How To Reference The Primary Key Of A Newly Added Record In Trigger?
Jun 24, 2004
Please help me somebody solve my problem with my first :o trigger:
ALTER TRIGGER partner_update
ON dbo.partner
FOR UPDATE
AS
INSERT INTO partner (name) SELECT name FROM deleted
UPDATE invoice SET id_partner= *** WHERE id_partner = (SELECT id_partner FROM deleted)
*** - here I want to add a "reference" to the newly added record's automatically generated primary key (not to the updated!) Is it possible?
I'm hoping one of you will be able to help me because I haven't had very good luck finding any information on this.
I'm kind of new to SQL, but I'm learning as much as I can.
I created a web form that sends a new record to a SQL 2005 table I setup.
This all works exactly as it should, but I would like to have an email sent out every time a record is added to this table.
I have SQL Mail setup and I ran a test and it worked, but I can't seem to find any info on how to create a trigger that will send an email to me when a new record is added to the table.
My Database is called Engineering
The table is called ESSPartNumLog
And I have the following Columns that I would like to send in my email..
ESSSequence (PK,int, not null)
MaterialType (nvarchar(255, null)
ESSPrefix (nvarchar(255, null)
PartDescription (nvarchar(255, null)
Project (nvarchar(255, null)
PM (nvarchar(255, null)
Any ideas, or can you point me in the right direction?
Howdie y'all, I'm quit new to SQL server and I'm getting there finally, but it's quit hard to find some good info on how to create stored procedures... But I've got the following one.... CREATE PROCEDURE [dbo].[spAddUser]@UserEmail VARCHAR(255),@UserPassword VARCHAR(16),@UserName VARCHAR(32)ASINSERT INTO [dbo].[tblUsers](UserEmail, UserPassword, UserName)VALUES (@UserEmail, @UserPassword, @UserName)GO I actually would like to get value of the UserId column for the newly added record. Can anyone of you folks help me with this? Cheers, Wes
Can anyone tell me how an identity column decides what number to give which row.
I always thought that it was in order of the clustered index.
But i have found the following:
If you have Table A with a clustered index(not unique) say on the first 3 columns.
If the table is empty and you add an identity column, then afterward load it with data the value of the identity column seems to match the clustered index.
But if the table has no identity column and it is filled with data, and then you add an identity column the number for the identity column seems to be all over the place.
So basically how does a newly added identity column know what number to give each row, what if the clustered index is not unique? Is it random ?
I am trying to return the id of the newly added row after the insert statement in my stored procedure. I was told to "RETURN SCOPE_IDENTITY()", which i did. The problem is i do not know how to get this value in asp.net?
I added this code below in my business layer. myDAL refers to an object of my DAL layer. In my DAL layer, i have a addPara() method which will help me dynamically add as many parameters. Someone please advise me on what to do. Thanks
As -- INSERT the new record INSERT INTO MSTRPROM(PROMOTIONNAME, DISCOUNTRATE, PROMOSTARTDATE, PROMOENDDATE, PROMODESC) VALUES (@PROMOTIONNAME, @DISCOUNTRATE, @PROMOSTARTDATE, @PROMOENDDATE, @PROMODESC)
-- Now return the InventoryID of the newly inserted record RETURN SCOPE_IDENTITY() GO
Can anyone advise me as to how I can add the date and time to 2 columns in the sql server database for each record that is added. I'd prefer not to use the webform. Can sql server add the date automatically to the row? thanks
Greetings all, I am tring to capture the ID of a newly inserted record from a form to a label that I will reference in a reciept page. I intend to pass the rowid to retrieve record information on other pages. The insert suceeds... I just need to capture the auto generated ID for the new row to a label on the page post onclick. Any thoughts?
Dim MySQL As String = "Insert into dropkick (name, status, payroll, unit, contactnumber, email, equipment, issue, timein) values (@name, @status, @payroll, @unit, @contactnumber, @email, @equipment, @issue, @timein)"Dim myConn As SqlConnection = New SqlConnection(SqlDataSource1.ConnectionString) Dim Cmd As New SqlCommand(MySQL, myConn)Cmd.Parameters.Add(New SqlParameter("@payroll", txt_payroll.Text)) Cmd.Parameters.Add(New SqlParameter("@name", txt_name.Text))Cmd.Parameters.Add(New SqlParameter("@status", "W")) Cmd.Parameters.Add(New SqlParameter("@unit", txt_dept.Text))Cmd.Parameters.Add(New SqlParameter("@contactnumber", txt_cell.Text)) Cmd.Parameters.Add(New SqlParameter("@email", txt_email.Text))Cmd.Parameters.Add(New SqlParameter("@equipment", txt_equipment.Text)) Cmd.Parameters.Add(New SqlParameter("@issue", txt_issue.Text))Cmd.Parameters.Add(New SqlParameter("@timein", lbl_datetime.Text)) myConn.Open() Cmd.ExecuteNonQuery() Label1.Visible = "true" Page.DataBind() myConn.Close() Label1.Text = "Your data has been received!" ''LABEL TO BE POPULATED WITH ID OF NEW RECORD lbl_id.Text = ID
I am using SQL Express database and where can I set the default value to my Data field to auto insert the current date-time value? I tried to find the setting but can't seem to find it. Any help is much appriciated. Thanks in advance.
Hi! could you please check my code on adding record on my DB.. Im using SQL Server included on VWD.Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click Dim con As String = "Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Request.mdf;Integrated Security=True;User Instance=True" Dim sqlcon As New Data.SqlClient.SqlConnection(con) Dim sqlcmd As New Data.SqlClient.SqlCommand("Insert into uRequest (eticket, ename, edept, edetails, ejobpend, edate) values (@eticket,@ename,@edept,@edetails,@jobpend,@edate)") sqlcon.Open() sqlcmd.Parameters.Add("@eticket", Data.SqlDbType.Char, 10).Value = "11-0010-06" sqlcmd.Parameters.Add("@ename", Data.SqlDbType.Char, 100).Value = User.Identity.Name sqlcmd.Parameters.Add("@edept", Data.SqlDbType.Char, 50).Value = DropDownList1.Text sqlcmd.Parameters.Add("@edate", Data.SqlDbType.DateTime).Value = Date.Now sqlcmd.Parameters.Add("@edetails", Data.SqlDbType.Text).Value = TextBox1.Text sqlcmd.Parameters.Add("@ejobpend", Data.SqlDbType.Text).Value = TextBox2.Text sqlcon.Close() End Sub I've check the Data on my DB but nothing has been added. nwy, how can u create a confirmation message if the record has been successfully added.Thanks and sorry for the trouble.
I have an ssis package that moves data from a new csv file in a share location to sql server database table. However I need to get this agent job triggered whenever a new csv file gets added to the shared location.
What is a best strategy to do this keeping in mind that while package is running and two new csv files come in and package shd copy data from both the files.
I have a query that shows me a list of what employees that are on site assuming that employee badged in correctly. My problem is I need to know when an employee has two entries in a row that are "In" without have an "Out" entry.
For example, if John badges in at 8:00 Am and leaves without badging out, when he arrives the next day at 8:00 AM and badges in the system simply would show him as in with no record of him ever leaving correctly.
I am not sure how to return the correct result. Can I formulate a query that would display a Who's In list where the previous entry was NOT and Out?
I have a table that contains a Ref field and a TransactionDate field. For each Ref field there are mutliple Transactions. I am trying to put together a query that selects the Latest Transaction date for each Ref field in the table.
I tried:
SELECT * FROM tabMediaTransaction WHERE (TransactionDate = (SELECT MAX(TransactionDate) AS Expr1 FROM tabMediaTransaction AS tabMediaTransaction_1))
But this only returns 1 record for 1 Ref field. I need 1 record for each Ref field
Can anyone recommend a good reference book on views, stored procedures (system stored procedures as well) and triggers? I am in need of assistance in these areas.
Hi all, I have a ranking system where I wish to update the ranking every time a result is reported. Performance is no issue what-so-ever. More specifically, two players are to devide their points after each series of games to reflect the fraction of over-all games that each player have won. I've written the trigger below, but Visual Web Developer 2005 Express (SQL Server 2005 Express) complains about the references to the 'inserted'-table. I find it very difficult to transform the code below to something that looks like the examples found in documentation. Could someone get me started in the right direction? Thanks in advance, Anders create trigger result_insert on result after insert as begin declare @won1 as int declare @won2 as int declare @oldRank1 as float declare @oldRank2 as float declare @oldranksum as float
select @won1 = sum(wongames1) from result where player1 = inserted.player1 and player2=inserted.player2 select @won2 = sum(wongames2) from result where player1 = inserted.player1 and player2=inserted.player2
select @oldrank1 = Rank from RankingInfo where memberid = inserted.playerid1 select @oldrank2 = Rank from RankingInfo where memberid = inserted.playerid2
set @oldranksum = @oldrank1 + @oldrank2
update rankingInfo set Rank = @won1 / ( @won1+@won2) * @oldranksum where memberid = inserted.player1 update rankingInfo set Rank = @won2 / ( @won1+@won2) * @oldranksum where memberid = inserted.player2
In SQL Server 2000, I have a parent table with a cascade update to a child table. I want to add a record to the child table whenever I add a table to the parent table. Thanks
Every night we connect to a remote server using Linked Server and copy details from that database to a loading table, then load it into the 'real' table in our own environment. The remove database we load it from has indexes/primary keys that match the 'real', however the 'loading' table itself does not have any indexes or primary keys, both are SQL Server 2005 machines.
In the loading table we first of all truncate it then do a select insert statement from the remote server, then we then truncate the 'real' table and load iit from the 'loading' table.
The issue is when we attempted to load it into our 'real' table from our loading table there was a duplicate row, and our process failed with a Primary Key violation.
I checked the source with does have the same primary key's in, it did not contain a duplicate row and I checked the loading table and that did contain a duplicate row.
My question this is in what circumstances this could happen ?
hi, good day, i new in trigger and store procedure, can someone please suggest some advice and reference material in order to mastering trigger and store procedure ? thank you
Ok I know this might not be the most accurate place to post this but I know someone here has an answer for me on it.I need to get the product_ID of the new record that is created by this insert statement INSERTINTO products ( class_ID,category_ID,product_name,product_desc,product_image,product_dimension,product_o1,product_o2,product_o3,product_ac,product_ph,product_photo ) SELECT class_ID,category_ID,product_name,product_desc,product_image,product_dimension,product_o1,product_o2,product_o3,product_ac,product_ph,product_photo FROM productsWHERE product_ID = @productID
Hi I have a table in sql server with a numeric field as Primary Key. When i insert a new record i need that primary key increments automatic (like access auto increment) because i want avoid the possibility of duplicate Primary Keys. Is that possible? Thank you
I'm performing an insert on a table that has a relationship, but I also want to update the other table that has a foreign key relationship. How do I go about this? Thanks :)
Hi, Can someone please tell me the best practices for checking the primary key field before inserting a record into my database? As an example I have created an asp.net page using VB with an SQL server database. The web page will just insert two fields into a table (Name & Surname into the Names table). The primary key or the Names table is "Name". When I click the Submit button I would like to check to ensure there is not a duplicate primary key. If there is return a user friendly message i.e. A record already exisits, if there no duplicate, add the record. I guess I could use try, catch within the .APSX page or would a stored procedure be better? Thanks Brett
I have create a recursive triggers in tblIncident. The PKID is the primary key in tblIncident, in this trigger, i'm trying to generate an auto increament primary key from the stored procedure GetMaxId and update to tblINcident, but I face a problem where PKID does not refresh the latest PKID, it always show the default value 0, until I requery the table. How to get the latest PKID?
/* Trigger in tblIncident */ CREATE TRIGGER GetPKID ON tblIncident FOR INSERT AS DECLARE @PKID int DECLARE @NEWVALUE int DECLARE PKID_Cursor CURSOR FOR SELECT tblIncident.PKID FROM tblIncident, inserted where tblIncident.PKID = Inserted.PKID OPEN PKID_Cursor BEGIN FETCH NEXT FROM PKID_Cursor INTO @PKID
WHILE (@@fetch_status = 0) BEGIN SET @NEWVALUE = 0 /*Call stored procedure - getmaxid to get the latest PKID */ EXECUTE GetMaxId "IN", @NEWVALUE OUTPUT Update tblIncident SET PKID = @NEWVALUE WHERE PKID = @PKID
hii I have to insert some data into a table from the webpage. For that I need to know the last occurred value in the primary key and increment this by one and then insert the new record into the table. I am working with SQL Server 2005. I am coding in VB and ASP.NET 2.0. How will I go about this?? Is there some easy way for me to knw the last value of the primary key n then insert the record. It would be great if I get the idea more clear with the help of some code... Thanks
Can someone explain what happens when two users concurrently attempt tocreate a new record in a table with an autonumber primary key? For example,user 1 creates a new record and manipulates it within a transaction makinguse (perhaps) of the @@IDENTITY value when creating other, related records.Before this transaction is complete, user 2 creates a new record and doesthe same thing. Presumably they will both have the same @@IDENTITY? Ifthis is the case, how is it possible to manage such a situation?Thanks.
via VBScript, I am inserting data into one table as below: Code:
conn.Source = "INSERT INTO img (imageDesc,imageName,imageDate,imageUser,imageIP) VALUES ('"& ni &"','"& fn &"','"& Now() &"',"& Session("MM_UserID") &",'"& Request.ServerVariables("REMOTE_HOST") &"')"
In another table, I want to insert the primary key (imageID) of this newly inserted row into a new table called "t_image_Site" along with another value in another column.
Any advice/tutorials... this can be done with a trigger if I'm not mistaken?
I would like to get the primary key values in a DML CREATE TRIGGER as follows: CustomerID = 12 AND InvoiceID = 50 I create the DML trigger for UPDATE and DELETE only, how do I retrieve the values as above ? Jon Galloway provided a sample in http://weblogs.asp.net/jgalloway/archive/2008/01.aspx but the Primary Key Field and Primary Key Value were inserted into separate columns while I need to combine the Primary Key Field and Primary Key Value into 1 single field, using his example, I want to form the primary key as: ScoreId = 423 ScoreId = 3064 etc. Note that his example only show a single primary key in a table whereas I need to handle multiple primary keys in a table.
Hi All, I am using a trigger. I want to get the data of a row before updating inside this trigger and insert it into a backup table. Please anybody help me. Example with code is highly appreciated.
I'm using a Merge statement to update/insert values into a table. The Source is not a table, but the parameters from a Powershell script. I am not using the Primary Key to match on, but rather the Computer Name (FullComputerName).
I am looking on how-to return the Primary Key (ComputerPKID) of an updated record as "chained" scripts will require a Primary Key, new or used.As an aside: the code below does return the newly generated Primary Key of an Inserted record.
