Hi All, Please help me how to proceed from this situation, my requirement is to present (load) data in excel file and need to access (update/delete) it, the data which is in remote server; I want to connect database using odbc connection through ASP.NET. Please suggest me how to continue.
Thanks to all in Advance.
kolags@hotmail.com
I have an excel sheet containing one column (ID_NO) with 400K rows. I have a database from where I have to fetch some other columns from a Netezza database. Initially I tried hardcoding all the 400K rows in the query that I wrote using filter WHERE ID IN ('1212','2334'). But after pasting all the 400K rows the query is running indefinitely.
I have imported all the ID in a SQL table (MY_LIST table). I used a DFT, and selected ODBC source, and selected my netezza server. Then in the 'Data access mode' I selected the SQL command from the dropdown.I pasted the same query that I wrote in Netezza. Is there any way to pull only for those records that I have pulled in my SQL table (MY_LIST) ?
I apologize if this is not the correct forum for this posting. Looking at the descriptions, it appeared to be the best choice.
I am running Windows XP Pro SP2. I have installed the SQL Native Client for
XP. However, when I try to add a new data source through ODBC Connection
Manager, SQL Native Client is not listed as an option. I have followed this procedure on three other systems with no problems. What would be causing the
SQL Native Client to not show up in the list of available ODBC data sources?
Hello everyone,
Since I would like to use an Excel 2007 File (*.xlsx) as Data Source, I created an ODBC Connection. It worked fine so far: the connection is established, I get the data as expected in the "Query Designer tab" and I could insert the fields in my report. However, when I want to see the result on the "Preview tab", I get an error saying that the "Report Definition '/myReport' is not valid...".
I don't know what could be wrong in my Report... Am I missing something in the ODBC configuration?
My Connection String is as follows:
Dsn=pl_excel;dbq=C:PublicPL_DataSource.xlsx;defaultdir=C:Public;driverid=1046;fil=excel 12.0;maxbuffersize=2048;pagetimeout=5
I also tried to create an OLE DB connection but I got the same error...
Thanks for your help, I'm waiting for your suggestions...
Got an error of
Error during Transformation 'DirectCopyXform' for Row number 813. Errors encountered so far in this task: 1.
TransformCopy 'DirectCopyXform' conversion error: Destination does not allow NULL on column pair 1 (source column 'Customer' (DBTYPE_R8), destination column 'Customer' (DBTYPE_STR))
What does that mean?
I have an excel file named Customer List with fields such as Customer, Name, City.
I want to import it into a syspro table called SyproCompanyF.ArCustomer.
I need detailed instructions on how to connect to a database from a Microsoft Access 2007 database to a Microsft Office Accounting 2007 database. The accounting database is an SQL 2005 datbase. It has an instance name of "MSSMLBIZ".
When I try I get an SQL error 53. Do not have permissions or database does not exist.
Thanks in advance for any help.,
Hi everyone,
I have a task to create a dts package, which will delete records in a SQL table, which are present on a sheet tab in Excel. I know how to transfer records from Excel to SQL table and vice versa, but not sure how I can delete the records in SQL table, which are present in Excel. Note that there are just 2 columns - one is a key and the other name.
Thank you all in advance,
Saurav
Is there a way to choose which database you want to connect to in the ODBC connection?
And does this differ from one ODBC connection to another, say for instance Teradata and SQL Server?
I was looking up the syntax and it seems like you can say Database=LACPP and it will choose the database....
I have also seen username/password@LACPP.SQLSERVER
Are there any documents out there that talk about how to create different kinds of ODBC strings and if you can always limit which database you are looking at?
-Bob
I'd like to set up an ODBC DSN to a table in a linked SQL Server, viamy local SQL Server.I'm having a few problems:1. When I use Enterprise Manager to link the remote SQL Server, itdoesn't allow me to select the database in the remote server. It onlyshows one database.2. When I use the Data Sources program to set up the ODBC DSN, it onlyshows databases in the local SQL Server, not in the linked one. If Itry typing it in: [NAMEOFLINKEDSERVER].databasename - it tells me thatit is an invalid table.
View 5 Replies View RelatedI am trying to create and later read a data file from a package deployed in SSISDB, but it is not reading it while it is successfully creating the file. The same package when run from the file system package, runs successfully. Generating ispac and deploying in SSISDB is running for infinite time. Is it a permission issue?
View 7 Replies View RelatedMy application works with the Connection pooling ODBC. Everything works well, when it data base this down the SQLConnect function finishes steeply my application.
View 3 Replies View RelatedHi There
I am having some issues with dts packages i have migrated using the package migration wizard.
One of the connection managers points to an execl flat file source.
I have not altered anything after the package migration, the conenction manager is using Native OLE DBMicrosoft Jet 4.0 OLE DB Provider.
When i test the connection i get the following error :
"Test connection failed becuase of an error in initializing provider. Cannot start your application. The workgroup information file is missing or opened exclusively by anotehr user."
Ok i am 99% sure this file is not being accessed by another user, the rest of the error is greek to me. Looking on the net for this error it has to do with access database security and having to sertup htm pages for IIS, i cannot findanything on this error relating to ssis connection manager.
PLEASE HELP.
Thanx
I have a report in SSRS2012. It was copied from SSRS2005 quite recently, as we have upgraded. The SQL developer said that it didn't need any code changes, as he had some kind of tool to test code problems between the two versions. The report has a table, with 5 row groups, and one detail row. The table is setup as follows:
Name Sales Costs Profit
Group1
Group2
Group3
Group4
Group5
DetailsRow
When I run this report using the Report Manager website from SSRS2005, and then export to Excel 2013, I get the 6 row groups in Excel, no problem whatsoever. I can drill into each group in Excel, using the group drilldown column on the left hand side. This works the same as the Report Manager website.
If I run the exact same report from the Report Manager website in SSRS2012, the Report Manager result is the same as SSRS2005 - all the row groups are present, and the drilldown works fine. However, the export to Excel has issues with the groups. There are only 3 row groups showing in Excel, along with a column group added for no apparent reason.
Drilling into each group shows inconsistent details, and there is no apparent logic as to what is shown within each group. I should also mention, that this issue with groups is seen on all my reports which have groups, not just this report.
I am using SSIS 2014 with the below .net framework version and installed in Windows server 2012 R2 . I have installed my client's odbc drivers (both 32 bit and 64 bit) in my production server and created ODBC system DSNs for 32 bit and 64 bit.
When i open SSIS 2014 and tried to create the odbc connection but i can able to see only the 32 bit system DSN connection ,i can't able to see my 64 bit odbc system dsn connection.
Microsoft Visual Studio 2012 Shell (Integrated)
Version 11.0.50727.1 RTMREL
Microsoft .NET Framework
Version 4.5.51650
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 12.0.1524.0
And i installed my client odbc drivers(32,64 bit) and created ODBC system DSNs in my local system and when i open ssis 2014 and i can able to see both the ODBC system DSNS(32,64) connections from SSIS ODBC connection.
I am using below version of .net framework in my local system which was installed in windows 7 and i have SSIS 2012 also installed in my system and i can able to see both ODBC connections using 2012 as well in my local system.
Microsoft Visual Studio 2012 Shell (Integrated)
Version 11.0.50727.1 RTMREL
Microsoft .NET Framework
Version 4.5.50938
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 12.0.1524.0
why i can not see the ODBC 64 bit system DSN connection from SSIS in my production server ?
I need to process a 2012 Excel file. In SSIS Connection Manager, I am only given an option until Excel 2007 version. When I use this in my connection for Excel Source, I am prompted with this error when I attempt to select the name of the sheet:
"Could not retrieve the table information for the connection manager 'Excel Connection Manager'.
Failed to connect to the source using the connection manager 'Excel Connection Manager'"
Also my Run64BitRuntime is set to false.
Hi *, is there a way to connect Excel to SQL Server so that Excel serves as a frontend to SQL Server? I heard rumors that this is possible with the 2007 release.
I'm looking for a product that helps me storing massive data outside an Excel file. Right now, I'm using Palo (open source multidimensional database).
Regards,
Steve
I've created an excel spreadsheet with a data connection. This data connection uses a query that runs against a read-only database.
The issue I'm having is that the query never seems to finish running against the database, whether I open the Excel spreadsheet to view the data or run the query in SSMS.
I created the connection on the Data ribbon by going to From Other Sources --> From SQL Server and using the Data Connection Wizard.
Is there some kind of setting or property I'm missing that would allow this query to finish running?
Hi, I am very new to ssis, I am trying to set up a package that I can set to run every hour or so, what it will do is look for all excel files in a certain folder and import them into a table on an sql server.
I managed to get it working but my problem is that my data is survey answers and some columns contain a comment.
I get these files on a weekly basis and some weeks the length of the longest comment makes ssis want to use a different data type for the comment column (sometimes it wants DT_NTEXT, other times it wants DT_WSTR).
as this column is filled out by a human I guess aposrtophies and other characters may affext this as well.
when I made the data flow task, I used the wizard on a file which contained about 8 weeks worth of data. when I use 1 weeks worth of data where the comment length is very low, the task gives a validation error saying the metadata is out of sync. if I go back and set the data type for that column to DT_WSTR and rerun the task, it works but then when it tries to process a different weeks worth of data it will fail again
here is an example of an error I get when it thinks the data type is wrong.
[Source - 'raw data$' [1]] Error: The output column "Question ID50# (Verbatim)" (439) on the error output has properties that do not match the properties of its corresponding data source column.
I played around with the data types for a while and managed to get it to process the first file and then try to process the secondfile, in the second file it got around the validation but then got this error:
[Source - 'raw data$' [1]] Error: Failed to retrieve long data for column "Question ID3# (Verbatim)".
is there a way to make it recalculate the data types by itself for each excel file?
I am stuck trying to figure this one out.
sorry if I havent provided enough information, I am not sure which direction to head with this
Hai,
I am new to SSIS 2005.
Now i would like to use the foreach loop structure in an SSIS package to
loop through however many Excel files are placed in a directory and
then perform an import operation into a SQL table on each of these
files sequentially.
But i dont know how to get start?
Can anyone guide me on this task?
Thanks.
I have the Excel Connection Manager and Source to read the contents from an Excel file. For some reason couple of numeric fields from the Excel worksheet are brought over as nulls even though they have a value of 300 and 150. I am not sure why this is happening. I looked into the format of the fields and they are set to General in Excel, I tried setting them to numeric and that did not help.
All the other content from the excel file is coming thru except for the 2 numeric fields.
I tried to bring the contents from the excel source to a text file in csv format and for some reason the 2 numeric fields came out as blank.
Any inputs on getting this addressed will be much appreciated.
Thanks,
Manisha
When I create a new odbc connection to a SQL server 2005 Db I get a failure telling me dat de SQL server does not allow remote connections.
How can I allow the server to allow this.
Any help appreciated
regards
Hi Guys,
Can anyone tell me how can I achieve the file import of XLS file and read the data inside to insert into the respective table in my SDF database in the mobile devices?
Thanks.
Regards,
Jenson
Hello All,i have 2 excel files which i want to upload to sql database. i know how to upload to the folder. my question how to i use these excel files and convert them into tables in sql database.i have to do this on a regular basis. is there anyway i can do this. the 2 files when converted to tables, i need to create relationships etc. any suggestions or references please. i appreciate it. Thanks
View 2 Replies View RelatedI have an excel sheet with 10 tabs (work sheets) and each work sheet contains data. I want to migrate all data once into my database table.
View 2 Replies View RelatedIs there anyway to send excel file from ssis using send mail task without saving the excel file locally. I need to automate the process which involves loading the excel file from the database and send it to some people.
View 6 Replies View RelatedHi All,
i have some views in my database, and these views are having some columns,i want to know particular column name to be there in particular view.
For example ,just like functionality of sp_search_code 'Keyword'.
like this i want to search in views .
or else please let me know sp_search_code 'Keyword'. was used for views also.
Thanks and Regards,
G.JaganMohanrao.
I have created a table but i forget in which database. I know the table name but i dont know the database name..
I have to filter my table from all database ... how can i do and find....
I have a comments field in database table which holds all html data, like bold chars and underline and with fonts etc.
Is it possible to show that data in the report or do i have to extract the data only by excluding all html / font tags etc.
Please help thank you very much.
Hi everyone, sorry if this message is not supposed to be posted here.
I'm learning asp.net , and would like to know how I can insert data from a excel file into a database on my web account. Pretty much insert/update information in the database using excel file or a access file.
Thanks a lot in advance
Dear all,,
I need your help,,I'm work in website project using ASP.NET,,I have to register the users of this site,, the users are over 200,,so,,I'm thinking in away to save my time,,All the information of these users are stored in Excel file,,What I want to do is to imports these data from the excel file into a table in my database(SQLserver database),,Could you help in coding by VB.NETThanks in advance,,
I have an .xlsx file where I need to import the data into a table. If there is not a way to do this, is there a way to import either a tab del file or different type of .csv file into the database?
Do not want to use the SSIS or import feature from SQL2008 as I tried to save the steps and running it wont work either.
The problem that I am having is that with Visual Web Developer I am creating a webpage and having it directly put online, so for example when I start a new ASP.NET page, I select the location to be HTTP, with the location http://MYWEBSERVER/Website and for the language and Visual BasicI notice a couple of things, first that there is no longer a a link under the Main toolbar "Website" selection called the ASP.NET configuration. So how can I configure what I want to have users be able to do? It seems that this choice is only available if I am building the ASP.NET page on my "localhost". So that is the first problem. So I am able to get the pages to work, atleast the things such as the textboxes to show up etc, (Even things as advanced as the "Login" box). How ever when I try to get someone to try to login I am taken to a page that has an server error. The error is:
"The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file. "
The Stack Trace Errors are at the bottom. I think this is happening because the automatically generated databases are not getting built online as they are on my computer. On my computer I have MSSQL express. So either the databases are not getting built for some reason, (and I think that is the case as I don't see any in the folder). So I think that somehow I have to create a database on my server, and then somehow configure the ASP.NET file, perhaps in the Web.Config file to look for that new database. Is this the correct methodology? Is there some simpler way that I can just somehow upload things as they are and have them work correctly on my server? The error says that either the Server did not find the database or that the trust level was insufficient. I don't think that is it as I just looked again and I don't see any .MDF files. So how would I go about getting this to work right? Is there a way to do this with MySQL also? So that I don't have to use MSSQL? My server only allows 1 DataBase for that.
Thanks and I hope my question makes sense. It is basically how can I get it to be able to create and check users etc. online?
Brian
[ProviderException: The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file.] System.Web.DataAccess.SqlConnectionHelper.EnsureSqlExpressDBFile(String connectionString) +2555237 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +87 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160 System.Web.UI.WebControls.Login.AttemptLogin() +105 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
In my ssis package,
I have a DSN connection like this: "DSN=myDSNname". Which decide from i have to pull the data.
By using OLE DB Source Editor, I want to assign that ODBC Connection to it.
By data source Reader i can achive this but where i have to pass the hard-code SQL Query that i don't want.
i'm using the variable for dynamic SQL command.
Thanks.
Manoj