Hello,
I'm using Entreprise Manager (for Sql Server 2000) to generate my
database's script. By mistake, i've changer FillFactor one time. And,
now I can't remove this data from generated sql script. How to remove
that ?
Thank's a lot.
last couple of months we're getting automatically generate jobs under sql server job event. causing occupy the resources.
in daily basis i've to remove mannualy. i've do disable the job no of times from properties, but it generates again.
how to remove it permanently. following are the job which generates automatically-
15559-cook.exe,
15564-dbdotas
15565-dbdotas2
15552-ftpbacks.exe
15554-install.exe
15555-kills.exe
15557-kugou2010
15558-macs.exe
15553-pdoors.exe
15561-regs.exe
15562-regsa.exe
I have 100.000 rows with 120 bytes each.
I want load 50.000 rows more.
How calculate the best fillfactor ?
Thanks you everybody.
Marc
Hello,
from what I gathered, if writes on table are more often than reads, then you should use a lower fillfactor - to reduce page splits (talking about clustered index here). But what if primary key = clustered index is incremental integer, and there NEVER is any insertion into middle/rename of rows, only appends, can I use 100% fill factor then?
thanks
I have a table with about 200 million rows of data. I add a couple million rows of data each week to the table in a single load process. The table is used for reporting purposes only and there are never (not intentionally at least) any updates or deletes to the table. The data is always being added to the "end" of the table with the new AsOfDate being the main factor in the clustered index.
My question is this: Since I'm not "inserting" rows that would split pages, should I have my FILLFACTOR for the table set to 100, or am I missing something? I obviously want to save physical hard drive space, but I also don't want to slow down the import process.
BTW, I'm using SQL2000
If you perform an Alter Index All without the FillFactor (example below) and the previous fill factor for the table and it's index were (80%), will the fillfactor be set to the previous value (80) or the sql server default index fill factor value (0 or 100%)?
ALTER INDEX ALL ON [Sales Header] REBUILD
WITH (SORT_IN_TEMPDB=ON, STATISTICS_NORECOMPUTE=OFF)
Thanks,
Ian
Hi all,
I tried to remove AdventureWorksDB in the "Add or Remove Programs" of Contol Panel and I got the following errors: (1) AdventureWorksDB Error 1326: Error getting file security: CProgram FilesMicrosoft SQL ServerMSSQL1MSSQLGetLastError: 5. |OK| and (2) Add or Remove Programs Fatal Error during installation (after I clicked the |OK| button). Please help and tell me how I can solve this problem.
Thanks in advance,
Scott Chang
I have uninstalled the CTP version of the SQL Server express so that I can install the released version but CTP version is still listed in the add/remove program list but without the change/remove button. I have been to different sites to find information on cleaning this up and I have ran all the uninstall tool I can find but the problem still prevails. I cannot install the released version without completely getting rid of the CTP version. Please help anyone.
Thanks
deebeez1
I need help,
I am having a hard time removing my SQL instance inside the Add/Remove program. After i select the SQL Instance name and then I tried to remove it but it won't allow me to delete it. There isn't any error message or whatsoever. Actually, when i try to log it in my SQL Management studio, that certain sql instance name is not existing according to the message box. Is there any way to remove the Sql Instance in my system?
I appreciate your help, Thanks
IS Support
Hello everybody,I was configuring a SqlDataSource control using SQL Authentication mode.I first added a database file (testdb.mdf) through Solution Explorer-Add New Items. Then through Database Explorer I created a table named "info"Then while configuring the SqlDataSource control I used the SQL Authentication mode and attached the "testdb.mdf" database file.Test Connection showed success. But when I hit the Ok button of the wizard it displayed the following error message:Failed to generate a user instance of SQL Server. Only an integrated connection can generate a user instance.While configuring the SqlDataSource control I clicked "New Connection". Under Data Source section I tried both Microsoft SQL Server and Microsoft SQL Server Database File. And in both the cases I attached a databese file(testdb.mdf). Plz enlighten me on this.Thanks and Regards,Sankar.
View 1 Replies View RelatedHi!
When MS published starter kits there were files .sql in App_Data. This files contained some sample data for a DB. How to create such files when I have database with data ?
Jarod
how generate an xml file from data in sqlserver2005
and read it in sql again
One of my first tasks on my current project was to generate all of the SQL scripts needed to rebuild the database. Of course, one of the catches was that everything needed to be separated out (table columns in different script from PKs different from FKs different from DEFAULTs, etc., etc.). And we wanted our own comment block inserted. So, I couldn't just use the Generate SQL Script from Enterprise Manager and be done with it. I was going to need to do some more work. Well, here's one of the scripts I wrote to build the FK scripts. Execute this script, then copy & paste the results into a new window. Break apart into separate .sql files as desired.
NOTE: Be sure to show results in Text (not grid) and change the display options in QA to return more than just 256 characters.
/***************************************************************************************************
Author: Mark Caldwell
Date: 11/15/2002
Descrip: Generate scipt commands to ADD FOREIGN KEY CONSTRAINTS for constraints already in DB.
NOTE: Be sure to set your Tools/Options/Results/Maximum Characters per column to a
large enough number (such as 2000) to display the entire command.
***************************************************************************************************/
SELECT
'----------------------------------------------------------------------------------------------------
-- ' + so2.name + ' to ' + so3.name + '
----------------------------------------------------------------------------------------------------
IF OBJECTPROPERTY(OBJECT_ID(N''' + so1.name + '''), ''IsForeignKey'') = 1 BEGIN
ALTER TABLE ' + so2.name + ' DROP CONSTRAINT ' + so1.name + '
PRINT '' -- DRP - ' + so1.name + '''
END
G' + 'O
ALTER TABLE ' + so2.name + '
ADD CONSTRAINT ' + so1.name + '
FOREIGN KEY (' + ISC1.COLUMN_NAME + ')
REFERENCES ' + so3.name + '(' + ISC2.COLUMN_NAME + ')
PRINT '' -- ADD - ' + so1.name + '''
G' + 'O
'
FROM sysforeignkeys sfk
JOIN sysobjects so1 on sfk.constid = so1.id
JOIN sysobjects so2 on sfk.fkeyid = so2.id
JOIN sysobjects so3 on sfk.rkeyid = so3.id
JOIN INFORMATION_SCHEMA.COLUMNS ISC1 on so2.name = ISC1.TABLE_NAME AND sfk.fkey = ISC1.ORDINAL_POSITION
JOIN INFORMATION_SCHEMA.COLUMNS ISC2 on so3.name = ISC2.TABLE_NAME AND sfk.rkey = ISC2.ORDINAL_POSITION
ORDER BY so2.name
Edited by - AjarnMark on 11/20/2002 02:46:11
The web site I am building is working fine locally, but I am hitting some problems with setting it up on a remote hosting server.First off, how can I generate the sql script to populate the SQL db on the remote server?I am using VS 2005 Standard. Do I need to d/l the SQL Server Express?Once I get that going, I should be able to figure out the rest...but I'll prolly have another question or two.Thanks
View 2 Replies View RelatedHello everyone.
i need to auto generate the user id in id colunm in my sqldatabase table.i want it to generate in this fashion.(mycompanyname-todaydate-number.)eg (ibm-15thfeb-1) (ibm-15thfeb-2) (ibm-16thfeb-1)here i need this user id to be automatically displayed in my web form when doing registration of new user,then only after clicking the savebutton i want all the data along with user id to be inserted into the table in sqldatabase.thanksjack.
Hi, I have a question, I have created a table and with a primary key called "ID". However, I want the "ID" be auto increment as well. when inserting new record into the database.I'm using vb.net. how can I do in the following format: "1", "2", "3", ............ etc. I've the code below but it's not working in the right way, what's wrong with my code?
Private Sub BtnAdd_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnAdd.Click
Dim ssql As String
Dim Itemid As Integer
Dim updcmd As SqlClient.SqlCommand
Itemid = 0
mysqladap = New SqlClient.SqlDataAdapter("select MAX(Item_id) From auction where item_type= '" & (Image1.ImageUrl) & "'", mySqlConn)
Itemid = (Itemid) + 1
ssql = "insert into auction (item_id,owner_name,owner_mail,owner_mobile,owner_phone,owner_ext,item_type,item_name,item_image,item_desc,item_cost,start_date) values ('" & (Itemid) & "','" & Trim(ownertxt.Text) & "' ,'" & Trim(emailtxt.Text) & "', '" & Trim(mobiletxt.Text) & "', '" & Trim(phonetxt.Text) & "','" & Trim(exttxt.Text) & "','" & Trim(DropDownList1.SelectedValue) & "','" & Trim(itemtxt.Text) & "','" & Trim(Image1.ImageUrl) & "','" & Trim(desctxt.Text) & "','" & Trim(costtxt.Text) & "','" & Trim(Today.Date) & "')"
updcmd = New SqlClient.SqlCommand(ssql, mySqlConn)
updcmd.ExecuteNonQuery()
lblmsg.Visible = True
End SubAnyone can help me? Thanks.
Are there any scripts available with anyone, for generating SQL scripts for all the objects in a server?
Thanks
I want to transfer some procedures using a generated script. However, the procedures that create pre-existing tables will not be created. Is there a way to shut off the validation so that I can create these procedures without getting errors?
Thanks for the help
Is there a way to write a dts package that will Generate SQL Scripts for a particular database? I am just learning dts and would like to automate this process that I run on weekly basis.
Thanks,
Steve
can I generate excel from stored procedure?
View 2 Replies View Relatedhi all,
how to generate txt file from sql table. I want text file with respective columns without any seperator between columns. and if for an example a column of int having 5 digits but i want it in text file with 10 digits with remaining all as blanks. guide me how to do this.
thnks in adv
This is my first time on sqlteam forum so a big hello to everyone!!
Firstly I am very noive user of sql to say the least, but i have be requested to create a .txt file
Its for a program that will read the txt file i create to produce a letter i.e I will be extracting, TITLE, FORENAME, SURNAME etc
MR
JOE
BLOGGS
Here is the my code so far, like i said i am a very novice user so try to help me and not condem me for my lack of knowledge!
SELECT
LPA_INPUT.INPUT_TITLE,
LPA_INPUT.INPUT_SURNAME,
LPA_HISTORY.LPA_AMT,
LPA_HISTORY.ELIG_RATE,
LPA_HISTORY.RATE_REBATE,
LPA_HISTORY.RR_AMT,
LPA_HISTORY.LPA_APPLIC,
LPA_HISTORY.LPA_AMT
FROM LPA_HISTORY, LPA_INPUT
WHERE LPA_HISTORY.CLAIM_NO = LPA_INPUT.CLAIM_NO
----------------------------------------------------
Iv been asked to have these eight fields looping over and over for all the records in the database, So im not to how to do that and how to generate it in a txt file?!
Keith
--This procedure will generate the Structure of a table
Create Procedure GenerateScript (
@tableName varchar(100))
as
If exists (Select * from Information_Schema.COLUMNS where Table_Name=@tableName)
Begin
declare @sql varchar(8000)
declare @table varchar(100)
declare @cols table (datatype varchar(50))
insert into @cols values('bit')
insert into @cols values('binary')
insert into @cols values('bigint')
insert into @cols values('int')
insert into @cols values('float')
insert into @cols values('datetime')
insert into @cols values('text')
insert into @cols values('image')
insert into @cols values('uniqueidentifier')
insert into @cols values('smalldatetime')
insert into @cols values('tinyint')
insert into @cols values('smallint')
insert into @cols values('sql_variant')
set @sql=''
Select @sql=@sql
+case when charindex('(',@sql,1)<=0 then '(' else '' end +Column_Name + ' ' +Data_Type +
case when Data_Type in (Select datatype from @cols) then '' else '(' end
+case when data_type in ('real','money','decimal','numeric') then cast(isnull(numeric_precision,'') as varchar)+
','+case when data_type in ('real','money','decimal','numeric') then cast(isnull(Numeric_Scale,'') as varchar)
end when data_type in ('char','nvarchar','varchar','nchar') then cast(isnull(Character_Maximum_Length,'') as varchar) else '' end
+case when Data_Type in (Select datatype from @cols)then '' else ')' end
+case when Is_Nullable='No' then ' Null,' else ' Not null,' end
from Information_Schema.COLUMNS where Table_Name=@tableName
select @table= 'Create table ' + table_Name from Information_Schema.COLUMNS where table_Name=@tableName
select @sql=@table + substring(@sql,1,len(@sql)-1) +' )'
select @sql as DDL
End
Else
Select 'The table '+@tableName + ' does not exist'
Madhivanan
Failing to plan is Planning to fail
i recently moved from sql server 7 to sql 2005 -- in sql 7 if i wanted to generate an sql script then It would generate a whole script ---
in sql 2005 - when i do generate it seems to attach a file --
I want to generate a script that I can then modify and use to create a new db -- is this possible?
Hi All!
I was thinking of creating a custom generated IDs for my table. I would like the ID to be something like "HR001" or "IT001", the two letter prefix would indicate the dept it belongs to. Initially I thought of having a table that will hold all the seed values for the IDs but I realize that this could have some concurrency problems if there will be a multiple number of users are creating a record at the same time. So now I have totally no idea on how to deal with the concurrency problem.
I will not be using this as a primary key because I already have the Identity field to be my primary key, though of course this field would definitely be unique. I will just be using this to display in the UI.
Any inputs would be greatly appreciated.
Thanks!
Hi,
Do someone know if there is a SP_ or XP_ function for help me create a script of create table? I can do it "on-line" by right click a table in Enterprise-Manager (all properties;generate sql-script), but I want to "call a command" to do this.
Very glad if someone know!
//Lotta
is there any easy way I can take a select statment
(such as select from payments where datetime>'20071122' and output a sql insert statment for these records?
I basically need to move a specific set of records from one sql server to another (both sql server 2005)
any suggestions for the best way to do this?
I need a sql query that generate sql script(.sql) of all the databases at once.
View 1 Replies View RelatedThe table in the database has a field called LabID. That field is aninteger and consists of the year plus a counter. For example, thefirst record of 2006 would be "20060001," the second record of 2006would be "20060002" and so on. I'm trying to create an Insert triggerthat can generate the ID value when a new record is inserted, but I'mnot quite sure how to implement that trigger. Can anyone help?
View 11 Replies View RelatedHello,I want to generate a SQL Script of a SQL Server database. To do this, Iright-click the database name and choose the option All Tasks/GenerateSQL Script.Than I get a text file with a script that generates all objects, but theorder in which the objects are generated is wrong. There are a lot ofviews in the database and many views are based on other views. When Itry to execute the script on a different computer, I get a lot of errormessages, because the script tries to create views that are based onother views that are not created yet.Is there a way to generate a script that automatically 'knows' whichviews to create first or do I have to manually look through all viewsand find out myself the execute order? (I hope not, because it arereally a lot of views).Greetings,Chris*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies View RelatedCan SQL Server generate an XML schema from a database?TIA,TimJowers
View 1 Replies View RelatedIs there an easy way to loop through every stored procedure in adatabase and create a file containing all of the SP code?lq
View 9 Replies View RelatedI have a table PCRel(ParentChildRelationship) with two columns PCRel(ParentId int,ChildId int)
I have to generate the value for the column ChildId based upon max(ChildId)+1 for a ParentId.
My requirement is to do it at table level since data is inserted into table from flatfiles also.
So I cannot put this logic in SProc but I have to put it at table level.
What is the best way to do this?
RajuIndia