How To Print The List Of All Data Type?
Jun 17, 2008How to print the list of all data type and example?
For example, bit, int, datetime...
ADVERTISEMENT
Upsizing From Access Data Type Problems List
Jul 20, 2005Hi there,I'm trying to come up with a definitive list of ACcess data types thatcause a problem when upsizing to SQL Server.On the last occasion that I upsizzed, SQL Server had an issue withsmallDatetime and with Autonumbers.I changed the smalldatetime to be datetime in access and that cured thatproblem.With the Autonumbers, I set them to be of type integer with identity setto yesI was wondering if anyone could tell me other access data types thatcause problems and also what their sql server match should be?M3ckon*** Sent via Devdex http://www.devdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedPrint List Of Queries, Tables, Views And Sp
Oct 29, 2007I just started a new job and 1st time on sql server, how can i print list of queries, tables, views, stored procedures and functions?
View 6 Replies View RelatedPrint List Of Tables With Identity Row Set To NOT FOR REPLICATION
Jul 20, 2005Does anyone know if there's an SQL command i can run that will listthe tables in a database that have an identity column set to NOT FORREPLICATION?Many thanksDan Williams.
View 2 Replies View RelatedIndex Creation Causes Error The Conversion Of A Char Data Type To A Datetime Data Type Resulted...
Jul 23, 2005Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedSystem.Data.SqlClient.SqlException: The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value.
Dec 14, 2005After testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
Converting A Data Type Double To A Type Float Using A Data Adapter && SSCE 3.5
Feb 13, 2008Hi,
I can populate a dataTable with type double (C#) of say '1055.01' however when I save these to the CE3.5 database using a float(CE3.5) I lose the decimal portion. The 'offending' code is:
this.court0TableAdapter1.Update(this.mycourtsDataSet1.Court0);
this.mycourtsDataSet1.AcceptChanges();
this.court0TableAdapter1.Fill(this.mycourtsDataSet1.Court0);
This did not happen with VS2005/CE3.01.
I have tried changing all references to decimal (or money in CE3.5) without luck.
I'm beginning to think that string may be the way to go!!!!!!!
Can someone shed some light on my problem.
Thanks,
Later:
It's necessary to update the datatable adapter as the 3.01 and 3.5 CE are not compatible.
COnverting Numeric Data Type (Oracle) To Date Data Type Using SSIS
Mar 7, 2007We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Regards
RH
Top 10 Type Of List
Mar 5, 2008I have this very simple table
--
-- Table structure for table `list`
--
CREATE TABLE IF NOT EXISTS `list` (
`idx_list` bigint(20) unsigned NOT NULL auto_increment,
`idx_users` bigint(20) unsigned NOT NULL,
`idx_items` bigint(20) unsigned NOT NULL,
`item_desc` text,
PRIMARY KEY (`idx_list`),
KEY `idx_user` (`idx_users`,`idx_items`),
FULLTEXT KEY `item_desc` (`item_desc`)
) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=48 ;
--
-- Dumping data for table `list`
--
INSERT INTO `list` (`idx_list`, `idx_users`, `idx_items`, `item_desc`) VALUES
(48, 9, 36, NULL),
(46, 3, 2, NULL),
(44, 4, 2, NULL),
(43, 4, 36, NULL),
(35, 5, 26, NULL),
(33, 5, 31, NULL),
(34, 5, 32, NULL),
(36, 5, 2, NULL),
(37, 5, 33, NULL),
(39, 5, 34, NULL),
(47, 3, 4, NULL);
so what I'm trying to do is make a "Top 10" kind of list. This table will eventually have a LOT more data in it.
I have no idea if there's even a way to write a query for this.
the list is supposed to be made up like this...
what ever 'idx_items' value is repeated the MOST is the top, whatever the next most repeated is 2nd, and so on.
i'd need data to come back something like...
each row having
idx_items
COUNT(idx_items)
sorry if i haven't described this very well
the list i want back from that data should be something like...
idx_items, count(idx_items)
2, count(3)
36, count(2)
26, count(1)
31, count(1)
32, count(1)
33, count(1)
34, count(1)
obviously this will work out better than that when there's more data, but that's the idea
the end query will be more complicated, but if someone can point me in the right direction i can take it from there!
ty in advance!
life is better without too much technology
The Conversion Of A Char Data Type To A Datetime Data Type!!
May 13, 2008hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
in my SQL database I have the date feild as datetime and the version as nvarchar(max)
this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient
Imports system.web.configuration
Partial Class Admin_emag_insert
Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Record_DateTextBox.Text = DateTime.Now
End Sub
Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click
Me.VersionTextBox.Text = ""
End Sub
Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click
Dim objConnection As SqlConnection
Dim objDataCommand As SqlCommand
Dim ConnectionString As String
Dim record_date As Date
Dim version As String
Dim emagSQL As String
'save form values in variables
record_date = Record_DateTextBox.Text
version = VersionTextBox.Text
ConnectionString = WebConfigurationManager.ConnectionStrings("HRDBConnectionString").ConnectionString
'Create and open the connection
objConnection = New SqlConnection(ConnectionString)
objConnection.Open()
emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _
"values('" & record_date & "','" & version & "')"
'Create and execute the command
objDataCommand = New SqlCommand(emagSQL, objConnection)
objDataCommand.ExecuteNonQuery()
objConnection.Close()
AddMessage.Text = "A new emagazine was added successfully"
Me.VersionTextBox.Text = ""
End Sub
End Class
Converting Numeric Data Type To Text Data Type
Jul 20, 2005Hi,I would like to convert a dollar amount ($1,500) to represent Fifteenhundred dollars and 00/100 cents only for SQL reporting purposes. Isthis possible and can I incorporate the statement into an existingleft outer join query.Thanks in advance,Gavin
View 1 Replies View RelatedChanging User Defined Data Type's Data Type
Sep 12, 2006Hi,
I have a user defined data type which is called DEmployeeName,
it's length is varchar(20), how do i change it into varchar(30) without droping it?
I'm using SQL server 2005.
Thanks in advance..
Convert Text Data Type To Smalldatetime Data Type
Oct 9, 2007I have a field that is currently stored as the data type nvarchar(10), and all of the data in this field is in the format mm/dd/yyyy or NULL. I want to convert this field to the smalldatetime data type. Is this possible?
I've tried to use cast in the following way, (rsbirthday is the field name, panelists is the table), but to no avail.
SELECT rsbirthday CAST(rsbirthday AS smalldatetime)
FROM panelists
the error returned is "incorrect syntax near 'rsbirthday'.
I'm rather new to all things SQL, so I only have the vaguest idea of what I'm actually doing.
Thanks for the help!
Allowing Users To Type In Characters In A Drop Down List?
Feb 6, 2007
is this even possible in reporting services? I already deployed reports for our client using Reporting Services 2000, one of their complaints was that the dropdownlist of the reports contains a very long list of data, this list cannot be shorten since all data are required. Is there a way to let the users type in characters, not only one character to find the exact data they want. The data in the drop down list are needed because these data are parameters.
Are there any web based reporting tools which can provide this kind of requirement?
Reporting Services :: Print Data With Blank Space And Move To Continue Data To Next Page
May 15, 2015I am using SQL Server report 2008/2012 (SSRS) and my report viewer contains body content with 3 Row groups.
While printing the report, Â data print with blank space and move to continue data to next page.Â
Departure flight : 70 rows
First Page           : 42 rows printed
Second Page     : 23  rows printed  [ Supposed to be print 28 ,  if the total count of records more than 23 and less than 42 then the page print only 23 records ]
Third Page          : 5 rows printed
Departure flight : 42 Â rows
First Page           : 42  rows printed [Report max. record allowed to print 42 rows so if total record is 42 then print perfectly ]
Departure flight : 26 rows
First Page           : 23 rows printed [Supposed to be print 26, if the total count of records more than 23 and less than 42 then the page print only 23 records ]
Second Page     : 3 rows printed
Transact SQL :: COLUMN NAME Conflicts With Type Of Other Columns Specified In UNPIVOT List
Jul 31, 2015I am trying to convert all columns to rows in sql, but giving an error.
SELECT Employee, Orders
FROM
(SELECT CisId, [Z_Id], [ModuleType]
FROM CIS) p
UNPIVOT
(Orders FOR Employee IN
(CisId, [Z_Id], [ModuleType])
)AS unpvt;
Error:Â The type of column "Z_Id" conflicts with the type of other columns specified in the UNPIVOT list.If I remove "Z_Id" from selection then giving same error for ModuleType also.
Getting Error : : The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value
Jan 28, 2008update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
View 5 Replies View RelatedSqlbulkcopy Error : The Given Value Of Type SqlDecimal From The Data Source Cannot Be Converted To Type Decimal Of The Specified
Apr 16, 2008Hi,
The table in SQL has column Availability Decimal (8,8)
Code in c# using sqlbulkcopy trying to insert values like 0.0000, 0.9999, 29.999 into the field Availability
we tried the datatype float , but it is converting values to scientific expressions€¦(eg: 8E-05) and the values displayed in reports are scientifc expressions which is not expected
we need to store values as is
Error:
base {System.SystemException} = {"The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column."}
"System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.ArgumentException: Parameter value '1.0000' is out of range.
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
at System.Data.SqlClient.SqlBulkCopy.WriteToServerInternal()
at System.Data.SqlClient.SqlBulkCopy.WriteRowSourceToServer(Int32 columnCount)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table, DataRowState rowState)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table)
at MS.Internal.MS
COM.AggregateRealTimeDataToSQL.SqlHelper.InsertDataIntoAppServerAvailPerMinute(String data, String appName, Int32 dateID, Int32 timeID) in C:\VSTS\MXPS Shared Services\RealTimeMonitoring\AggregateRealTimeDataToSQL\SQLHelper.cs:line 269"
Code in C#
SqlBulkCopy bulkCopy = new SqlBulkCopy(sqlConnection, SqlBulkCopyOptions.Default);
DataRow dr;
DataTable dt = new DataTable();
DataColumn dc;
try
{
dc = dt.Columns.Add("Availability", typeof(decimal));
€¦.
dr["Availability"] = Convert.ToDecimal(s[2]); ------ I tried SqlDecimal
€¦€¦€¦.
}
bulkCopy.DestinationTableName = "dbo.[Tbl_Fact_App_Server_AvailPerMinute]";
bulkCopy.WriteToServer(dt);
thx
Bulk Insert Task Failing On Data Type Conversion For A Destination Column Of Type Bit
Jul 6, 2006I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package3.dtsx" finished: Failure.
The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value.
Apr 19, 2008Advance thanks ....... My table is TimeSheet:----------------------------------- CREATE TABLE [dbo].[TimeSheet]( [autoid] [int] IDENTITY(1,1) NOT NULL, [UserId] [int] NOT NULL, [starttime] [datetime] NOT NULL, [endtime] [datetime] NOT NULL, [summary] [nvarchar](50) NOT NULL, [description] [nvarchar](50) NULL, [dtOfEntry] [datetime] NOT NULL, [Cancelled] [bit] NULL) ON [PRIMARY] My Query is------------------ insert into timesheet (UserId, StartTime,EndTime, Summary, Description,DtOfEntry) values (2, '19/04/2008 2:05:06 PM', '19/04/2008 2:05:06 PM', '66', '6666','19/04/2008 2:05:06 PM')i m not able to insert value Error Message is-------------------------Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated. can any body give any solution
View 5 Replies View RelatedThe Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value.
Aug 3, 2005Hey, I have a big problem that i wanna search data from SQL by DateTime like thatselect * from test where recorddate='MyVariableWhichHoldDate'i use variable that holds Date info.i searched a lot infomation on net but there is no perfect solution. i know why this occur but there is no function to solve this problem. i used a lot of ways. it accept yyyy-mm-dd format but my variable format is dd-mm-yyyyy . is there any function for this problem? and any other solution.thanks for ur attentionregards
View 6 Replies View RelatedThe Conversion Of Char Data Type To Smalldatetime Data Type Resulted In An Out-of-range Smalldatetime Value
Mar 30, 2007 I am using Visual Studio 2005 and SQL Express 2005. The database was converted from MS Access 2003 to SQL Express by using the upsize wizard.
I would like to store the current date & time in a column in a table. This column is a smalldatetime column called 'lastlogin'.
The code I'm using is:
Dim sqlcommand As New SqlCommand _
("UPDATE tableXYZ SET Loggedin = 'True', LastLogin = GetDate() WHERE employeeID = '" & intEmployeeID.ToString & "'", conn)
Try
conn.Open()
sqlcommand.ExecuteNonQuery()
conn.Close()
Catch ex As Exception
MessageBox.Show(ex.Message)
End Try
This code works fine on my local machine and local SQL server. However at the client side this code results in the error as mentioned in the subject of this thread. I first used 'datetime.now' instead of 'getdate()', but that caused the same error. Then I changed the code to 'getdate()', but the error still remains.
The server at the client is running Windows Server 2000 UK . My local machiine is running WIndows XP Dutch.
Maybe the conversion from Dutch to UK has something to do with it. But this should be solved by using the 'Getdate()' function..... ?
Connection Type Limitations When Using XML Data Type In SQL Task
Jul 23, 2007I'm trying to use the SSIS Execute SQL Task to pull XML from a SQL 2005 database table. The SQL is of the following form:
SELECT
(
SELECT
MT.MessageId 'MessageId',
MT.MessageType 'MessageType',
FROM MessageTable MT
ORDER BY MT.messageid desc
FOR XML PATH('MessageStatus'), TYPE
)
FOR XML PATH('Report'), TYPE
For some reason I can only get this query to work if I use an ADO.NET connection type. If I try to use something like the OLEDB connection I get the following error:
<ROOT><?MSSQLError HResult="0x80004005" Source="Microsoft XML Extensions to SQL Server" Description="No description provided"?></ROOT>
Can anyone tell me why the SELECT ... FOR XML PATH... seems only to work with ADO.NET connections?
Thanks
Walter
Print Barcodes With The Active X Print Control
Mar 2, 2007We are having problems printing Reports (when printing by clicking on the AcitiveX print control), where the font for the fields are set to "C39HrP24DhTt" (barcode).
While viewing the report it displays as Barcodes but while printing, the Barcode does not get printed, but the string gets printed.
Environment: SSRS 2005
Using the ReportViewer Control in a .Net 2.0 Web App to render the reports.
BarCodes print fine in the following situations:
1. When the Report is exported to Excel and when printed from there
2. When you click on the print button on Internet Explorer
3. When saving as html (from view source) and opening that html document and printing.
BarCodes do NOT get printed in the following situation:
1. When printing by clicking on the "Print" (Active X Control) icon. Even the "Print Preview" does not show the Barcode.
SqlDataSource.Select Error: Unable To Cast Object Of Type 'System.Data.DataView' To Type 'System.String'.
Oct 19, 2006I am trying to put the data from a field in my database into a row in a table using the SQLDataSource.Select statement. I am using the following code: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)But when I run the code, I get the following error:Server Error in '/YorZap' Application. Unable to cast object of type 'System.Data.DataView' to type 'System.String'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.Source Error: Line 54: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'"
Line 55: 'myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments).GetEnumerator.Current, String)
Line 56: myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)
Line 57:
Line 58: filesTable.Rows.Add(myDataRow)Source File: D:YorZapdir_list_sort.aspx Line: 56 Stack Trace: [InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.]
ASP.dir_list_sort_aspx.BindFileDataToGrid(String strSortField) in D:YorZapdir_list_sort.aspx:56
ASP.dir_list_sort_aspx.Page_Load(Object sender, EventArgs e) in D:YorZapdir_list_sort.aspx:7
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +13
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +45
System.Web.UI.Control.OnLoad(EventArgs e) +80
System.Web.UI.Control.LoadRecursive() +49
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3743
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210 Please help me!
Reporting Services From WebBrowser Control - Print = Unable To Load Client Print Control
Mar 20, 2007UPDATE #2: When it said "Do you want to install Microsoft SQL Server" I said "yes" and that caused it to work. I exited and re-ran and now the print runs w/o the "install SQL Server" (If the prompt had said "Do you want to install the print dialog" we wouldn't be having this discussion...)
UPDATE: After posting this i discovered that the same thing occurs when attempting to print the report direct from IE6: First a dialog pops up "Do you want to install this software?" Name: Microsoft SQL Server. When I click "Don't Install" I get the dialog "unable to load client print control." Since this happens direct from IE6 I suspect it's browser settings. I'll resume tomorrow and post a followup.
My WinForm C# app integrates Reporting Services by calling them from WebBrowser controls. The problem is attempts to print cause a dialog: "unable to load client print control."
I've read prior posts that say "enable Active-X in your browser" - I don't know how to do that from a WebBrowser control.
Any ideas how to support Reporting Services "Print" from within a WebBrowser control?
RELATED THREADS
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=332145&SiteID=1
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=264478&SiteID=1
Unable To Cast COM Object Of Type 'System.__ComObject' To Class Type 'System.Data.SqlClient.SqlConn
May 17, 2006Dear all,
I am stuck with a SSIS package and I can€™t work out. Let me know what steps are the correct in order to solve this.
At first I have just a Flat File Source and then Script Component, nothing else.
Error:
[Script Component [516]] Error: System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to class type 'System.Data.SqlClient.SqlConnection'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)
Script Code (from Script Component):
' Microsoft SQL Server Integration Services user script component
' This is your new script component in Microsoft Visual Basic .NET
' ScriptMain is the entrypoint class for script components
Imports System
Imports System.Data.SqlClient
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Public Class ScriptMain
Inherits UserComponent
Dim nDTS As IDTSConnectionManager90
Dim sqlConnecta As SqlConnection
Dim sqlComm As SqlCommand
Dim sqlParam As SqlParameter
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Dim valorColumna As String
Dim valorColumna10 As Double
valorColumna = Row.Column9.Substring(1, 1)
If valorColumna = "N" Then
valorColumna10 = -1 * CDbl(Row.Column10 / 100)
Else
valorColumna10 = CDbl(Row.Column10 / 100)
End If
Me.Output0Buffer.PORCRETEN = CDbl(Row.Column11 / 100)
Me.Output0Buffer.IMPRETEN = CDbl(Row.Column12 / 100)
Me.Output0Buffer.EJERCICIO = CInt(Row.Column2)
Me.Output0Buffer.CODPROV = CInt(Row.Column7)
Me.Output0Buffer.MODALIDAD = CInt(Row.Column8)
Me.Output0Buffer.NIFPERC = CStr(Row.Column3)
Me.Output0Buffer.NIFREP = CStr(Row.Column4)
Me.Output0Buffer.NOMBRE = CStr(Row.Column6)
Me.Output0Buffer.EJERDEV = CDbl(Row.Column13)
With sqlComm
.Parameters("@Ejercicio").Value = CInt(Row.Column2)
.Parameters("@NIFPerc").Value = CStr(Row.Column3)
.Parameters("@NIFReP").Value = CStr(Row.Column4)
.Parameters("@Nombre").Value = CStr(Row.Column6)
.Parameters("@CodProv").Value = CInt(Row.Column7)
.Parameters("@Modalidad").Value = CInt(Row.Column8)
.Parameters("@ImpBase").Value = valorColumna10
.Parameters("@PorcReten").Value = CDbl(Row.Column11 / 100)
.Parameters("@ImpReten").Value = CDbl(Row.Column12 / 100)
.Parameters("@EjerDev").Value = CDbl(Row.Column13)
.ExecuteNonQuery()
End With
End Sub
Public Overrides Sub AcquireConnections(ByVal Transaction As Object)
Dim nDTS As IDTSConnectionManager90 = Me.Connections.TablaMODELO80
sqlConnecta = CType(nDTS.AcquireConnection(Nothing), SqlConnection)
End Sub
Public Overrides Sub PreExecute()
sqlComm = New SqlCommand("INSERT INTO hac_modelo180(Ejercicio,NIFPerc,NIFReP,Nombre,CodProv,Modalidad,ImpBase,PorcReten,ImpReten,EjerDev) " & _
"VALUES(@Ejercicio,@NIFPerc,@NIFReP,@Nombre,@CodProv,@Modalidad,@ImpBase,@PorcReten,@ImpReten,@EjerDev)", sqlConnecta)
sqlParam = New SqlParameter("@Ejercicio", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFPerc", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFReP", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Nombre", Data.SqlDbType.VarChar)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@CodProv", Data.SqlDbType.TinyInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Modalidad", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpBase", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@PorcReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@EjerDev", Data.SqlDbType.Decimal)
sqlComm.Parameters.Add(sqlParam)
End Sub
Public Sub New()
End Sub
Public Overrides Sub ReleaseConnections()
nDts.ReleaseConnection(sqlConnecta)
End Sub
Protected Overrides Sub Finalize()
MyBase.Finalize()
End Sub
End Class
Thanks a lot for your help
@PARAM1 : Unable To Cast Object Of Type 'System.Data.SqlTypes.SqlInt32 To Type System.IConvertable
Apr 23, 2007I get the following message in the vs2005 querybuilder when i do a preview:
***********************************
SQL Execution Error.
Executed SQL statement: SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = @PARAM1)
Error Source: SQL Server Compact Edition ADO.NET Data Provider
Error Message: @PARAM1 : Unable to cast object of type 'System.Data.SqlTypes.SqlInt32 to type System.IConvertable'.
****************************************
The same querypreview works fine without the parameter:
SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = 186)
Can anybody tell me why this is?
And tell me a way to get the tableadapter working?
Anne-Jan Tuinstra
Print Preview Pagination For Multipage Data In Single Text Box
Dec 19, 2005I have a tried two different reports one with table and the other without The last textbox in both reports contains enough text which should fill half of first page and half of second page. In both reports the print preview and export to PDF keeps the first page blank and puts all the data in the second page. It appears that the textbox control doesn't know when to place a pagebreak when in print preview and export to PDF. The rdl file has no pagebreaks defined anywhere. Thanks in advance for your help!
Automatic Extract Data From Database, Then Generate A Report && Print It Directly
May 7, 2008hi lads,
what i need to do for my project are as following:
a mobile user send data via GPRS to SQL server Database. then i need to have a method to detect while a particular table is being inserted. and then extract data from table construct a report dynamiclly. what should i do to achieve this goal? e.g. window application, store procedure or trigger ?
PS : client side is a mobile application developed using MCL. i don't in which way he will send all data to SQL server Database, so what i need to do is to monitor new data inserting.
2) how to auto generate and print report directly after record been inserted into the table ? Do i need to import report web service API ? if yes, which one? or i can use other methods e.g. predefine report control view in my window application, turn off pop-up menu while printing a report(I guess)
thanks
Reporting Services :: Report Exported To Excel - In Print Preview Footer Text Box Data Truncated
May 6, 2015I am exporting SSRS report to Excel I am aware that excel doesn't show footer , It shows in print preview but my footer has text box which have text disclaimer more than 255 characters, the data getting truncated.
View 3 Replies View RelatedHow To Convert To Regular Text, Data Stored In Image Data Type Field ????
Jul 20, 2005Hi,This is driving me nuts, I have a table that stores notes regarding anoperation in an IMAGE data type field in MS SQL Server 2000.I can read and write no problem using Access using the StrConv function andI can Update the field correctly in T-SQL using:DECLARE @ptrval varbinary(16)SELECT @ptrval = TEXTPTR(BITS_data)FROM mytable_BINARY WHERE ID = 'RB215'WRITETEXT OPERATION_BINARY.BITS @ptrval 'My notes for this operation'However, I just can not seem to be able to convert back to text theinformation once it is stored using T-SQL.My selects keep returning bin data.How to do this! Thanks for your help.SD
View 1 Replies View RelatedData Access :: Arithmetic Overflow Error Converting Expression To Data Type Int
Jul 24, 2015When I execute the below stored procedure I get the error that "Arithmetic overflow error converting expression to data type int".
USE [FileSharing]
GO
/****** Object: StoredProcedure [dbo].[xlaAFSsp_reports] Script Date: 24.07.2015 17:04:10 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[Code] .....
Msg 8115, Level 16, State 2, Procedure xlaAFSsp_reports, Line 25
Arithmetic overflow error converting expression to data type int.
The statement has been terminated.
(1 row(s) affected)