I have a very large table , and from that table I need just 2 records with column1 = 'A' and column1 = 'B' .
Here I don't think if I can not use OR or IN or Case operators because I need exactly 2 records not more.
I need to select specific values from all rows where the value of a specific column is "Active"
This part works: SELECT LastName, FirstName, MiddleInit, ClientId FROM dbo.Client
But I want to add: WHERE StatusType = (Active) and how to do this.
SQL Server: 2008 R2
Question A : Â I need to truncate a table, it has 21 millions of rows and it has a size of 14 GB. Â Â Â Â Â Â Â
                1-  How do I find out if this table is not being referenced by a FOREIGN KEY?
                2-  Does it Participates in a indexed view?
                3- Is being published by using transactional replication or merge replication?
Question B: Â How do I safely truncate that table?Â
Hello,
What is the command to select rows between RowNum25 and RowNum30 in a Sql table?
Aditya
Hi Friends...
I have one table , suppose TableA which contains following columns..
I want to select records from this table where time difference is more than 2 min. (tec_insert_date) This means first record time and second one, then second one and third one..and so on..
How to select these records...pls give me some sql query...
thanks in advance
tec_number tec_insert_date tec_description
----------- ------------------------------------------------------ --------113909 2005-12-19 18:59:01.920 Description
113910 2005-12-19 18:59:02.043 Description
113911 2005-12-19 18:59:02.060 Description
113912 2005-12-19 18:59:02.060 Description
113913 2005-12-19 18:59:02.090 Description
113914 2005-12-19 18:59:02.090 Description
113915 2005-12-19 18:59:02.263 Description
113916 2005-12-19 18:59:02.437 Description
113917 2005-12-19 19:00:34.703 Description
113918 2005-12-19 19:00:34.720 Description
113919 2005-12-19 19:00:34.937 Description
113920 2005-12-19 19:00:35.607 Description
113921 2005-12-19 19:00:35.607 Description
113922 2005-12-19 19:00:35.840 Description
113923 2005-12-19 19:00:35.903 Description
113924 2005-12-19 19:00:36.200 Description
113925 2005-12-19 19:00:36.200 Description
113926 2005-12-19 19:00:36.217 Description
113927 2005-12-19 19:00:36.217 Description
113928 2005-12-19 19:00:36.217 Description
113929 2005-12-19 19:00:36.230 Description
113930 2005-12-19 19:00:36.230 Description
113931 2005-12-19 19:00:36.230 Description
113932 2005-12-19 19:00:36.230 Description
113933 2005-12-19 19:00:36.323 Description
113934 2005-12-19 19:00:36.450 Description
113935 2005-12-19 19:00:38.863 Description
113936 2005-12-19 19:00:38.943 Description
113937 2005-12-19 19:00:38.943 Description
113938 2005-12-19 19:00:39.100 Description
113939 2005-12-19 19:00:39.147 Description
113940 2005-12-19 19:00:39.300 Description
113941 2005-12-19 19:00:40.920 Description
113942 2005-12-19 19:01:23.363 Description
113943 2005-12-19 19:03:03.533 Description
113944 2005-12-19 19:03:08.197 Description
113945 2005-12-19 19:03:12.853 Description
113946 2005-12-19 19:03:14.087 Description
113947 2005-12-19 19:04:40.730 Description
113948 2005-12-19 19:04:44.843 Description
113949 2005-12-19 19:04:51.030 Description
113950 2005-12-19 19:04:56.313 Description
113951 2005-12-19 19:04:58.950 Description
113952 2005-12-19 19:09:19.950 Description
113953 2005-12-19 19:09:21.277 Description
113954 2005-12-19 19:09:21.340 Description
113955 2005-12-19 19:09:24.397 Description
113956 2005-12-19 19:09:35.660 Description
113957 2005-12-19 19:09:46.480 Description
113958 2005-12-19 19:09:47.790 Description
113959 2005-12-19 19:10:23.713 Description
113960 2005-12-19 19:10:23.980 Description
113961 2005-12-19 19:11:02.307 Description
113962 2005-12-19 19:11:52.040 Description
113963 2005-12-19 19:12:31.800 Description
113964 2005-12-19 19:12:31.940 Description
113965 2005-12-19 19:12:31.940 Description
113966 2005-12-19 19:13:10.500 Description
113967 2005-12-19 19:13:10.500 Description
113968 2005-12-19 19:13:50.697 Description
113969 2005-12-19 19:13:50.697 Description
113970 2005-12-19 19:13:50.743 Description
113971 2005-12-19 19:13:50.870 Description
113972 2005-12-19 19:13:50.883 Description
113973 2005-12-19 19:14:09.290 Description
113974 2005-12-19 19:14:47.680 Description
113975 2005-12-19 19:14:47.693 Description
113976 2005-12-19 19:14:48.630 Description
113977 2005-12-19 19:14:48.630 Description
113978 2005-12-19 19:14:49.127 Description
113979 2005-12-19 19:14:49.127 Description
113980 2005-12-19 19:14:49.160 Description
113981 2005-12-19 19:14:49.300 Description
113982 2005-12-19 19:14:49.313 Description
113983 2005-12-19 19:15:07.287 Description
113984 2005-12-19 19:15:07.783 Description
113985 2005-12-19 19:21:43.093 Description
113986 2005-12-19 19:22:01.920 Description
113987 2005-12-19 19:22:01.920 Description
113988 2005-12-19 19:22:20.780 Description
113989 2005-12-19 19:22:38.547 Description
113990 2005-12-19 19:22:38.547 Description
113991 2005-12-19 19:22:39.340 Description
113992 2005-12-19 19:22:39.340 Description
113993 2005-12-19 19:22:40.263 Description
113994 2005-12-19 19:22:41.010 Description
113995 2005-12-19 19:22:41.867 Description
I am working on a multi-page datagrid that pulls data from a database. The issue I am running into is the SQL select query. What I have is a table to 55 items. What I need to do is grab the first 35 of those items and bind the resulting DataReader to the grid, print the page, then grab the remaining 20 items, bind to the grid and print the page.
I can use "SELECT TOP 35 FROM Table" to get the first 35 items, but I don't know how to get the remaining 20 items. Is there a way to say something like "SELECT TOP 20 FROM Table" but specify only the rows that begin after row 35?
I tried doing this with an ArrayList but couldn't bind it to the DataGrid.
Any suggestions?
Hi,
Im using a select statement to query out the data from a table.
ex:- select * from tblperson
Now this select statement is returning me 500 rows
I want to see only the records between 100 - 200 out of these 500 rows..
Anyone help
I have a CTE query against a table with 32K rows that runs fine in 2008R2. I am running it in 2014 Std Ed. against the same data and it runs very slowly. Looking at the execution plan I think I see what's contributing to the slowness.
Note that the "actual number of rows" is some 351M...how is this possible?
the query:
declare @amts table (claim int,allowed decimal(12,2),copay decimal(12,2),deductible decimal(12,2),coins decimal(12,2));
;with unpaid (claimID) as (select claimID from claim where amt+copay + disct+mm + ded=0)
insert @amts
select lineID, sum(rc), sum(copay), sum(deduct),
case when sum(mm)>0 and (sum(mm)<sum(mmamt)) then sum(mm) else 0 end
from claimln
where status is null
and lineID not in (select claimID from unpaid)
group by lineID
it's like there's some massively recursive process going on?
hi
i m using row count in order to get first 16 rows from a specific table...now i want to get rows from row no. 16 to 32 (or any no which i want)...can any one tell meee how can i query it using sql server 200
Hi
I'm no expert at SQL, I can't figure out how to solve that problem.
The following statement:
SELECT TeamMemberId, max(MonthId) as MonthId
FROM Position
INNER JOIN [Month] m
INNER JOIN [Year] y ON m.YearId = y.Id AND (y.Id = @yearId OR y.Id < @yearId)
ON m.Id = Position.MonthId
GROUP BY TeamMemberId
Returns
TeamMemberId MonthId
1 14
6 20
which is exactly what I want: The greates MonthId for each TeamMember in a specific year.
But I need more data for this postition, like the PositionName.
But the statement:
SELECT TeamMemberId, max(MonthId) as MonthId, PositionName
FROM Position
INNER JOIN [Month] m
INNER JOIN [Year] y ON m.YearId = y.Id AND (y.Id = 2 OR y.Id < 2)
ON m.Id = Position.MonthId
GROUP BY TeamMemberId, PositionName
Returns
TeamMemberId MonthId PositionName
1 2 ***. d. Geschäftsführung
6 20 ***. d. Geschäftsführung
1 14 CEO
6 16 CEO
The red rows are the ones I wanna get.
How can I achieve that only the max. MonthId rows are returned, even when I need to select more columns?
Any help is much appreciated.
Regards,
Stefan
I need to show the total amount of rows in a specific table?
The query is as follows:
As part of the planning process to expand the database that supports Northwind operations, the IT manager would like to know how many rows are currently in specific tables so that he can conduct capacity planning.
The results needed include two columns, TableName( containing all the tables in the database and Rows, which contain the total amount of all the rows per table).
I have a text file which I used as an initial load of data, containing a little over a million rows. I would like to produce a daily "update" file, which contains changes to existing rows, and creation of new rows. What is the best method of updating the existing table in power pivot?
View 2 Replies View Relatedhi there
i am using .net framework 1.1 with SQL 2000 .
i want the data in table to get deleted automatically after 30 days of inserting data.
so how do i achieve this?
hi,
i need SP that receive 2 integers ,@NUM_ROWS and @PAGE_NUMBER,
and return the rows in that page.
for example:
SP(4,2) will return 4 rows in page number 2 .
So if i have table with 9 rows i will get rows 5-8,
the first page is rows 1-4 the second page is 5-8 and the 3 page is row 9.
i have to assume that rows can be deleted form that table.
thanks
SQL 7 SP1 NT4 SP5
I have a TRANSACTION table with 150 million rows.
I have a USER table.
Each user has about 600 records in the TRANSACTION table.
The TRANSACTION cluster index is on USERID + RECID . The second index is on USERID + Fieldx + Fieldy.
The TRANSACTION table gets about 1.4 million inserts in a normal day and about 40,000 updates.
I want to go through the USER table and delete all users who have not visited me in a while.
I want to do this without substantially hindering performance in a production environment. I can perform this over a week period or two if needed.
The best way I thought of doing this was to grab x amount of users in a cursor and loop through deleting their corresponding TRANSACTION records.
Does anyone have any ideas on a better way. What is going to happen to my indices during this time ?
Thanks !!!
I have a table that has for each shop a value that can change over time.For example
BK_POS 1 --> Segment A
BK_POS 1 --> Segment /
What I would like to achieve is to get all distinct Shops (BK_POS) from the table above, but if for that specific pos a row exists where the segment = "/" then I do not want to take this BK_POS in my select query.More concrete, the for example above I do not want to select BK_POS 1 because he has one row where the segment = "/".
Hi there !
Thanks for taking the time to read this thread.
I don't know whether anyone has this problem, but I am definitely not using the right keywords to search for a thread.
My situation is this...
I have a dataset that has values to fill cells to multiple tables in a report.
However, I only want to select specific data from the dataset to fill textboxes and others.
I cannot change the stored procedure, but the sample of the data is shown below:-
Row Stat Val
0 dtRpt1 02/01/2005
1 Value1 1
2 Value2 2000
3 dtMailSent 02/28/2005
4 Value3 0
5 Value4 5
6 Value5 658
I know it looks weird, but the row really represents which "row" or textbox is it to fill with the Val. The Stat Column is just a way to make sure that I am filling the right values.
so my new report would have multiple tables to denote different categories.
In my first table, I tried putting the cells as follows:-
(expressions are highlighted in italics and bold)
TextBox1 =IIF(Fields!Row.Value =0, Fields!Val.Value,"")
Table1
Column1
DetailRow1 =IIF(Fields!Row.Value =1, Fields!Val.Value,"")
DetailRow2 =IIF(Fields!Row.Value =2, Fields!Val.Value,"")
Table2
Column1
DetailRow1 =IIF(Fields!Row.Value =3, Fields!Val.Value,"")
DetailRow2 =IIF(Fields!Row.Value =4, Fields!Val.Value,"")
DetailRow3 =IIF(Fields!Row.Value =5, Fields!Val.Value,"")
DetailRow4 =IIF(Fields!Row.Value =6, Fields!Val.Value,"")
I only expect this report to print out one page holding the previous values.
However, it ended up printing like this
----------------------------------------------------------
Table1
Column1
DetailRow1 1
DetailRow2
Column1
DetailRow1
DetailRow2 2000
Table2
Column1
DetailRow1 02/28/2005
DetailRow2
DetailRow3
DetailRow4
Table2
Column1
DetailRow1
DetailRow2 0
DetailRow3
DetailRow4
Table2
Column1
DetailRow1
DetailRow2
DetailRow3 5
DetailRow4
Table2
Column1
DetailRow1
DetailRow2
DetailRow3
DetailRow4 658
------------------------------------------------------
I tried putting it into the headerrows instead of DetailRows, and it ended up printing the last value.
Is there anyway to do this ? print all the values out in one table ? I tried using textboxes, but I think I got my expression wrong.
Is this the correct expression ?
=IIF((Fields!Row.Value,"Dataset") =1, (Fields!Val.value, "Dataset"), "")
and it give me an error
The value expression for the textbox €˜textbox5€™ contains an error: [BC30455] Argument not specified for parameter 'FalsePart' of 'Public Function IIf(Expression As Boolean, TruePart As Object, FalsePart As Object) As Object'.
Appreciate any advice or suggestion for this scenario !
Thanks!
Bernard
There is a stored procedure. It uses linked server. As we will be migrating to amazon cloud, our architect instructed not to replace linked server with openquery.
View 8 Replies View RelatedI have the following data
MASTER
id
name
DETAIL
id
master_id
name
I want a perform a query where i can get all the rows of the master table which have no relationed rows in detail table.
How can I do that???
I want to ship 500,000 aged transactions each night to an archive table and delete them from their source table in one or more logical units of work (LUW). Each row is approx 60 bytes and there is only one non clustered index on the source table presently.
I'm trying to weigh the pros and cons of 3 alternatives. One of them would basically insert the non-aged rows into tempdb, ship the aged records, truncate the table and then insert the tempdb records back into their source all in the same LUW.
For this alternative, I'd at least like to turn off logging when the records get inserted into tempdb as I dont see any value in logging that part of the activity. Is this possible?
I have a job that selects alot of data from one database into another.
Can I choose not to log this operation (doesn't need to be and the log fills up before it's done)
Thanks..
type of code:
Insert into database_1
Select * from database_2
Let us say that I have a table with two sets of values as such:Item Extension--- ----100023 1100025 1100025 2100028 1100029 1100029 2100029 3[...]Note that a given item number can appear multiple times if it has morethan one extension number.I want to be able to select the first N entries as grouped by itemnumber. So if N = 3, that would return 100023, 100025 and 10028 withtheir associated extentions. I would also like to be able to selectsay, the 2nd through 9th entries grouped by item number.I've tried something like this to give me row counts:select rank = count(1), t1.item, t1.extensionfrom ItemTable t1 inner join itemTable t2on t1.item >= t2.itemgroup by t1.item, t1.extensionorder by rankBut that gives me this sort of result:Rank Item Extension---- --- ----1 100023 13 100025 13 100025 24 100028 17 100029 17 100029 27 100029 3[...]Any suggestions would be welcome.
View 2 Replies View RelatedI've been scratching my head over this one.
It should be pretty easy to do, but I keep going over the same problem.
I have 3 tables (Suppliers, Categories & Suppliers_To_Categories).
Suppliers_To_Categories contains which suppliers are related to which categories.
The set-up is so (simplified):
Suppliers
id
1 Supplier 1
2 Supplier 2
3 Supplier 3
4 Supplier 4
Categories
id
1 Category A
2 Category B
3 Category C
4 Category D
Suppliers_To_Categories
id supplierId categoryId
1 1 1
1 1 2
1 1 3
2 2 3
3 3 1
3 3 3
What I am after is an SQL statement which tells me for a particular category, which suppliers ARE NOT related to it, so they can be assigned.
E.g.
Category D has Suppliers 1-4 unassigned
Category C has Supplier 4 unassigned
Category B has 2, 3, 4 unassigned
Category A has Supplier 2, 4 unassigned etc...
I've got the other side of the SQL statement which tells me which suppliers are assigned to a category (see below):
SELECT Suppliers.*
FROM CatToSupplier INNER JOIN
Suppliers ON CatToSupplier.supplierId = Suppliers.supplierId
WHERE (CatToSupplier.CatId = @CatId)
This is probably really easy, but I've become unstuck!
Hi,
I have a situation where I have 4 tables:
1. 2 Dimensional tables(Parent), DIM1 with 50000 rows, and DIM2 with 1000 rows
2. Fact 1 with 50 columns, 25 Million rows and with FK to DIM1 and DIM2
3. Fact 2 with 40 columns, and 25 Million rows and with FK to DIM1 & DIM2 tables.
Actually the fact 1 and fact 2 have same related data but since our Analysis cube person wanted the fact table not to have more than 50 columns we divided the tables into 2, but they have the same compound key.
Above said, I have a situation where I have to select all the columns, in both fact tables, and do a group by. I wrote the query and ran "Analyze Query in the Database Engine Tuning Advisor" for it. It gave bunch of recomendations about the statistics and indexes which I created. When I executed the query the result came up in matter of seconds, which was good.
In the query I had a condition having MarketName='Bridgeview' and DateID = 344 (FK of today-1).
When I wanted the data for last 30 days I changed to DateID in ( > FK of today -32 and < FK of today), the query responded and worked fine.
But when I changed the query to get MarketName='Aurora' (other than I used when I ran Tuning Advisor), the result returned is empty set. When I removed the MarketName condition, it is supposed to return all markets' data, but it returns only Bridgeview data.
I know the data is in the table for all markets, since reports are rendered from these fact tables for all of these markets(also ran queries to check the fact table data).
I am unable to point out the reason why the query behaves like this. It responds to the date change, but not to the MarketName change.
I really appreciate if anyone can help me point out the problem.
Thanks,
Venkat
Select top 100 * from tab1 order by col1 ---gives me the top 100 order by col1
Select top 200 * from tab1 order by col1 ---gives me the top 200 order by col1
How do I select the top 100 to 200
I have two db-tables:
"TAB01" with structure:
CREATE TABLE TAB01 (
ID int NOT NULL,
Name varchar(64) DEFAULT NULL,
PRIMARY KEY (ID)
)
It contains only name of some object.And "TAB02" with structure:
CREATE TABLE TAB02 (
ID int NOT NULL,
TAB01_ID int NOT NULL,
PositionA int,
PositionB int,
StringVal varchar(32) DEFAULT NULL,
PRIMARY KEY (ID)
)
which contains following data:
ID|TAB01_ID|PositionA|PositionB|StringVal|
1|1|1|1|A|
2|1|1|2|B|
3|1|1|3|C|
[code].....
and I need to find a sequence of values in column "StringVal", for example: A B.I look for a suitable SELECT, that returns (in this case) following result:
TAB02.ID|TAB01.Name|TAB02.PositionA|TAB02.PositionB|
1|ABC|1|1|
10|DEF|2|3|
25|JKL|4|3|
30|MNO|5|1|
36|MNO|5|7|
41|PQR|6|4|
46|STU|7|2|
Data inserted in "TAB02" represents real-life structure:
ID|Name|P01|P02|P03|...|Pxy|
1|ABC|A|B|C|D|E|A|D|
2|DEF|J|K|A|B|F|F|B|
3|GHI|B|A|C|A|F|G|A|F|
4|JKL|F|E|A|B|B|E|E|
5|MNO|A|B|C|B|A|D|A|B|
6|PQR|D|E|F|A|B|A|F|
7|STU|A|A|B|B|E|B|E|
Hi,
I have a table of row IDs, order numbers, and status. Status is a value of 1 or 2. Some rows only exist as a 1, some only as a 2, and some exist twice -- once as 1 and once as 2. I want to select orders that are 2 as well as rows that are 1 but do not also exist in the table as 2. Ultimately I will only see each order number once. Is there a better/faster way than doing multiple selects and comparing them to each other?
Example data:
RowID OrderNum Status
1 101 1
2 102 1
3 102 2
4 103 2
Desired results when selecting ID and ordernum from that table:
1 101
3 102
4 103
Thanks.
I have SQL mobile database. Due to the size and speed, I would like to select only rows that start with a certain set of alphabets. Is there a way to do this? I just don't want to query everything and use only a small number of rows since the recources on the device is limited.
Thanks.
I have encountered a problem with a specific set of tables. The same select yields slightly differing execution plans in two different environments (instances). But the slight variation seems to contain a huge differences in stats. I don't know the significance of these stats. The two tables have the exact same indices.
This is the selcet statement:
SELECT 'xx' FROM DUKS.dbo.Profiler
WHERE DNA_Løbenummer IN
(SELECT DNA_Løbenummer FROM DUKS.dbo.Effektregister
WHERE Sagsnummer = '2015-00002')
Hi,
I would like to know how to add SELECT row to a table variable. It's not for my SELECT syntax(code following is just an ugly example) that I want help it's for the use of table variable.
Your help will greatly appreciate!!!
ex :
DECLARE @MyTestVar table (
idTest int NOT NULL,
anotherColumn int NOT NULL)
SET @MyTestVar = (SELECT idTest, anotherColumn FROM tTest)-- This cause an error :-- Must declare the variable '@MyTestVar'. ???? What?
hi
I want to do a "bulk" insert and then get the id (primary key) of the inseret rows:
insert into table1 select * from table2
If I get the value of the @@identity, I always get the last inserted record.
Any idea how to get the ids of all inserted values?
Thx
Olivier
I know that this is legal sql: "SELECT 1 AS Blah"
I want to do something like this except for I need to select multiple rows each with a different value for Blah. The query needs to be legal to be passed to the SqlCommand.ExecuteReader Method. Is this possible?
I want to return all rows in table giftregistryitems with an additional column that holds the sum of column `amount` in table giftregistrypurchases for the respective item in table giftregistryitems.
What I tried, but what returns NULL for purchasedamount:
SELECT (SELECT SUM(amount) from giftregistrypurchases gps where registryid=gi.registryid AND gp.itemid=gps.itemid) as purchasedamount,*
FROM giftregistryitems gi
LEFT JOIN giftregistrypurchases gp on gp.registryid=gi.id
WHERE gi.registryid=2
How can I achieve what I need?
Here are my table definitions and data:
/****** Object: Table [dbo].[giftregistryitems] Script Date: 02-05-15 22:37:11 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[giftregistryitems](
[id] [int] IDENTITY(1,1) NOT NULL,
[code].....