How To Run Reporting Service In MS-Access Environment?
Aug 6, 2007
Hi
Please someone tell me, is it possbile to run Reporting service in MS-Access environment?
I mean to say i have to use MS-Access as user interface to design and generate report
(instead of Visual studio IDE) and the Sql server 2005 should be Report Server.
If it is possible then how can i implement it.
Thanks and Regards
Altaf Nizamuddin
View 4 Replies
ADVERTISEMENT
Feb 27, 2007
Hi,
Please let me know if the following server configuration is possible?
SQL Server Database Services on machine #1
Analysis Services and Reporting Services 2005 on machine #2 (without SQL Server Database Services)
Post installation, need to setup Reporting services configuration. In that, within Database Setup, point to database installed on machine #1.
I am facing problem in pointing to remote database.
Awaiting some reply.
Thanks!
View 3 Replies
View Related
Apr 24, 2007
I am running SQL Express with Reporting Services 2005 SP2.
Installed both on with the NT-AuthorityNetwork Service
I uploaded a report and I can execute it in the Report Manager.
What I want to do is execute the report via Webservice and stream the result as PDF.
Code SnippetReporting.ReportExecutionService svc = new Reporting.ReportExecutionService();
svc.Credentials = System.Net.CredentialCache.DefaultCredentials;
svc.LoadReport(report, historyID);
svc.SetExecutionParameters(parameters, "en-us");
byte[] results = svc.Render(format,deviceInfor,out fileNameExtension,out mimeType,out encoding,out warnings,out streams);
this.Response.Clear();
this.Response.ContentType = "application/pdf";
this.Response.AddHeader("Content-disposition", "attachment; filename=Report.pdf");
this.Response.BinaryWrite(results);
this.Response.End();
this is my code in the asp.net page
and I get following exception
System.Web.Services.Protocols.SoapException: The permissions granted to user 'NT-AUTORITÄTNETZWERKDIENST' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'NT-AUTORITÄTNETZWERKDIENST' are insufficient for performing this operation.
at Microsoft.ReportingServices.Library.RSService._GetReportParameterDefinitionFromCatalog(CatalogItemContext reportContext, String historyID, Boolean forRendering, Guid& reportID, Int32& executionOption, String& savedParametersXml, ReportSnapshot& compiledDefinition, ReportSnapshot& snapshotData, Guid& linkID, DateTime& historyOrSnapshotDate, Byte[]& secDesc)
at Microsoft.ReportingServices.Library.GetDataForExecutionAction._GetDataForExecution(CatalogItemContext reportContext, ClientRequest session, String historyID, DataSourcePromptCollection& prompts, ExecutionSettingEnum& execSetting, DateTime& snapshotExecutionDate, ReportSnapshot& snapshotData, Int32& pageCount, Boolean& hasDocMap, PageSettings& reportPageSettings)
at Microsoft.ReportingServices.Library.GetDataForExecutionAction.ExecuteStep(CatalogItemContext reportContext, ClientRequest session, DataSourcePromptCollection& prompts, ExecutionSettingEnum& execSetting, DateTime& executionDateTime, ReportSnapshot& snapshotData, Int32& pageCount, Boolean& hasDocMap, PageSettings& reportPageSettings)
at Microsoft.ReportingServices.Library.CreateNewSessionAction.Save()
at Microsoft.ReportingServices.WebServer.ReportExecution2005Impl.LoadReport(String Report, String HistoryID, ExecutionInfo& executionInfo)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WebServer.ReportExecution2005Impl.LoadReport(String Report, String HistoryID, ExecutionInfo& executionInfo)
at Microsoft.ReportingServices.WebServer.ReportExecutionService.LoadReport(String Report, String HistoryID, ExecutionInfo& executionInfo)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: The permissions granted to user 'NT-AUTORITÄTNETZWERKDIENST' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'NT-AUTORITÄTNETZWERKDIENST' are insufficient for performing this operation.
at Microsoft.ReportingServices.Library.RSService._GetReportParameterDefinitionFromCatalog(CatalogItemContext reportContext, String historyID, Boolean forRendering, Guid& reportID, Int32& executionOption, String& savedParametersXml, ReportSnapshot& compiledDefinition, ReportSnapshot& snapshotData, Guid& linkID, DateTime& historyOrSnapshotDate, Byte[]& secDesc)
at Microsoft.ReportingServices.Library.GetDataForExecutionAction._GetDataForExecution(CatalogItemContext reportContext, ClientRequest session, String historyID, DataSourcePromptCollection& prompts, ExecutionSettingEnum& execSetting, DateTime& snapshotExecutionDate, ReportSnapshot& snapshotData, Int32& pageCount, Boolean& hasDocMap, PageSettings& reportPageSettings)
at Microsoft.ReportingServices.Library.GetDataForExecutionAction.ExecuteStep(CatalogItemContext reportContext, ClientRequest session, DataSourcePromptCollection& prompts, ExecutionSettingEnum& execSetting, DateTime& executionDateTime, ReportSnapshot& snapshotData, Int32& pageCount, Boolean& hasDocMap, PageSettings& reportPageSettings)
at Microsoft.ReportingServices.Library.CreateNewSessionAction.Save()
at Microsoft.ReportingServices.WebServer.ReportExecution2005Impl.LoadReport(String Report, String HistoryID, ExecutionInfo& executionInfo)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WebServer.ReportExecution2005Impl.LoadReport(String Report, String HistoryID, ExecutionInfo& executionInfo)
at Microsoft.ReportingServices.WebServer.ReportExecutionService.LoadReport(String Report, String HistoryID, ExecutionInfo& executionInfo)
Source Error:
Line 206: [return: System.Xml.Serialization.XmlElementAttribute("executionInfo")]
Line 207: public ExecutionInfo LoadReport(string Report, string HistoryID) {
Line 208: object[] results = this.Invoke("LoadReport", new object[] {
Line 209: Report,
Line 210: HistoryID});
Source File: c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eporttest8a8d2a7956046022App_WebReferences.x8k9hsoj.0.cs Line: 208
Stack Trace:
[SoapException: System.Web.Services.Protocols.SoapException: The permissions granted to user 'NT-AUTORITÄTNETZWERKDIENST' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'NT-AUTORITÄTNETZWERKDIENST' are insufficient for performing this operation.
at Microsoft.ReportingServices.Library.RSService._GetReportParameterDefinitionFromCatalog(CatalogItemContext reportContext, String historyID, Boolean forRendering, Guid& reportID, Int32& executionOption, String& savedParametersXml, ReportSnapshot& compiledDefinition, ReportSnapshot& snapshotData, Guid& linkID, DateTime& historyOrSnapshotDate, Byte[]& secDesc)
at Microsoft.ReportingServices.Library.GetDataForExecutionAction._GetDataForExecution(CatalogItemContext reportContext, ClientRequest session, String historyID, DataSourcePromptCollection& prompts, ExecutionSettingEnum& execSetting, DateTime& snapshotExecutionDate, ReportSnapshot& snapshotData, Int32& pageCount, Boolean& hasDocMap, PageSettings& reportPageSettings)
at Microsoft.ReportingServices.Library.GetDataForExecutionAction.ExecuteStep(CatalogItemContext reportContext, ClientRequest session, DataSourcePromptCollection& prompts, ExecutionSettingEnum& execSetting, DateTime& executionDateTime, ReportSnapshot& snapshotData, Int32& pageCount, Boolean& hasDocMap, PageSettings& reportPageSettings)
at Microsoft.ReportingServices.Library.CreateNewSessionAction.Save()
at Microsoft.ReportingServices.WebServer.ReportExecution2005Impl.LoadReport(String Report, String HistoryID, ExecutionInfo& executionInfo)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WebServer.ReportExecution2005Impl.LoadReport(String Report, String HistoryID, ExecutionInfo& executionInfo)
at Microsoft.ReportingServices.WebServer.ReportExecutionService.LoadReport(String Report, String HistoryID, ExecutionInfo& executionInfo)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +533462
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +204
Reporting.ReportExecutionService.LoadReport(String Report, String HistoryID) in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eporttest8a8d2a7956046022App_WebReferences.x8k9hsoj.0.cs:208
_Default.RenderReport(String client_short, String gobj_long, String event_date, String event_time) in c:WebsitesReportTestDefault.aspx.cs:68
_Default.Button1_Click(Object sender, EventArgs e) in c:WebsitesReportTestDefault.aspx.cs:22
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Looks like I need some additional adjustment on the authentication. But I do not know where and how.
I try to change the webservice identity but after changing the user identity of the application pool in iis ( I think this is the only way to change webservice identity) I got the error message service unavailable in IIS. With this I also couldn't start the webfront end any more. Switching back to NT-AuthorityNetwork Serive the web front end worked again.
I tryed to add
Code Snippet<identity impersonate="true" />
to the web config and I get the same Error on the webserver account...
It would be great if someone could help me to adjust the settings...
View 1 Replies
View Related
Jan 28, 2008
Hi,
I have report that in access 97. When i run that report every morning, it's update technician time, mileage and money. I want that report to be update every min like real time report in sql reporting service.
The main thing i want to know is how to import report from access 97 to sql reporting service. I am not really familiar with reporting services in sql, can you be little more specific where to set up time?
The report only update when i run query every morning. Queries and Tables are in access 97. When i tried to migrate tables with ssma, i wan not able to convert all of the query.
Thanks.
View 3 Replies
View Related
May 16, 2008
i have a list report
some values of this are blank or null
i want to avoid that spacing if it is null
like
name:jjj
lastname kkk
firstname
address uuuu
i want it should be
name jjj
lastname kkk
address uuuu
View 3 Replies
View Related
May 9, 2008
We usually wait until a service pack has been released for a product like SQL Server before using it in production. Is this over cautious or the norm?
Thanks
Danny
View 5 Replies
View Related
Jul 20, 2005
I got a big Access file (1 400 tables) to convert to SQL and I wouldlike to be provided with some automated tools, except upsizing wizardand DTS, to convert it on my own.I got a lot of forms and query to convert too.Can someday provide me with at least one tool name ?Thanks,Guy
View 12 Replies
View Related
Nov 12, 2007
I have a problem at the company I work for. For historic reasons many developers and users know the sa passwords for SQL. Obviously this is not a good situtation to be in. Now the obvious answer it to just change this but for reasons unknown to sanity half of our applications are hardcoded to use sa passwords.
Now as a DBA coming into this this puts me in a tricky position as its impossible for me to control who is doing what etc. Is it possible to put triggers or something to monitor logins which will deny access to anyone accessing via the sa password not through an application. Ie if an application calls then the sa will have to be allowed but if a user using Query Analyser for example tries to use sa then they are denied access ?
Long term all these passwords are going to change but it the short term I still need to create some control on the system. Anyone have any thoughts ?
Si
View 3 Replies
View Related
Nov 12, 2015
I've been charged with architecting a new SSRS solution for our environment. We're mainly a .NET shop which works with an Oracle Database Server. Our developers want to start using SSRS for report creation and I'm not sure what is the best approach when it comes to this. Normally most of our environments have 3 separate servers, each one is DEV, QA and Prod. With SSRS however, i know that you can create multiple folders each with its own datasource connection, so i wonder if it would be better to just have one server were the developers develop their reports and then move them into a 'production' folder. (Any particular downsides to this approach?)
Also, are there considerations to be taken say, to tune Production SSRS vs a development SSRS or is that not really an issue? Besides that any other resources or tips for implementing SSRS for the first time, we're not going to do much with the actual databases to start we're just going to connect to our main Oracle database.
View 2 Replies
View Related
Jul 2, 2007
Is there a development environment for Reporting Services (2005) that is integrated with source control?
You can use Visual Studio to develop reports and place them under source control. But as far as I can tell, you cannot implement security, scheduling, etc. through Visual Studio. For these you can use a second environment, e.g. SQL Server Management Studio - but is this environment integrated with TFS?
In other words, is there a single development environment, integrated with TFS, where you can develop all aspects of Reporting Services reports?
View 1 Replies
View Related
Mar 27, 2006
We are using the whole BI-package from Microsoft - from SQL, DTS-package,Raporting Service and Analyze Service.
It should be very helpful to be able to create a metadata databases where you could find all releations between different objects (tables,views,reports,cubes,DTS-package,Databases.
Just to get answer for: 'where is view xxx used', 'what are Report xxx depending upon'.
While everything exists in different SQL databases it should possible to do.
Has anyone any comments or the same needs ?
View 1 Replies
View Related
Mar 31, 2006
Hello,
In our project, we would like to use the same data source for our analysis service database cubes and for our reporting service reports.
I created the analysis service project first, deployed successfully. When trying to setting up the data source in the report model project, I selected the "create a data source based on another object", and then selected the "create a data source based on an analysis service project". However, there is no analysis service project to select, and no browse button to see where the reporting service is looking for analysis service project either.
I have tried creating a new analysis service project with data source views, cubes, dimensions and all the stuff, but still cannot see the analysis service project in the drop down box to be selected for my reporting model project data source.
As I am fairly new to the reporting service, I'm sure I'm missing something, but couldn't find much information in the help or on the web. Any suggestion would be much appreciated.
Thank you very much,
Annie
View 5 Replies
View Related
Aug 17, 2015
I am setting up sharepoint and sql server integration environment. I am considering the following topology: PowerPivot for SharePoint 2013 and Reporting Services in SharePoint mode Two Server Deployment
[URL]
I am looking to follow the topology example by the letter, which involves installing PowerPivot for SharePoint (aka SSAS in SharePoint mode) in the same server as my SQL, and installing SSRS in SharePoint (SP) integrated mode in the same server as SharePoint.
I understand, however, that if I wanted to install SSRS in SP mode in the same server as SQL, I could but only if the server contains the SP Object Model.
My first question is, what would involve having the SP Object Model in the SQL Server?
Would only installing SP binaries be enough; or Do I need to do a minimal install of SP in the SQL server enough for it to joing the SP farm? And most importantly, what would be the licensing implications for SP in case I want proceed down this route and have SSRS in SharePoint mode installed in the same server as the SQL?
View 4 Replies
View Related
May 14, 2008
Hi all,
I have some problem about reporting service add-in.
After I install reporting service add-in for SharePoint, reporting service menu does not appear in Application Management Tab in SharePoint Central Administration.
I try to uninstall and re-install again, it remain not work.
How can I solve this problem?
Thank you very much.
View 4 Replies
View Related
Nov 16, 2005
I have finished a change request from our client. I need to update clients' database with the one in developments.Here is the changes i made to database:Added/Changed some tablesAdded/Changed some stored proceduresAdded data to some dictionary tableThe data in clients' current database MUST be kept. So how can I merge the changed information to clients' database?
View 3 Replies
View Related
Sep 4, 2007
Hi,
Can we pass the Database name/Catalog name for the datasouce that will be used for report,
as a report parameter . Is yes can any one help me on how to achieve that .
Thanks in Advance
View 1 Replies
View Related
Mar 28, 2007
Hi,
I am using SQL Server 2005 Reporting Services. I want to make it secure. I am also using WCF services and made them secure using Claim based System.Identity Model.
I want to apply same claim based model to Reporting Services.
How can I do that?
Amit
View 2 Replies
View Related
Mar 12, 2007
Hi There,
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
Thanks.
View 3 Replies
View Related
Sep 10, 2015
Is there any way to get more information for when IAuthorizationExtension::CheckAccess fails to grant access to a report item for the current user? Specifically, it would be useful to know:
1. URL of attempted report
2. IP address of user agent
3. Identity of current user
4. Date/Time of the failed attempt
ssrs2014
View 7 Replies
View Related
May 8, 2015
I started my Reporting Server and if I use the Internet Explorer as a Administrator everything works fine.But if I don't open it as an admin it calls "rsAccess Denied The user [...] does not have the permission...".Problem is that I want to run it in an SAP Program with an HTML Viewer. how I can get those Permissions ?By the way somehow I'm not able to create or change roles in the Microsoft SQL Server Management Studio.
View 5 Replies
View Related
Oct 17, 2006
Hi there,
I have a problem accessing web service using Web service Task.
I set up the task and can see methods available, but the result of execution is only that:
<Result>The result is null. Either the result is null or the Web method returns void.</Result>
I can connect and get data using C# application. The difference is that I use a token in connection there.
What should I do with Web Service Task to fix it?
Thanks in advance.
View 3 Replies
View Related
Sep 3, 2007
Hello sir
I am using SQL Reporting Service in SQL Server 2005
There I am creating a Report from Parameterised Stored Procedure
Its show the report after clicking on Button View
but it not sort a data according to parameter
Please help me out in this
Thanks
Ever Smiling
Ashish
You Have to Loss Many Times to Win Single Time
View 2 Replies
View Related
Nov 23, 2005
let's work together
View 1 Replies
View Related
Feb 8, 2008
How to deploy the newly created report on the Reprt Server
View 3 Replies
View Related
Feb 9, 2006
Hi all,
I am new to reporting services.
I have to call the reporting service(some else did this) from the web application that I have created using VB.NET . Not sure how to do it .. was reading few articles on the web .
Any good atricles out there ?
I have created web reference to http://server/ReportServer/ReportService.asmx in my web app. The report expects one parameter .
Below is the code I was starting to write to call the reporting service
Dim rs As New RSWebReference.ReportingService
rs.Credentials = System.Net.CredentialCache.DefaultCredentials
Dim result As Byte
Dim encoding As String
Dim mimetype As String
Dim parameters(2) As Parametervalue()
For some reason I cannot do ParameterValue() it says undefined. I am using Microsoft .NET Framework 1.1 . do I have to use ASP.net2.0 for using reporting services?
ANy way i can get this working
Thanks in advance.
View 2 Replies
View Related
Feb 1, 2007
We are planning on using 2005 report services. Im wondering how I can feed reports to my asp.net web application that resides on a different machine.
The scenario is:
user -> IIS web app -> report on sql
I guess the real question at this point for me, is if I have reports - can I have them cached in pdf format and then how are they accessed with a url ?
View 3 Replies
View Related
Aug 14, 2007
We have a billing web service where you passs in the account and amount and get returned an XML string with result.
I had suggested that I open up an endpoint and have the service listen for messages but the programming team wont go for it.
What is the best method for me to call an external web service? I have tried sp_OACreate and run into memory leaks and have not had much luck with assemblies. See http://www.codeproject.com/script/comments/forums.asp?forumid=1725&select=2180035&df=100&msg=2180035
View 1 Replies
View Related
Apr 17, 2008
I have already Installed SQL Server management studio express edition in my computer. Now I want to install SQL reporting service.
Can anyone please guide me to how to do that.
Thanks
Kalloo
View 1 Replies
View Related
May 14, 2004
Hi all
When I'm installing sql reporting service I get an error that says "ASP.NET is not installed or is not registered with your web server."
I have iis installed, all of .net, and just installed .NET Framework Redist version 1.1
Can anyone tell me what I need to do to register ASP.NET or what I've done wrong.
Thanks for your help
Jerry
View 3 Replies
View Related
Apr 5, 2008
CAN ANYONE HELP ME OUT.
I have Generated a report using Tamil in reporting services in sql server 2005... i can able to generate and preview the report in local system,
But when i deployed in report manager server, the generated report
statement font's overlapping with others, even after alignment..
hope am clear...
pls gve the solution....
View 1 Replies
View Related
Jun 11, 2008
I want to make a table with dataset such as
employee
and in the header of the table i want to put
another table which has another dataset such as
empdata
Could you please help me
View 1 Replies
View Related
Jun 28, 2007
Hello all experts!
I have a problem I would be very happy if someone could help me out with;
I have a windows 2003 server with SQLExpress and Reporting Services.
I have developed a report in visual studio and successfully deployed that report to the server. I can browse http://localhost/reports to access the report and view them (Via terminal server). But when I browse the page from outside I recieve the following error;
"The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version."
If I run from VisualStudio 2005 and try to access the page I get this message;
"The request failed with HTTP status 401"
What is Wrong??
Thanks in advance for any good suggestion.
best regards
Nroblex from sweden
View 3 Replies
View Related
Sep 17, 2007
Hi there
I've created Report Parameter called AssetCode. In quiry for database, I've created like this:
SELECT a.id1, a.deliverydate, a.retirementdate, b.organisationname, c.costcentre,a.id4,mm.hierarchydescription
FROM Asset as a (NOLOCK)
LEFT JOIN makemodel as mm (NOLOCK) ON a.makemodelid = mm.makemodelid
LEFT JOIN OrganisationTree as b (NOLOCK) ON a.physicalLocationOrgID = b.orgid
LEFT JOIN AssetChargeSplit as c (NOLOCK) ON a.assetid = c.assetid
WHERE a.status = '2'
AND a.id1 LIKE @AssetCode
AND (mm.assettype = 1 or mm.assettype = 6)
ORDER BY a.id1 ASC,
c.costcentre DESC
But when you run a report, if you put for instance "NA196" as keyword, it doesn't return the data for "NA1961", "NA19602", "NA1965", etc etc. But if you put in textfield such as "NA196%", it get the data. ?!?! So how do replace this behaviour?
Thanks
View 3 Replies
View Related