How To Put Only Time Data In Column?
Feb 28, 2007I know there is a DateTime data type in SQL server 2000.
But is there a way to only stor time value (hh:mm:ss)?
ADVERTISEMENT
How To Create Key Time Column And Key Column For A Case Table And A Nested Table For Time Series Algorithm?
Jun 18, 2007Hi, all experts here,
Thanks for your kind attention.
I want to use time series algorithm to mine data from my case table and nested table. Case table is Date table, while nested table is the fact table. E.g, I want to predict the monthly sales amount for different region (I have region table related to the fact table), how can I achieve this?
Thanks a lot and I hope it is clear for your help and I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
Questions On Key Column In Case Table And Key Time Column In Nested Table Using Time Series Algorithm
Jun 4, 2007Hi, all experts here,
Thank you very much for your kind attention.
I am confused on key column of case table and key time column of nested table by using Time Series algorithm.
In my case, the case table structure is as below:
Territory key text (the ID is actually dimrisk_key, in this case, I use the name column binding to combine the Territory column of case table Dimrisks),
While the nested table structure is as below:
Cal_month key time (in this case, actually the ID is dimdate_key, again, I used name column bining property to bind the Cal_month to the ID)
So my question is, as the key column of case table has been set to be Territory, as a result, does the model training still cover all the cases (rows) based on the ID of the table?
Also, in the nested table, as the key time column has been set to Cal_month rather than Dimdate_key of the nested table, as a result, would the single series based on the cal_month?
Hope it is clear for your advices and help.
And I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
Splitting SQL Server Date/Time Column Into Access Date Column And Access Time Column
Jan 24, 2008I have an SSIS package that moves data from SQL Server to an legacy Access database. In SQL Server, there is a date/time column that I need to split into a separate date column and time column in the access database. Initially I just created a derrived column for the time and set the expression equal to the source date/time column from SQL Server. Unfortunately, that just makes the date column and time column the same having the full date/time.
What expression can I use during a derrived column transformation to assign just the date to a derrived column and just the time to another derrived column?
Thanks,
Steve
Key Time Column For Time Series Algorithm
May 31, 2007Hi, all experts here,
Thank you very much for your kind attention.
I am confused on key time column selection. e.g, I want to predict monthly sales amount, then what column in date dimension should I choose to be the key time column? Is it calendar_date (the key of date dimension) column or calendar_month?
Thanks a lot for your kind advices and help and I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
Transact SQL :: Calculate DateTime Column By Merging Values From Date Column And Only Time Part Of DateTime Column?
Aug 3, 2015How can I calculate a DateTime column by merging values from a Date column and only the time part of a DateTime column?
View 5 Replies View RelatedGetting Time From Date/time Column
May 16, 2008How can I obtain just the time portion from a date/time column?
My data contains "2008-05-19 09:30:00.000"
Actually, all I want/need is the hh:mm part of it.
Thanks,
Walt
SQL 2012 :: Accurate Sorting Data Each Time With Millions Of Records Without Time Field?
Apr 25, 2014Sample Table
USE [Testing]
GO
/****** Object: Table [dbo].[Testing] Script Date: 4/25/2014 11:08:18 AM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[Code] ....
It seems to work fine with one million records.
Each primary key is unique, but the begindate is non-unique, and i guess even if i use datetime2 and add nanoseconds, from what i have read, there is a chance that i could have a duplicate datetime since the date is imported via XML from multiple sources.
SQL Server 2008 :: Displaying Transaction Time Punch Data In A Time Card Form?
Oct 7, 2015I have a table called employee_punch_record that we use to store employee time clock punches.
The columns are:
employeeid,
punch_timestamp,
punch_type (In / Out),
closed (bit used as status for open or closed pay periods),
ident
Here are some examples of a record:
bkingery62015-10-06 16:59:04.000In0
bkingery72015-10-06 16:59:09.000Out0
bkingery82015-10-06 16:59:13.000In0
bkingery92015-10-06 18:22:44.000Out0
bkingery102015-10-06 18:22:46.000In0
bkingery112015-10-06 18:22:48.000Out0
bkingery122015-10-06 18:22:51.000In0
tfeller52015-10-05 17:00:05.000In0
We are using SQL Server 2008 as our database and use Access as a GUI. I am looking to create a form in Access where employees can access their time card and request changes from management. I want to use the format from the attached screen shot for the form. I pretty much know how to do it all, the only point of complication is trying to figure out the easiest way to get the transaction punch record data on employee_punch_record into a format where I can easily populate the form in the horizontal format you see in the screen shot.
I am not super strong in SQL, but figure I can do it using a formatting table of some sort. quick and easy way to move transaction records into a more horizontally oriented record?
Adding A Time Column To A Date Column
Jul 20, 2005I have two columns in a table:StartDate DateTime and StartTime DateTime.The StartDate column holds a value such as 07/16/2004The StartTime column holds a value such as 3:00:00 PMI want to be able to add them in a stored procedure.When I use StartDate + StartTime I get a date two days earlier than expected.For example, instead of 7/16/2004 3:00:00 PM StartDate + StartTime returns7/14/2004 3:00:00 PM.Can anyone point out wht I'm doing wrong with this one?Thanks,lq
View 2 Replies View RelatedT-SQL (SS2K8) :: Use Previous Month Data In Column As Following Months Data Different Column
Aug 20, 2014I have a table with Million plus records. Due to Running Totals article, I have been able to calculate the Trial_Balance for all months.
Now I am trying to provide a Beginning Balance for all months and the Logic is the Beginning Balance of July would be the Trial_Balance of June. I need to be able to do this for multiple account types. So the two datasets that need to be included in logic is actindx and Calendar_Month.
For actindx of 2 and Calendar_Month of 2014-01-01The Trial_Balance_Debit is 19585.46 This would make the Beginning_Balance of actindx 2 and Calendar_Month of 2014-02-01 19585.46
I am trying to do some type of self join, but not sure how to include each actindx number differently.
Table creation and data insert is below.
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[TrialBalance](
[Trial_Balance_ID] [int] IDENTITY(1,1) NOT NULL,
[Code] ....
Get Time From Column
Jun 10, 2008Trying to get the records where the date = today and the time is only
within 15 mintues
So if the time was 10:20 i only get records 2 and 3
COLUMN STAT_DATE
1.2008-06-10T10:30:00.537
2.2008-06-10T10:15:00.530
3.2008-06-10T10:00:00.760
Strange Problem With Time Series Data On Time Series Chart
May 31, 2007Hi, all experts here,
Thank you very much for your kind attention.
I encountered a very strange problem again. Why the time series displayed on the chart are so strange? The Key time column I chose for my time series algorithm is cal_month(e.g 199001...), but why the date displayed on the time series chart is like :05/06/2448? (it should be like 199001..?) What is that data? And where exactly did it come from? What is the exact cause of this?
Hope it is clear for your help.
I am really confused on this and thanks a lot for your kind advices and help and I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
Time Out Of DateTime Column
Jun 18, 2001Hi Guys,
I have to take only time from DateTime column filed value.
Is there any function in SQL Server which will give us time only.
Thanks,
Rau
How To Get Table Column Name At Run Time
Jun 18, 2008I want to get a table column name at run time through query. Can any one help me.
ehsan ulhaq dar
Date And Time In Same Column
Oct 24, 2013I have a column of data that is in this format (quotes to communicate it is in one cell if viewed in excel):
"8/18/2013 23:58"
Essentially, I have the date and time in one entry.... how do I go about querying, using SQL, the following?
- all data that is less than a specific date (I don't care about time)?
- differences in time (subtracting time, while not caring about date)?
I can do it if the date and time were in different columns, but they are together and I am stuck.
Package Run Time Into Column
Jun 21, 2007how can i get the package execution start or end time along with DATE as a derived column into the output table.
i tryed using getdate() as expression but it gives diff time as my pkg runs in a loop.
and i see a sys variable STARTTIME which just gives time.
any help appriciated
thanks
Small Date/time Column
Apr 24, 2001I have a smalldatetime column. When I did
SELECT * INTO MY_TABLE FROM YOUR_TABLE
WHERE CONVERT(VARCHAR(12), DATE_ENTERED, 101) > '01/01/2001' rows from 1998, 1999 came over.
Ideas !
Thanks,
John
Select Into And Add Ident Column At Same Time?
Jul 31, 2000Hi,
I am doing Select into to make a table (I want to skip the log), but I want to add an IDent column to the new table. Can I do this somehow in the Select into? I have tried a couple of approaches, but have come up short....
Thanks,
Judith
Default Date And Time For Column
Jul 26, 2005Hi,
How do I design a table column named UpdateDate that will give the default date and time upon inserting a record into the table
I'm using Enterprise Manager in MSSQL
Many Thanks
Column In Table - Text To Time
Sep 19, 2013I have the following time value column in a table:
next_run_time
230000
73000
70000
The above actually translates to 23:00, 7:00AM,7:30AM, etc. How can I convert this into a meaningful time value?
[CODE]
SELECT NEXT_RUN_TIME FROM TABLE T1
[CODE]
Time Diff Between 2 Values In The Same Column?
Aug 27, 2006Here is the sample data
nType dCDServerTime
02006-05-12 03:50:46.770
12006-05-12 04:00:59.153
962006-05-12 04:01:23.827
962006-05-12 04:16:01.297
142006-05-15 05:02:46.857
202006-06-23 03:23:36.970
I am trying to find the time diff between dCDServerTime of the "first" ntype = 1 and the "first" ntype = 96. There can be any number of rows with 1 and 96 but rows with 1 always come before those with 96.
I tried by putting a subset of the above result into a table variable but don't seem to get ahead without declaring more variables.
declare @t table
(Type int, ServerTime datetime)
insert into @t
select top 1 nType,dCDServerTime from tblEvent
where nGlobalCaseID = 11901643 and nType = 1
UNION
select top 1 nType,dCDServerTime from tblEvent
where nGlobalCaseID = 11901643 and nType = 96
select * from @t
Is it possible to do it with a single select?
Adding The Same Column To A Model More Than One Time
Jan 11, 2007I know that I can add a column to a mining structure and/or model more than once using XMLA. However, I am having a problem doing the same using DMX. I now that DMX does not support data binding and that it relies on the INSERT INTO... construct to essentially map the structure columns to the incoming comluns from the data source. I tried to use "AS" like I would in SQL but it doesn't seem to like it.
Can anyone confirm that this can only be done using XMLA and not DMX? If I am mistaken, it would be greatly appreciated if you could provide an example on how to do this using DMX.
For background on why I would want to add the same column to a model more than once please read this post.
Thanks.
Data Access :: How To Load Data From CSV File In Temp Table At Run Time
May 28, 2015how I can load the CSV file data into the sql server table. I know there are ways like bulk insert and other to load the csv file data into the table. But in my case the table doesn't exist and has to be created at the run time. With simple insert in temp table we do like select * into #temp from tablename and that creates the temp table. So. I need something like that which create the temp table and load the data into it. because the CSV file would have different number of columns and names so I can not create the table structure in advance. I have to create the table at run time.
View 3 Replies View RelatedUpdate Column With Sequence Number Every Time
Sep 25, 2006hello friends
i want to update one column from my table regularly on sequence number i.e. 0,1,2,3,4,5
i created procedure but it is not working as per my output
declare @IndexIDGen int
declare @ID int
set @ID = 0
update temp_test set indexid = NULL
declare IndexIDGen cursor for select indexid from temp_test
open IndexIDGen
FETCH Next from IndexIDGen into @IndexIDGen
while @@fetch_status = 0
begin
update temp_test set indexid = @ID where indexid is null
set @ID = @ID + 1
print @id
fetch next from IndexIDGen into @IndexIDGen
end
close IndexIDGen
deallocate IndexIDGen
where i am going in wrong direction ??????
T.I.A
[Resolved] Change Column Value At Time Of Insert
Jan 29, 2008Prior to insert (into #JobListTable) I need to change the value of the 't2.plant_id' column (from #EquentialJobListTable). This column will have a value of 110, 300 or 320. If 110 then value should be SBGB2, if 300 then values should be RGWP and if 320 value should be RGWP. Is this possible to do?
INSERT#JobListTable
(
job_date,
job_number,
job_phase,
qty_received,
plant_id
)
SELECTt2.job_date,
t2.job_number,
t2.job_phase,
t2.qty_received,
t2.plant_id
FROM#EquentialJobListTable AS t2
LEFT JOIN#JobListTable AS t1 ON t1.job_date = t2.job_date
AND t1.job_number = t2.job_number
AND t1.job_phase = t2.job_phase
WHEREt1.job_date IS NULL
Transact SQL :: Time Column With Order Wise
Nov 17, 2015I have a table like below
CREATE table #TempTable (ID integer,CTime time(7),CType Varchar(1))
insert into #TempTable VALUES (1001,'16:50:05.0000000','I')
insert into #TempTable VALUES (1001,'13:27:49.0000000','O')
insert into #TempTable VALUES (1001,'20:44:00.0000000','O')
insert into #TempTable VALUES (1001,'21:12:00.0000000','O')
I need result like below screen shot
here 'I' stands for In,and 'O' for Out, in this example first In time not available
Transact SQL :: Total Difference Time In Last Column?
May 23, 2015I have the below query
DECLARE @GivenDate DATE='2015-05-13'
create table #table (LedgerID int,AttDate Date, checkedtime time,checkedtype varchar(1))
insert into #table (LedgerID,AttDate,checkedtime,checkedtype) values (1232,'2015-05-13','09:01:48.0000000','I')
insert into #table (LedgerID,AttDate,checkedtime,checkedtype) values (1232,'2015-05-13','13:05:52.0000000','O')
insert into #table (LedgerID,AttDate,checkedtime,checkedtype) values (1232,'2015-05-13','14:10:25.0000000','I')
[code]....
the result is like below
i need 'TotalDiffernceTime' column as new column (OUT1-IN1)+(OUT2-IN2).
i am using SQLServer 2008 R2
Transact SQL :: Getting Time Difference Between Same Column In Different Rows
Jun 21, 2015I have a table data like below
id type timestamp
1001 start1 10:34:23:545
1001 start2 10:34:24:545
1001 end2 10:34:24:845
1001 end1 10:34:25:545
1002 start1 10:34:25:645
1002 start2 10:34:25:745
1002 end2 10:34:25:945
1002 end1 10:34:25:965
I need the result as follows
id millisecond diff start1end1 millisecond diff start2end2
1001 end1 timestamp-start1 timestamp end2 timestamp-start2 timestamp
1002 end1 timestamp-start1 timestamp end2 timestamp-start2 timestamp
SQL Server 2008 R2
Transact SQL :: Sum Time Column After Pivot Query
May 18, 2015i have a table like below,
CREATE TABLE #ATTTABLE
(
Name VARCHAR(20),
AttDate DATE,
PresntTime TIME
[code]....
and then i pivot table by date as column wise using the below query and also displays total time by rowswise
SELECT t1.*, t2.Total
FROM (
SELECT name,[2015-08-01],[2015-08-02]
FROM (
SELECT name, AttDate,PresentTime
[code]....
now what i need is to display sum of time at last row as well, means total time of against date
SQL Server 2008 :: Time Difference With Dates In Same Column
Mar 17, 2015How do I find the time difference when the dates are in one column? I need to find hours and minutes between each row.
CREATE TABLE #Time ([TimeStamp] DATETIME, TimeDiff INT)
INSERT INTO #Time (TimeStamp)
VALUES ('2014-09-02 07:51:02.810'), ('2014-09-02 07:48:09.567'), ('2014-09-02 08:37:09.647')
, ('2014-09-02 16:16:42.593'), ('2014-09-02 08:06:13.387'),('2014-09-02 14:32:00.113')
DROP TABLE #Time
Column Alias Asthe Current Time Stamp
Oct 18, 2007Hey All,
I am new to programming in SQL developer and I was hoping one of you kind salmon of knowledge could help me
I am running an SQL script every 15 minutes to pull data. I would like to insert the results into a column in a table. I have two issues:
1.How can I give the result column the current time stamp as an alias?
2.How can I add this column to the results table (I know its Alter table but do I put this into the insert sql?)
I would appreciate any help possible
Thanks
Transact SQL :: How To Set Case Sensitivity Of A Column In Design Time
Aug 3, 2015With Sql Server Management Studio, while creating/modifying a table I want to specify one of its columns to store values in lower case only. Can it be done through the designer or by some other means?
N.B.: Using SQL Server 2005.