How To Retrieve Data From Within Collapsed Matrix
May 7, 2008
Hello,
I have a matrix which lets you drill-down by company divisions and then branches within those divisions, and the data columns show how many employees are required for each divisionranch, and how many they actually have. For example, Division 1 might have 9 / 9 for Actual / Required, but when you drill it down to Branches A and B, they may have 5 / 4 and 4 / 5 respectively. Therefore Branch A has surplus employees and Branch B has a shortfall, but at the Divisional level it looks like there are the correct number of employees.
Naturaly my customer is a bit concerned that this could be misleading data. Is there any way that I can check at the Divisional level (i.e. collapsed) whether a Branch at the expanded level has a surplus or shortage of employees? I'm not sure whether this could be resolved by redesigning the report or if it's even possible. Any ideas would be great!
Regards,
Peter Marshall
View 3 Replies
ADVERTISEMENT
Feb 3, 2004
I have a table defined as (int Row, int Column, money Data); as it were a matrix.
Which is the more efficient way of retrieving a result set with the following form?
Column1 Column2 Column3
---------- ----------- ----------
Data11 Data12 Data13
Data21 Data22 Data23
Data31 Data32 Data33
... ... ...
Thanks a lot in advance.
View 1 Replies
View Related
Dec 13, 2007
Does anyone know if the following scenario is possible in SSRS 2005?
I have a dataset as:
Year EndofYearValue
2007 55
2008 28
2009 33
2010 65
My aim is to have a Matrix as:
2007 2008 2009 2010
Value at Start of Year 55 28 33
Value at End of Year 55 28 33 65
I have built my matrix with a group on columns for Year and the rows have a static group
The end of year value is easy to show but how do I refer to a dataset value for the previous group value?
This sounds so simple, I must be missing something obvious! I was hoping the previous() function was the answer but this is not supported in a matrix?
Can anyone point me in the right direction?
View 2 Replies
View Related
Nov 2, 2006
Hello
Im searching for a solution to set all matrix row or cell the same height.
it schoud looks like this example:
This is a simple matrix
test a
text b
text c
text d
text e
text f
text g
This is a matrix with all the same row-height.
test a
text b
.
text c
.
.
text d
text e
text f
text g
.
.
Thx you a lot
View 3 Replies
View Related
Sep 13, 2007
Hello,
In the report I€™m making I set the visibility property of the textboxes comprising a row to be toggled on by an item in the group header. I set the initial visibility to hidden, and initial appearance to collapsed. Now this worked fine, I get group headers with the sum of the records, that I can expand by clicking +.
The problem is that even though the collapsed rows are empty and the lines separating them from each other are invisible, they still take up space so the other group header (when collapsed) starts not right away, but after a space which is equal to the sum of the height of all the hidden rows.
All I managed to do is set the row property to €œcan shrink to accommodate contents€? and set the row height to 0.07937cm this helps but if the group contains 50-100 records the space between headers is quite big.
I do not know why, but I can€™t set the row height to 0.0cm. This problem also bothers me when I hide duplicates in group and the empty row is still visible in the report. It takes up space and the people using the report are complaining for the unnecessary lines that hinder reading.
Could anyone help me with this one?
Regards
Darius
View 3 Replies
View Related
Jul 12, 2007
I have created a matrix where I have booleans on the rows and columns. They are initially in the collapsed state. For reporting purposes, I would like the initial state to to be expanded or at list a quick fix to quickly convert the collapsed booleans to expanded booleans.
I have navigated to the Layout tab and right-clicked the fields that are tied to the boolean and then clicked on the properties. This bring sup the Textbox Properties. From here, I click on the Visibility tab. At the bottom of the textbox is a section "Initial appearance of the toggle image for this report item:". The default choice is marked as collapsed (+). One would logically think that you you would have to do then is select the expanded (-). choice. Well, when I do this, all it simply does is chance the icon from a '+' to a '-' and the fields are still shown as collapsed.
Any ideas on what I need to do?
View 7 Replies
View Related
Jan 8, 2008
Is there a way to have the Report Manager show the header/toolbar in the collapsed state instead of full screen by default? (i.e. the top of the report starts with "New Subscription" instead of "SQL Server Reporting Services")
These are Report Server reports, and I need to show several reports in one view (I'm using T-dog ibrowse to do this in a Powerpoint slide show). It looks cluttered to have the headers show repeatedly.
View 7 Replies
View Related
Apr 15, 2008
Hi.
I found unpleasant issue within RS:
1. Imagine RS report with Table(with interactive sorting) whose visibility is toggled by Textbox:
2. After sorting the Table the Textbox is getting collapsed making the Table invisible. But the Table should remain visible.
Is this MS bug? Are there workarounds?
If my question is not understandable I can send simple *.rdl report with sample.
Thank you in advance for help.
View 7 Replies
View Related
May 2, 2007
Hello everyone here!
I am developing a report which uses the collapse and expand functionality. But the functionality indicates that all the records when rendered in Excel must all be expanded, and collapse button must not be visible once exported.
But I have noticed that when the report is processed, the first row that is grouped was collapsed, but the other records below we're all expanded.
I just can't seem to detect the error for this, because the rendering we're all fine with the HTML version and PDF version, and another thing it is always on the first row that the records were collapsed.
Any idea regarding this scenario? Any help will be highly appreciated. Is this an issue of the Service Pack used for the Reporting Services? Or it is really an Excel issue?
regards,
Mark Guerra
narraSoft Philippines
Software Engineer
View 3 Replies
View Related
Jan 12, 2007
Hi, please I would like to use something like this>
=IIF(table1_group2 is Collapsed,True,False)
I want to generated some event based on actual state of e.g. report group. if user expand group make this event otherwise (group is collapsed) make another event.
Thanks for your advice.
View 2 Replies
View Related
May 15, 2007
I have a report that (for purposes of this example) displays States and the Cities in a state.
Now the State is the first group which I want to drill down into by expanding and then show the Cities as the detail line.
What I would expect to happen (and what does happen if I use the wizard instead of creating the report manually) is that I would click on a State and then the page would expand to make room for all the cities listed below.
(That is to say if I am showing only states, not expanded, then all 50 states fit on a single page. Then if I expand California all the states below that shift onto other pages to make room for the 400+ cities in California)
However, what happens is that when I preview the report instead of being 1 page long it is many pages in length with empty white space between the States (white space that would be occupied by the cities if I were to expand the state).
Can someone tell me what setting I need to adjust to get the report to dynamically resize when I expand/collapse groups?
Thank you.
View 1 Replies
View Related
Apr 11, 2007
I'm trying to figure this out
I have a store procedure that return the userId if a user exists in my table, return 0 otherwise
------------------------------------------------------------------------
Create Procedure spUpdatePasswordByUserId
@userName varchar(20),
@password varchar(20)
AS
Begin
Declare @userId int
Select @userId = (Select userId from userInfo Where userName = @userName and password = @password)
if (@userId > 0)
return @userId
else
return 0
------------------------------------------------------------------
I create a function called UpdatePasswordByUserId in my dataset with the above stored procedure that returns a scalar value. When I preview the data from the table adapter in my dataset, it spits out the right value.
But when I call this UpdatepasswordByUserId from an asp.net page, it returns null/blank/0
passport.UserInfoTableAdapters oUserInfo = new UserInfoTableAdapters();
Response.Write("userId: " + oUserInfo.UpdatePasswordByUserId(txtUserName.text, txtPassword.text) );
Do you guys have any idea why?
View 6 Replies
View Related
May 8, 2008
Good day., please help me,in a formview control, i set it in Insert Mode, so it should display info from table 1 but when i click on the insert button, it will insert it in table 2.btw, table 1 and table 2 are in the same database?? how about if they are not in the same database?how?please help me,Thanks.,SALAMAT PO.,
View 3 Replies
View Related
Oct 24, 2007
Hey All,
I am developing a data acquistion system which monitors the amount of energy that a user consumes in different parts of a house and displays the information in real time on their computer screen. I am collecting the data through tranducers attached to the circuit breakers in the breaker box and sending the data to analog-to-digital converter channels in a MCU. I am retrieving the data from the serial port and storing it to a text file. Each line of data in the text file represents three fields which are separated by commas. I will be reading data from multiple data collection boxes so the first field is the unit number, the second fied represents the analog-to-digital converter channel number from each unit, and the third field is the data that is collected from the ATD channel. I am trying to use SSE to retrieve the data from the text file, and parse each line of data into individual columns in a databse. Then I want to be able to extract the data associated with a particular ATD channel number from the databse and display it in the appropriate text field on a windows form.
I've got the MCU programmed. I have no problem collecting the data from the serial port, and I can do the visual basic programming okay. I have absolutely no clue how to read the data into the database, continuosly read new values into the databse, and then access the stored data to update the text fields on the form. Please help if you can, I've been working on this specific problem for a couple of weeks and I'm not making any progress. Thanks.
View 3 Replies
View Related
May 30, 2007
Hi,
Is it possible to create Expand/Collapse functionality for the grouped data in Table and Matrix data regions? Essentially, the idea is for the user to be able to see the group/subgroup data if she wishes to by clicking on (+/-) symbols, as is usually the case in Tree View style data grid control in web apps. Any ideas how to accomplish the same in reporting services?
Thanks.
View 1 Replies
View Related
Oct 24, 2007
Hey All,
I am developing a data acquistion system which monitors the amount of energy that a user consumes in different parts of a house and displays the information in real time on their computer screen. I am collecting the data through tranducers attached to the circuit breakers in the breaker box and sending the data to analog-to-digital converter channels in a MCU. I am retrieving the data from the serial port and storing it to a text file. Each line of data in the text file represents three fields which are separated by commas. I will be reading data from multiple data collection boxes so the first field is the unit number, the second fied represents the analog-to-digital converter channel number from each unit, and the third field is the data that is collected from the ATD channel. I am trying to use SSE to retrieve the data from the text file, and parse each line of data into individual columns in a databse. Then I want to be able to extract the data associated with a particular ATD channel number from the databse and display it in the appropriate text field on a windows form.
I've got the MCU programmed. I have no problem collecting the data from the serial port, and I can do the visual basic programming okay. I have absolutely no clue how to read the data into the database, continuosly read new values into the databse, and then access the stored data to update the text fields on the form. Please help if you can, I've been working on this specific problem for a couple of weeks and I'm not making any progress. Thanks.
View 1 Replies
View Related
Dec 12, 2007
Hi all experts,
I have a result set like:
Project
Milestone
Info
Project1
M1
Info1
Project1
M1
Info2
Project1
M2
Info3
Project2
M1
Info4
Project2
M2
Info5
Project3
M1
Info6
I need to create a report like:
M1
M2
Project1
Info1
Info2
Info3
Project2
Info4
Info5
Project3
Info6
But while I use matrix to build this report, I got the result like:
M1
M2
Project1
Info1
Info3
Project2
Info4
Info5
Project3
Info6
The report will not show the multiple records on the row group "Project" like item "Info2".
After I referred to the similar problem mentioned on this forums, I tried to use "RowNumber("Matrix1_Project")" to resolve it. But still I got the result like:
M1
M2
Project1
RowNumer
Info1
RowNumer
Info1
RowNumer
Info3
Project2
RowNumer
Info4
RowNumer
Info5
Project3
RowNumer
Info6
It would be much appreciated if anyone could give me some hints to complete the report I need.
Thanks in advance,
Steve Wang 2007/12/12
View 5 Replies
View Related
Jan 18, 2008
I need to retrieve points column from my database for the specific user that is signed on and sum all of them. How can I do it using the Gridview and also code in vb for a label? Thanks.
View 4 Replies
View Related
Nov 19, 2005
Here is my sql procedure:
ALTER PROCEDURE dbo.SoftWareShow /* ( @parameter1 int = 5, @parameter2 datatype OUTPUT ) */ @SoftID uniqueidentifierAS SELECT [SoftID], [SoftName], [SoftJoinDate], [SoftSize], [SoftMode], [SoftRoof], [SoftHome], [SoftDemo], [SoftFirstClassID], [SoftSecondClassID], [SoftDesc], [SoftReadCount], [SoftDownCount],ltrim(rtrim([SoftUrlOne])) SoftUrlOne, ltrim(rtrim([SoftUrlTwo])) SoftUrlTwo, ltrim(rtrim([SoftUrlThree])) SoftUrlThree, ltrim(rtrim([SoftUrlFour])) SoftUrlFour FROM [SoftWare] WHERE ([SoftID] = @SoftID) RETURNwhere I retrieve data using sqldatasource, an error appear. how can do ?
View 1 Replies
View Related
Mar 18, 2008
Hello,
Before I ask a question, I am visually impaired and cannot read printed words only on a screen. I am 51 years old and have been coding professionally since I was 23 (yes that long). I have four apps on the market and run a small consultancy company in the UK and my SQL knowledge is scant. I have read two books on the subject and thought I had an idea on how SQL works.
I used to belong to another forum but they gave me a hard time so please go easy on me.
I developed an ADO app ages ago and remembered some of it ...
I have four tables (the following is a simplified version of the real thing)
MainTable (Contact data like name address etc. 23 fields)
Towns (Two fields TownUIN and TownName)
Counties (Two fields CountyUIN and CountyName)
Countries (Two fields CountryUIN and CountryName)
My database is normalised to 3NF and contains no duplicate or redundant data.
My problem ...
Sample data
Main:
MainUIN MainName MainTown
1000 Fred Bloggs 1
1001 Fred Smith 2
Towns:
TownUIN TownName
1 Bradford
2 Leeds
SELECT MainName,MainTown FROM Main WHERE MainUIN=1000 returns
'Fred Bloggs' 1 (the TownUIN)
I want ...
'Fred Bloggs' 'Bradford'
It was suggested I use
SELECT MainName,MainTown FROM Main,Towns WHERE MainUIN=1000 AND TownUIN=MainTown
This returned 'Fred Bloggs' 'Bradford' but was slow.
My question is what am I doing wrong?
I am using SQL Server 2005 Express with VB.Net 2005 on Vista Business and XP.
I am sorry my SQL knowledge is weak please dont get angry just tell me the basic thing that I do not know.
View 7 Replies
View Related
Jul 20, 2005
Hi.I have a IIS server with php3 installed. I have SQL server databaseand data stored in unicode format (nvarchar fields). In header of myphp I have the meta: <meta HTTP-EQUIV="content-type"CONTENT="text/html; charset=UTF-8">.I have the following problem:- I trie to do a query using ODBC (version 3.525.1022.0) and SQLServer odbc driver (version 200.85.1022.00). The query doesn'tretrieve information in utf format and accents and extra charactersaren't showed correctly.- I trie to di the query usin native OLE DB. I use mssql funtions andthe problem is the same.If I install php4 and I use "newCOM("ADODB.Connection",NULL,CP_UTF8);", then it works correctly.Anybody knows if its posible to retrieve data from sql-server in utf-8format using php3?I see in other postings that odbc driver only accept utf-8 in version3.7 or higher? Is it true? If is true, where I can download odbcdriver 3.7?Thank's in advance.Miki.
View 1 Replies
View Related
Jun 19, 2006
i need to retrieve data from a particular field of the gridview according to the selected row to stored it into session .....what i had done so far as following: Protected Sub GridView1_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) DetailsView1.PageIndex = GridView1.SelectedIndex Session.Add("receiverName", GridView1.??????) End Sub????? is the part i am not sure what to code.... i tried different method by seems to have problem of convertion.
View 1 Replies
View Related
Jul 18, 2006
Okay, I used the SQLDataSource control to get my data from the database
table. What or how do I retrieve individual data from the
sqldatasource? I want to do some string comparison and manipulation
before I display it to the browser. How can this be accomplish?
Help is appreciated.
View 21 Replies
View Related
Feb 28, 2007
Hi,
I have a website which is designed to search for employee information. I have the search system working which does exactly what I want to, but as an added feature I want there to be a button which, when someone clicks on it, it takes whatever the previous search was and generates a set of data in XML format which is based on the results. For example:
User searches for all entries with Forename = John; Results are listed in a gridview as per expected.
User then presses button with XML on it, and page pops up with just the XML output on it, i.e. whatever results are on the gridview but in a nested XML format
<records> <record> <Forename>John</Forename> <Surname>Smith</Surname> <Email>j.smith@blah.com</Email> <Ext>1234</Ext> <DeptList>History</DeptList> </record></records>
I have created a stored procedure which will take the parameters from the search boxes and return the above information, but I don't know if this is the best way. Here it is for those interested:
CREATE PROCEDURE ps_record_SELECT_NameSurnameEmailExtDeptasXML
@Forename varchar(50),
@Surname varchar(50),
@Email varchar(50),
@Ext varchar(4),
@DeptList varchar(50)
AS
SELECT Forename, Surname, Email, Ext, DeptList
FROM dbo.record
WHERE Forename LIKE COALESCE(@Forename,Forename) AND
Surname LIKE COALESCE(@Surname,Surname) AND
Email LIKE COALESCE(@Email,Email) AND
Ext LIKE COALESCE(@Ext,Ext) AND
DeptList LIKE COALESCE(@DeptList,DeptList)
FOR XML AUTO, ELEMENTS
If someone could be kind enough to help me out with this, I'd be really grateful.
Many thanks,
Tom
View 2 Replies
View Related
Mar 19, 2007
Last night I face performace problems in web site. I got like 100 000 users and site fails because of sql-connections.
Currently I'm making a new connection for every query, and my code looks like this:Public Shared Function executeQueryReturnDataset(ByVal strsql As String) As DataSet
Dim sqlConnection As New SqlConnection(Connstr)
Dim sqlCommand As New SqlCommand(strsql, sqlConnection)
Dim sqlDataSet As New DataSet
Try
sqlConnection.Open()
Dim myDataAdapter As New SqlDataAdapter
myDataAdapter.SelectCommand = sqlCommand
myDataAdapter.Fill(sqlDataSet)
Catch e As Exception
Console.Write(e.ToString())
Finally
sqlConnection.Close()
End Try
Return sqlDataSet
End Function I was wondering would it be better to save an instance from connection object to memory and use that same connection for all querys?
View 4 Replies
View Related
Jan 23, 2008
Background:I am using Visual Studio 2005 Standard SP1 to create an ASP.NET website that accesses an SQL 2005 database. I am using vb.net as well.I am passing an ID in a query string from one page to the next, where I retrieve it using an SQLDataSource. The data will only be one row; it is returning customer information.Problem:I need to be able to get specific fields from the SQLDataSource and populate some textboxes. Honestly, I'm not really sure where to begin. For the sake of argument, let's say that I am working with this:'My TextboxDim LastName As Textbox'My SQLDataSource (filtered by query string using the customer's ID to only get 1 customer's information at a time)SQLDataQuestion:So, how would I go about retrieving the lastname field from SQLData and inserting it into the textbox LastName?Thanks, J'Tok
View 2 Replies
View Related
Mar 1, 2008
Dears,
I'm using FormView to insert and retrieve data from SQL Server Database 2000. I'm using stored procedure to insert and display data by using C#.
Every time I insert the data, I can't retrive it. To retrieve all the inserted data, I have to close my website, and then reopen it again.
I close the connection every time after using the stored procedures, but nothing happened.
What do you think the problem is ??
View 3 Replies
View Related
Mar 14, 2006
Let us suppose that there are 900 rows in One table, and that table contains neither primary key, nor Identity column.
How can I retrieve all the roows from 201 to 250?(like the middle limits)
In oracle there is a property called RowID, but is there any such item in SQL server?
View 1 Replies
View Related
Jul 23, 2007
I wonder how to get top 1 row per account number. Let's say I have
--snip--
IDENTITY_ID | ACCT_NUMBER
0001 | 1111-2222
1001 | 1111-2222
2002 | 2222-0000
3003 | 2222-0000
4004 | 1111-2222
--snip--
I used the SQL-Query here
Code:
SELECT * FROM BACKUP_LOG ORDER BY IDENTITY_ID DESC
[code]
Since they are in descending order by IDENTITY_ID, so I only want to get 1 distinct account number somehow.. Like this...
[code]
4004 | 1111-2222
3003 | 2222-0000
I couldn't figure it out.
Thanks...
View 9 Replies
View Related
Jul 21, 2004
I have a table called Questions and I need to retrieve 10 rows of data randomly each time. If I use
SELECT TOP 10 Question FROM Questions
I'll get the same questions each time when I execute the sql statement. Is there a way to get the random data? Thanks.
View 1 Replies
View Related
Feb 20, 2005
Hello
Is there any way in which i can retirve data using input parameters?
View 14 Replies
View Related
Sep 9, 2014
Here is the sample xml
<ClinicalDocument xmlns:sdtc="urn:h12-org:abcd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="urn:h12-org:v3">
<realmCode code="US" />
<typeId extension="POCD_HD000040" root="2.16.840.1.113883.1.3" />
<templateId root="2.16.840.1.113883.10.20.22.1.1" />
<id root="226ff30f-3b1f-11e3-a969-005056bb0109" />
[code]....
how to write a sql query.
View 2 Replies
View Related
Jan 12, 2006
Hi, everione,
I am having a big problem, trying to create datebase.
I have 3 tables: SUPERAVATAR, MASTERAVATAR, MEGAAVATAR.
- SuperAvatars are heroes in an online role playing gaming. They have an ID, ‘superavatarID’ which contain an UNIQUE NUMBER NOT NULL PRIMARY KEY to identify them.
A wisdom – ‘trickster’,’conjuror’,’magician’, etc..
A current owner… who is the user or player of the game and has that Super Avatar– we associate the link to USERID to know the person.
SuperAvatars can be fathers or mothers of Mega Avatars.
-MegaAvatars are the children of SuperAvatars…. They also have an ID UNIQUE NUMBER NOT NULL PRIMARY KEY to indentify them.
A magic power – it can be a ‘Leader’ or ‘Sheep’…
A ‘parent’ – parent is the number identifying to know to who Super Avatar belongs.
e.g.
SUPERAVAT WISD CURRENTOWNER FATHEROF MOTHEROF
1 Thick 3 1
2 Mentally Ch. 11 3
3 Smart 9 2
4 Genius 16 4
5 Thick 19
MEGAAVATARID MAGICPOWER PARENT
1 MAGICIAN 1
2 WIZARD 3
3 SORCERER 2
4 MAGICIAN 4
-We see that MEGAAVATAR 1 has a magic power as Magician and his father is ‘1’. ‘1’ identifies the SUPERAVATAR.
We see SUPERAVATARID…. who has the number ‘1’? the first in the row… who has wisdom – thick and he belongs to the USER with ID number 3.
-We see MEGAAVATARID… we choose the number 2…. His magic power is as WIZARD… and his father is the number 3.
We see SUPERAVATARID now… we look up the SuperavatarID 3…. We can see he has a wisdom – GENIUS… who belongs to the USERID 16 and he is father of MEGAAVATAR number 2.
The list can carry on and never stop.
I have this Problems:
We create in this example 3 tables: Users, SuperAvatar, MegaAvatar
SQL
CREATE TABLE users(userID NUMBER CONSTRAINT pk_user PRIMARY KEY,email VARCHAR2(50) NOT NULL UNIQUE,password VARCHAR2(15) NOT NULL UNIQUE,subscription CHAR(8) NOT NULL CHECK (subscription IN('ACTIVE' , 'INACTIVE' ) ) );
CREATE TABLE superavatar(superavatarID NUMBER CONSTRAINT pk_superavatar PRIMARY KEY, wisdom VARCHAR2(19) NOT NULL CHECK (wisdom IN ('THICK', 'MENTALLY CHALLENGED', 'AWAKE', 'SMART', 'GENIUS')), currentOwner NUMBER NOT NULL, fatherOf NUMBER,motherOf NUMBER);
CREATE TABLE megaavatar (megaavatarID NUMBER CONSTRAINT pk_megaavatar PRIMARY KEY, magicPower VARCHAR2(12) NOT NULL CHECK (magicPower IN('TRICKSTER','CONJUROR','MAGICIAN','WIZARD','SORCERER')), parent NUMBER);
Now, the 3 tables are created…..
What happen when we try to insert values to this table?
In this case we insert to User Table some examples:
INSERT INTO users VALUES('3','john@hotmail.com','great78','ACTIVE');
INSERT INTO users VALUES('9','chrisandsandra@gmail.com','chrisandra)','ACTIVE');
Now, we insert to SuperAvatar some examples;
INSERT INTO superavatar VALUES('1','THICK','3','1','');
INSERT INTO superavatar VALUES('3','SMART','9','3','');
|
|
‘9’ is the UserID that we already insert to the User table
What’s the problem?
We have to insert manually the data from USERID to CURRENTOWNER as we didn’t match or link CURRENTOWNER from SUPERAVATAR Table to USERID from USER Table with a SQL CODE.
What happen if we have thousands of USERS that they register to this game…? We will never know to how belongs that SUPERAVATAR but if someone do it manually can spend a year.
I am trying to fix this problem …. I add in SUPERAVATAR TABLE ‘CHECK’ in currentOwner..
SQL> CREATE TABLE superavatar
(superavatarID NUMBER CONSTRAINT pk_superavatar PRIMARY KEY, wisdom VARCHAR2(19) NOT NULL CHECK (wisdom IN ('THICK', 'MENTALLY CHALLENGED', 'AWAKE', 'SMART', 'GENIUS')),
currentOwner NUMBER NOT NULL CHECK (currentOwner IN(SELECT userID FROM users)),
fatherOf NUMBER,
motherOf NUMBER);
*
ERROR:
ORA-02251: subquery not allowed here
It doesn’t work.
Please HELP, I have exam tomorrow
thank you
Desy
View 1 Replies
View Related
