How To Run A Loop For All Columns In Script Component Input Column Collection For Each Row
Jan 22, 2008
Hi All,
I want to run a loop for all the input columns in the script component. My requirement is, I have nearly 50 columns in the input columns list. For each row and for each column I need to do some operation. How Can I run a loop for each column. Please note in the script component I need to get the column names in the middle for some operations. Please see below.
Process Each Input Row
For each column in Input column list
....
....
If column.Name Starts with "Test" then set NULL to the column value
....
....
End Loop
End Loop for each input row
Can anybody tell me how can I do that.
Regards
Venkat.
View 5 Replies
ADVERTISEMENT
May 28, 2007
I did make the SQLServer 2005 tutorial, but the LokUp point I see an error "This component has no available input columns". How I can to solve this?
View 6 Replies
View Related
Nov 26, 2007
I'm trying write a reusable script component that takes data from rows that were rejected from a SQL Destination operation and put them into a common SQL error table.
This script would basically function to take the input columns selected in the script, and build a delimited string, (similar to the 'Flat File Source Error Output' that is contains redirected rows from reading a flat file) and insert this string into a SQL table called 'SourceData' to store errors.
I'm trying to script the component to iterate through all input columns (as selected in the input columns screen) and build a simple string.
Code Block
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
'Use the incoming error number as a parameter to GetErrorDescription
Row.ErrorDescription = ComponentMetaData.GetErrorDescription(Row.ErrorCode)
Try
Row.ErrorColumnName = ComponentMetaData.InputCollection(0).InputColumnCollection(Row.ErrorColumn).Name
Catch ex As Exception
Row.ErrorColumnName = String.Concat("Column Name retrieval failure. Details", ex.Message)
End Try
'
'Build input data
'
Dim inData As String
For Each inputCol As IDTSInputColumn90 In ComponentMetaData.InputCollection(0).InputColumnCollection
inData = String.Concat(inData, "~", inputCol.Name) 'I don't want the name, but the value.
Next
Row.SourceData = inData
'
End Sub
I've only got as far as iterating the names of columns in the input buffer, but how do i get the values?
The result i'm trying to achieve is :
Selected columns in 'Input Column' screen : Name, Address, Phone
OutPut column 'SourceData' value : Harry~Melbourne~None
I don't want to write the code as:
Code Block
inData = Row.Name
indata = String.Concat(inData,"~",Row.Address)
indata = string.concat(inData,"~",Row.Phone)
as this make my code not very reusable. I've got some tables which are 100+ columns long and I don't wish modify the code too much
I have also tried overriding the ProcessInput() function of the script component to iterate through the buffer columns :
Code Block
Public Overrides Sub ProcessInput(ByVal InputID As Integer, ByVal Buffer As Microsoft.SqlServer.Dts.Pipeline.PipelineBuffer)
MyBase.ProcessInput(InputID, Buffer)
Dim iCnt As Integer = 0
Dim inData As String
If Buffer.ColumnCount > 0 Then
For iCnt = 0 To Buffer.ColumnCount - 1
inData = String.Concat(Buffer.Item(iCnt)) 'Error thrown here: PipelineBuffer has encountered an invalid row index value.
Next
End If
End Sub
but i get an error when i run it.
Please help.
View 18 Replies
View Related
Aug 28, 2007
I'm trying to create a fairly simple custom transform component (because I've read that's the easiest one to create) which will take one column from a flat file source and based on the first row create the output columns.
I'm actually trying to write a component that will solve the now well known problem with parsing CSV files in SSIS. I have a lot of source files and all have many columns so a component that can read in the first line from the CSV file and create the output columns automatically will save me lots of time when migrating the old DTS packages.
I have the basic component set up but I'm stuck when trying to override the OnInputPathAttached method because I don't know how to use the inputID to get the first line from the input (the buffer).
Are there any good examples for creating output columns dynamically based on the input buffer?
Should I just give up on on the transform and create a custom source component instead?
View 5 Replies
View Related
Jul 22, 2007
Hi,
I have a script component and under input columns, I checked one of the fields I want to use inside the script. It's under the Input 0 in the hierarchical tree inside the inputs and outputs.
How do i use this inside the script?
cherriesh
View 3 Replies
View Related
Apr 17, 2007
Hello,
I have a SSIS package with a Data Flow task. This task transfers the data from SQL Server 2000 to a table in SQL Server 2005.
I deployed and tested this package on the Test Server. Then put this package in a job and executed it - Works fine.
On the production server- If I execute the package through DTEXECUI, it works fine. But when I try executing it through a job- the job fails and it gives me following error:
Description: The external metadata column collection is out of synchronization with the data source columns. The "external metadata column "T_FieldName" (82)" needs to be removed from the external metadata column collection....
What I don't understand is, why are there no errors displayed when I execute the package through DTEXECUI.
Can anyone help me to resolve this issue.
Thanks.
View 3 Replies
View Related
Feb 9, 2007
actuallu the earlier obviously worked but now i am fetching values from 2 colums and in collection we can pass 2 strings i did that.but then how to increment the collection c.will just post the code .
query fetching 2 records
can add only 1
NameValueCollection c = new NameValueCollection();
cmd2.CommandText="select Pname ,HoursWorked from TimeSheet1 ts , ProjResource pr,ProjectDetails pd where ts.rid = pr.rid and ts.pcode=pr.pcode and pd.Pcode = ts.Pcode and pr.Rid = '" + Ridtxt.Text + " '";
cmd2 .Connection = con1;
con1.Open();
SqlDataReader dr = cmd2.ExecuteReader();
while (dr.Read())
{
c.Add(dr["pname"].ToString(), dr["hoursworked"].ToString());
}
as earliar
supose c# 12
asp 11
only c# getting added
even though loop is while dr.read()
{
}
actually how to increment key as in c both strings are occupied
View 3 Replies
View Related
Jan 17, 2008
Hello, I am trying to configure a Script Component as a data source. Although this should be a simple exercise, I am running into a problem.
My control flow contains a Foreach Loop with a file iterator. The Directory Expression of the Foreach Loop Editor is supplied by an expression mapped to a package level variable called inputdirectory. The FileNameRetrieval Expression is mapped to a package scoped variable called filename.
My data flow is encapsulated by the Foreach Loop, and contains a Script Component as Source for the Data Flow Source, and a Flat File for the Data Flow Destination. The contents of the Script Designer are as follows:
Code Block
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Imports System.IO
Public Class ScriptMain
Inherits UserComponent
Dim thisFileDate As Date
Dim thisFileName As String
Dim thisFilePath As String
Public Overrides Sub CreateNewOutputRows()
thisFileName = ReadOnlyVariables("filename").Value.ToString()
thisFilePath = ReadOnlyVariables("inputdirectory").Value.ToString()
thisFileDate = File.GetCreationTime(thisFilePath & "" & thisFileName)
FileSpecBuffer.AddRow()
FileSpecBuffer.FileName = thisFileName
FileSpecBuffer.FullPath = thisFilePath & "" & thisFileName
FileSpecBuffer.CreateDate = thisFileDate
End Sub
End Class
When I debug the package, I get the following error:
The collection of variables locked for read access is not available at this point.
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponent.get_ReadOnlyVariables()
at ScriptComponent_67311120e6eb4162a3ea1f70847f04de.ScriptMain.CreateNewOutputRows()
at ScriptComponent_67311120e6eb4162a3ea1f70847f04de.UserComponent.PrimeOutput(Int32 Outputs, Int32[] OutputIDs, PipelineBuffer[] Buffers)
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers)
My googlefu fails me at reconciling this. I have read various posts about changing the line ReadOnlyVariables("filename").Value to ReadWriteVariables("filename").Value, and handling the buffer assignment in PostExecute. The problem is that all examples shown are either for Script Component as Destination or Script Component as Transformation. I have tried playing with the Custom Properties in the Script Commponent set the ReadOnlyVariables and ReadWriteVariables, using a PreExecute method, a PostExecute method, all with different errors returning. I'm at a loss here. Could anybody provide me with a simple working example so that I can correctly populate my output buffer in the context of Script Component as Source?
I fully understand that I could just run a Script Task Using System.IO.Directory, and System.IO.File, but I really want to make this package work in the manner I've described. Any help would be appreciated.
Thanks,
John T
View 5 Replies
View Related
Mar 27, 2008
Hi all. Can you help me? I'm trying to build a custom component that recieves two datasources (like for instance the union all) . I first started by adding a new IDTSInput90 in the ProvideComponentProperties, but when I tried to use the component I got an error that has very helpful :
===================================
The component could not be added to the Data Flow task.
Could not initialize the component. There is a potential problem in the ProvideComponentProperties method. (Microsoft Visual Studio)
===================================
Error at Data Flow Task [Replica Transformation [1289]]: System.Runtime.InteropServices.COMException (0xC0048004): Exception from HRESULT: 0xC0048004
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSOutputCollection90.get_Item(Object Index)
at MyCustomSSISComponent.SampleComponentComponent.ProvideComponentProperties()
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProvideComponentProperties(IDTSManagedComponentWrapper90 wrapper)
===================================
Exception from HRESULT: 0xC0048004 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HandleUserException(Exception e)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProvideComponentProperties(IDTSManagedComponentWrapper90 wrapper)
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ProvideComponentProperties()
at Microsoft.DataTransformationServices.Design.PipelineTaskDesigner.AddNewComponent(String clsid, Boolean throwOnError)
This is my ProvideComponentProperties:
Code Snippet
public override void ProvideComponentProperties()
{
RemoveAllInputsOutputsAndCustomProperties();
ComponentMetaData.UsesDispositions = true;
IDTSInput90 input = ComponentMetaData.InputCollection.New();
input.Name = "Staging Data";
input.ErrorRowDisposition = DTSRowDisposition.RD_FailComponent;
IDTSInput90 input2 = ComponentMetaData.InputCollection.New();
input2.Name = "Replica Data";
input2.ErrorRowDisposition = DTSRowDisposition.RD_FailComponent;
// Add the output
IDTSOutput90 output = ComponentMetaData.OutputCollection.New();
output.Name = "Replica Output";
output.SynchronousInputID = input.ID;
output.ExclusionGroup = 1;
// Add the error output
AddErrorOutput("StagingErrorOutput", input.ID, output.ExclusionGroup);
// Adds columns
AddXmlColumn();
IDTSOutputColumn90 column0 = ComponentMetaData.OutputCollection[1].OutputColumnCollection.New();
column0.Name = m_SyncStatusColumnName;
column0.SetDataTypeProperties(DataType.DT_STR, 1, 0, 0, 1252);
IDTSOutputColumn90 column1 = ComponentMetaData.OutputCollection[2].OutputColumnCollection.New();
column1.Name = m_AS400ImportedDateColumnName;
column1.SetDataTypeProperties(DataType.DT_DATE, 0, 0, 0, 0);
}
Since I'm new to SSIS I'm following Josh's SSIS Xmlify Data Flow Task sample.
Thanks.
View 3 Replies
View Related
Nov 16, 2005
All in the subject.
View 11 Replies
View Related
Aug 22, 2007
This is very similar to the post: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1901076&SiteID=1
I am trying to do this. Basically, if the field I am checking contains a space - not an empty string - I want to assign it an empty string so it will get converted to NULL when it hits the SQL destination. The space character from the source is causing the rows to fail I want to force a NULLin the database as a "workaround" from something I am working on.
I thought I had this set up correctly, but it is not working. I have the field in question as an input field set to ReadWrite
If Row.[COLNAME].ToString = " " Then
Row.[COLNAME] = ""
End If
I am getting the following error:
[Assign District Code [12469]] Error: System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket)
I can provide more details if needed.
Thanks for your help.
View 17 Replies
View Related
Feb 6, 2008
Hi
I have a script component task that uses a column (which contains filenames) as input,
my problem is i cant access this in the script ? the column name is "Document"
and i have tried .
Test_var = Me.ProcessInput(186, "fulldoc").Value
View 1 Replies
View Related
Nov 6, 2006
Hi Everyone:
I have a quick but imp SSIS question. I have a For Each Loop Container, and inside that I wish to add a Execute SQL Task item, so I can call a sp to do some inserts/updates. The ForEachLoop container is looping thru a ADO Object source variable(which is the user variable defined by me, as a FullResultSet). In my Execute SQL Task, I would like to utilize one of the columns from the result set as an input parameter to my Stored procedure. Can someone please advise on how to do this? Please let me know if you have any more questions. I am waiting for a response... Thanks in advance.
MA
View 1 Replies
View Related
Feb 6, 2008
Hi
I have a script component task that uses a column (which contains filenames) as input,
my problem is i cant access this in the script ? the column name is "Document"
and i've tried Me.ProcessInput("Document")
View 3 Replies
View Related
May 12, 2006
I have a script component which loads a file which is in a custom format. The script component is inside a For Each Loop Container and it uses a flat file connection manager. The loop sets the connection string for the connection manager.
The problem I'm having is that the connection string needs to be set to something every time that I start the package but I don't know ahead of time what file there will be, so I get a System.IO.FileNotFoundException error on the script component. If I manually set the variable for the connection string and point it to a file that exists, then the package runs fine but at the end of the package the connection string is set to the last file loaded and this file will no longer exist the next time the package runs.
I hope this makes sense...
View 1 Replies
View Related
May 16, 2006
OutCollection[1] holds the erroroutput columncollection.
metaData.OutputCollection[1].OutputColumnCollection.RemoveObjectByID(errOutputCol.ID);
some times 1 Or 2 columns gets deleted, after that the exception is raised.
View 1 Replies
View Related
Mar 12, 2008
Hi,
I have an Excel file source. I keep getting this error when running the package:
"The external metadata column collection is out of synchronization with the data source columns. The column "x" needs to be updated in the external metadata column collection."
When I get this error with regular flat files, it's because I've changed the data type of a given column in the flat file connection manager. And I resolve it simply by double-clicking on the flat file source task, and viola - it corrects it for me.
How do I correct this with an Excel file? Help.
Thanks
View 10 Replies
View Related
Sep 21, 2006
Hi ,
Im trying to build a package that will copy data from excel to SQL
in a program
unfortunately , when I open the package xml file and I drill into the
oledb destination I see that I have no available input columns
what could be the problem ?
thanks ahead
Eran
p.s
the script:
Dim p As Package = New Package()
Dim e As Executable = p.Executables.Add("DTS.Pipeline.1")
Dim thMainPipe As TaskHost = CType(e, TaskHost)
thMainPipe.Properties("Name").SetValue(thMainPipe, "Data Flow")
Dim dataFlowTask As MainPipe = CType(thMainPipe.InnerObject, MainPipe)
' Create excel connection MANAGER
Dim excelCon As ConnectionManager = p.Connections.Add("EXCEL")
excelCon.Name = "ExcelSourceConn"
excelCon.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=e: ry ry ry.XLS;Extended Properties=""Excel 8.0;HDR=YES"""
' Create sqldev connection Manager
Dim sqlCon As ConnectionManager = p.Connections.Add("OLEDB")
sqlCon.Name = "sqldevConn"
sqlCon.ConnectionString = "Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;User ID=sa;Initial Catalog=InsFocus_Admin_Eran;Data Source=SQLDEVSQLDEV"
''create source component
Dim excelSource As IDTSComponentMetaData90 = dataFlowTask.ComponentMetaDataCollection.New()
excelSource.Name = "ExcelSource"
excelSource.ComponentClassID = "DTSAdapter.ExcelSource.1"
Dim excelInstance As CManagedComponentWrapper = excelSource.Instantiate()
excelInstance.ProvideComponentProperties()
excelSource.RuntimeConnectionCollection(0).ConnectionManager = DtsConvert.ToConnectionManager90(p.Connections(0))
excelInstance.SetComponentProperty("AccessMode", 0)
excelInstance.SetComponentProperty("OpenRowset", "business_codes$")
excelCon.AcquireConnection(Nothing)
'excelInstance.ReinitializeMetaData()
excelInstance.ReleaseConnections()
Dim sqldev As IDTSComponentMetaData90 = dataFlowTask.ComponentMetaDataCollection.New()
sqldev.Name = "sqldev"
sqldev.ComponentClassID = "DTSAdapter.OLEDBDestination.1"
Dim sqldevInstance As CManagedComponentWrapper = sqldev.Instantiate()
sqldevInstance.ProvideComponentProperties()
sqldev.RuntimeConnectionCollection(0).ConnectionManager = DtsConvert.ToConnectionManager90(p.Connections(1))
sqldevInstance.SetComponentProperty("AccessMode", 0)
sqldevInstance.SetComponentProperty("OpenRowset", "business_codes")
sqldevInstance.AcquireConnections(Nothing)
sqldevInstance.ReinitializeMetaData()
sqldevInstance.ReleaseConnections()
Dim path As IDTSPath90 = dataFlowTask.PathCollection.New()
path.AttachPathAndPropagateNotifications(excelSource.OutputCollection(0), sqldev.InputCollection(0))
MsgBox(excelSource.OutputCollection.Count)
'For Each input As IDTSInput90 In sqldev.InputCollection
' Dim vInput As IDTSVirtualInput90 = input.GetVirtualInput
' For Each vColumn As IDTSVirtualInputColumn90 In vInput.VirtualInputColumnCollection
' ' Call the SetUsageType method of the design time instance of the component.
' sqldevInstance.SetUsageType(input.ID, vInput, vColumn.LineageID, DTSUsageType.UT_READONLY)
' Next
'Next
Dim app As Application = New Application()
app.SaveToXml("c:myXMLPackage.dtsx", p, Nothing)
View 2 Replies
View Related
Jan 11, 2008
Hi!
I have a "little" problem with nested case model:
-- "normal" database:
DROP TABLE [unitInfo] ;
GO
CREATE TABLE unitInfo (
unitID INT PRIMARY KEY
, beginDate SMALLDATETIME
, area VARCHAR(10)
, partSize INT
, y2predict MONEY
) ;
go
INSERT INTO unitInfo
VALUES (1, '2007-02-01', 'home', 42, 10.0) ;
INSERT INTO unitInfo
VALUES (2, '2007-03-05', 'home', 43, 11.0) ;
INSERT INTO unitInfo
VALUES (3, '2007-02-02', 'office', 11, 11.4) ;
INSERT INTO unitInfo
VALUES (4, '2007-02-01', 'office', 10, 33.6) ;
INSERT INTO unitInfo
VALUES (5, '2007-02-01', 'office', 42, 44.1) ;
CREATE TABLE unitLog (
id INT IDENTITY(1, 1)
PRIMARY KEY
, logtime SMALLDATETIME
, -- combination of logtime/unitID is unique
unitID INT
, -- "FK" on unitInfo
m1 FLOAT
, m2 FLOAT
)
INSERT INTO [unitLog]
VALUES ('2007-01-01', 1, 43.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-01', 2, 43.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-01', 3, 63.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-02', 4, 432.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-02', 1, 43.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-03', 1, 423.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-04', 1, 432.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-05', 2, 43.0, 441.0)
INSERT INTO [unitLog]
VALUES ('2007-01-06', 2, 43.0, 4.0)
INSERT INTO [unitLog]
VALUES ('2007-01-06', 3, 43.0, 4.0)
INSERT INTO [unitLog]
VALUES ('2007-01-07', 1, 4.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-08', 1, 3.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-08', 1, 43.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-08', 1, 43.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-09', 2, 143.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-10', 3, 143.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-11', 4, 43.0, 144.0)
INSERT INTO [unitLog]
VALUES ('2007-01-11', 5, 43.0, 144.0)
INSERT INTO [unitLog]
VALUES ('2007-01-12', 2, 43.0, 144.0)
INSERT INTO [unitLog]
VALUES ('2007-01-13', 4, 413.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-14', 4, 43.0, 414.0)
INSERT INTO [unitLog]
VALUES ('2007-01-14', 1, 43.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-20', 1, 43.0, 414.0)
INSERT INTO [unitLog]
VALUES ('2007-01-22', 1, 43.0, 414.0)
-- SSAS:
CREATE MINING STRUCTURE NestedStructure
( unitID LONG KEY, beginDate DATE CONTINUOUS, area TEXT DISCRETE
, partSize LONG CONTINUOUS, y2predict DOUBLE CONTINUOUS
, logdata table ( [id] LONG KEY, unitID LONG CONTINUOUS
, m1 DOUBLE CONTINUOUS, m2 DOUBLE CONTINUOUS
)
)
ALTER MINING STRUCTURE NestedStructure
ADD MINING MODEL nestedModel ( unitID , beginDate REGRESSOR, area , partSize REGRESSOR
,y2predict REGRESSOR PREDICT_ONLY
, logdata ([id] , unitID
, m1, m2
)
) USING Microsoft_Decision_Trees
/* version 1*/
insert into NestedStructure ( unitID, beginDate, area, partSize, y2predict
, logdata(skip,unitID, m1, m2))
openrowset('sqloledb', Server=myserver;Trusted_Connection=yes;,
'Shape {select * FROM mydb.dbo.unitInfo }
Append ( { select id, unitID, m1, m2 from mydb.dbo.unitLog }
Relate unitID to unitID ) as logdata ')
Parsing the query ...
OLE DB error: OLE DB or ODBC error: Syntax error or access violation; 42000.
Parsing complete
Where is the error?
/*version 2*/
CREATE MINING STRUCTURE NestedStructure1
( unitID LONG KEY, beginDate DATE CONTINUOUS, area TEXT DISCRETE
, partSize LONG CONTINUOUS, y2predict DOUBLE CONTINUOUS
, logdata table ( [id] LONG KEY, unitID LONG CONTINUOUS
, m1 DOUBLE CONTINUOUS, m2 DOUBLE CONTINUOUS
)
)
ALTER MINING STRUCTURE NestedStructure1
ADD MINING MODEL nestedModel1 ( unitID , beginDate REGRESSOR, area , partSize REGRESSOR
,y2predict REGRESSOR PREDICT_ONLY
, logdata ([id] , unitID
, m1, m2
)
) USING Microsoft_Decision_Trees
insert into mining structure NestedStructure1 ( unitID, beginDate, area, partSize, y2predict
, logdata(skip,unitID, m1, m2))
Shape {openquery(dsnDB,'select * FROM mydb.dbo.unitInfo') }
Append ( { openquery(dsnDB,'select id, unitID, m1, m2 from mydb.dbo.unitLog') }
Relate unitID to unitID ) as logdata
Parsing the query ...
Error (Data mining):
INSERT INTO error: The '[logdata].[id]' nested table key column is not bound to an input rowset column.
Parsing complete
Remark that combination logtime/unitID is the natural key in unitLog.
"ID" is the surrugate key.
What is wrong here...?
View 6 Replies
View Related
Feb 27, 2008
Hi, I was wondering how I can complete a column (which doesnt have an input one) with data.
For example:
I have a sql query which bring data of 3 columns
ID | FISRT NAME | LAST NAME
1 MIKE MORGAN
2 SARA JOHANES
So, I will insert that data in a FLAT FILE CONNECTION MANAGER, which I configured with 3 columns and I did the corresponding mapping in the FLAT FILE DESTINTATION.
Now, If I add one more column in the FLAT FILE CONNECTION MANAGER, I will not have it mapped to a input one, obviously. So, what I need is to add one more column to the flat file destination and complete it with zeros values in it.
Probably I can solve this part by introducing a DERIVED COLUMN and there I can configure the zeros that I want to add to the column. But I'm not sure if I can do that without having a input column.
So, the question will be, how can I add one column to a flat file which doesnt have a input and introduce any value that I want to it?
Hope I was clear
Thanks for your help.
Beli
View 4 Replies
View Related
Dec 22, 2006
Is there a way to preselect the input columns a custom component wanna use. Lets say by DataType (select all of DT_CY for example).
I tried to use the
OnInputPathAttached()
to iterate over the inputColumnCollection and set the UsageType. Didn't worked.
Thanks in advance
View 4 Replies
View Related
Jul 5, 2006
Hi,
In my data flow taks, The Source data is coming from AS400 has 4 columns,
I need to achieve the followings and require your help.
1. Generate a new column which will be combination of concating these 4 columns.
2. Need to add an extra row for Header & Footer.
Please Help.
View 7 Replies
View Related
May 29, 2007
I have three input columns from my flat file, defined as follows:
Col_A
Col_B
Col_C
Now, what I want to do is pick the one that is populated, and put it into my table, in the column called
ABC_INPUT
I assume that I want to use a derived column, but how do I filter out columns that contain only NULL values?
Thanks!!
jim work
View 5 Replies
View Related
Aug 7, 2007
I have a stored proc I am updating in an OLEDB Command from the results of a Transform Script Component. The Stored Proc has over 65 input parameters, most of them have a NULL passed in. I dont want to create output columns in the Transform Script Component for all of them to map them from the "Available Input Columns" to "Available Destination Columns".
I want to create 3 or 4 generic Output columns for their data type - say IntegerOutput (datatype Int), DateTimeOut (datatype datetime) and so on. The I want to map these generic columns in the OLEDB Command as Available Input Columns" to multiple "Available Destination Columns" - wherever the datatype matches the input column.
But the OLEDB Command Column Mappings let me map One to One only. This will create a huge and unnecessary workload for me to develop and maintain - when I tell you I have 3 such stored procedures, all of whose interfaces are exactly same and for which I can create similar Output columns in the Transform Script Component.
So how do I go about doing this the smart way?
thanks in advance!
View 4 Replies
View Related
May 2, 2007
We are trying to use the Import/export wizard to load a text file to a SQL Server 2005 database. The input file has a variable number of columns per row. For example, the first row has 3 columns, the second has 7, the third has 3, etc. The number of columns varies from 2 to 9 in the input file. The columns are separated by an uptick (`) and the rows are terminated by {CR}{LF}. We are using code page 1252. On processing, the wizard reads the first row (with 3 columns) ok, but then assumes all the other rows have 3 columns and parses the rows accordingly, ignoring the field and row terminators.
The process worked fine with SQL Server 2000. Is there some setting that we are missing, or some configuration on the database that we should be checking?
Thank You
View 3 Replies
View Related
May 15, 2008
I'm using a Row Count Task to count the number of records passing thru a particular path in my data flow. I created a package variable and referenced this variable in the Components Properties tab in the Row Count Task. I believe this is the minimum I need to do to get the row count.
However, as I explore the other tabs in the editor, I see there is something called Input Columns tab. What is this for? I didn't select anything in there and things are working fine. At first I thought that I had to choose the columns that I want to have available to me for further processing after the Row Count Task, but this isn't the case. I am able to see all my columns coming out of the Row Count Task even tho I didn't do anything in the Input Columns tab.
So, what is this setting for?
View 4 Replies
View Related
Oct 17, 2007
Can anyone please help
I am trying to get a table from production to development created and populated with data in Prod. When I create a package to set the data flow on the available input columns in mappings I do not see any columns there. The source has been defined as the production table.
Thanks a bunch
View 3 Replies
View Related
May 19, 2008
hi,
this is sanjeev,
i have SSIS package, using my c# program i want to add one execute package task to this package's sequence container.
it is creating the new package with out any probelm. but when i opened the package and try to move the newly created exeute package task it is giving the following error.
the element cannot be found in a collection. this error happens when you try to retrieve an element from a collection on a container during the execution of the package
this is my code
{
Package pkg = new Package();
string str = (string)entry.Key;
pkg.Name = str;
alEntity = (ArrayList)entry.Value;
ConnectionManager conMgr;
Executable chPackage;
TaskHost executePackageTask;
Microsoft.SqlServer.Dts.Runtime.Application app = new Microsoft.SqlServer.Dts.Runtime.Application();
//string PackagePath = @"c:Genesis.dtsx";
//p = app.LoadPackage(PackagePath, null);
p = new Package();
p.LoadFromXML(parentPackageBody, null);
p.Name = str;
//Sequence seqContainer;
IDTSSequence seqContainer;
//seqContainer = (Sequence)p.Executables["Extract Genesis Data"];
seqContainer = ((Sequence)p.Executables[0]);
string packageLocation = @"Geneva Packages";
conMgr = p.Connections["SQLChildPackagesConnectionString"];
foreach (string val in alEntity)
{
if (seqContainer.Executables.Contains("Load_" + val) == false)
{
chPackage = seqContainer.Executables.Add("STOCK:ExecutePackageTask");
executePackageTask = (TaskHost)chPackage;
executePackageTask.Name = "Load_" + val;
executePackageTask.Description = "Execute Package Task";
executePackageTask.Properties["Connection"].SetValue(executePackageTask, conMgr.Name);
executePackageTask.Properties["PackageName"].SetValue(executePackageTask, packageLocation + ddlApplication.SelectedItem.Text + @"" + executePackageTask.Name);
}
}
app.SaveToXml(Server.MapPath("../SynchronizeScript/Packages/" + ddlApplication.SelectedItem.Text + @"") + str + ".dtsx", p, null);
}
please let me know what is the wrong in my code.
thanks in advance.
regards
sanjeev bolllina
sanjay.bollina@gmail.com
View 14 Replies
View Related
Mar 10, 2008
Hi,
I have an SSIS Package. I am using script component to loop through input columns and their values. I am not able to do Null checking. The code is as below. In place of dashes , I want to do null checking but am not able to do. I tried vbNull, IsNull, TypeOf, System.dbNull but nothing is working. I guess am missing something here. Can anyone help me with this.
For Each column In Me.ComponentMetaData.InputCollection(0).InputColumnCollection
columnValue = rowType.GetProperty(column.Name)
If Not --------------- Then
RowData += ((FormatElement(column.Name) + ReplaceSpecialChars(columnValue.GetValue(Row, Nothing).ToString()) + FormatElement(column.Name, True)))
End If
Next
Thanks in Advance.
View 11 Replies
View Related
Jan 23, 2008
Is there by chance a cunning way to make the input columns automatically populate the output of an asynchronous script transformation?
My transformation writes several rows for each input row read. I'm creating some new columns along the way but I'd like all of the input columns to get output each time also. However I can't see any obvious way to achieve this, short of manually defining each column to the output and populating it in the script.
View 3 Replies
View Related
Dec 14, 2007
I have set up a script task in one of my packages that I have set up to modify another package right before running it. This package is nothing more than a data flow task that transfers rows via an sql command from one table into another. The strange thing is I have gotten it to work with some tables but not with others. T
he script bombs out in the loop where i map all of the columns found below, where i use MapInputColumn with the error HRESULT: 0xC0010009 On Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSExternalMetadataColumnCollection90.get_Item(Object Index)
The thing is this happens after looping roughly 55 times but there are still about 100 columns that it needs to loop through still.
Code Block
Dim input As IDTSInput90 = data_destination.InputCollection(0)
Dim virtual_input As IDTSVirtualInput90 = input.GetVirtualInput
Dim input_column As IDTSInputColumn90
Dim virtual_column As IDTSVirtualInputColumn90
' Iterate through the virtual input column collection and map field names
For Each virtual_column In virtual_input.VirtualInputColumnCollection
input_column = inst_data_destination.SetUsageType(input.ID, virtual_input, virtual_column.LineageID, DTSUsageType.UT_READONLY)
inst_data_destination.MapInputColumn(input.ID, input_column.ID, input.ExternalMetadataColumnCollection.FindObjectByID(virtual_column.Name).ID)
Next
Just for kicks i removed the mapping portion of the code and left in the SetUsageType to see if it would update the available input columns in the destination. The script will then finish successfully but still only the 55 or so fields out of 155 are available in the input. So i then stepped through the script with the mapping portion still disabled and after it loops successfully, i call reinitialize meta data and it produces an error in the input_column variable: HRESULT: 0xC0047041.
I find it odd that this still reports to me that the script finished successfully and I also find it odd that this works fine on two other tables I've tested but not this one. Any insight would be greatly appreciated.
View 1 Replies
View Related
Nov 20, 2006
Hi, all experts here,
Thank you very much for your kind attention.
I got a strange problem with SQL Server 2005 data mining models though. I have selected the input columns for my mining model (which are different from the input columns for its mining structure, since I ignored some of the columns for the selected model). But the mining model still used all input columns from the mining structure rather than those I chose for the mining model.
Would please any one here give me any guidance and advices for that. Really need help for that.
Thanks a lot in advance for any help.
With best regards,
Yours sincerely,
View 7 Replies
View Related
Dec 22, 2006
Hi,
In a SSIS Data flow task, whatever you are doing with the input columns that come from a Data source like a Flat File Source, these columns are always visible and available as input columns for all Transformation and Destination components in the Data flow.
Our Custom Component is a column mapping component that transforms many input columns into many oputput columns and we would like that the used input columns are not available anymore to the downstream components...
Is that possible?
I saw that with the Unpivot component it is possible to make some input columns unavailable to downstream components...So I think there is a way to do the same in a custom component...
Thanks for any help,
David
View 1 Replies
View Related
