Hi All,
I have created a table using VIEWS in SQL server 2005, now i want to be ablle to edit it in a datagrid but i cannot do so as i there is no primary key!
now does anybody know how to set a primary key constraint so i can set one of the fields as a primary key to identify the row?
many thanks
Hi there,
When the distribution agent runs trying to apply the snapshot at the subscriber I get the following error message
Message
2006-06-24 12:41:59.216 Category:NULL
Source: Microsoft SQL Native Client
Number:
Message: Batch send failed
2006-06-24 12:41:59.216 Category:NULL
Source: Microsoft SQL Native Client
Number: 2627
Message: Violation of PRIMARY KEY constraint 'MSHREPL_1_PK'. Cannot insert duplicate key in object 'dbo.ITEMTRANSLATION'.
2006-06-24 12:41:59.216 Category:NULL
Source:
Number: 20253
What could possibly cause this error? And how can I possibly fix it?
Best regards,
JB
Dear all,
In my current database design, there is one table (PState) which has a Primary Key (int) and a few other fields.
During development, a pattern started to arise; for certain rows in PState, I wanted to specify an additional set of columns (over 10 of them with quite large lengths) for each row in PState. However, as these additional columns would only be required in approximately 20% of the rows of PState, there would be plenty of NULL values in PState if I would make this table wider than necessary. So, I decided to create a separate table with those optional columns (PStateWFI). In order to attach these additional columns in PStateWFI to PState in the cases they were needed, I would obviously have to create a Foreign Key constraint on the Primary Key of PStateWFI so that these optional rows would know which row in PState they would belong to.
However, the problem with this approach is that one could define multiple rows in PStateWFI referring to the same row in PState, which would not make sense. Thus, a UNIQUE index constraint added to the constrained ID column in PStateWFI would make sense to ensure that there could only be one set of optional columns added to each row in PState. But now, when adding the UNIQUE index, the FK constraint started to appear as a bidirectional key link in the Diagram; hence, new entries in PState would have to meet a FK constraint based on PStateWFI, which was not intended.
Hence, I had to create a quite awkward design to enforce the constraints:
1. The PState table has a Primary Key (PState.ParticleID, int, Identity Specification: Yes)
2. The PStateWFI table has a Primary Key (PstateWFIID, int, Identity Specification: Yes)
3. PStateWFI has field "PStateID" which has a FK constraint to PState.ParticleID (which is a one-way constraint operating in the correct way and does not constrain insertions in PState)
4. PStateWFI has an additional column ParticleIDIndex which has a UNIQUE Index attached to it.
5. There is a check constraint on PStateWFI enforcing PStateWFI.ParticleIDIndex = PStateWFI.ParticleID.
Although this structure does the job, it makes it necessary to add a redundant column in PStateWFI by duplicating the PStateWFI.ParticleID into PStateWFI.ParticleIDIndex, since I can't create a UNIQUE index on PStateWFI.ParticleID without constraining the PState table as well. So, insertions into this table would have to insert the same value into two columns. Not a big deal, but appears slightly ugly.
Basically I'd hope someone could explain why a bidirectional FK constraint has to be enforced on the primary key table in a relationship when the constrained column in the primary key table has a UNIQUE index attached on it. I have a few other cases where the above approach would benefit from a more clear structure.
Thanks in advance for any advice.
Hi,
I am trying to insert into a table. I got the above error message then I deleted all the data in the table. But I am still getting this error.
Whats wrong?
Hello,
I am getting the following message when I am trying to insert into my table. Request is the primary keys and the Bus_Req_Id and Test_Case_Id are both foreign keys. The data that is being inserted into these fields are not unique.
This is the exact error message:
Violation of PRIMARY KEY constraint 'PK_REQUEST_BUS_REQ_TST'. Cannot insert duplicate key in object 'REQUEST_BUS_REQ_TST'.
The statement has been terminated.
I am trying to insert 700 - 900 rows based on certain criteria. If I delete the keys the inserts will work.
Any help would be most greatful.
Thank you in advance
Anne
I know what this error means is that you can not insert duplicate primary keys in the table but the thing is I am checking the rows if they do not exist then insert otherwise don't do any thing these are the lines I am writing in my strored procedure can someone please let me know what I am doing wrong here.
If not exists
(Select * From GGP WHERE
FFECTIVE_DATE =@v_EFFECTIVE_DATE AND
ASSET_ID= @v_ASSET_ID AND
ASSET_TYPE = @v_ASSET_TYPE AND
Value = @v_Value AND
hour = @v_Hour)
INSERT INTO GGP
(ASSET_ID,ASSET_TYPE,Hour,Value,EFFECTIVE_DATE) values(@v_ASSET_ID,@v_ASSET_TYPE,@v_Hour,@v_Value, @v_EFFECTIVE_DATE)
The exact error is
Violation of PRIMARY KEY constraint 'PK_SP_GGP'. Cannot insert duplicate key in object
Thanks in advance.
When I try to insert data into a table (let's just call it MyTable for this post), I suddenly get the following error.
Violation of PRIMARY KEY constraint 'PK_MyTable'. Cannot insert duplicate key in object 'MyTable'.
My table does have a primary key field named 'id', which is an auto-incrementing BIGINT. The last record I successfully inserted received 14 in the id field, so I'm assuming the database is trying to assign 15 to the next. Unfortunately, there is already a record with an id of 15; the next available id is 21.
Is there a way to avoid these primary key collisions?
Hi All,
I have a table that has 3 columns, two of them make a composite primary key. The table is populated with data. What I need to do is to add a third column to a composite primary key. I have tried to do that with the following command:
alter table databasesize
add constraint pk_dbsize primary key (dbid)
But I get the error message:
Table 'databasesize' already has a primary key defined on it.
How can I do this?
I have an odd problem on something that used to work fine.
I have an SP that inserts a record into a table (Contract) with two keyed fields.
The keys are as follows:
ContractID and SeqID (Sequence)
These two keys make the records unique.
Ex:
ContractID SeqID
12345 1
12345 2
12345 3
etc....
Several weeks of using this procedure have been fine. Suddenly I started getting this error:
Violation of PRIMARY KEY constraint 'PK_contract'. Cannot insert duplicate key in object 'Contract'.
The statement has been terminated.
I verified that the values do not violate the constraints. In fact, I can type the exact information into the table directly without a problem.
Has anybody experienced this before?
Any help would be apprciated!
Here is the code in the SP;
CREATE PROCEDURE bcipNewContractSeq @ContractID Char(10 )AS
DECLARE @MaxSeqID int
DECLARE @NewSeqID int
SELECT @MaxSeqID = Max(SeqID) from Contract_Live..Contract WHERE ContractID = @ContractID
SET @NewSeqID = @MaxSeqID + 1
--Copy Contract info for new seq with new seqid- record has default start and end dates
INSERT INTO [Contract_Live].[dbo].[Contract] ([ContractID], [seqID], [Status], [ContractName])
SELECT @ContractID, @NewSeqID, 'In Process', ContractName
FROM [Contract_Live].[dbo].[Contract]
WHERE [Contract_Live].[dbo].[Contract] .ContractID = @ContractID
GO
I'm trying to insert records into a table and getting the below error and not sure how to resolve it:
Server: Msg 2627, Level 14, State 1, Line 1
Violation of PRIMARY KEY constraint 'PK_propertyItem'. Cannot insert duplicate key in object 'propertyItem'.
The statement has been terminated.
Violation of PRIMARY KEY constraint 'PK_tbl_others. Cannot insert duplicate key in object 'tbl_others.
The statement has been terminated.-- What does it mean i cant load the data to tbl_others
Hi allWould there be a easy way to find the column name(s) which constitutea Primary constraint for a table through navigating the systemcatalogs.I found that the PK Constraint object in syscontraints is showing thecolid = 0.TIANorman
View 2 Replies View RelatedWhen replication merge, is taking place between two servers on one particular table I keep getting violation of primary key constraint, Does anyone out there have a fix for this?
View 1 Replies View RelatedHi,
I've a set of source tables on one server and a set of destination tables on another.
When I move data from one server to next, I get an error saying "Violation of Primary Key Constraint". This happens for only one table among the 6 tables that I have. I dont understand why it throws me this error. Though theres an error for this table, the data from source table moves into this destination table.
Am I missing something?
Thanks,
Subha Fernando
Hi,
I've a set of source tables on one server and a set of destination tables on another. I'm moving this using a data flow task.
When I move data from one server to next, I get an error saying "Violation of Primary Key Constraint". This happens for only one table among the 6 tables that I have. I dont understand why it throws me this error. Though theres an error for this table, the data from source table moves into this destination table.
Am I missing something?
Thanks,
Subha Fernando
I have two tables: table 1 and table 2. The primary key of table is composite key of two collumns and table 2 is the child of parent table 1. Is it possible to create / define a foreign key constraint using a composite primary key?
View 10 Replies View RelatedWe are using web application, our server log this type error. some can help me out how to slove this type of error
4/16/2007 2:44:26 PM DECIMonitoring.DocTracking.Db:insertState [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Violation of PRIMARY KEY constraint 'idx_edcstate_p_cl_01'. Cannot insert duplicate key in object 'tbl_edc_state'. tech.deci.com:5555
4/16/2007 2:44:26 PM DECIMonitoring.DocTracking.Db:insertState [ADA.1.316] Cannot execute the SQL statement "INSERT INTO db_webmethods_support_edc.dbo.tbl_edc_state(stat_s tate_id, state_item_id, state_start_ts) VALUES (?, ?, ?)". "
(23000/2627) [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Violation of PRIMARY KEY constraint 'idx_edcstate_p_cl_01'. Cannot insert duplicate key in object 'tbl_edc_state'.
(HY000/3621) [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]The statement has been terminated."
[Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Violation of PRIMARY KEY constraint 'idx_edcstate_p_cl_01'. Cannot insert duplicate key in object 'tbl_edc_state'. tech.deci.com:5555
4/16/2007 2:44:26 PM DECIMonitoring.DocTracking.Db:insertState [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Violation of PRIMARY KEY constraint 'idx_edcstate_p_cl_01'. Cannot insert duplicate key in object 'tbl_edc_state'. tech.deci.com:5555
Got the following error when the backup was run
Executing the query "BACKUP DATABASE [msdb] TO DISK = N'd:Sql backups..." failed with the following error: "Violation of PRIMARY KEY constraint 'PK__backupse__21F79AAB7WERB85D3'. Cannot insert duplicate key in object 'dbo.backupset'. The duplicate key value is (16771).Could not insert a backup or restore history/detail record in the msdb database. This may indicate a problem with the msdb database. The backup/restore operation was still successful.
12 percent processed.
21 percent processed.
31 percent processed.
41 percent processed.
[code]...
The statement has been terminated.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Hi there,I have created a hash table. After using it, somehow the primary keyconstraint of this hash table still exist in database. Which causeerror.When I delete this constraint with Alter table Drop con....It gives no table exist error.Can anybody give any idea.Thanks in Adv.,T.S.Negi
View 2 Replies View RelatedI am running merg replication (pull) between 7 various sites and once in a while when two people update information in a table in close proximty in time, I will get a primary key violation when viewing conflicts, it's almost excluslively in one table. What is the best way to handle this error. Should I delete the entire column on the subscriber and let the publisher update the subscriber? Or should I redesing the table and primary keys? Any assistance in the matter would be greatly appreciated.
View 1 Replies View Relatedselect * from sysobjects where type = 'K'
name
------
pk_dtproperties
1 row(s) affected)
When I say - DROP CONSTRAINT pk_dtproperties
i get this error
-------------------
Server: Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'CONSTRAINT'.
NOTE:
In tables, I don't have any tables all tables i deleted but wonder from where this creature comes from,.........
Hey there :)I'm using Ruby on Rails to create a migration of a legacy database onan MS SQL Server. I'd like to name my constraints myself, such as'pk_authors', but in the cases where a table has an auto incrementedIDENTITY(1,1) id field, Rails takes over and adds the primary keyitself when creating the table.This is fine, except then the constraint gets a name like'PK__authors_384934' which is not very intuitive or easily remembered;)I'd like to just throw in an 'ALTER TABLE authors...' statement justafter that table has been created, but I'm not sure how to go aboutrenaming the auto generated constraint since the name it gets ispartially random. Is there any way to indirectly refer to theconstraint like 'RENAME PRIMARY KEY CONSTRAINT ON authors TOpk_authors' or something like that, so that I can rename theconstraint?Thanks in advance,Daniel Buus :)
View 9 Replies View RelatedHi, everyone,
I have problems to setup peer-to-peer replication. After I setup, I have an error message as below.
Violation of PRIMARY KEY constraint 'XPKSYS_SRTY_ADT'. Cannot insert duplicate key in object 'dbo.SYS_SRTY_ADT'. (Source: MSSQLServer, Error number: 2627)
Event ID 14151 in vent viewer.
Does anyone have a solution to resolve the problem?
Thanks a lot.
I have a copy of this database table and the first thing I noticed was that the Primary Key was pretty much useless and there were no sensible indexes. Every query hitting this table ended up table scanning.So I thought I would try dropping the existing Primary Key constraint and then creating a more natural key that would make data retrieval quicker (hopefully). I understand that creating a clustered index on this table is going to take a long time as ALL the data will need to be reorganised (I estimate this will take at least 1 hour). However, just dropping the existing Primary Key constraint is taking forever.I can see that the server is doing a lot of disk reading/ writing and the wait type in Activity Monitor is PAGEIOLATCH_EX.I would have thought that just dropping a primary key would not change the data in the table, just delete the associated index.
View 4 Replies View RelatedIn my SSIS package i am loading data from 1 source database to 2 targets database, both targets have same structure and datatype.
My package is working fine for 1 target database but for 2 nd database its giving error "Violation of PRIMARY KEY constraint" but where as primary key constraint is not violating .
Hi,
I want to know which table my foreign is reference to
for instance I have this statement
ALTER TABLE BANK ADD CONSTRAINT BANKING_R_154 FOREIGN KEY (
COM_CODE ,
ACCOUNT_CODE ) references BANK_GLT
I want execute ine select * from information_schema.I_don't_know
to get the table BANK_GLT from constraint BANKING_R_154
How can I do this?
cheers,
Alessandro
Cannot find an answer to this in previous posting, though there are similar topics.
My primary key "ID" requires a value (is not nullable), and not explictly providing it with one when I update a new record gives the following error:
Cannot insert the value NULL into column 'ID', table 'AdClub.mediaq.News'; column does not allow nulls. INSERT fails.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot insert the value NULL into column 'ID', table 'AdClub.mediaq.News'; column does not allow nulls. INSERT fails.
However, trying to stuff that field with a recordCount+1 value (or any value), I get this error:
Violation of PRIMARY KEY constraint 'Primary Key'. Cannot insert duplicate key in object 'News'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Violation of PRIMARY KEY constraint 'Primary Key'. Cannot insert duplicate key in object 'News'.
Cannot figure this one out. The value I'm providing for that field is known to be unique, but the SQL Server spits it out each time.
Is there a way to have the ID primary field automatically update with a new value when a new record is generated? This is how I used to do it in Access, but cannot find a similar feature in SQL Server. I'm sure I'm missing something simple, but right now I'm stuck in this "Catch-22" situation.
Please help!
I have created a SQL view of several tables, and need to add either a primary key or a constraint to this view. I need it for some full text indexing that will be performed on the view. How do I do it?
Thanks in advance :)
the point here that i have a small table with two fileds,
ID (guid) as primerykey
RAF(char)
and the table is empty when i add a new row i recieve this exception,
Violation of PRIMARY KEY constraint 'PK_tblType'. Cannot insert duplicate key in object 'dbo.tblType'.
i found no way to solve the problem.
thanks in advans
I want to set up a simple check constraint on a column limiting to values "Yes", "No" and ""I'm trying to use:CONSTRAINT IsAccessToItRestricted_ckcheck (IsAccessToItRestricted in('Yes,'No','');but this is not the right syntax.............. help!
View 1 Replies View RelatedI was trying to enter a constraint expression into the dialog box. I have three fields of the data type "bit". I want to make sure that of the three, only one equals "1". Using the documentation I found in Books Online, I attempted to use the following expression, but it would not validate.
(expert == 1 && supplier == 0 && employee == 0) || (expert == 0 && supplier == 1 && employee == 0) || (expert == 0 && supplier == 0 && employee == 1)
Can someone please assist me in getting this corrected?
- - - -
- Will -
- - - -
http://www.strohlsitedesign.com
http://www.servicerank.com/
We scheduled lot of SSIS packages on 64 bit server and most of the time they are running fine. Some times we are getting below error message on any random package. When we re-run its working fine to success. This is repeating once in a week on different packages.
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Violation of PRIMARY KEY constraint 'PK_TblObject'. Cannot insert duplicate key in object 'dbo.tblObject'."
Please let me know if you have any solutions?
I want to create a check constraint on a table but the constraint values depend upon another table column as well, now one possible way is to create a function to check the column value. But I don’t want to use the function.
Can I do this in a view if so then how can I achieve this.