I have SQL 2000 and need to retrieve fairly large amout of data (~
50.000 characters) in XML format and then insert it into the field of
the text type.
As 'FOR XML' can't be used with either local variables, INSERT INTO or
SELECT INTO this makes "XML support" quite useless in many aspects.
Can anyone please help me in solving this.
Thanks a lot for your help and time.
Pavel
hello
i have just created a test database and now need to insert a large number of records into one of the tables, we were thinking of about 1 million records, has anyone got an sql script that i could use to create these records
cheers
john
This is a general question on the best way to import a large amount of datato a MS-SQL DB.I can have the data in just about any format I need to, I just don't knowhow to import the data. I some experience with SQL but not much.There is about 1500 to 2000 lines of data. I am looking for the best way toget this amount of data in on a monthly basis.Any help is greatly thanked!!Mike Charney
View 5 Replies View RelatedI need to delete data from a particular table which has more than half a million records. The data needs to be deleted is more than 200,000 records from the table. What is the best way to delete the data from the table other than importing into a temporary table and performing the same operation?
Let me know if the strategy to be followed is okay.
1. Drop all the triggers
2. Drop all the indexes
3. Write a procedure with a loop setting ROWCOUNT to 1000 and delete the records. ( since if I try to delete all the rows it will give timeout error )
The above procedure will delete 1000 records for each batch inside the loop till it wipes out all the data for the specified condition.
4. Recreate Indexes and Triggers.
Please let me know if there are any other optimal solution.
Thanx,
Zombie
Hi,I am using SQL 2000 and has a table that contains more than 2 millionrows of data (and growing). Right now, I have encountered 2 problems:1) Sometimes, when I try to query against this table, I would get sqlcommand time out. Hence, I did more testing with Query Analyser and tofind out that the same queries would not always take about the sametime to be executed. Could anyone please tell me what would affect thespeed of the query and what is the most important thing among all thefactors? (I could think of the opened connections, server'sCPU/Memory...)2) I am not sure if 2 million rows is considered a lot or not, however,it start to take 5~10 seconds for me to finish some simple queries. Iam wondering what is the best practices to handle this amount of datawhile having a decent performance?Thank you,Charlie Chang[Charlies224@hotmail.com]
View 5 Replies View Relatedi need to retrieve a large amount of data from the sql server database and make changes to one field and put the data back using a console application. how do i do it?
View 3 Replies View RelatedHi,
My application needs to retrieve data from a table which has more than 15 lakh records. The records keep increasing in thousands every 15 days.
Is there anyway i can reduce the time to retrieve? basically i have a select statement with a few conditions and a clause for the id's of these records.
Hi Experts:
We have several database linked via merge replications. Due to business requirements, we need to delete 5M rows in one table, we did it on one subscriber. However, the publisher kept uploading the deletion operations from the subscriber and blocked any downloading operation from publisher to subscriber. How can we acceralte the replications now as this has already operated in 2 days, and will continue 1-2 days? Is it possible to set the publisher take the downloading before uploading? How to speed up large amount data deletion operations in replication environment?
Thanks in advance!
Ron
I have an interesting challenge. we are not allowed to allow users direct access to data in our SQL Server. Audit requires us to take the data out of our production server and pass it to the user. my situation is i have a table in SQl with over 100,000 records and growing. i want to pass that to an access data base. i am utilizing DTS and a data transform.
i s there a better way? the package is running slow and even appears to freeze. i see this amount of data as growing as well.
Don S
Recently we added a new table into our SQL2000 database specifically to store scanned in images of documents. This new table contains a PK field, a couple of datetime fields, a couple of char(1) fields and one 'image' field.
Before adding this table, the database size was approx 6GB. Six months after adding this new table, the database has grown to 18GB - 11GB of this is due to the scanned in images.
Would this new table affect the SQL performance with regards to accessing other data in the database that has nothing related to the new table?
If so, would moving this new table into it's own database be recommended?
Thanks
Rod
I have a combo box where users select the customer name and can eithergo to the customer's info or open a list of the customer's orders.The RowSource for the combo box was a simple pass-through query:SELECT DISTINCT [Customer ID], [Company Name], [contact name],City,Region FROM Customers ORDER BY Customers.[Company Name];This was working fine until a couple of weeks ago. Now wheneversomeone has the form open, this statement locks the entire Customerstable.I thought a pass-through query was read-only, so how does this do atable lock?I changed the code to an unbound rowsource that asks for input of thefirst few characters first, then uses this SQL statement as therowsource:SELECT [Customer ID], [Company Name], [contact name],City, Region Fromdbo_Customers WHERE [Company Name] like '" & txtInput & "*' ORDER BY[Company Name];This helps, but if someone types only one letter, it could still bepulling a few thousand records and cause a table lock.What is the best way to populate a large combo box? I have too muchdata for the ADODB recordset to use the .AddItem methodI was trying to figure out how to use an ADODB connection, so that Ican make it read-only to eliminate the locking, but I'm striking outon my own.Any ideas would be appreciated.Roy(Using Access 2003 MDB with SQL Server 2000 back end)
View 2 Replies View Relatedguys,I have a project need to move more than 100,000 records from onedatabase table to another database table every week. Currently, usersinput date range from web UI, my store procedure will take those dateranges to INSERT records to a table in another database, then deletethe records, but it will take really long time to finish this action(up to 1 or 2 hours).My question is if there is some other way I should do to speed up theaction, I am thinking about use bcp to copy those records to datafileand then use bcp to insert it into SQL Server table. Is this the rightway to do it or should I consider other solution (then, what is thesolution.)Thanks a lot!
View 8 Replies View RelatedWe have created a databse in SQL Server 7 for support issues.
We are having trouble with only one aspect of the databse and that is the body of the supported problem.
The databse is basically a Question/Answer Support database whch house Frequently Asked Questions.
When the user does a search on a specific problem they have a list of matching questions shows on the screen (links).
When the question is clicked on it shows the Questions with the Answer of possible fixes.
Our problem lies in the fact that SQL server is truncating the Answer portion. I have tried different Data Types with maximum lengths with no success it keeps truncating it.
Right now I am on Data Type nvarchar with a length of 4000.
If anyone has any pointers on how to solve this problem all input is appreciated. You can post here to the forum or e-mail me directly at jason@flnet.com
Thank You.
-JR
Hello,I have experienced that some of my tables occupies an extremely large amountof pages but with few rows. An example is a table with 37 rows over 22000pages !. The columns are simple integer and char. I fixed the problem byintroducing a clustered index. Now it only uses 1 page. But can anyoneexplain this behaviour in SQLServer 2000 ?regards Jakob Mathiasen
View 4 Replies View RelatedIs there any way how to create indexies after insertion of any
number of records (I dont want to create index after insertion of every record,
but for example after insertion of 1000 records) ?
I heard it should be possible with „bulk insert“ or with
transactions. Is it right ? I need do this with MS SQL Server 2005 (Workgroup
edition).
Thank you for your ideas!
Jan
What datatype to use when inserted large amount of Text ??
View 6 Replies View RelatedI have a large amout of dbs (150) on my SQL Server and when using the enterprise manager to do administrational tasks like Backup, Restore etc. it takes 1.5 hour to open the Database folder. Server is 2xP4, 3Gb RAM. Any ideas on how to manage this number of dbs on the same server and instance of SQL.
Cheers!
I have been in contact with my Hosting provider who have told me that my website seems to be making a large amount of SQL commands, and locking the tables.
View 3 Replies View RelatedHello all - I currently have a project that has a gridview on the front end. The user can select multiple items from this grid, hit a button and all of the selected records should be updated in the process. However, this resultset can have a large amount of data coming back, and I'm stumped on how to pass all of the ID's to the sp. I'd rather not call the SP for each record selected, as there could be 1,000 items selected, and well, I'd rather not call the SP 1000 times :p. I thought of generating a comma delimited list as I'm looping through the grid and using dynamic sql, but the IDs are about 6-7 numbers long, and including comma, would take up almost all of the max space in a varchar.
Are there any good solutions to this problem? Passing the items as an array? Generating a data table in .NET and passing that?
Any help would be appreciated.
-Jaime
How can I make a recursive algorithm in TSQL without using a large amount of resources?
New hires are put on a 6 month probation period, Their probation ends at the 6 month mark + sick time isnull(floor(sick_hours/8),0) they accrued during that 6 months. Their accrued sick days are added to the 6 month probation period to establish a new probation end date.
I then have to do the following loop:
1)Determine if any of the days between the original probation end date and the new probation end date have any weekend days or holidays for a particular employee.
2)If it does, I add those days to the new probation end date to create a newer probation end date.
a.I then go back up to step 1).
3)If it does not, I jump out of loop and look at the next employee on probation.
Note: I already have coding for determining number of sick days accumulated during an employee’s probation period. Recursive CTE? Recursive function? Other?
A friend reminded me of a problem we tried to solve a few years ago and were unsuccessful. Below is a copy of the email he sent me. We would very much appreciate any ideas from the community. Thanks!Lets start with a simple schema where you have 4
tables:
I am having a small problem.
When I generate a report with a large amount of text data (Paragraphs) the report will not split the text between two pages.
It will move the entire text box to the next page leaving a large amount of space on the previous page.
I tried every control on the page to render this. I tried textboxes, tables, lists, rectangles, subreports, etc..
The data is stored in a SQL table using a text data type (there can be a large amount of data entered into these database.
Any help on this would be great. I like reporting services, but there are just a few bugs.
I am using Reporting Services 2000 with Service Pack 2 and Hotfix
http://support.microsoft.com/?kbid=912424 (That fixed a different PDF rendering issue) and this problem was occuring prior to this hotfix.
Thanks in advance
Hi every one,
I am facing problem in printing the reports from browser and also when i export it to pdf,the problem i am facing is blank pages are coming when report column getting the large amount of text around 2500 characters into column value.
can any one help me in this issue?. if the report is getting acceptable amout of data it is printing in proper way i.e no balnk pages at all.i maintained all properties like margins+body size < page size.
Please help!!!
I'm building a database that I have a form. This form allows user input the invoice amount field which is the currency field. My ultimate goal is allow user put in the postive numbers and it will store as negative amount. Please let me know if there is the way to do that.
Thanks in advance.
Linh
Hi ,
How to INsert and Update Large Amount of Records (4 Lacs) into Destination Table Through Business Intelligence Studio Using SSIS Pacakge .How to Achieve this .i tryed with left outer join & conditional split but the problem its not able to insert & update records simultaneously . can any one give me a sample .
Thanks & Regards
Jeyakumar.M
I have doubt In ssrs while doing report like If We have Amount Column In a Table, then I want to display amount in letters Format.
Ex: 5000 /- Now I want to display Amount As Five Thousand Rupees Only.
In the full recovery model, if i run a transaction that inserts 10MB of data into a table, then 10 MB of data is moved in the data file. Does this mean then that the log file will grow by exactly 10MB as well?
I understand that all transactions are logged to the log file to enable rollback and point in time recovery, but what is actually physically stored in the log file for this transactions record? Is it the text of the command from the transaction or the actual physical data from that transaction?
I ask because say if I have two drives, one with 5MB/s write speed for the log file and one with 10MB/s write speed for the data file, if I start trying to insert 10 MB of data per second into the table, am I going to be limited to 5MB/s by the log file drive, or is SQL server not going to try and log all 10 MB each second to the log file?
Hy im PCV
I want to know how to calculate the amount of data(in MB) that is transfered from 1 server trought another
Puplisher--->Subscriber, using a merge replication. I know that the amount of data depends on the number of the rows and the scale of the colums. I only want to know how to calculate that amount of data. I am using Sql server 2000, and a OS windows XP profesional, thank you
PCV
I'm creating a temporary table in a Sql 2005 stored procedure that contains the transaction amount entered in a period <= the period the user enters.
I can return that amount in my result set. But I also need to separate out by account the amounts just in the period = the period the user enters. There can be many entries or no entries in any period. I populate the temporary table this way:
SELECT
t.gl7accountsid,
a.accountnumber,
a.description,
a.category,
t.POSTDATE,
t.poststatus,
t.TRANSACTIONTYPE,
t.AMOUNT,
case
when t.transactiontype=2 then amount * (-1)
else amount
end as transamount,
t.ENCUMBRANCESTATUS,
t.gl7fiscalperiodsid
FROM
UrsinusCollege.dbo.gl7accounts a
join
ursinuscollege.dbo.gl7transactions t on
a.gl7accountsid=t.gl7accountsid
where
(t.gl7fiscalperiodsid >= 97
And
t.gl7fiscalperiodsid<=@FiscalPeriod_identifier)
And poststatus in (2,3)
and left(a.accountnumber,5) between '2-110' and '2-999'
And right(a.accountnumber,4) > 7149
And not(right(a.accountnumber,4)) in ('7171','7897')
order by a.accountnumber
Later I create a temporary table that contains budget information. I join these 2 temporary tables to produce my result set. But I don't know how to get the information for just one period. For example, if the user enters 99 as the FiscalPeriod_identifier, I need a separate field that contains only those amounts(if any) that were entered for each account in Period 99.
Can anyone help? It may be that I am not seeing the forest for the trees, but I can't figure it out.
Thanks very much.
Sue
Hi,I've an application, lets call it simply "A", which creates in a Microsoft Sql Database two huge tables.Lets call them "table1" and "table2"It safes really much data into this tables.After application "A" has finished another application is executed which deletes this two tables.Then application "A" is started again and it will create this two tables again, but the amount of data becomes bigger.It can only proceed if the tables were deleted completely before and the database is empty. This is the procedure which I repeat very often, but everytime the amount of data becomes bigger (table1 and table2 becomes bigger).A couple if times it works fine, but once it seems data becomes too big and application "A" fails. Mostlikely because the data wasnt removed correctly / completely. This is my code of deleting the two tables, maybee there is something I have to change:</p><p> try { SqlConnectionStringBuilder builder = new SqlConnectionStringBuilder("Server=mycomputerdbname;Integrated Security=SSPI;" + "Initial Catalog=testing"); builder["Server"] = "(local)dbname"; builder["Connect Timeout"] = 10; builder["Trusted_Connection"] = true; builder["Initial Catalog"] = ((ComponentConfiguration)this.componentConfig).Persistency.DatabaseName; SqlConnection sqlconnection = new SqlConnection(); sqlconnection.ConnectionString = builder.ConnectionString; sqlconnection.Open(); SqlCommand cmd1 = new SqlCommand("DROP TABLE table1"); // TO Do delete all tables SqlCommand cmd2 = new SqlCommand("DROP TABLE table2"); // TO Do delete all tables cmd1.Connection = sqlconnection; cmd2.Connection = sqlconnection; cmd1.ExecuteNonQuery(); Thread.Sleep(7000); cmd2.ExecuteNonQuery(); Thread.Sleep(7000); sqlconnection.Close(); Thread.Sleep(3000); } catch { }</p><p> </p><p> Thanks for help! mulata
View 6 Replies View RelatedGenerally, on any screen, we design filter screen by allowing user to identify range or one value to search.
But sometime in some screen, It will be more convenient for user if user can identify No matter how value to search.
For example
On screen which have information of people in any province.
So user would like to search it by identify no matter how value to search.
There are check box of any province on filter part which enable users choose it.
Hence, if sometime user choose (by clicking on checkbox) 3 provinces : LA, Michigan, WachingtonDC to see description only 3 chosen province.
and sometime user choose (by clicking on checkbox) 2 provinces : LA, Michigan to see description only 2 chosen provinces.
Please give me any idea for create Stored Procedure or any tecnique to complete my idea....
Help me Pleaseeeee
I need to make a job that will update up to 8000 rows with the list description of 'berkhold' to 'berknew' in SQL 2000. This is something that I have to do with several projects manually every day by doing the following 2 steps.
SELECT ListDescription, CRRecordID
FROM dbo_BerkleyGroupInventory
WHERE ListDescription ="BerkHold" AND CRCallDateTime<'1/1/2003' AND CRCallResultCode ='CC'
ORDER BY CRRecordID
I then scroll to the 8000th row and copy the CrrecordID and run the following query
UPDATE dbo.berkleygroupinventory
SET listdescription ='berknew'
WHERE ListDescription ='BerkHold' AND CRRecordID <=5968432 AND CRCallDateTime ='1/1/2003' AND CRCallResultCode='CC'
I'm sure there's an easier way to do this, but I'm very new to SQL and haven't figured it out yet
Dear,
I created a package getting data from files and database sources, doing some transformations, retrieving dimension id's and then inserting it into a fact table.
Running this package with a limited amount of data (about a couple of 100.000 records) does not result in any errors and everything goes fine.
Now running the same package (still in debug mode) with more data (about 2.000.000 rows) doesn't result in any errors as well, but it just stops running. In fact, it doesn't really stop, but it doesn't continue as well. If I've only been waiting for some minutes or hours, I could think it's still processing, but I waited for about a day and it still is 'processing' the same step.
Any ideas on how to dig further into this in order to find the problem? Or is this a known problem?
Thanks for your ideas,
Jievie