Hi, all.
I have two server(Svr01, Svr02) that are replicated each other (Merge replication).
Svr01 must be Publisher distributor.. but, by mistake Svr02 is set to distributor, publisher. (Publisher/distributor are on the same comp..)
I want to fix this..
How?
I think I have to remove replication on both side and Reset from the first.
but, I don't know how to remove replication either..
Please reply with any thougt....
Hi All,
I had a HDD failure that caused the database to become SUSPECT. Thats ok we have backups to fall back on. Restoring the database failed because the database is used for repliacation, the database status was set to LOADING (in middle of restore). Because of this status I am unable to remove the repliaction to allow the database restore.
Whats a way to change the database status from loading? Or is there any way of removing it completely and starting again from a backup? Can I force repliaction to be removed?
Thanks for taking the time to look at my problem, all help and suggestions are much appreciated.
Cheers,
Dan
Hi all,
I try to remove a replication with from my MS SQL 2000
DECLARE @publication AS sysname
DECLARE @publicationDB AS sysname
SET @publication = N'MyDB_merge'
SET @publicationDB = N'MyDB'
-- Remove the merge publication.
USE [MyDB]
EXEC sp_dropmergepublication @publication = @publication;
-- Remove replication objects from the database.
USE master
EXEC sp_replicationdboption
@dbname = @publicationDB,
@optname = N'merge publish',
@value = N'false'
GO
but seems to do nothing, how many time cost this operation?
MSSQL search something ?
There is a solution for remove rapidly a replication from my database.
Thank's a lot bye
Bye
Hid
When i uninstall replication, it failed to remove completely. How do i remove them completely. so that make replication again
I would appriciate any help.
Thanks in advance
Yads
Version: SQL 2008 R2
Problem: I have a user who wants to remove table, but when she tries to remove it ( drop the table), she gets an error:
===========================================================
MSG 3724, Level 16, State 2, Line 6: Cannot drop the table, 'dbo.<table name>' because it is being used for replication.
MSG 2714, Level 16, State 6, Line 2
There is already an object named '<table name>' in the database.
============================================================
To investigate, I saw the following:
In the SSMS---> Replcation---> Local Publication--> [XYZ].Pub_XYZ
[SERVER Name].[XYZ_Replication]
Local Subscriptions:
[Reference DB].[ServerInstance].[Instance Name]:ABC.ABC_TO_XYZ.Reference DB).
How do I remove that table? Do I need to edit Replication? How? Which one?
I want to remove article from my Transactional replication, can I just simply uncheck it from GUI, or it requires anything else.
View 3 Replies View RelatedGood day,
Currently, i'm using SQL 2000 & having a replication database from district to HQ. Then, I need to remove a reference key from one of replicate table.
So, what I need to do & how to remove reference key? I wish someone here can help me out..
Beside, any impact might happen if remove reference key?
Hi I have a problem. I have a replicated database. Now I have a couple of tables within the database where I delete the content row by row and caluted the new record and insert them. Now when I do this on the development system that is unreplicate it is fine. However on production that is replicated I get this error:
System.Web.HttpUnhandledException: Exception of type System.Web.HttpUnhandledException was thrown. ---> System.Data.SqlClient.SqlException: INSERT statement conflicted with COLUMN FOREIGN KEY constraint 'FK_VARLISTS_USERVARLISTS'. The conflict occurred in database 'BHP', table 'USERVARLISTS', column 'AutoID'.
INSERT statement conflicted with COLUMN FOREIGN KEY constraint 'FK_VARLISTS_USERVARLISTS'. The conflict occurred in database 'BHP', table 'USERVARLISTS', column 'AutoID'.
INSERT statement conflicted with COLUMN FOREIGN KEY constraint 'FK_VARLISTS_USERVARLISTS'. The conflict occurred in database 'BHP', table 'USERVARLISTS', column 'AutoID'.
Now I persume this is caused by the foreign key being contrained by the replicated database. I had though about unticking the box 'Enforce Relationship for replication' but I am not sure what problems this may cause.
Woudl this fix my problem? If not do you have any idea what would.
Thanks Ed
One of our users tried to set replication solution in a sqlserver (the idea was given up).
SQL Server added in each table a column related to replication.
We want to remove theses columns and I used the following script :
select 'ALTER TABLE dbo.'+object_name(id)+' DROP CONSTRAINT '+object_name(constid)+' GO'
+'ALTER TABLE dbo.'+object_name(id)+' DROP COLUMN '+'msrepl_tran_version GO'
from sysconstraints where object_name(constid) like '%msrep%'
Question:
1. I want to know how to introduce a carraige return in order to have some thing like this :
...
ALTER TABLE dbo.T_CommandCopyFile
DROP CONSTRAINT DF__T_Command__msrep__44AB0736
GO
ALTER TABLE dbo.T_CommandCopyFile
DROP COLUMN msrepl_tran_version
...
2. Is there any other solution to do this more simply ?
Environment:-
Windows 2012 R2,
SQL 2012 (Primary Replica)
SQL 2012 (Seondary Replica)
SQL 2012 (Secondary Replica over WAN site)
There are database replicating on three SQL servers. WAN line is having performance issue because of limited bandwidth I have to remove SQL secondary replica over WAN site temporarily and add it again later when the WAN line is upgraded with between bandwidth What is the best practice to remove secondary replica and replicating database and add later from SQL management studio without interruptions on databases?
Hi all,
After I setup the merge replication in SQL SERVER 7.0, there is a rowguid column (datatype uniqueidentifier) inserted into each table in the both the source and destination database.
I need to get rid of the rowguid column in all tables. I deleted the replication, but the column still existed.
Is there an easy way to get rid of all the rowguid column in the database? Thanks for your reponse in advanced.
Hi everybody,
We are using SQl-2000 Sp2 clustured on two compaq servers
We have to modify our database shema every month.
We are using sp_repladdcolum and sp_repldropcolum to
modify table without snapshot.
Owever I would like to add/delete entire table in shema
database without using snapshot ?
Is it possible ?
How to do ?
Thanks.
Fabio
Hi all,
I'm a rather newbie, not only to this forum but also to sql server having a question to the following issue:
Is it possible to drop/remove/delete the "orphan" of a merge subscription on one instance of sql server without having the (former) distributor/publisher (on other instance) available?
The background is: I had a small replication infrastructure with two instances (on two machines), one the publisher and distributor, the other the subscriber. Now it happened that the publisher/distributor machine was completely set up new without having the replication dropped in advance, what remained on the subscriber is now a database with all the merge/replication tables and the guid columns in the user tables.
Moreover this, an entry remained in the subscription saying that a subscription with the former publisher exists...
Can I remove these "orphans" without having to setup the instance again?
Thank you,
Andy
We are runnning on SQL Server 2012 SP1 + CU9.
I have found some articles with no publication in our transactional replication.
For example, running this:
select p.publication,
a.publication_id,
a.article
from dbo.MSArticles as a
left outer join dbo.MSpublications as p
on a.publication_id = p.publication_id
shows this:
NULL1org_Community
NULL3org_Community
Purchasing to EDW5org_Community
NULL1org_Division
NULL3org_Division
Purchasing to EDW5org_Division
How can I get rid of the articles that are not part of a publication?
I can't use sp_droparticle because it requires a publication which these articles do not have.
Hi all,
I tried to remove AdventureWorksDB in the "Add or Remove Programs" of Contol Panel and I got the following errors: (1) AdventureWorksDB Error 1326: Error getting file security: CProgram FilesMicrosoft SQL ServerMSSQL1MSSQLGetLastError: 5. |OK| and (2) Add or Remove Programs Fatal Error during installation (after I clicked the |OK| button). Please help and tell me how I can solve this problem.
Thanks in advance,
Scott Chang
I have uninstalled the CTP version of the SQL Server express so that I can install the released version but CTP version is still listed in the add/remove program list but without the change/remove button. I have been to different sites to find information on cleaning this up and I have ran all the uninstall tool I can find but the problem still prevails. I cannot install the released version without completely getting rid of the CTP version. Please help anyone.
Thanks
deebeez1
I need help,
I am having a hard time removing my SQL instance inside the Add/Remove program. After i select the SQL Instance name and then I tried to remove it but it won't allow me to delete it. There isn't any error message or whatsoever. Actually, when i try to log it in my SQL Management studio, that certain sql instance name is not existing according to the message box. Is there any way to remove the Sql Instance in my system?
I appreciate your help, Thanks
IS Support
I'm getting this, after upgrading from 2000 to 2005.Replication-Replication Distribution Subsystem: agent (null) failed.The subscription to publication '(null)' has expired or does notexist.The only suggestions I've seen are to dump all subscriptions. Sincewe have several dozen publications to several servers, is there adecent way to script it all out, if that's the only suggestion?Thanks in advance.
View 3 Replies View RelatedHi,I have transactional replication set up on on of our MS SQL 2000 (SP4)Std Edition database serverBecause of an unfortunate scenario, I had to restore one of thepublication databases. I scripted the replication module and droppedthe publication first. Then did a full restore.When I try to set up the replication thru the script, it created thepublication with the following error messageServer: Msg 2714, Level 16, State 5, Procedure SYNC_FCR ToGPRPTS_GL00100, Line 1There is already an object named 'SYNC_FCR To GPRPTS_GL00100' in thedatabase.It seems the previous replication has set up these system viewsSYNC_FCR To GPRPTS_GL00100. And I have tried dropping the replicationmodule again to see if it drops the views but it didn't.The replication fails with some wired error & complains about thisviews when I try to run the synch..I even tried running the sp_removedbreplication to drop thereplication module, but the views do not seem to disappear.My question is how do I remove these system views or how do I make thereplication work without using these views or create new views.. Whyis this creating those system views in the first place?I would appreciate if anyone can help me fix this issue. Please feelfree to let me know if any additional information or scripts needed.Thanks in advance..Regards,Aravin Rajendra.
View 2 Replies View RelatedHi,
In my production box is running on SQL7.0 with Merge replication and i want add one more table and i want add one more column existing replication table. Any body guide me how to add .This is very urgent
Regards
Don
Hello,
I have this problem on a Production database.
DBCC OPENTRAN shows "REPLICATION" on a server that is not configured for replication. The transaction log is almost as large as the database (40GB) with a Simple recovery model. I would like to find out how the log can be truncated in such a situation.
Thank you.
Hello,I'm getting the following error message when I try add a row using aStored Procedure."The identity range managed by replication is full and must be updatedby a replication agent".I read up on the subject and have tried the following solutionsaccording to MSDN without any luck.(http://support.Microsoft.com/kb/304706 )sp_adjustpublisheridentityrange (http://msdn2.microsoft.com/en-us/library/aa239401(SQL.80).aspx ) has no effectFor Testing:I've reloaded everything from scratch, created the pulications from byrunning the sql scripts generated,created replication snapshots andstarted the agents.I've checked the current Identity values in the Agent Table:DBCC CHECKIDENT ('Agent', NORESEED)Checking identity information: current identity value '18606', currentcolumn value '18606'.I check the Table to make sure there will be no conflicts with theprimary key:SELECT AgentID FROM Agent ORDER BY AgentID DESC18603 is the largest AgentID in the table.Using the Table Article Properties in the Publications PropertiesDialog, I can see values of:Range Size at Publisher: 100,000Range Size at Subscribers: 100New range @ percentage: 80In my mind this means that the Publisher will assign a new range whenthe Current Indentity value goes over 80,000?The Identity range for this table cannot be exhausted! I'm not surewhat to try next.Please! any insight will be of great help!Regards,Bm
View 1 Replies View RelatedWhat is the main difference between snapshot and transactional and merge replication?
View 5 Replies View RelatedHi,
I have a VB.net app that access a SQL Express database. I have transactional repliaction set up on a SQL 2000 database (the publisher) and a pull subscription from the VB.net app. I use RMO in the VB app to connect to the publisher. My problem is I am getting some strange behaviour as follows
- if I run the app and invoke the pull subscription it works fine. If I then close my app and go back in, I can access my data without any problem
- If I run the app and try to access data in my SQL Express database it works fine. I can then close the app, reopen it and run the pull subscription it works fine
however.......
- if I run the app, invoke the pull subscription (which runs fine), and then try to access data in my local SQL Express database without firstly closing and reopening the app, I get a login error
- if I run the app, try to access data in my local SQL Express database (which works fine), and then try to run the pull subscription I get a "the process cannot acces the file as it is being used by another process" error. In this case I need to restart the SQL Express service to be able to run replication again.
I get exactly the same behaviour when I use the Windows Sync tool (with my app open at the same time) instead of my RMO code to replicate the data.
I am using standard ADO.Net 2 code to access my SQL Express data in the app and closing all connections etc
Any advice appreciated !
Thanks
Ronan
Hi all,
I have recently setup a transactional replication in MS SQL 2000. After setting up the replication the clients TempDB grew by almost 60GB. Now the client is Blaming me for the TempDB GROWTH and saying that its because of the replication being setup i tried to convince them but they are not satisfied yet. Can anybody please tell me does replication cause the tempdb to grow. If yes then how. can u suggest any good link for getting to know the internal working of SQL Server replication????
Thanks in advance
Jacx
Hi all,
I know that adding a column using ALTER TABLE to add a column automatically allows SQLSERVER 2005 to replicate the schema changes to the subscribers, however, I would like to add a new column to an existing article that is being used for merge replication, however, I don't want this column to be replicated. Re-initialising the subscriptions is not a option. Help would be appreciated.
I am using SQLSERVER 2005 (SP1).
I have been researching on the proper steps or sequence to follow to completely remove SQL Server 2012 Transactional Replication. I have read articles about using SSMS as well as using replication stored procedures and some procedures use SQLCMD or just regular TSQL executed in SSMS. I have also read articles where people said all you really need is connect to the Publisher instance, find the publication you want to remove and choose "Delete" and everything will be taken care of behind the scene. I have three SQL servers that participate in transactional replication. SQL-P (publisher),
SQL-D (distributor) and SQL-S (subscriber). Do I need to connect to the distributor instance and the subscriber instance when removing transactional replication or is it just really connecting to the publisher and click delete on the publication? I want everything gone including any metadata, systems tables, distributions db and any other replication objects created during the initial configuration.
In one of the column which i import , all records have the
This means the enter button on that line... how to replace or remove
Eg ::
Month @ 7:30 p.m. Location: ass nue Westmont
Hi all
In my table one of the column consists the values like this
Krishna"
Rama"
- - - - -
I want to remove ". I started with instr to findout the occurence. Its giving the message that
'InStr' is not a recognized built-in function name.. How to solve it.
Waiting for valuable replies
Thank u
Baba
Please help to remove (-)
The EM_TERMINATION_DATE column have records with no data.
I am using the following below script to format the dates.
The problem is : the format with (-) between yyyy-mm-dd retrive NULL records with (-) see the output. How to fix it?
Here is my ouput:
EM_TERMINATION_DATE
2006-03-15
- -
- -
- -
- -
Here is my script:
select
cast(left(EM_TERMINATION_DATE, 4) as varchar(4))
+ '-' +
Cast(right(EM_TERMINATION_DATE, 4) as varchar(2))
+ '-' +
Cast(left(Right(EM_TERMINATION_DATE,2), 2) as varchar(2))as TERM_DT
FROM EMF
Hi,
I don't need sql express, never use it and I would like to remove it. Is it possible without loosing important functionalities in VWD? Is that true that cannot compile the applications (ctrl+f5) anymore?
I had sqlcachedependancy installed. But now I cannot uninstall it?
1. I unregistered:
C:WINDOWSMicrosoft.NETFrameworkv2.0.50727>aspnet_regsql.exe -E -S localhost-d DNN1 -dd
2. I remove the Dependencry.Start() from my application_start
' System.Data.SqlClient.SqlDependency.Start(ConfigurationManager.ConnectionStrings("SiteSqlServer").ConnectionString)
3. I removed the cache section from my web.config
4. I removed the outputcache statements from my aspx pages.
<!--<%@ OutputCache Duration="1" VaryByParam="*" SqlDependency="CommandNotification" %>-->
However, I still get the next error:
File
Error
When using SqlDependency without providing an options value, SqlDependency.Start() must be called prior to execution of a command added to the SqlDependency instance.
What to do?
Any help or advice is appreciated.
Jelle
Would someone mind helping me with formatting a string please??
I have a column DECIMAL(4,2). In a stored proc I am selecting this field and converting it to varchar so I can append certain characters to it (this is really irrelevant to my question). However, before appending the characters, I need to remove zeros after the decimal point.
Examples:
3.00 should be 3
3.20 should be 3.2
3.05 should be 3.05
etc