How To Send Email Using Asp.net 2.0 And How To Find The Smtp Mail Server Name?
Dec 19, 2006How to send email using asp.net 2.0 and how to find the smtp mail server name?
View 1 RepliesHow to send email using asp.net 2.0 and how to find the smtp mail server name?
View 1 RepliesHello,
The Database Mail feature is already enabled on the server, also I have a mail account on the other server.
The problem I faced is that I need to send mail from my SQL Server using a created email account on the other server. How should I configure my email to do that ?
Should I use a sysmail_add_account procedure to enable account, also set profile and profile account ? Does this way creates server mail account that is binded with other email account?
The mail should be sent from my SQL Server.
Thank You.
I am doing some ssis package development in my local machine. I have a requirement to send email the output.
I am developing in my local machine. Is it possible to configure SMTP configuration in my local system to receive the email in Gmail?
if yes, what all are the steps to be followed.
hello,
I would like to send mail from sql server using CDONTS.
I have the sql code for this and it works for internal addresses.
I get an error/warning saying that it cannot relay for external addresses when I try an outside domain.
Is there settings in IIS for the SMTP service that I can change to allow it to relay to the external domains?
I have everything running on the SQL Server, and I do not have access to the exchange server.
Thanks
Hi
I am new to the SSIS package and was trying to figure out how to use SMTP authetication with a 'Send Mail Task' Our company's server requries SMTP authentication for mail. The Send Mail task only allows for Windows authentication.
What can I do to get the SMTP authentication to work for the Send Mail Task?
Regards,
James Robb
Hello,
We have an SSIS job that runs once a day and sends emails.
For security reasons, IT switched the send-mail porton the smtp server from 25 to a different number (let's say 1234).
So, I changed the SSIS SMTP Connection Manager's smtpServer string to smptserver:1234
However, this does not seem to be working. I keep getting 'Send Mail Failure' error.
Any ideas how to set the port number for sending emails using SSIS?
thanks much,
Muhammad
Cobalt Group
I am implementing a fax solution (Right Fax) and pulling email information from a table and passing into a variable. In order to send out a fax via email, the syntax is in the following example below:
Example:
To send a fax from Outlook to Jane Doe at 555-1212, enter:
[RFAX:Jane Doe@/FN=555-1212]
When the following syntax gets passed into the Send Mail Task, into the "To" line and the package is executed I'm receiving the following.
[Send Mail Task] Error: An error occurred with the following error message: "The specified string is not in the form required for an e-mail address.".
[Send Mail Task] Warning: The address in the "To" line is malformed. It is either missing the "@" symbol or is not valid.
I realize it’s a malformed email address. Is it possible to create a group and instead of the fax syntax pass the group name?
i've got a brand new server and just installed SQL 2005.
when i try to send a test email, i get the following error message:
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 5 (2006-11-23T11:49:34). Exception Message: Could not connect to mail server. (No connection could be made because the target machine actively refused it). )
I have checked all items from troubleshoot and eveything is ok...any help ?
thanks
Kind of a newby sql question, but here goes:I have a sql 2005 database that I have a job that runs Sunday morning at 12:30 am. I set it up using SQL Svr Mgt Studio 2005. Under the Management directory I set up Database Mail to work with my local SMTP server. I can send a test email just fine.I then set myself up as an operator with my email address. (Under operators directory) I then went back to the properties of the job I set up, and under 'notification', chose e-mail operator (me) when Job Succeeds. The job runs, itt suceeds, but NO email!It flat out won't work. there are NO entries in teh( email) log for errors either. Anyone? TIA Dan OR is it better to script these jobs using xml? I don't have time to learn a new thing right now, just need it to work!
View 1 Replies View RelatedI am trying to send out notifications when jobs complete (fail or succeed). I have database mail working fine on my DEV server, but I am having issues with it on my PROD server. I am currently having people look into if McAfee may be blocking it.
I am able to send out a test email from SSMS>Management>Database Mail, but when I set a Notification for a job, the job will complete and in the history, it will say "NOTE: Failed to notify 'User' via email."
I have created an Operator and set up Profiles and Accounts, just as I did on my DEV server.
Under IIS SMTP I can set bounced email redirect etc. how to do that with dbmail, the idea is I can get the list of bounced emails somewhere so I can create a report.
Any idea?
thanks
Have anyone been able to set up mail using a SMTP server successfully?
Is it necessary to have a mailbox for outgoing mail on the SMTP server?
Thanks
Lystra
I want to implement a script which will run continuously to find out blocked sessions and send an email when ever it finds the blocking.
View 5 Replies View RelatedHelp with query: I currently cannot be alerted by SQL Mail so I would like to take the script that was generated by SQL server and using the store procedure sp_sqlsmtpmail to generate a email using smtp server to alert me. The store procedure does work. I would like to know if this is possible.
Thanks
Lystra
-- Script generated on 1/21/2005 10:04 AM
-- By: MAMSIsa
-- Server: (local)
IF (EXISTS (SELECT name FROM msdb.dbo.sysalerts WHERE name = N'Demo: Full tempdb'))
---- Delete the alert with the same name.
EXECUTE msdb.dbo.sp_delete_alert @name = N'Demo: Full tempdb'
BEGIN
EXECUTE msdb.dbo.sp_add_alert @name = N'Demo: Full tempdb', @message_id = 9002, @severity = 0, @enabled = 1, @delay_between_responses = 10, @include_event_description_in = 5, @database_name = N'tempdb', @category_name = N'[Uncategorized]'
Then
Exec sp_sqlsmtpmail
@vcTo = 'lwilliams@Huc.com',
@vcBody ='Check out problem Immediataly.',
@vcSubject ='DOCSITE01FDK - Full Tempdb Log'
END
Hello,Does anyone know how I can set SQL Server up so that after it hascompleted a backup sucessfully it will send the completion report toan e-mail address via SMTP.Unfortunatly we cannot install MS OUTLOOK Express or similar.Is this possible?Many thanks in advance,Allan Martin
View 2 Replies View RelatedLokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.).
),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
SSIS dynamic SMTP mail server
Hi All,
I'm trying to make my SEND MAIL TASK in SSIS dynamic, by retrieving SMTP Server name (amongst other email message information) from a table.
I've got an SP that is getting the information into package variable's, and when I don't try and have a dynamic server name (i.e. I use a specified SMTP server in my SMPT Server connection), then the email get sent off.
I'm trying to use an expression to build alter the send mail to use the server name I have in a user variable.
I've tried using the expression for the property:
SmtpConnection set to: RTRIM( @[User::MailServer])
I also tried without the RTRIM - I only added it because the error messages seem to include a full 'string' length, and there doesn't seem to be a 'varchar' data type for SSIS variables.
so:
a> Is SMTPConnection the property I need to be setting? None of the others seem correct
b> If SMTPConnection IS the property I need, does the value give the SMTP Server Name, or just the Name of the connection from the Connection Manager's?
Thanks
Part-Answer to:
b> The SMPTConnection property sets the name of the CONNECTION to be used. That Connection needs to set the name of the server. So n ow, the question becomes, how do I configure that from SQL (I know how to use package configurations from XML files).
i want to check.. Report Server Windows service has Send As permissions on the SMTP server.
how can i do this..
hi need help how to send an email from database mail on row update
from stored PROCEDURE multi update
but i need to send a personal email evry employee get an email on row update
like send one after one email
i use FUNCTION i get on this forum to use split from multi update
how to loop for evry update send an single eamil to evry employee ID send one email
i update like this
Code Snippet
:
DECLARE @id nvarchar(1000)
set @id= '16703, 16704, 16757, 16924, 17041, 17077, 17084, 17103, 17129, 17134, 17186, 17190, 17203, 17205, 17289, 17294, 17295, 17296, 17309, 17316, 17317, 17322, 17325, 17337, 17338, 17339, 17348, 17349, 17350, 17357, 17360, 17361, 17362, 17366, 17367, 17370, 17372, 17373, 17374, 17377, 17380, 17382, 17383, 17385, 17386, 17391, 17392, 17393, 17394, 17395, 17396, 17397, 17398, 17400, 17401, 17402, 17407, 17408, 17409, 17410, 17411, 17412, 17413, 17414, 17415, 17417, 17418, 17419, 17420, 17422, 17423, 17424, 17425, 17426, 17427, 17428, 17430, 17431, 17432, 17442, 17443, 17444, 17447, 17448, 17449, 17450, 17451'
UPDATE s SET fld5 = 2
FROM Snha s
JOIN dbo.udf_SplitList(@id, ',') split
ON split.value = s.na
WHERE fld5 = 3
now
how to send an EMAIL for evry ROW update but "personal email" to the employee
Code Snippet
DECLARE @xml NVARCHAR(MAX)DECLARE @body NVARCHAR(MAX)
SET @xml =CAST(( SELECT
FirstName AS 'td','',
LastName AS 'td','' ,
SET @body = @body + @xml +'</table></body></html>'
EXEC msdb.dbo.sp_send_dbmail
@recipients =''
@copy_recipients='www@iec.com',
@body = @body,
@body_format ='HTML',
@subject ='test',
@profile_name ='bob'
END
ELSE
print 'no email today'
TNX
I'm having trouble in configuring Yahoo's SMTP for Database Mail. Here is my current settings:
Email Address: xxx@yahoo.com
Server Name: smtp.mail.yahoo.com
Port Number: 465
This server requires a secure connection (SSL) - check
Basic Authentication
Username: xxx@yahoo.com
Password: xxx
When I tried sending a test email, it didn't work. But when I changed my SMTP to use Gmail, it worked!
Hi all,At this moment I'm trying to get database mail working. According tosome people it should be easy. Well...that is not the case for me.I'm having the following error:The mail could not be sent to the recipients because of the mail serverfailure. (Sending Mail using Account 2 (2006-11-24T08:48:15). ExceptionMessage: Cannot send mails to mail server. (Command not implemented.The server response was: Command not Supported).)SQL Server 2005 is installed on a separate server and the SMTP Serveris Lotus Notes. connecting with port 25.Start and stopping the SQL Server and SQL Server agent i tried already.i tried sysmail_stop_sp and sysmail_start_sp.Sometimes when starting or stopping the Mail with the followingcommands :exec sysmail_stop_spGOexec sysmail_start_spGOI will get the following error:Msg 233, Level 20, State 0, Line 0A transport-level error has occurred when sending the request to theserver. (provider: Shared Memory Provider, error: 0 - No process is onthe other end of the pipe.)So any help would be appreciated.Hennie
View 1 Replies View RelatedI have attempted to report out errors at the end of an ETL process by alerting supporting DBAs of errors using the SSIS "Send Mail Task". Task completes along with the sequenced packages, but does not mail anything out. No logic at this time for trigger, just success from the previous task triggering the task to send mail. I also get no errors in the output, and I get no output indicating the send mail task fired, but it does go "green". Do I have to enable database mail and have privileges?
Component Configuration:
SMTP Connection Manager - SMTP Server: arsocex02
Send Mail Editor -
From: messerj@arsocdev.bdev.lab.mil
To: sanderss@arsocdev.bdev.lab.mil
MessageSourceType: Direct Input
Expression: MessageSource = "Package>>> " + @[System:ackageName] +" was executed at>>> " + (DT_WSTR, 40) @[System:tartTime] + " by user>>> " + @[System::UserName] + " on Machine>>> " + @[System::MachineName] + " Errors reported to ERRORS_COURSE_CLASS_STATUS_T: " + (DT_WSTR, 50) @[User::ErrorCourseClassStatus]
Thanks
Does anyone have any step by step instructions for how to send smtp mail from SQL?
I guess I can use xp_cmdshell to run a vb script or something but I have no clue besides that as to what's involved.
Hope someone can help.
Deirdre
Has anyone ever set up sql mail through smtp. I am trying to automate my server and not having to much success as i cannot use exchange for company reasons. I understand that i am able to set this up through outlook and not outlook express.
this is what i have tried to do:
1. Remove any MAPI application (Full Outlook or Microsoft Messaging from control panel). It is important that there are no mapi profiles on the server.
2. Logon to the SQL server using the SQLService account
3. Check that Outlook Express is the default Mail client (done from IE/tools/Internet Options/Programs)
4. Check that there is a mail account configured, pointing to an SMTP server, say aklexch1 (just put bogus stuff in for the POP server)
5. test that you can send a message (ignoring the receive errors) from Outlook Express to your @advantagegroup.co.nz address
Only after step 5 is working should you start testing from SQL
6. In SQL Mail config you will not see any profiles in the list but just type 'Default'
7. Create an SQL Operator with an @advantagegroup.co.nz address and click the test button
nb:i am setting this up on an win2000 server.
Hi,
I want to setup a SMTP using gmail. How to configure it, it says,
In your email client software, under Outgoing mail, set the SMTP server to smtp.gmail.com.
Set the your username is yourgooglemailname@gmail.com and make sure "Use username and password" is checked.
Also check off "TLS" under "Use secure connection."
I tried to do this in code:
Dim htmlMessage As MailMessage
Dim mySmtpClient As SmtpClient
htmlMessage = New MailMessage(From, SendTo, Subject, Body)
htmlMessage.IsBodyHtml = IsBodyHTML
mySmtpClient = New SmtpClient(Server)
Dim myCred As New System.Net.NetworkCredential("myemail@gmail.com", "mypassword") 'CredentialCache
mySmtpClient.UseDefaultCredentials = False 'Credentials = System.Net.CredentialCache.DefaultNetworkCredentials
mySmtpClient.Credentials = myCred
mySmtpClient.Send(htmlMessage)
however, i cannot do the turning off of TLS in code. I'm often prompted with this error once i run:
The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.0 Must issue a STARTTLS command first
Anyone who knows how to do this?
cherriesh
I am using a unix terminal via sendmail (which i assume is compliant), I have set up mail client in outlook express called SQLService. My main issue is that no mapi profile can be located on the server and sql server agent is recieving login failed attempts when I a attempt to start it! any ideas
------------
Damien Harris at 1/25/01 7:29:49 PM
Can anyone adivise me with setting up mail in SQL 7. Unfortunatly I am unable to use the usual mail client for security reasons, thus I am attempting to use a mail account through express specifying a smtp address. I keep recieving Mapi and logon errors when starting mail and service manager.
Can anyone help! thanks
--------------------------------------------------------------------------------
Has anyone got deatils on how to go about setting up sql through an smtp client. I am unable to configure the automation service through outlook express as I understand that it is not supported. I am using a unix terminal via sendmail (which i assume is compliant), I have set up mail client in outlook express called SQLService (service account) and an exchange account. My main issue is that no mapi profile can be located in SQL mail and sql server agent is recieving login failed attempts when I attempt to start it! Can anyone adivise me with setting up mail in SQL 7
I keep recieving Mapi and logon errors when starting mail and service manager. I have also tried using a internet mail account which has not worked either. I have been told that sql mail should have a default mail client that I have specified as the SQL service account. Any feedback or advise in this area would be extremley helpful as I am stumped at the moment.
Hi,
I have RS 2000 running on windows 2003 server. I want user to subscribe to reports and receive reports via email. Initially SMTP was not installed for IIS 6.0, so I installed it and the right way (I had done it on different machine before and was succefull in that) but on this particular machines ...I don't see "Default SMTP Virtual Server" node when I open IIS manager.
This is the third day I am working on this issue ..please help me out guys,
prashant
I am running a SSIS package under a trusted account and I am running into a problem when I am executing a email task. The error is an operation timeout which was reported in the log. I am using windows authentication on the connection manager. Other email task configured the exact same way run correctly in the same run. Also when I execute task from BIDS the email is sent. Is there a bug in SSIS which would cause this behavior or some kind of exchange server configuration issue? Any help would be appreciated. Thanks, Greg
View 5 Replies View RelatedHow can I send an email from sql server.
I tried the following code which gives me no errors but doesn't send the email.
Code:
CREATE Procedure sp_SMTPMail@SenderName varchar(100),@SenderAddress varchar(100),@RecipientName varchar(100),@RecipientAddress varchar(100),@Subject varchar(200),@Body varchar(8000)ASSET nocount ondeclare @oMail int --Object referencedeclare @resultcode intEXEC @resultcode = sp_OACreate 'CDONTS.NewMail', @oMail OUTif @resultcode = 0BEGINEXEC @resultcode = sp_OASetProperty @oMail, 'From', @SenderAddressEXEC @resultcode = sp_OASetProperty @oMail, 'To', @RecipientAddressEXEC @resultcode = sp_OASetProperty @oMail, 'Subject', @SubjectEXEC @resultcode = sp_OASetProperty @oMail, 'Body', @BodyEXEC @resultcode = sp_OAMethod @oMail, 'Send', NULLEXEC sp_OADestroy @oMailENDSET nocount off GO
GO
Can anyone recommend a solution to send email from sql server?
Hello All,
Hopefully someone out there will have an idea as this is driving me nuts.
I want to send a dynamic files in attachment files ny send mail task that file name has change follow datetime.
I try to use the expression but I can't use it.
please tell me for this problem.
Any suggestions appreciated,
Thanks.
I have to send mail with HTML format and attaching multiple files dynamically via send mail task.
View 10 Replies View RelatedHi,
I have a requirement of sending mail through SQL Server through SMTP port... But, I dont want to configure my database server as e-mail client...
Is there any way to do it...
Thanks in advance...