I have a report which has subreport in it. the textbox5 has a countrows() function hooked and i want to
=sum(Subreport1.table1.textbox5.value), is it possible.
subreport control is pointing to childreport.rdl
childreport.rdl has - Table1 and textbox5
Thank you very much for the info.
I create, in a visual studio's project, a reportviewer (reportviewer1) that call un report of reporting services. Into this report there is a textbox("txtName").
I need read the textbox value of reportviewer1. It's possible?
Thanks
I want to read a value from a datasource and send it to a textbox on an ASP page from the page's attached VB file.
Both the textbox and datasource exist, but I don't know the proper commands to get the datasource value and then set the textbox value to it.
Dim Text As TextBox = FormView0.FindControl("Header")
Dim SQL As String = "Select [Customer] From [Datasource]"
Datasource.SelectCommand = SQL
Oh yeah, I don't want the textbox control to be databound as shown:
Text='<%# Eval("Customer") %>'
Hi everybodyI'm a newbie to SQL-Server 2005 so please excuse me for my silly questionsRecently i wrote a simple web-Page in which i select data from a table and then bind them to a GridView on the formevery thing was simple as follows:
SqlConnection Con = new SqlConnection("Data Source=.;Initial Catalog=Test;Integrated Security=True"); Con.Open();
SqlDataAdapter da = new SqlDataAdapter("SELECT [ID], [Name], [Date] FROM [Table1] ORDER BY [Date]", Con); DataSet ds = new DataSet(); da.Fill(ds,"MyTable");
GridView1.DataSource = ds.Tables["MyTable"]; GridView1.DataBind();
But I have a question , when i change the [Table1] to [table1] (With lowercase T) , i receive the following errormessage:
Invalid object name 'table1'.
why is that? could anyone help me? even i tried to test this issue in [Microsoft Management Studio] and i got thesame result . realy what's the reason? before and with sql server 2000 i didn't have these issue.
Thanks in advance.Regards.
For a table 'table1' in sqlserver 2000,
table1(col1) is clustred index 'Ix1' and table1(col1,col2,col3) is nonclustered index 'ix2'
is not tabel1(col1) 'ix1' a duplicate/redundant index ?
which index should be retained ?
or should both indexes remain on the OLTP table ?
Thanks a lot in advance.
I am trying to create a report with a sub report in Sql Server 2012 using Report Builder Version 3. I can run the subreport without any problems. I read where using a shared connection can cause this error so both the main report and the subreport use a connection that is embedded in my report.
For testing, I created the subreport without a parameter and added it to the main report. When I ran it that way, the report worked and sub report displayed the data. So I know it can read from the database.It seems to only give me this error when I am trying to tie the two reports together using a parameter.
Using SSRS 2014 and VS2013 rc5.
How do I hide a subreport if the parent report row containing the subreport is a certain value? I am attempting to create a statement with ageing buckets. In the main body of the report I have to display payments and invoices. If the invoice row is blank, I need to hide the row containing the subreport.
First, Is this even possible?
Second, How?
Hi,
I have a report which contains a subreport placed inside a list. when the subreport returns no data. it appears as a blank space in the main report. So i want to suppress the list when the subreport returns no data. Can somebody help me with this?
thanks
shri
Can we include a subreport which aslo has another subreport in a master report? (assuming all three reports have parameters too)
Thanks
I want to add up the values in a couple of text boxes in another textbox. How do I refer to the textboxes?
fields!textbox1.value doesn't work..what does?
Hi!
I dont know if i will explain this correctly, but my problem is with reporting service.
I'm supposed to Sum value in one textbox and than that sum use it in sum in other textbox.
Something like this:
Sum(Fields!Abc.Value/(Fields!dfg.Value+Sum(Fields!abc.Value)),"matrix1_RowGroup1")*100
I get error msg 'The Value expression for the textbox 'textbox49' contains an aggregate function (or RunningValue or RowNumber functions) in the argument to another aggregate function (or RunningValue). Aggregate functions cannot be nested inside other aggregate functions.'
Something like this wont work either Sum(Fields!abc.Value/ReportItems("textbox56").Value)*100
Error The Value expression for the textbox 'textbox55' uses an aggregate function on a report item. Aggregate functions can be used only on report items contained in page headers and footers.
So, pls help if you know how to reference textbox in other in body of report.
Thx.
Hi,
How do you express neither no in TSQL. I am trying to create a view that gathers work orders that are neither in one table nor in another
I tried the following few appraoches but feel there must be something better. thanks!
1.
Select *
FROM xyz
WHERE Status = Open
AND (Number
NOT IN (SELECT WONumber
FROM dbo.Table1)
OR Number
NOT IN (SELECT WONumber
FROM dbo.Table2))
2.
Select *
FROM xyz
WHERE Status = Open
AND Number
NOT IN (SELECT WONumber
FROM dbo.Table1)
UNION
Select *
FROM xyz
WHERE Status = Open
AND Number
NOT IN (SELECT WONumber
FROM dbo.Table2)
Is there anyway or a sql statement that can do something like, Select * from table1 where table1 not in table2.which means i get all the rows in table1, as long as they r not in table2
View 2 Replies View RelatedHi,
I have a problem I have two tables, table1 my main table and table2 my secondary table.
Table1 has lots of records with a field for a unique transaction number, table2 also has a field for a transaction number.
Table 2 only has a 10 entries in with the same transaction number of
10 of the entries in table1.
My question is how do I get all the records from table1 that DONT have a corrisponding transaction number in table2.
Thanks
Paul
Hi
I have table1 with tow columns ( col1 and col2)
table2 colums (col1 and col2)
Table1 -- col1--- col2
-----------A ---- dfg
-----------B ---- ght
Table2-- Col1--- col2
-----------A ----- jjk
-----------B ----- lkl
How do I update col2 of Table1 with the data from col2 of Table2 in a Single Query
i attached adventure works in sql server 2008 and it showing as read only ,make it read write or remove read only tag from database.
View 11 Replies View RelatedHey ya'll...
I need to create a query that I can run that will allow me to essentially take the first initial and last name and combine them from two columns in one table and update one column with that new data in another table. Example of need:
UPDATE tblLogin.UserName with (first character(tblEmployee.FName)+(tblEmployee.LName)) WHERE tblLogin.EmployeeID = tblEmployee.EmployeeID.
That was TOTALLY pseudo code and I know I'll need a join statement in there somewhere. Both tables reside on the same database, such as this:
dbEMPLOYEE (Database)--> tblLogin (Table)----> UserName (Column)--> tblEmployee (Table)----> FName (Column)----> LName (Column)
Any help would be GREATLY appreciated! Hopefully something soon - this was handed to me a few minutes ago and I have a few minutes to get it done.iSheahan
i have tow table same structure
how i can copy the data in table1 to table2
in T-SQL statment
thanx
Hi,
I'm using MSSQL and I have 2 tables with same structure. Can any one tell me the easiest way on how to select a row from table1 and insert it into table2.
Many thanks.
Dear all,
My question about SQL statement:
Table1 - Fields: T1PK, T1Field
Records:
1, ABC
2, DEF
3, GHI
Table2 - Fields: T2PK, FK (join T1PK), T2Field
Records:
101, 1, XXX
102, 1, YYY
103, 1, XXX
104, 2, XXX
I want to write a SQL statement that join Table1 and Table2 together, T2Field equal to XXX, and list all records from Table1.
That's the result columns: T1PK, T1Field, T2PK, T2Field
Result records:
1, ABC, 101, XXX
1, ABC, 103, XXX
2, DEF, 104, XXX
3, GHI, NULL, NULL
Is it possible? Please help!!
Joey
I have two tables with similar two columns as shown below
table1
code | organisation
256 | abc
832 | xyz
893 | tax
921 | abc
951 | abc
table2
code | organisation
951 | abc
832 | xyz
256 | abc
893 | tax
921 | tax
Now, I want to check whether all the codes in table1 existing in table2 and list them, and if both columns from table1 is matching with the both columns in table2. For e.g. 256|abc in table1 is matching with 256|abc in table2
The output should be :
921 | tax
For e.g. 256abc is there or not in table2,
I have a table table1
ID Date In Out
22 01/01/201410:00 11:00
22 02/01/201410:00 11:00
22 03/01/201410:00 11:00
23 01/01/201410:00 11:00
23 02/01/201410:00 11:00
23 03/01/201410:00 11:00
24 01/01/201410:00 11:00
24 02/01/201410:00 11:00
24 03/01/201410:00 11:00
25 01/01/201410:00 11:00
25 02/01/201410:00 11:00
25 03/01/201410:00 11:00
Table 2
ID Date In Out
22 01/01/201410:00 11:00
22 02/01/201410:00 11:00
22 03/01/201410:00 11:00
23 01/01/201410:00 11:00
23 02/01/201410:00 11:00
23 03/01/201410:00 11:00
24 01/01/201410:00 11:00
24 02/01/201410:00 11:00
24 03/01/201410:00 11:00
I want to insert only those record from table 1 to table 2 which is not there in table 2
HOW TO SELECT LAST ROW IN GROUP BY CLAUSE AND JOIN LAST ROW WITH ANOTHER TABLE IN ONE QUERY?
INPUT:
custidlivingstatusdate
1single2014-01-01 00:00:00.000
1married2014-01-02 00:00:00.000
1married_kids2014-01-03 00:00:00.000
2married_kids2014-01-04 00:00:00.000
2married2014-01-05 00:00:00.000
2single2014-01-06 00:00:00.000
Query 1 -- select last record
SELECT *
FROM
(SELECT ROW_NUMBER() OVER(PARTITION BY Custid ORDER BY Date DESC) AS Seq,*
FROM Living_Situation
)t
WHERE Seq=1
Output:
Seqcustidlivingstatusdate
11married_kids2014-01-03 00:00:00.000
12single2014-01-06 00:00:00.000
Table Customer:
custidsexesurname
1mjansen
2mpietersen
How to link Query 1 with table Customer in one query?:
Desired output in ONE query:
custidsexesurnamelivingstatus
1mjansen married_kids
2mpietersen single
How to identify whether the files are in read write or read only?
View 1 Replies View RelatedI'm trying to do Sharepoint DR with Log Shipping and every thing configured except one thing which is switch the WSS_Content (Standby /Read-Only) DB to be ready and Write.
I tried from
GUI or ALTER DATABASE [WSS_Content] SET
READ_WRITE WITH NO_WAIT
but I received the below error:
Database WSS_Content is in Warm Standby
I have two database files, one .mdf and one .ndf. The creator of these files has marked them readonly. I want to "attach" these files to a new database, but cannot do so because they are read-only. I get this message:
Server: Msg 3415, Level 16, State 2, Line 1
Database 'TestSprintLD2' is read-only or has read-only files and must be made writable before it can be upgraded.
What command(s) are needed to make these files read_write?
thanks
OBJECTIVE: I would like to read a text file from SQL Server 2000, read the text file content, and load its conntents in a RichTextBoxTHINGS I'VE DONE AND HAVE WORKING:1) I've successfully load a text file (ex: textFile.txt) in sql server database table column (with datatype Image) 2) I've also able to load the file using a Handler as below: using System;using System.Web;using System.Data.SqlClient;public class HandlerImage : IHttpHandler {string connectionString;public void ProcessRequest (HttpContext context) {connectionString = System.Configuration.ConfigurationManager.ConnectionStrings["NWS_ScheduleSQL2000"].ConnectionString;int ImageID = Convert.ToInt32(context.Request.QueryString["id"]);SqlConnection myConnection = new SqlConnection(connectionString);string Command = "SELECT [Image], Image_Type FROM Images WHERE Image_Id=@Image_Id";SqlCommand cmd = new SqlCommand(Command, myConnection);cmd.Parameters.Add("@Image_Id", System.Data.SqlDbType.Int).Value = ImageID;SqlDataReader dr;myConnection.Open(); cmd.Prepare(); dr = cmd.ExecuteReader();if (dr.Read()){ //WRITE IMAGE TO THE BROWSERcontext.Response.ContentType = dr["Image_Type"].ToString();context.Response.BinaryWrite((byte[])dr["Image"]);}myConnection.Close();}public bool IsReusable {get {return false;}}}'>'>
<a href='<%# "HandlerDocument.ashx?id=" + Eval("Doc_ID") %>'>File
</a>- Click on this link, I'll be able to download or view the file WHAT I WANT TO DO, BUT HAVE PROBLEM:- I would like to be able to read CONTENT of this file and load it in a string as belowStreamReader SR = new StreamReader()SR = File.Open("File.txt");String contentText = SR.Readline();txtBox.text = contentText;BUT THIS ONLY WORK FOR files in the server.I would like to be able to read FILE CONTENTS from SQL Server.PLEASE HELP. I really appreciate it.
I am afraid that just after @statusOfEmployee is retrieved from table1, but before table2 is updated, someone else (a second user) calls this same stored procedure and changes the @statusOfEmployee value. This would create an inconsistent update of table2 by first user, since the update of table2 'might' not have gone ahead if the latest value of @statusOF Employee was used. CAN SOMEONE PLEASE HELP ME WITH THIS SITUATION AND HOW I CAN BE SURE THAT ABOVE DOES NOT HAPPEN SINCE MULTIPLE USERS WILL BE HITTING THIS STORED PROCEDURE?
declare @status intbegin transet @status = (select statusOfEmployee from table1)if @@ERROR = 0 begin update table2 set destination = @destination /* @destination is an input parameter passed to the sp*/ where @currentStatus = @status if @ERROR = 0 commit tran else rollback tran endelse rollback tran
return
I'm trying to update a value into a table a sum. The two tables have ID values. These ID values appear once in Table1 and multiple times in Table2. I'm currently trying to sum up the values in Table2 where the IDs are equal to Table1 and then update the value:
UPDATE [Table1] SET
[Total] =
(SELECT SUM([Table2].[QTY]) FROM [Table2],
[Table1] WHERE [Table1].[ID] = [Table2].[ID]
GROUP BY [Table1].[ID])
FROM [Table1], [Table2] WHERE [Table1].[ID] = [Table2].[ID]
Hi guys,i have a little problem here.im attempting to write a stored procedure that compares two tables ofthe same data structure and adds (inserts) extra records that exist intable1 to table2.My problem is that i dont have a unique identifier between the tables.i think someone said that i needed to build up a keyany ideas greatly appreciated ??C
View 1 Replies View RelatedWe have an inventory table (Items) that contains item_no and qty_on_handfields.Another table (Item_Serial) contains serial numbers for any item that hasserial numbers.If an item has 10 qty_on_hand, it should have 10 records in Item_Serial, oneunique serial number for each item.I am trying to find items where the number of serial numbers does not equalthe qty_on_hand.Here is a query I'm trying to use and, of course, it does not work:select Items.item_no, Items.qty_on_handfrom Items inner join Item_Serial on Item_Serial.item_no = Items.item_nowhere Items.qty_on_hand <count(Item_Serial.item_no)Anybody know how to do this?Thanks.
View 4 Replies View RelatedHello,I have 2 tables, Table1 and Table2. I have copied all data from Table1to Table2.However Table1 is dynamic it has new rows added and some old rowsmodified everyday or every other day...How can I continue to keep Table2 up to date without always having tocopy everything from Table1?Basically from now on I would only like to copy new rows or modifiedrows in Table1 to Table2 and skip rows that are already present andhave not been modified in Table1. I would like to not do anything forany rows that were removed in Table1 and continue to keep a copy ofthem in Table2.Is using a DTS package the best way to automate this update of Table2to make sure Table2 is always up-to-date with Table1?Thanks for any help or advise :-)Yas
View 14 Replies View RelatedHi,I am getting errors in the following... Is it even possible to join onCONTAINS?SELECT ListA.ContentFROM ListA LEFT OUTER JOIN ListBON CONTAINS(ListB.Content, ListA.Content)WHERE ListB.Content IS NULLThanks!
View 4 Replies View Related