I need to group up the records randomly into ānā number of batches. That can be done by NTILE, but I want group up similar records in single group.
Say for example, following is the list of records I have in my table which I want to group into 5 batches
A123 A124 A124 A123 A127
After Ntile I will get the below,
Desired output is, Need output like Ntile but all same id should reside in single batch
Even if I n=5, maximum possibility of batches are 3 only.
I'm using a SQL Server 2000 with a dozen of databases. The databases are rather small (all sizes together sum up to 10 GB).
The entire server gets extremelly slow from time to time (lasting a few days when it happens and suddently coming back to normality). A profiler trace doesn't show anything strange (besides a lot of SQL Agent entries).
I pretty much tried to isolate every single application that makes use of the databases in that server and see if it was the cause of the problem, but I couldn't find any correlation.
I know the computer where this server runs is quite fragmented. Is there anyway I could get to know if this is the cause of my performance issues?
I don't know if this happens, but once the server simply went down for some 3 hours, and I wasn't able to bring it up in anyway. It eventually started working again by itself. The only thing I did in the meantime was to run DBCC CHECKDB a few times, always getting the response "No error found on the database".
I have a SQL Server 2000 with a dozen of databases. The databases are rather small (all sum up to 10 GB).
The entire server gets extremelly slow from time to time (lasting a few days when it happens and suddently coming back to normality). A profiler trace doesn't show anything strange (besides a lot of SQL Agent entries).
I pretty much tried to isolate every single application that makes use of the databases in that server and see if it was the cause of the problem, but I couldn't find any correlation.
I know the computer where this server runs is quite fragmented. Is there any way I could make sure this is the cause of my performance issues?
I don't know if this might help, but once the server simply went down for some 3 hours, and I wasn't able to bring it up in any way. It eventually started working again by itself. The only thing I did in the meantime was to run DBCC CHECKDB a few times, always getting the response "No errors found on the database".
i have created a quiz software in VB. i have used ini files to fetch questions.. now i have thought of changing it to SQL.. i have created a table with questionno, question, option1,option2,option3,option4 and the correctanswer.. now i want to select the questions randomly each time the question session is started.. please help me out as i need to complete this project for my school...
I have a web app that calculates tax filing status and then stores data about the person.
Facts The insert is done through a stored procedure. All the sites that this program is being used are connecting through a VPN so this is not an external site. The duplicate records are coming from multiple sites (I am capturing there IP address). I am getting a duplicate about 3 or 4 times a day out of maybe 300 record inserts.
Any help would be greatly appreciated.
There are many sqlcmdInsert.Parameters("@item").Value =
hiiiiiiiiii plz help me........urgent my table is as follows CREATE TABLE [dbo].[tbl_photo_gallery]( [image_id_int] [int] IDENTITY(1,1) NOT NULL, [image_caption_vchr] [varchar](100) NULL, [image_path_vchr] [varchar](200) NOT NULL, [photo_cat_id_int] [int] NOT NULL, [posted_by_vchr] [varchar](45) NOT NULL, CONSTRAINT [PK_tbl_photo_gallary_1] PRIMARY KEY CLUSTERED ( [image_id_int] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]) ON [PRIMARY] now i wanna to get a randomly selected image_path_vchr(image path) from each photo_cat_id_int(category) i m doing this: select TOP (1) image_path_vchr from tbl_photo_gallery where photo_cat_id_int=1 ORDER BY NEWID() to get random image_path_vchr from category 1....only single category. but i wanna to use a simple query to get random image_path_vchr from each category without using any temporary table..... plzzzzzzzz help me out......... thanks in advance
I need to randomly order the selected rows from my table. Is this better to do on the Application level or in a stored procedure using "orderby NewID()"?
Which is faster? There will be about 100 rows returned with 10 columns.
Randomly getting "SQL Server does not exist or access denied" error from my server. All sites on my server lose connection to the MSSQL database on a windows 2005 server. Anyone know? There is truly no pattern, it just randomly loses access to the SQL server which is on the localhost. It's often different pages being browsed when it decides to crash. Sometimes it's a couple hours between crashes and sometimes just a few minutes. I've heard that I should check the log files, but I'm really not even sure what to check. Any suggestions appreciated. Traffic is really light on the server right now too.
Hi all, i am getting these type of errors in the managment tool where i try to look a stored p. or see the schema list or listing tables in a database.
THe errors looks like this one below but it does change in the InvalidArgument=Value of '***' *** area it gets numbers 448 1 5 or something else and after the error management studio doesnt work correctly, in the summory window nothing shows up, .
here is the detailed error message Please help.
See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text ************** System.ArgumentOutOfRangeException: InvalidArgument=Value of '448' is not valid for 'index'. Parameter name: index at System.Windows.Forms.ListView.ListViewItemCollection.get_Item(Int32 index) at System.Windows.Forms.ListView.set_VirtualListSize(Int32 value) at Microsoft.SqlServer.Management.UI.VSIntegration.AppIDPackage.RightPaneListViewer.set_VirtualListSize(Int32 value) at Microsoft.SqlServer.Management.UI.VSIntegration.AppIDPackage.RightPaneListViewer.PopulateView() at Microsoft.SqlServer.Management.UI.VSIntegration.AppIDPackage.RightPaneListViewer.Microsoft.SqlServer.Management.UI.VSIntegration.AppIDPackage.IReportView.SetReportSource(ReportSource reportSource) at Microsoft.SqlServer.Management.UI.VSIntegration.AppIDPackage.RightPaneControl.InternalSetReportSource(ReportSource reportSource, IReportView newView)
************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled.
When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
I have one table with 300,000 records and 30 columns.For example columns are ID, COMPANY, PhONE, NOTES ...ID - nvarchar lenth-9COMPANY - nvarchar lenth-30NOTES - nvarchar length-250Select * from databasewhere NOTES like '%something%'Is there a way to get results from this query in less then 1-2 secondand how?
Hi allI just ranUPDATE dbo.tbl_forecastedSET update_ref = 0but it only updated the first 10000 records. I'm wondering if anyone cantell me why this is, and can I get around it.I have looked on google and found a few references, but nothing in too muchdetailsthanks in advanceAndy
DECLARE @Date SET @Date = 2012 DECLARE @Year int SET @Year = (SELECT DATEPART(yyyy,@Date)) SELECT @Year AS Year --SELECT * -- FROM [Orders].[dbo].[Orders] od -- WHERE .Orderl_Date < @Date; ----WHERE DATEPART(yyyy,@Date)= @Year ----WHERE DATEPART(yyyy,od.Order_Date)= @ArchiveYear
Hi Friends, I have created the procedure in sql server 2005 for retriving email addresses from table based on date_expiry and concatinating all email addresses in to @tolist as shown below Declare @tolist varchar(8000) set @tolist = ''SELECT @tolist = @tolist + ';' + COALESCE(email, '') FROM awc_register WHERE DATEDIFF(day, date_expiry, GETDATE())='3'print @tolist set @tolist = substring(@tolist, 2, len(@tolist)) and I passed this @tolist to another procedure which should send mails for email addresses present in @tolist variable. Problem is I need to send the mail to each email address separatley.( not bulkly)
Using ASP.net 2.0 or Visual Web Developer Edition 2005 I could not find a single example with Datagrid Control or Form View Control, to achieve the basic functionality ofAdd/Edit/Delete Records with Remote SQL Server 2000 Database. When I searched for these examples I found many videos and examples using local database and in learning path of Visual web express editions, very goodexamples and videos using local SQL Server 2005 database, BUT not with the remote database. My question Is it possible to get the basic functionality of Add/Edit/Delete Records with Remote SQL Server 2000 Database using ASP.Net 2.0 Datagrid and FormView controls? This question looks like, a lazy developer question!! but, in my learning path I found GREAT videos in Visual Studio Web Developer Express edition and learned simple way of drag and drop the controls assign create local database and their connections, and few clicks to add/edit/delete records using datagrid and formview controls. In real life those are not much useful because many of web interfaces are with sql server 2000 and we need to convert them into ASP.Net. Similarly I wanted to drag and drop couple of controls and less coding etc. and accomplish basic functionality of add/edit/delete records using remote database sql server 2000. If possible please help me out. Wondering is it possible to get the functionality of add/edit/delete records using datagrid/formview with remote sql server 2000, the way they explained in bigginers learning videos ... I am referring to (http://msdn2.microsoft.com/en-us/express/aa700802.aspx) If possible and you think it is possible please guide me to that URL where I can learn the great functionalty n implement..!!
How can I copy a table from my sql server 2000 db to my sql server 2005 express edition? I have a project in VS.NET 2005 and I have a db in App_Data folder. However, when I look into that folder, there is nothing visible. I now need to copy a table from my existing sql server 2000 to my db located in my project's App_Data folder. Any help would be appreciated..
I have few tables. I want to identify the RECORDS for a table which has been created/modified for a particular date and time. I don't want to write a trigger to capture the event for add/update.
Is there any system table which track for date and time using stored procedure each individual records which has been last updated or newly created records??
Note : The application already created without lastModified date and each table... so, we don't want to modify the application or db.
DOC_NO // REV_NO // FILE_NAME ABC123 // A // abc123.pdf ABC123 // B // abc123_2.docx ABC124 // A // abc124.xlsx ABC124 // A // - ABC125 // A // abc125.docx ABC125 // C // abc125.jpg ABC125 // C // abc125.docx ABC125 // C // - ABC126 // 0 // - ABC127 // A1 // abc127.xlsx ABC127 // A1 // abc127.pdf
I'm looking to select all rows where the DOC_NO and REV_NO appear only once.(i.e. the combination of the two values together, not any distinct value in a column)
I have written the sub query to filter the correct results;
SELECT DOC_NO, REV_NO FROM [MYTABLE] GROUP BY DOC_NO, REV_NO HAVING COUNT(*) =1
I now need to strip out the records which have no file (represented as "-" in the FILE_NAME field) and select the other fields (same table - for example, lets just say "ADD1", "ADD2" and "ADD3")
I was looking to put together a query like;
SELECT DOC_NO, REV_NO, FILE_NAME, ADD1, ADD2, ADD3 FROM [MYTABLE] WHERE FILE_NAME NOT LIKE '-' AND DOC_NO IN (SELECT DOC_NO, REV_NO FROM [MYTABLE] GROUP BY DOC_NO, REV_NO HAVING COUNT(*) =1)
But of course, DOC_NO alone being in the subquery select is not sufficient, as (ABC125 /A) is a unique combination, but (ABC125 /C) is not, but these results would be pulled in.
I also cannot simply add an additional "AND" clause on its own to make sure the REV_NO value appears in the subquery, because it is highly repetitive and would have to specifically match the DOC_NO)
What is the easiest way of ensuring that I only pull in the records where both the DOC_NO and REV_NO (combination) are unique, or is there a better way of putting this select together altogether?
In one of our forth coming projects, with ASP.Net/C#/MSSQL Server, We have to deal with a Business table having about 15 millions of records. We want to know, that which methodologies should we adopt, both regarding front end and back end perspective, so the site could give optimised performance. Also in place of a Dedicated Server, the Hosting Company provides MSDE (that come with .net). Will this create any problem with this project, that have such a huge table? Should we go for some advanced database technique, such as, Clustering, Spliting Tables, etc.
Followings are the fields that the business table contains:
ID, Category ID (which comes from a Category table, each business is under a category), BusinessName, SignupDate, Address1, Address2, Phone Number, Hours Of Operation, Years in Business, LicenseNumber, DiscountCoupon, Website
Dear All I need to cerate a SP that SELECTS all the records from a table WHERE the first letter of each records starts with 'A' or 'B' or 'C' and so on. The letter is passed via a parameter from a aspx web page, I was wondering that someone can help me in the what TSQL to use I am not looking for a solution just a poin in the right direction. Can you help.
Suppose there's a table named [Category], which has 2 columns: CategoryID int, ParentCategoryID int
Each category, except the top most, has a parent category, it's a 1-to-n parent-children relationship. Now I want to write a stored proc./function that accepts a CategoryID input parameter, and output all the descendent CategoryIDs (son, grand son, ...). How to do that in MSSQL 2000?