Up till now I've used SP's for updates and only ever needed to return error messages.
Now I have an SP that checks and validates something and has to return a string containing the result, (always a string/varchar!)
It works fine in Query Analyzer, I just need a demo of how to incorporate it into a VB app.
Hope that makes sense.
Thanks
Mark
This procedure gives a error : " Msg 245, Level 16, State 1, Procedure YAMAN, Line 16
Conversion failed when converting the nvarchar value 'user' to data type int. "
How can i return string value
ALTER procedure [dbo].[YAMAN]
(@username varchar(20),@active varchar(20))
as
begin
if exists (select username from aspnet_Users where username=@username)
begin
if @active=(select active from aspnet_Users where username=@username)
return 'already exist'
else
begin
update aspnet_Users set active=@active where username=@username
return 'update'
end
end
else
return 'user does not exist'
end
Yaman
Using SQL Server 2000...I wrote a wrapper to call a sub proc (code provided below). Theintended varchar value returned in the output parameter of each procis a string implementation of an array.(The string separates elements by adding a period after each value.e.g. 1. 2. 3. 4. 5. etc., although my simplified example only createstwo elements.)My vb.net calling code parses the returned string into individualelements.I TESTED BOTH PROCS FIRST:The wrapper returns 'hello' when I test it by insertingSELECT @lString='hello'before the GO, so I believe it is called properly.The sub_proc returns the "array" I want when I call it directly.THE PROBLEM: When I call the wrapper, and expect it to call sub_proc,it returns a zero.In fact, when I assign a literal (like 'hello') to @lString insub_proc, 'hello' is not returned.So the wrapper is not calling the sub_proc, or the sub_proc is notreturning an output value.OR...I have read about some issues with OUTPUT string parameters beingtruncated or damaged somehow when passed. I doubt this is theproblem, but I'm open to anything.I want to use the wrapper because, when it's finally working, it willcall several sub_procs andreturn several output values.Any thoughts? Thanks for looking at it! - BobThe Wrapper:-----------------------------------------------------------------CREATE PROCEDURE wrapper@lString varchar(255) OUTASEXEC @lString = sub_proc @CommCode, @lString OUTGO-----------------------------------------------------------------The subordinate procedure:-----------------------------------------------------------------CREATE PROCEDURE sub_proc@lString varchar(255) OUTASDECLARE @var1 int,@var2 intSELECT @var1 =(SELECT count(mycolumn)FROM mytableWHERE condition=1)SELECT @var2 =(SELECT count(mycolumn)FROM mytableWHERE condition=2)/* If @var1 returns 5 and @var2 returns 7, Then @lString below wouldbe "5. 7." */SELECT @lString = STR(@var1) + '.' + STR(@var7) + '.'GO-----------------------------------------------------------------
View 3 Replies View Related
I have a package that I have been attempting to return a error code after the stored procedure executes, otherwise the package works great.
I call the stored procedure from a Execute SQL Task (execute Marketing_extract_history_load_test ?, ? OUTPUT)
The sql task rowset is set to NONE. It is a OLEB connection.
I have two parameters mapped:
tablename input varchar 0 (this variable is set earlier in a foreach loop) ADO.
returnvalue output long 1
I set the breakpoint and see the values change, but I have a OnFailure conditon set if it returns a failure. The failure is ignored and the package completes. No quite what I wanted.
The first part of the sp is below and I set the value @i and return.
CREATE procedure [dbo].[Marketing_extract_history_load_TEST]
@table_name varchar(200),
@i int output
as
Why is it not capturing and setting the error and execute my OnFailure code? I have tried setting one of my parameter mappings to returnvalue with no success.
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
Hi All, I have to return a string value from the store procedure. If condition success BEGIN RETURN 'Success' END ELSE BEGIN RETURN 'Fail' ENDI am retrieving this value with ExecuteReturnQuery() method. But it gives me the error like "Conversion failed when converting the varchar value to data type int."can anyone please help me for this?Thank you.Regards.
View 5 Replies View RelatedHow can i do ?
It's always display error : "Can' not convert nvarchar to int"
Thank you very much.
Seems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID, S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName', T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID FROM [Item].ItemDetails I INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID FROM [Item].ItemDetails IOr something like that... Any thoughts?
View 3 Replies View RelatedI have a stored procedure that selects the unique Name of an item from one table.
SELECT DISTINCT ChainName from Chains
For each ChainName, there exists 0 or more StoreNames in the Stores. I want to return the result of this select as the second field in each row of the result set.
SELECT DISTINCT StoreName FROM Stores WHERE Stores.ChainName = ChainName
Each row of the result set returned by the stored procedure would contain:
ChainName, Array of StoreNames (or comma separated strings or whatever)
How can I code a stored procedure to do this?
Hi guys I know this is a really common question, and I have read loads of replies on it but everything I try does not work. I have written a small stored procedure in SQL server to upload images to a table and return the new ID using scope_identity. I have tested it and it works fine. here it is:******* @siteID numeric(18,0), @imgNum numeric(18,0), @title NVarchar(50), @MIMEtype nchar(10), @imageData varbinary(max)ASBEGINSET NOCOUNT ONdeclare @imageID intINSERT INTO [site_images] ([img_siteID], [img_num], [img_title], [img_MIME], [Img_Data]) VALUES (@siteID, @imgNum, @Title, @MIMEType, @ImageData) SET @imageID = SCOPE_IDENTITY()RETURN @imageIDSET NOCOUNT OFF************If I run this in management studio express it runs fine and returns the ID under 'return value'. The problem I have is trying to actually call that return value in VB. If I try using these lines:Dim returnParam As SqlParameterreturnParam = New SqlParameter("@imageID", SqlDbType.UniqueIdentifier)returnParam.Direction = ParameterDirection.OutputcmdTest.Parameters.Add(returnParam)withcnBKTest.Open()cmdTest.ExecuteNonQuery() imageIDparam = returnParam.value.toStringcnBKTest.Close() I get the error "procedure has too many arguments specified"And if I try to access the return value like this: imageIDparam = cmdTest.Parameters("@return_value").ValueI get the error "@return_value is not contained by this sqlparametercollection" What am I doing wrong? Any help would be greatly appreciated. Robsa
View 3 Replies View RelatedI have written this stored procedure but I get no return value (neither 0 nor 1). What I hope is when the transaction successful, return value 1. If fails, return value 0.1 set @TransactionOk = 0
2
3 BEGIN TRAN
4
5 UPDATE WhiteList_IMEI SET WhiteList_IMEI_Used = 1, Whitelist_IMEI_UsedDate = getdate()
6 WHERE WhiteList_IMEI_Code = @IMEICode_New
7
8 IF @@ERROR <> 0
9 BEGIN
10 ROLLBACK TRAN
11
12 PRINT ('Error. Contact Software Engineer.')
13 RETURN
14 END
15
16 COMMIT TRAN
17 set @TransactionOk = 1
Hi,
I have been trying to this this for quite a while with no joy can someone please tell me the error of my ways. I am trying to add a new record by stored procedure, this I can do, but my problem lies with the returnvalue part of the procedure. I cannot get it to work. When I debug it tells me that the "Specified cast is not valid" see C# code as i comment the line where it errors. I enclose a sample stored procedure and its c# code. Please can someone tell me where I am going wrong? as this is annoying me alot
SQL:create procedure SPUAddVehicleInsert
@VehicleDetailsRegistrationNumber varchar(50),
@VehicleDetailsMake varchar(50),
@VehicleDetailsModel varchar(50),
@NID bigint =null
as
insert into tblvehicledetails
(
VehicleDetailsRegistrationNumber,
VehicleDetailsMake,
VehicleDetailsModel,
)
values
(
@VehicleDetailsRegistrationNumber,
@VehicleDetailsMake,
@VehicleDetailsModel,
);
select @NID = scope_identity();c# code on sqldatasource: protected void dsAddVehicle_Inserted(object sender, SqlDataSourceStatusEventArgs e)
{
Int64 VID = (Int64)e.Command.Parameters["NID"].Value; //errors with specified cast is invalid
Response.Redirect("details.aspx?VID=" + VID.ToString());
}
protected void dsAddVehicle_Inserting(object sender, SqlDataSourceCommandEventArgs e)
{
SqlParameter p = new SqlParameter("NID", SqlDbType.BigInt);
p.Direction= ParameterDirection.ReturnValue;
e.Command.Parameters.Add(p);
}
sql datasource:<asp:SqlDataSource ID="dsAddVehicle" runat="server" ConnectionString="<%$ ConnectionStrings:National %>"
InsertCommand="SPUAddVehicleInsert" InsertCommandType="StoredProcedure" SelectCommand="SPUAddVehicleSelect"
SelectCommandType="StoredProcedure" OnInserted="dsAddVehicle_Inserted" OnInserting="dsAddVehicle_Inserting">
<InsertParameters>
<asp:Parameter Name="VehicleDetailsRegistrationNumber" Type="String" />
<asp:Parameter Name="VehicleDetailsMake" Type="String" />
<asp:Parameter Name="VehicleDetailsModel" Type="String" />
</InsertParameters>
</asp:SqlDataSource>
I have a stored procedure that returns an integer value, declared as:Public Function MyProc(..) As Int32 . . Return <integer>End FunctionI return an integer value, and can do this and get the value returned from the method, as such:declare @rc intexec @rc = dbo.MyProc <params>select @rcThis returns the value; how do I return the value to code and get the value; I've been debugging and that is my problem, I can't get the value to return.Thanks a lot.
View 2 Replies View RelatedHello all of members, I have written a Stored Procedure.that creates a new account and then returns a value witch displays a result to me.if result is 1 "Username already exists" or 2 "E-Mail already exists".I did it with "Return" instruction.But, I don't know how can I get the returned value in ASP.NET(VB.NET)? Please help me. Thanks in advance
View 3 Replies View RelatedHi all,Is there anyway to get a returned value from a called Stored Procedure from within a piece of SQL? For example, I have the following code...DECLARE @testval AS INTSET @testval = EXEC u_checknew_dwi_limits '163'IF (@testval = 0)BEGIN PRINT '0 Returned'ENDELSEBEGIN PRINT '1 Returned'END...which
as you can see calls a SP called 'u_checknew_dwi_limits'. This SP
(u_checknew_dwi_limits) actually returns a value (1 or 0), so I want to
assign that value to the '@testval' variable (as you can see in my
code) - but Query Analyser is throwing an error at me. Is this the
correct way to do this?ThanksTryst
I have a Stored procedure (sql 2000), that inserts data into a table. Then, I add this, at the end: Return Scope_Identity()
I have the parameters for the sProc defined and added to the Command, but I'm having a really lousy time trying to figure out how to get the return value of the Stored PRocedure. BTW - I'm using OleDB instead of SQL due to using a UDL for the connection string.
I have intReturn defined as an integer
I've tried :Dim retValParam As OleDbParameter = cmd.Parameters.Add("@RETURN_VALUE", OleDbType.Integer)retValParam.Direction = ParameterDirection.ReturnValueintReturn=cmd.Parameters("@RETURN_VALUE").Value
whenever I add this section - I get an error that there are too many arguments for the sProc.
I've tried:intreturn=cmd.ExecuteNonquery - tried adding a DataReader - using ExecuteScalar - I've tried so many things and gotten so many errors - I've forgotten which formations go with which errors.
What is the best way to do this in the code part (VB.Net)?
Thanks ahead of time
I don't know whey this code does not return the values when I run it in sql server 2005 manager.set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[usp_usr_Add]
@FName nvarchar(30),
@LName nvarchar(30),
@UserName nvarchar(20),
@Password nvarchar(20),
@Email nvarchar(50),
@Country nvarchar(2),
@AIM nvarchar(10)
AS
SET NOCOUNT ON
BEGIN
DECLARE @usrID int
DECLARE @usrEmail int
SELECT @usrID = NULL
SELECT @usrEmail = NULL
SELECT @usrID = usrID FROM usr WHERE usrName = @UserName
IF (@usrID IS NOT NULL )
BEGIN
RETURN 1
END
SELECT @usrEmail = usrID FROM usr WHERE usrEmail = @Email
IF (@usrEmail IS NOT NULL)
BEGIN
RETURN 2
END
INSERT INTO usr (usrFName, usrLName, usrName, usrPassword, usrEmail, usrCountry, usrAIM, usrJoinDt)
VALUES (@FName, @LName, @UserName, @Password, @Email, @Country, @AIM, GetDate())
RETURN 0
END
When i run this code i executes fine except when the two conditions become true they do not return thier values, nor does it return 0 when it inserts a row.
Hi
I have the following stored procedure which when exectuted within the Query Analyzer adds a record and returns the @SeqRunNo value. However when I call
it in the from ado the record is added but the value is empty.
I enter the parameter as:
.Parameters.Append .CreateParameter("@SeqRunNo", adVarChar, adParamOutput, 4)
and try and access it as:
SeqRunNo = oCommand.Parameters("@SeqRunNo").Value
Any ideas?
Thanks.
john
CREATE PROCEDURE up_mix_Set_Seq_Run_No
@IID int,
@TrackingID int,
@ADP_Code varchar(6),
@ClientID varchar(20),
@SeqRunNo varchar(4) OUTPUT
AS
DECLARE @Max_Seq_No int,
@Seq_No varchar(4),
@LastUpdate datetime
SELECT @Seq_No = QTR_SEQ_RUN_NO FROM Transmission_Quarter
WHERE IID = @IID
AND Tracking_ID = @TrackingID
AND ADP_Code = @ADP_Code
IF ISNULL(@Seq_No,0) = 0
BEGIN
SET @LastUpdate = GETDATE()
SELECT @Max_Seq_No = CAST(MAX(QTR_SEQ_RUN_NO) AS int)
FROM Transmission_Quarter
WHERE IID = @IID
AND ADP_Code = @ADP_Code
IF ISNULL(@Max_Seq_No,0) = 0
BEGIN
SET @SeqRunNo = '0001'
END
ELSE
BEGIN
IF @Max_Seq_No = 9999
BEGIN
SELECT @SeqRunNo = '0001'
END
ELSE
BEGIN
SELECT @SeqRunNo = REPLICATE('0', 4 - DATALENGTH(CAST(@Max_Seq_No AS VARCHAR))) + CAST((@Max_Seq_No + 1) AS VARCHAR)
END
END
INSERT INTO Transmission_Quarter
(IID, Tracking_ID, QTR_SEQ_RUN_NO, ADP_Code, Last_Updated_By, Last_Updated_Date)
VALUES
(@IID, @TrackingID, @SeqRunNo, @ADP_Code, @ClientID, @LastUpdate)
END
ELSE
BEGIN
SELECT @SeqRunNo = @Seq_No
END
GO
How do I get then return value from an insert stored procedure?
for example:
CREATE PROCEDURE sp_ReceiptsInsertc
@Branch_ID int,
@Source varchar(1),
@BatchNo varchar(8),
@Amount money ,
@Iden int OUTPUT
AS
INSERT INTO Receipts(Branch_ID, Source, BatchNo, Amount)
VALUES (@Branch_ID, @Source, @BatchNo, @Amount)
SELECT @Iden=@@Identity
GO
Thanks
How do I get then return value from an insert stored procedure?
for example:
CREATE PROCEDURE sp_ReceiptsInsertc
@Branch_ID int,
@Source varchar(1),
@BatchNo varchar(8),
@Amount money ,
@Iden int OUTPUT
AS
INSERT INTO Receipts(Branch_ID, Source, BatchNo, Amount)
VALUES (@Branch_ID, @Source, @BatchNo, @Amount)
SELECT @Iden=@@Identity
GO
Thanks
Hello Newsgroup !My Tools are:Windows 2000, VBA(Access 2000) and MS SQL Server 7.0I wrote in an *.adp project (Access 2000) a Stored Procedure "xyz"with parameters a,bIn my VBA Code i wrote:Dim par As New ADODB.ParameterCmd.CommandType = adCmdStoredProcCmd.CommandText = "[prcSucheUNRWIAEStichtag]"Set par = Cmd.CreateParameter("@a", adInteger)Cmd.Parameters.Append parSet par = Cmd.CreateParameter("@b", adVarChar, adParamInput, 5)Cmd.Parameters.Append par........Cmd.Parameters(0) = aCmd.Parameters(1) = bSet rsTemp = Cmd.ExecuteNow my Problem is the following:there is an error in the stored procedure and i want to use something likethis:if @idontknow = '000000000'Beginreturn(1) -- Something <>0endHow can i use this return value in my VBA code ? Maybe i should ask thisquestion in an other Newsgroup. Pleaselet me know in which oneGreetingsFrank
View 2 Replies View RelatedIn one of my SSIS jobs I have an 'Execute SQL Task' which is calling a stored procedure. This SP returns 0 or 1, if the SP returns 1 the package needs to stop executing. Is there a way to get the value that is returned from the SP and either continue or stop the job from continuing to run?
so if value is 0 it goes to the next step, if its 1 it stops running
Greetings All,
I am a newbie to SSIS and need some help. I need to get the return value from a stored procedure into a SSIS variable. I'm assuming I would use an OLE DB Command but I havn't a clue on how to capture the return value. Can someone get me started on how I can do this?
Note, the return value is actually an identity of the inserted value. I need this value in my data flow for further processing.
Thanks is advance!
I am have stored procedure that accepts one parameter and returns a single value
The sp works fine.
My question is how do I set the c# webpage to return the single value.
I need a specific example of how to code.
this is how the code should work.
A blank form is loaded, when the user clicks submit I need the code to pull the Login name from the text box and check to see if it exist. I have the sp working the way I need it to. But I can figure how to pull the single value into a variable in the code behind.
I am using dataset elsewhere on the site, so I created a ds the calls the sp. Can it work this way?
thanks,
Hi AllHere is my SPALTER PROCEDURE dbo.InsertPagerDays @ReportEndDate datetime, @PagerDays int,@UserID varchar(25)ASIF EXISTS(-- you cannot add a pager days more than once per report dateSELECT ReportEndDate, UserId from ReportPagerDays where ReportEndDate = @ReportEndDate and UserId = @UserID)Return 1 elseSET NOCOUNT OFF;INSERT INTO [ReportPagerDays] ([ReportEndDate], [PagerDays], [UserID]) VALUES (@ReportEndDate, @PagerDays, @UserID)RETURNMy Question is, this SP will not let you enter in a value more than once (which is what i want) but how do I write my code to inform the user? Here is my VB code becuase the SP does not error out (becuase it works it acts as if the record updates)How can I catch the Return 1'set parameters for SPDim cmdcommand = New SqlCommand("InsertPagerDays", conn)cmdcommand.commandtype = CommandType.StoredProcedurecmdcommand.parameters.add("@ReportEndDate", rpEndDate)cmdcommand.parameters.add("@PagerDays", PagerDays)cmdcommand.parameters.add("@UserId", strUserName)Try'open connection hereconn.Open()'Execute stored proccmdcommand.ExecuteNonQuery()Catch ex As Exceptionerrstr = ""'An exception occured during processing.'Print message to log file.errstr = "Exception: " & ex.Messagelblstatus.ForeColor = Drawing.Color.Redlblstatus.Text = "Exception: " & ex.Message'MsgBox(errstr, MsgBoxStyle.Information, "Set User Report Dates")FinallyIf errstr = "" Thenlblstatus.ForeColor = Drawing.Color.Whitelblstatus.Text = "Pager Days Successfully Added!"End If'close the connection immediatelyconn.Close()End Try
View 1 Replies View RelatedI have the following stored procedure for SQL Server 2000: SELECT a.firstName, a.lastName, a.emailfrom tbluseraccount ainner join tblUserRoles U on u.userid = a.useridand u.roleid = 'projLead' Now, this is not returning anything for my dataset. What needs to be added?Here is the code behind:Dim DS As New DataSetDim sqlAdpt As New SqlDataAdapterDim conn As SqlConnection = New SqlConnection(DBconn.CONN_STRING)Dim Command As SqlCommand = New SqlCommand("myStoredProcdureName", conn)Command.CommandType = CommandType.StoredProcedureCommand.Connection = connsqlAdpt.SelectCommand = CommandsqlAdpt.Fill(DS) Then I should have the dataset, but it's empty.Thanks all,Zath
View 5 Replies View RelatedThis is my SP:SELECT CAST(id AS varchar(10)) + ' - ' + UserName AS 'User List', Scanned, Scripts AS 'Total Scripts', Processed,CAST((Processed/ Scripts)* 100.0 as int) AS 'DONE (%)'FROM tblworkQueueProcessed and Scripts are both DataTypes of intMy DONE(%) column comes back with 0Any idea where I am going wrong?
View 2 Replies View RelatedI'm attempting to return a value from my stored procedure. Here is my button click event that runs the stored procedure. protected void btn_Move_Click(object sender, EventArgs e)
{
/*variables need for the update of the old staff record
and the creation of the new staff record.
*/
BMSUser bmsUser = (BMSUser)Session["bmsUser"];
int staffid = Convert.ToInt32(bmsUser.CmsStaffID);
int oldStaffProfileID = Convert.ToInt32(Request.QueryString["profileid"]);
string newManager = Convert.ToString(RadComboBox_MangersbyOrg.Text);
int newMangerProfileID = Convert.ToInt32(RadComboBox_MangersbyOrg.Value);
SqlConnection conn = new SqlConnection(connect);
SqlCommand cmd = new SqlCommand();
cmd.Connection = conn;
cmd.CommandType = CommandType.StoredProcedure;
cmd.CommandText = "sp_BMS_MoveStaffMember";
cmd.Parameters.Add("@OldStaffProfileID", SqlDbType.Int);
cmd.Parameters["@OldStaffProfileID"].Precision = 9;
cmd.Parameters["@OldStaffProfileID"].Scale = 0;
cmd.Parameters["@OldStaffProfileID"].Value = oldStaffProfileID;
cmd.Parameters.Add("@NewManagerProfileID", SqlDbType.Int);
cmd.Parameters["@NewManagerProfileID"].Precision = 9;
cmd.Parameters["@NewManagerProfileID"].Scale = 0;
cmd.Parameters["@NewManagerProfileID"].Value = newMangerProfileID;
cmd.Parameters.Add("@LastModifiedBy", SqlDbType.Int);
cmd.Parameters["@LastModifiedBy"].Precision = 9;
cmd.Parameters["@LastModifiedBy"].Scale = 0;
cmd.Parameters["@LastModifiedBy"].Value = staffid;
SqlParameter sp = new SqlParameter("@OLDManagerReturn", SqlDbType.Int);
sp.Direction = ParameterDirection.Output;
cmd.Parameters.Add(sp);
lbl_ERROR.Text = Convert.ToString(sp);
conn.Open();
SqlTransaction trans = conn.BeginTransaction();
cmd.Transaction = trans;
cmd.ExecuteNonQuery();
conn.Close();
My parameter sp is coming back null for some reason. Am I not setting the parameter correctly? I set a break point and it says the value is null.
Here is the parts of my stored proc returning the value...
DECLARE @OLDManagerReturn numeric(9)
SELECT @OLDManagerReturn = ManagerProfileID FROM tblBMS_Staff_rel_Staff WHERE StaffProfileID = @OldStaffProfileID AND Active=1 AND BudgetYear = @BudgetYear
RETURN @OLDManagerReturn
Hello there,
I searched for answers to the above topic, but could not find what I want. My stored procedures and triggers are returning a message based on the result, mostly error messages. How can I get that message using ASP.Net? Should I use an output parameter?
Thank you for your help.
Hi, nice to meet you all. I'm new developer and need help. Normally i use "sqldatasource1.select()", but need to fill argument, what is argument? Actually the main point i wan to return a value from stored procedure or got any methods can do this way? Hope you all can help me.... Thank
View 4 Replies View Relatedhi everybody,
I have two stored procedures lets say A and B and a variable inside stored procedure A lets say @BReturn, now, what is the syntax to execute B inside A and to store its returned value in @BReturn? any help is greatly appriciated.
devmetz.
I'm not sure if anybody else is having a problem with the Return Value of Stored Procedures where you get the "Specified cast not valid" error, but I think I found a "bug" in VS2005 that prevents you from having a return value other than Int64 datatype. I tried to look for the solution for myself on the forums but unfortunately I just couldn't find it. Hopefully, this will help out anyone who had come across the same problem.
Basically, I have a stored procedure that I wanted to call as an Update for my ObjectDataSource that returns a Money value. Everytime I do this, I keep getting that error saying "Specified cast not valid" even when I try to change the @RETURN_VALUE data type to Currency or Money. After a long session of eye gouging moments, I decided to look at the code for my dataset. There, I noticed that the ScalarCallRetval for my StoredProcedure query was still set to System.Int64. I changed it to System.Object and, like a miracle, everything works like its suppose to.
Ex. protected void SomeObjectDataSource_Updated(object sender, ObjectDataSourceStatusEventArgs e)
{GrandTotalLabel.Text = ((decimal)e.ReturnValue).ToString("C");
}
Hi everyone, I have a stored procedure as the following:1 ALTER PROCEDURE dbo.logincheck2 @ID int,3 @Password varchar(50),4 @Result int output5 AS6 IF EXISTS (SELECT * FROM users WHERE (ID=@ID AND Password=@Password))7 BEGIN8 SET @Result=19 END10 11 ELSE12 BEGIN13 SET @Result=014 END15 16 RETURN @Result What I'm trying to do is using @result in my login.aspx.vb to check if user exists in my database. If he is, the result should be 1 and if not it should be 0. Unfortunately, I don't know how to do it. I must submit my project in 2 days and I'm desperately seeking for help. Here is my code: 1 Dim sqlcon As New SqlClient.SqlConnection2 Dim sqlcmd As New SqlCommand()3 Dim sonuc As Integer = 04 If IsValid Then5 sqlcon.ConnectionString = "Data Source=.SQLEXPRESS;AttachDbFilename=C:UsersShadow ShooterWebSiteMainProjectApp_Datamydb.mdf;Integrated Security=True;User Instance=True"6 sqlcon.Open()7 sqlcmd.Connection = sqlcon8 sqlcmd.CommandType = CommandType.StoredProcedure9 sqlcmd.CommandText = "logincheck"10 sqlcmd.Parameters.Add("@ID", SqlDbType.Int, 4, "ID")11 sqlcmd.Parameters("@ID").Value = txtUsername.Text12 13 sqlcmd.Parameters.Add("@Password", SqlDbType.VarChar, 50, "Password")14 sqlcmd.Parameters("@Password").Value = txtPassword.Text15 16 sqlcmd.Parameters.Add("@Result", SqlDbType.Int, 4, sonuc)17 sqlcmd.Parameters("@Result").Direction = ParameterDirection.Output18 19 20 sqlcmd.ExecuteNonQuery()21 22 If (sonuc = 1) Then23 24 Response.Write("USER FOUND :)")25 'cookie is set with SESSION ID.26 Response.Cookies("User").Value = Session.SessionID27 Response.Cookies("user").Expires = DateTime.Now.AddMinutes(30)28 'Response.Redirect("Welcome.aspx")29 Else30 Response.Write("USER NOT FOUND :(")31 'Response.Redirect("invalid.aspx")32 33 End If
View 5 Replies View Related