I want to query XML datas.
I have one table T.this T has two columns,id int , datasXML xml.
the datasXML has some XML datas, there into one data is:
<root>
<item val="true"></item>
<others ... />
</root>
Now,I want to query this table's datasXML column,and root/item value is true.
How to design this SQL string?
SELECT * FROM T WHERE datasXML = "<root>.." -- or other?
Please give me some samples.thanks!
Ray Lynn
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedAfter testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
Hi All
I want to retrieve the data type of table column and validate the input data whether same as data type of table column before insert into database. Any suggestion?
I use asp.net + msde
Thank you.
Hi everyone,
I’ve got a small question: Is it possible to change the Column_Name – Data Type from a SQL table with a query?
I want to do this with a query.
The Data Type ‘ntext’ must be changed to ‘text’
Thanks in advance!
Hi,
I can populate a dataTable with type double (C#) of say '1055.01' however when I save these to the CE3.5 database using a float(CE3.5) I lose the decimal portion. The 'offending' code is:
this.court0TableAdapter1.Update(this.mycourtsDataSet1.Court0);
this.mycourtsDataSet1.AcceptChanges();
this.court0TableAdapter1.Fill(this.mycourtsDataSet1.Court0);
This did not happen with VS2005/CE3.01.
I have tried changing all references to decimal (or money in CE3.5) without luck.
I'm beginning to think that string may be the way to go!!!!!!!
Can someone shed some light on my problem.
Thanks,
Later:
It's necessary to update the datatable adapter as the 3.01 and 3.5 CE are not compatible.
We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Regards
RH
I am using the following approach to enable dynamic date calculations: [URL] ...
However, some measures I work with are percentages (not numeric values) and demand a different formula.
See example snippet bellow (first IIF statement)
/*Calendar*/
[Date Calculation].[Calculation].[Calendar Actual versus PY WK %] =
IIF
(
[measures].Name = "HSP2 %", -- < ThIs is where I am trying to check if the measure is a percetgae type
0, -- < When this is the case then do something different
[Code] ....
I am trying to access the metadata. I am aware of $system.mdschema_measures but I am unable to utulize this for my case.
Hi guys....
View 10 Replies View RelatedIs there a way to query all the columns in a database that have the data type as Integer.
View 9 Replies View RelatedI have to display the data in the below said formats..Current sample Data in the table and the data type is numeric(23,10)
50.00
0.50
0.00
0.00
To be displayed in the below format
1.25
0.75
0
0
1
I have to map this column in teh report and should dipslay like above.I think if 0.00 is available then it should display as 0..If 1.0 is available then it should display 1.Any value that has postive number after the decimal should display all the values  example : 2.25,3.75,5.06, So in general the solution to display values like 1.75,1,0 we should not dispaly 0 as 0.00 and 1 as 1.00 and 2 as 2.00 and so on...Any Solutions in terms of SQL query  or SSRS expression.
Hey im trying to store a category name and the date into a database. For some reason i keep getting this error
Implicit conversion from data type datetime to int is not allowed. Use the CONVERT function to run this query.
This error is the error im getting back from the database. the datetime field in the database is a datatype (DateTime) so what exactly is going on ?protected void InsertNewCat_Click(object sender, EventArgs e)
{ string insertSql = "INSERT into Category (CategoryName,Date) VALUES (@Category, @Date)";
string conString = WebConfigurationManager.ConnectionStrings["ProCo"].ConnectionString; SqlConnection con = new SqlConnection(conString);
SqlCommand cmd = new SqlCommand(insertSql, con); cmd.Parameters.AddWithValue("@Category", NewCat.Text);
cmd.Parameters.AddWithValue("@Date",DateTime.Now);
try
{
con.Open(); int update = cmd.ExecuteNonQuery(); CatInsertStatus.Text = update.ToString() + " record updated.";
}catch (Exception Err)
{
CatInsertStatus.Text = Err.Message;
}
finally
{
con.Close();
}
}
this data. need help
Sort following numbers by asc and desc order
Before query sort
-1.1
-8.8
-15.5
0.0
+0.5
+0.2
Sort asc
+0.5
+0.2
0.0
-1.1
-8.8
Sort Desc
-8.8
-1.1
0.0
+0.2
+0.5
hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
in my SQL database I have the date feild as datetime and the version as nvarchar(max)
this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient
Imports system.web.configuration
Partial Class Admin_emag_insert
Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Record_DateTextBox.Text = DateTime.Now
End Sub
Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click
Me.VersionTextBox.Text = ""
End Sub
Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click
Dim objConnection As SqlConnection
Dim objDataCommand As SqlCommand
Dim ConnectionString As String
Dim record_date As Date
Dim version As String
Dim emagSQL As String
'save form values in variables
record_date = Record_DateTextBox.Text
version = VersionTextBox.Text
ConnectionString = WebConfigurationManager.ConnectionStrings("HRDBConnectionString").ConnectionString
'Create and open the connection
objConnection = New SqlConnection(ConnectionString)
objConnection.Open()
emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _
"values('" & record_date & "','" & version & "')"
'Create and execute the command
objDataCommand = New SqlCommand(emagSQL, objConnection)
objDataCommand.ExecuteNonQuery()
objConnection.Close()
AddMessage.Text = "A new emagazine was added successfully"
Me.VersionTextBox.Text = ""
End Sub
End Class
Hi,I would like to convert a dollar amount ($1,500) to represent Fifteenhundred dollars and 00/100 cents only for SQL reporting purposes. Isthis possible and can I incorporate the statement into an existingleft outer join query.Thanks in advance,Gavin
View 1 Replies View RelatedHi,
I have a user defined data type which is called DEmployeeName,
it's length is varchar(20), how do i change it into varchar(30) without droping it?
I'm using SQL server 2005.
Thanks in advance..
I have a field that is currently stored as the data type nvarchar(10), and all of the data in this field is in the format mm/dd/yyyy or NULL. I want to convert this field to the smalldatetime data type. Is this possible?
I've tried to use cast in the following way, (rsbirthday is the field name, panelists is the table), but to no avail.
SELECT rsbirthday CAST(rsbirthday AS smalldatetime)
FROM panelists
the error returned is "incorrect syntax near 'rsbirthday'.
I'm rather new to all things SQL, so I only have the vaguest idea of what I'm actually doing.
Thanks for the help!
Hello Guys,Have been getting this error(
Implicit conversion from data type ntext to varchar is not allowed. Use the CONVERT function to run this query.
) when running on the live environment but it was fine when run locally. If anyone has similar problem please let me know the fix you have done.
Thank you.
I have the following code and i want to passed more than one value:
DECLARE @myvendedor AS varchar(255)
SET @myvendedor = '87,30'
print @myvendedor
SELECT top 10 ECOM.COM1,* from ecom (nolock) WHERE ecom.PORVEND=1 AND ECOM.VENDEDOR IN (@myvendedor)
Table Field ECOM.VENDEDOR is Numeric(4,0)
This error occur:
87,30 --Result of PRINT
Msg 8114, Level 16, State 5, Line 6
Error converting data type varchar to numeric.
I change :
DECLARE @myvendedor AS numeric(4,0)
and this error appear:
Msg 8114, Level 16, State 5, Line 2
Error converting data type varchar to numeric.
Happy Friday!
A while since I have posted a question, and this one is probably real easy.
I am trying to store numeric values from a php form in MSSQL 2000 database. However, the columns are set to float and if the value is 1.00, when entered into the table it is saved as 1
If I change the column type to money, the query fails, with an error message of conversion of datatype varchar to datatype money statement terminated.
anybody know what I need to do? do I need to do something in my query to specify that this is NOT varchar data?
Im getting this error below when I try to do an insert into my database. I have no idea why this is happening, please help!this is my sqldatasource:<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:myConnectionString %>" DeleteCommand="DELETE FROM [tblDiaryEntries] WHERE [DiaryEntryID] = @DiaryEntryID" InsertCommand="INSERT INTO [tblDiaryEntries] ([DiaryEntry], [Subject], [EntryDate], [UserId]) VALUES (@DiaryEntry, @Subject, @EntryDate, @UserId)" SelectCommand="SELECT [DiaryEntry], [Subject], [EntryDate], [DiaryEntryID], [UserId] FROM [tblDiaryEntries]" UpdateCommand="UPDATE [tblDiaryEntries] SET [DiaryEntry] = @DiaryEntry, [Subject] = @Subject, [EntryDate] = @EntryDate, [UserId] = @UserId WHERE [DiaryEntryID] = @DiaryEntryID"> <DeleteParameters> <asp:Parameter Name="DiaryEntryID" Type="Int32" /> </DeleteParameters> <UpdateParameters> <asp:Parameter Name="DiaryEntry" Type="String" /> <asp:Parameter Name="Subject" Type="String" /> <asp:Parameter Name="EntryDate" Type="String" /> <asp:Parameter Name="UserId" Type="Object" /> <asp:Parameter Name="DiaryEntryID" Type="Int32" /> </UpdateParameters> <InsertParameters> <asp:Parameter Name="DiaryEntry" Type="String" /> <asp:Parameter Name="Subject" Type="String" /> <asp:Parameter Name="EntryDate" Type="String" /> <asp:Parameter Name="UserId" Type="Object" /> </InsertParameters> </asp:SqlDataSource> Am I doing something wrong?
Server Error in '/mine' Application.
Implicit conversion from data type sql_variant to uniqueidentifier is not
allowed. Use the CONVERT function to run this query. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: Implicit conversion from data type
sql_variant to uniqueidentifier is not allowed. Use the CONVERT function to run
this query.Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): Implicit conversion from data type sql_variant to uniqueidentifier is not allowed. Use the CONVERT function to run this query.] System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +859322 System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +736198 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1959 System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +149 System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +903 System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +132 System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +415 System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +135 System.Web.UI.WebControls.SqlDataSourceView.ExecuteDbCommand(DbCommand command, DataSourceOperation operation) +401 System.Web.UI.WebControls.SqlDataSourceView.ExecuteInsert(IDictionary values) +447 System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) +72 System.Web.UI.WebControls.DetailsView.HandleInsert(String commandArg, Boolean causesValidation) +390 System.Web.UI.WebControls.DetailsView.HandleEvent(EventArgs e, Boolean causesValidation, String validationGroup) +623 System.Web.UI.WebControls.DetailsView.OnBubbleEvent(Object source, EventArgs e) +95 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.DetailsViewRow.OnBubbleEvent(Object source, EventArgs e) +109 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.LinkButton.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.LinkButton.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.LinkButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +174 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Version Information: Microsoft .NET Framework Version:2.0.50727.312;
ASP.NET Version:2.0.50727.833
update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
View 5 Replies View RelatedHi,
The table in SQL has column Availability Decimal (8,8)
Code in c# using sqlbulkcopy trying to insert values like 0.0000, 0.9999, 29.999 into the field Availability
we tried the datatype float , but it is converting values to scientific expressions€¦(eg: 8E-05) and the values displayed in reports are scientifc expressions which is not expected
we need to store values as is
Error:
base {System.SystemException} = {"The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column."}
"System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.ArgumentException: Parameter value '1.0000' is out of range.
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
at System.Data.SqlClient.SqlBulkCopy.WriteToServerInternal()
at System.Data.SqlClient.SqlBulkCopy.WriteRowSourceToServer(Int32 columnCount)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table, DataRowState rowState)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table)
at MS.Internal.MS
COM.AggregateRealTimeDataToSQL.SqlHelper.InsertDataIntoAppServerAvailPerMinute(String data, String appName, Int32 dateID, Int32 timeID) in C:\VSTS\MXPS Shared Services\RealTimeMonitoring\AggregateRealTimeDataToSQL\SQLHelper.cs:line 269"
Code in C#
SqlBulkCopy bulkCopy = new SqlBulkCopy(sqlConnection, SqlBulkCopyOptions.Default);
DataRow dr;
DataTable dt = new DataTable();
DataColumn dc;
try
{
dc = dt.Columns.Add("Availability", typeof(decimal));
€¦.
dr["Availability"] = Convert.ToDecimal(s[2]); ------ I tried SqlDecimal
€¦€¦€¦.
}
bulkCopy.DestinationTableName = "dbo.[Tbl_Fact_App_Server_AvailPerMinute]";
bulkCopy.WriteToServer(dt);
thx
I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package3.dtsx" finished: Failure.
Advance thanks ....... My table is TimeSheet:----------------------------------- CREATE TABLE [dbo].[TimeSheet]( [autoid] [int] IDENTITY(1,1) NOT NULL, [UserId] [int] NOT NULL, [starttime] [datetime] NOT NULL, [endtime] [datetime] NOT NULL, [summary] [nvarchar](50) NOT NULL, [description] [nvarchar](50) NULL, [dtOfEntry] [datetime] NOT NULL, [Cancelled] [bit] NULL) ON [PRIMARY] My Query is------------------ insert into timesheet (UserId, StartTime,EndTime, Summary, Description,DtOfEntry) values (2, '19/04/2008 2:05:06 PM', '19/04/2008 2:05:06 PM', '66', '6666','19/04/2008 2:05:06 PM')i m not able to insert value Error Message is-------------------------Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated. can any body give any solution
View 5 Replies View RelatedHey, I have a big problem that i wanna search data from SQL by DateTime like thatselect * from test where recorddate='MyVariableWhichHoldDate'i use variable that holds Date info.i searched a lot infomation on net but there is no perfect solution. i know why this occur but there is no function to solve this problem. i used a lot of ways. it accept yyyy-mm-dd format but my variable format is dd-mm-yyyyy . is there any function for this problem? and any other solution.thanks for ur attentionregards
View 6 Replies View Related I am using Visual Studio 2005 and SQL Express 2005. The database was converted from MS Access 2003 to SQL Express by using the upsize wizard.
I would like to store the current date & time in a column in a table. This column is a smalldatetime column called 'lastlogin'.
The code I'm using is:
Dim sqlcommand As New SqlCommand _
("UPDATE tableXYZ SET Loggedin = 'True', LastLogin = GetDate() WHERE employeeID = '" & intEmployeeID.ToString & "'", conn)
Try
conn.Open()
sqlcommand.ExecuteNonQuery()
conn.Close()
Catch ex As Exception
MessageBox.Show(ex.Message)
End Try
This code works fine on my local machine and local SQL server. However at the client side this code results in the error as mentioned in the subject of this thread. I first used 'datetime.now' instead of 'getdate()', but that caused the same error. Then I changed the code to 'getdate()', but the error still remains.
The server at the client is running Windows Server 2000 UK . My local machiine is running WIndows XP Dutch.
Maybe the conversion from Dutch to UK has something to do with it. But this should be solved by using the 'Getdate()' function..... ?
I'm trying to use the SSIS Execute SQL Task to pull XML from a SQL 2005 database table. The SQL is of the following form:
SELECT
(
SELECT
MT.MessageId 'MessageId',
MT.MessageType 'MessageType',
FROM MessageTable MT
ORDER BY MT.messageid desc
FOR XML PATH('MessageStatus'), TYPE
)
FOR XML PATH('Report'), TYPE
For some reason I can only get this query to work if I use an ADO.NET connection type. If I try to use something like the OLEDB connection I get the following error:
<ROOT><?MSSQLError HResult="0x80004005" Source="Microsoft XML Extensions to SQL Server" Description="No description provided"?></ROOT>
Can anyone tell me why the SELECT ... FOR XML PATH... seems only to work with ADO.NET connections?
Thanks
Walter
I am trying to put the data from a field in my database into a row in a table using the SQLDataSource.Select statement. I am using the following code: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)But when I run the code, I get the following error:Server Error in '/YorZap' Application. Unable to cast object of type 'System.Data.DataView' to type 'System.String'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.Source Error: Line 54: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'"
Line 55: 'myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments).GetEnumerator.Current, String)
Line 56: myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)
Line 57:
Line 58: filesTable.Rows.Add(myDataRow)Source File: D:YorZapdir_list_sort.aspx Line: 56 Stack Trace: [InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.]
ASP.dir_list_sort_aspx.BindFileDataToGrid(String strSortField) in D:YorZapdir_list_sort.aspx:56
ASP.dir_list_sort_aspx.Page_Load(Object sender, EventArgs e) in D:YorZapdir_list_sort.aspx:7
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +13
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +45
System.Web.UI.Control.OnLoad(EventArgs e) +80
System.Web.UI.Control.LoadRecursive() +49
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3743
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210 Please help me!
Dear all,
I am stuck with a SSIS package and I can€™t work out. Let me know what steps are the correct in order to solve this.
At first I have just a Flat File Source and then Script Component, nothing else.
Error:
[Script Component [516]] Error: System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to class type 'System.Data.SqlClient.SqlConnection'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)
Script Code (from Script Component):
' Microsoft SQL Server Integration Services user script component
' This is your new script component in Microsoft Visual Basic .NET
' ScriptMain is the entrypoint class for script components
Imports System
Imports System.Data.SqlClient
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Public Class ScriptMain
Inherits UserComponent
Dim nDTS As IDTSConnectionManager90
Dim sqlConnecta As SqlConnection
Dim sqlComm As SqlCommand
Dim sqlParam As SqlParameter
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Dim valorColumna As String
Dim valorColumna10 As Double
valorColumna = Row.Column9.Substring(1, 1)
If valorColumna = "N" Then
valorColumna10 = -1 * CDbl(Row.Column10 / 100)
Else
valorColumna10 = CDbl(Row.Column10 / 100)
End If
Me.Output0Buffer.PORCRETEN = CDbl(Row.Column11 / 100)
Me.Output0Buffer.IMPRETEN = CDbl(Row.Column12 / 100)
Me.Output0Buffer.EJERCICIO = CInt(Row.Column2)
Me.Output0Buffer.CODPROV = CInt(Row.Column7)
Me.Output0Buffer.MODALIDAD = CInt(Row.Column8)
Me.Output0Buffer.NIFPERC = CStr(Row.Column3)
Me.Output0Buffer.NIFREP = CStr(Row.Column4)
Me.Output0Buffer.NOMBRE = CStr(Row.Column6)
Me.Output0Buffer.EJERDEV = CDbl(Row.Column13)
With sqlComm
.Parameters("@Ejercicio").Value = CInt(Row.Column2)
.Parameters("@NIFPerc").Value = CStr(Row.Column3)
.Parameters("@NIFReP").Value = CStr(Row.Column4)
.Parameters("@Nombre").Value = CStr(Row.Column6)
.Parameters("@CodProv").Value = CInt(Row.Column7)
.Parameters("@Modalidad").Value = CInt(Row.Column8)
.Parameters("@ImpBase").Value = valorColumna10
.Parameters("@PorcReten").Value = CDbl(Row.Column11 / 100)
.Parameters("@ImpReten").Value = CDbl(Row.Column12 / 100)
.Parameters("@EjerDev").Value = CDbl(Row.Column13)
.ExecuteNonQuery()
End With
End Sub
Public Overrides Sub AcquireConnections(ByVal Transaction As Object)
Dim nDTS As IDTSConnectionManager90 = Me.Connections.TablaMODELO80
sqlConnecta = CType(nDTS.AcquireConnection(Nothing), SqlConnection)
End Sub
Public Overrides Sub PreExecute()
sqlComm = New SqlCommand("INSERT INTO hac_modelo180(Ejercicio,NIFPerc,NIFReP,Nombre,CodProv,Modalidad,ImpBase,PorcReten,ImpReten,EjerDev) " & _
"VALUES(@Ejercicio,@NIFPerc,@NIFReP,@Nombre,@CodProv,@Modalidad,@ImpBase,@PorcReten,@ImpReten,@EjerDev)", sqlConnecta)
sqlParam = New SqlParameter("@Ejercicio", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFPerc", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFReP", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Nombre", Data.SqlDbType.VarChar)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@CodProv", Data.SqlDbType.TinyInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Modalidad", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpBase", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@PorcReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@EjerDev", Data.SqlDbType.Decimal)
sqlComm.Parameters.Add(sqlParam)
End Sub
Public Sub New()
End Sub
Public Overrides Sub ReleaseConnections()
nDts.ReleaseConnection(sqlConnecta)
End Sub
Protected Overrides Sub Finalize()
MyBase.Finalize()
End Sub
End Class
Thanks a lot for your help
I get the following message in the vs2005 querybuilder when i do a preview:
***********************************
SQL Execution Error.
Executed SQL statement: SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = @PARAM1)
Error Source: SQL Server Compact Edition ADO.NET Data Provider
Error Message: @PARAM1 : Unable to cast object of type 'System.Data.SqlTypes.SqlInt32 to type System.IConvertable'.
****************************************
The same querypreview works fine without the parameter:
SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = 186)
Can anybody tell me why this is?
And tell me a way to get the tableadapter working?
Anne-Jan Tuinstra
Hi,This is driving me nuts, I have a table that stores notes regarding anoperation in an IMAGE data type field in MS SQL Server 2000.I can read and write no problem using Access using the StrConv function andI can Update the field correctly in T-SQL using:DECLARE @ptrval varbinary(16)SELECT @ptrval = TEXTPTR(BITS_data)FROM mytable_BINARY WHERE ID = 'RB215'WRITETEXT OPERATION_BINARY.BITS @ptrval 'My notes for this operation'However, I just can not seem to be able to convert back to text theinformation once it is stored using T-SQL.My selects keep returning bin data.How to do this! Thanks for your help.SD
View 1 Replies View RelatedWhen I execute the below stored procedure I get the error that "Arithmetic overflow error converting expression to data type int".
USE [FileSharing]
GO
/****** Object: StoredProcedure [dbo].[xlaAFSsp_reports] Script Date: 24.07.2015 17:04:10 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[Code] .....
Msg 8115, Level 16, State 2, Procedure xlaAFSsp_reports, Line 25
Arithmetic overflow error converting expression to data type int.
The statement has been terminated.
(1 row(s) affected)