a parameter.
Can we pass the xml file path as a parameter? if not then how can it be done.
I want to serialize data to XML and then pass it to a procedure to insert data.
Kindly help ASAP.
Thanks
View 4 Replies
View Related
