How To Set Default Parameter As Select All ?
May 9, 2008I set parameter as Multipul selection.
how to set it as "Select all" by default?
Thank you!
I set parameter as Multipul selection.
how to set it as "Select all" by default?
Thank you!
I have a dataset listing distinct values for items (like 1, D10, M4, etc.) The WHERE statement in my query refers to unit IN(@Unit). I then have 2 report parameters to select 1) a date (datetime); and 2) a multivalue parameter to select one or all of the "units". I would like the second parameter to default to "Select All". Can someone tell me how to do this? I'm sure this is a fairly simple thing but I am really struggling. The report parameter is set as multivalue; My "available values" is set to "from query" and refers to my "unit" dataset and the value and label fields are set to "unit" (only field I bring into this particular dataset). The "Default Values" section is set to "from query" , the dataset is set to "unit" and the value is set to "unit". I can preview the report and select a date but the list of units comes up with all boxes unchecked, including "Select All". Any help will be much appreciated. Thanks.
View 11 Replies View RelatedFriends,
I have a report which has a Multi Value Parameter. I want the default to be selected as 'Select All'. Can anyone tell how to get this?
Thanks,
S Suresh
I have a report with a dataset/parameter to select the salesperson.
SELECT DISTINCT [DatabaseName$Sales Shipment Header].[Salesperson Code], [DatabaseName$Salesperson_Purchaser].Name, 1 AS SortID
FROM [DatabaseName$Salesperson_Purchaser] RIGHT OUTER JOIN
[DatabaseName$Sales Shipment Header] ON
[DatabaseName$Salesperson_Purchaser].Code = [DatabaseName$Sales Shipment Header].[Salesperson Code]
UNION ALL
SELECT NULL AS [Salesperson Code], 'Alle salespersons' AS Name, 0 AS SortID
ORDER BY SortID, [DatabaseName$Salesperson_Purchaser].Name
In the preview mode the "All salespersons" is selected. When I deploy I see in the web user interface "<Select a Value>". The second choice is "All salespersons".
Is there a way to see "All salespersons" in the web user interface? How do I select a default value from my dataset of salespersons?
Hi!
I have the following problem:
In my report I have -among others- a multi-value parameter, populated by a query (so I cannot a priori know the content of the list).
I would like my report to start without any user choice, through default parameters, so what I need is the "select all" choice selected by default. How can I achieve this?
[The only default value I am able to pass to the multi-value parameter is one of the elements populating the list, statically writing it in the "Non-queried" section of "Default values": "From query" option seems not to work for multi-valued]
Any help will be greatly appreciated!
Thanks
Stefano
I want to remove the default value of RS Parameter (Value:"<Select a Value>") but don't know how. Is anyone here can help me out?
View 1 Replies View RelatedIs there a way to set a default value for a sp parameter using a select statement(see code bellow)
ALTER PROCEDURE psGetInformationByProduct_Andrei
@col1 int,
SELECT @top = COUNT(col1) FROM Event
Hi everyone,
I have created a stored procedure in sql server with parameters for my c# application. Wanted to know is there anyway to set the default value for @searchpostcode to select all the records?
Right now it brings the records based on the postcode specified .(I have dropdownlist in my c# application that passes the parameters for postcode)
My stored procedure:
CREATE PROCEDURE sp_accepting_practice (@searchpostcode as nvarchar(100)) AS
SELECT dbo.tbdentists.Title, dbo.tbdentists.FirstName, dbo.tbdentists.Surname, dbo.tbpractices.PracticeName, dbo.tbpractices.PracticeAddress1, dbo.tbpractices.PracticeAddress2, dbo.tbpractices.Town, dbo.tbpractices.Postcode, dbo.tbpractices.Phone, dbo.tbdentistspractices.ListNo, dbo.tbtreatment.treatmentNatureFROM dbo.tbdentists INNER JOIN dbo.tbdentistspractices ON dbo.tbdentists.DentistId = dbo.tbdentistspractices.DentistId INNER JOIN dbo.tbpractices ON dbo.tbdentistspractices.PracticeId = dbo.tbpractices.PracticeId AND dbo.tbdentistspractices.PracticeId = dbo.tbpractices.PracticeId INNER JOIN dbo.tbtreatment ON dbo.tbdentistspractices.TreatmentId = dbo.tbtreatment.treatmentIdWHERE dbo.tbpractices.Postcode LIKE '%' + @searchpostcode + '%'ORDER BY dbo.tbpractices.PracticeId
EXECUTE sp_accepting_practice G4GO
I greatly appreciate your help. Thanks in Advance
Regards
Shini
Hi, I have report parameter and its values are static lik (ABC, DEF, GHI ) etc. I want to select all as a default for this parameter. How I can do this?
View 12 Replies View RelatedHow can I set the multivalue parameter list's default option to <Select All> ?
View 2 Replies View RelatedSELECT ArticleID, ArticleTitle, ArticleDate, Published, PublishDate, PublishEndDateFROM UserArticlesWHERE (ArticleDate >= PublishDate) AND (ArticleDate <= PublishEndDate)
When I use the above on a GridView I get nothing. Using SQL manager it works great.
I don't know how to pass the value of the ArticleDate field as a default parameter or I think that's what I don't know how to do.
I am trying to create a app that I can set the dates an article will appear on a page and then go away depending on the date.
Thanks for any help!
@pvColumnName  VARCHAR(100) = Default,  
However, I am unable to determine what is the value for Default. Is it '' ?
Default is not permitted as a constant - below fails to parse:
WHERE t2.TABLE_TYPE = 'BASE TABLE'
AND (@pvColumnName = Default OR t1.[COLUMN_NAME] Like @vColumnName)
Hi,
I need "conditional" cascading parameters: In Report Manager when one changes parameter 1, parameter 2 get changed based on parameter 1. Optionally, one can also enter values to parameter 2 directly.
I was able to achieve this in SSRS 2000 (SP2) with the following setups. SSRS 2005 and SP1 no longer works - Parameter 2 always shows its default value regardless whether one select a value in Parameter 1 or not.
Parameter 1
available values: from query
default values: non query (specify a value "<None>")
Parameter 2
available values: Non query (no value specified)
default values: from query (based on Parameter 1)
It seems to me that the default value in SSRS 2000 is considered as cascading parameter. But it is no longer the case in SSRS 2005.
Is this a SSRS 2005 bug? is there any other work arounds or suggestions?
Thanks.
Kong
Hi,
I have parameters in my report. The user can choose the year, month and date (3 parameters).
Now I want to set default vaules for the parameters , so that the user sees the report for example for the current day without selecting the parameters. I tried to set the type of the parameters to DateTime and the default value for example for the year to "=Today().Year" . But when I execute the report an error occures . Something like : no validValue for this parameter.
My Attributes for the year month and date are from an Analyis Services Cube from a Server Time dimension .
Does somebody know how to make it possible to set default values for this parameters?
Other question :
Does somebody know how I can reduce the values for a parameter. For Example I have a parameter "year" from a server time dimension from a cube. The values which are available are "Year 2004", "Year 2005", "Year 2006", "Year 2007".
But I want that the user only can choose "Year 2006" or "Year 2007" ant not every Year or "All".
Or Other Example: The User should only choose a Date that is int the past or Today but not a Date in the future.
Thanks !
JF
I want to set the default parameters for a function. I;d like to set the date start date to current date and end date for the last 90 days. how to make this work?
Create Function HR.Equipment
(
@startdate Date =(Convert(Date,DATEADD(DAY,-1,GETDATE())),
@enddate Date = (Convert(Date,@StartDate-90)
)
RETURNS TABLE AS RETURN
(
SELECT
EquipID,
EmpName,
IssueDate
FROM HR.Equipment
WHERE IssueDate <=@StartDate and IssueDate >=@EndDate
)
GO
I'm using a stored procedure that receives one parameter namely @EmployeeID INT
but when I want to give this parameter a default value, my SP fails.
I did it like with a varchar where it works.
---
@Employee INT = '%'
---
Is this correct or did I use a wrong syntac/wildcard?
Greetings,
Geoff
Hi
I have a report parameter that may contain one item or it may contain more than one item. Is there a way I can default the parameter if it contains one item, to that item. But have no default if there is more than one option?
Cheers
Hi... need to default the customerId on a sub form.
Insert string is:
InsertCommand="INSERT INTO CustomerNotes(Note, CustomerID) VALUES (@Note,@KEY)"
Parameter:
<asp:Parameter Name="KEY" DefaultValue='123456789'/>
Need to make the '123456789' the value of the request.querystring('ID")
How is this done?
Thanks in advance....
in a StoredProc I want depending on whether a parameter is passed formulate the Where clause accordingly.
If parameter IS NOT NULL
THEN take all Rows
Else take the row with the ID (INTEGER)
How do I formulate the where clause?
I am using a query to grab information about the parameters of stored procedures. I am trying to determine if a parameter has a default value. I have tried adding a default value to the parameter of the stored procedure, but the returned value of params.has_default_value stays at zero. What is going on?
Here's the query to pull the stored procedure information:
SELECTprocs.name as ProcName,
params.name as ParameterName,
types.name as ParamType,
params.max_length,
params.precision,
params.scale,
params.is_output,
params.has_default_value
FROMsys.procedures procs
LEFT OUTER JOINsys.all_parameters params
ONprocs.object_id = params.object_id
LEFT OUTER JOINsys.types types
ONparams.system_type_id = types.system_type_id
ANDparams.user_type_id = types.user_type_id
WHEREprocs.is_ms_shipped = 0
ANDprocs.name = 'webservices_BENEFICIAL_USES_DM_SELECT'
ORDER BYprocname,
params.parameter_id
Here's the stored procedure:
ALTER PROCEDURE [dbo].[webservices_BENEFICIAL_USES_DM_SELECT]
-- Add the parameters for the stored procedure here
@DISPOSAL_AREA_NAME DISPOSAL_AREA_NAME_TYPE = 'a'
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
IF @DISPOSAL_AREA_NAME IS NULL
BEGIN
SELECT*
FROMBENEFICIAL_USES_DM
END
ELSE
BEGIN
SELECT*
FROMBENEFICIAL_USES_DM
WHEREDISPOSAL_AREA_NAME = @DISPOSAL_AREA_NAME
END
END
I have a report which has paramets as startdate and enddate. I want to set default value as yesterday. So when It opens it shows yesterday data.
I have a expression like this.
(DATEDIFF(dd, 0,MoneyFlowTransaction.ProcessedTime) = DATEDIFF(dd, 0, GETDATE()) - 1)
But I'm wondering how I set this as dafault value.
can anyone help me pls?
Hi everyone,
I have a report that a user can enter parameters in. If the user opens the report the parameter box is at the top and expanded. The report is also linked to by another report, so when a user clicks on something in this other report it becomes the parameter for the one I'm having the problem with. The problem is the user can select the number of days that are displayed, so when I link from the other report I just pass 10 by default, but now in the report the parameter box is collapsed and I'm worried that users won't find it. Is there a way to force it to be expanded? Sorry this is probably confusing to read.
Thank you,
Keith
Hi Folks,
I'm having a problem showing my boolean default parameter on report server in our test environment.
The report server shows my boolean parameter with a yes and no radio button. I assigned my boolean parameter with a 'No' default. The default shows and runs fine when I run the report within Visual Studio.(I hope I'm using the correct terminology.) However, on the report server the 'No' radio button is not checked by default. What am I doing wrong?
Thanks in advance for your assistance.
Hi all,
Does anybody know how to set the parameter's default value dynamically?
I'm working on a report with some parameters against datacube, and I hope the default value of one of the parameters could be set dynamically based on the user's login.
Thanks,
Jone
While converting Crystal reports to Reporting services I noticed that the existing crystal reports puts todays date as default value for the date parameter. Users also want it that way. I was unable to find a way to put a default value for a parameter in SSRS. I am a newbie in this so may be I missed something.
View 1 Replies View Related
I am trying to set the default date in my datetime parameter to yesterday's date, so the user does not have to select using the datepicker calendar. I am using Visual Studio 2005.
I put the following code into the Report Parameters non-queried default values function line, but it adds the timestamp to the date.
=DateAdd(€?d€?, -(WeekDay(Now()))+1, Now())
How can I get yesterday's date to default but without the timestamp?
Thanks!
Marissa
I have two parameters for my report. For simplicity, let's say the first one is a pet and contains of a combobox with the avaliable values: "Dog", "Cat" and "Bird".
The second parameter is favourite food and contains the values "Fish", "Seed", "Sousage" and "Apples".
Each of the Pet's has a 'default' favourite food that should be selected by default when a pet is selected. So, when I select 'Cat' in the first combobox, 'Fish' is selected in the second. This works fine, by setting the default value in the second parameter to the value of a dataset (the dataset retrieves the default favourite food for the selected pet).
The problem occurs when I first select a cat, recieving 'fish' in the second parameter, and then selects 'Bird' in the first parameter. What happens is that the second parameter is NOT changed from 'Fish' into 'Seed'. I guess this is because the second parameter already has a value ('fish') so a new default value is not calculated.
So, my question is, is there any way to force a 'recalculation' of the default value of my second parameter when the first parameter is changed?
Regards Andreas Brosten
Any way to have the default value of a parameter for a multi select parameter be the first value of the query of that parameter?
View 7 Replies View RelatedI have a report with default parameters set as ' ' i.e a blank value through a query.
when i deploy this report RS2005 adds a <select a value> as the text listed in the dropdown beacuase of which it does not take my default value and no display of report.
How can I remove this text being shown.
Thanks,
Kiran.
Table-Account0
column EAIndex �BillerCode�ChainCode�PostDate�PostAmount�BalanceDate�BillBegDate�BillEndDate�BillCount�ChAmount
Table-Biller
CompanyCode�BilerCode�BillerName�UniformNo�BusCode�AcctNo�BillerInfoList
Table-DataBackup
column CompanyCode�Keepmonth
in Table-Account0 , I use this sql query to retrieve data by column PostDate-3
Select * From ZT_EAccount0 Where isNumeric(PostDate) = 1 And PostDate < Convert(varchar(10),DateAdd(Month,-3,GetDate()),112)
now , I don't won't to lock the value "-3" , the subtract value will depend on the value of colum keepmonth from table DataBackup
can you please tell me how to do ?
thank you very much
Hi,This works:CREATE PROCEDURE MyProc @Date smalldatetime = '2005-01-01'AS... But this does not CREATE PROCEDURE MyProc @Date smalldatetime = GETDATE()AS... I'm talking about sql2005. Can anyone help how to overcome this?
View 3 Replies View RelatedHi,
I want to submit db name as as default parameter when calling procedure WITHOUT using variables
Example
use master
go
create procedure get_caller_db @s sysname = DB_NAME() --produce error
as
select @s as [caller db name]
go
use mySuperDB
exec master.dbo.get_caller_db
--
caller db name
--------------
mySuperDB -- result I want
We have a report that has about five different parameters. One of the parameters is a float value and we have a default value set at 999,999,999.00 and the report parameter accepts this value. The other parameter (a string) has a default value set at 0, however it is not showing up in the textbox for that parameter. The parameter is non-queried and is just a report parameter.
When we preview the report, it is there. Once we deploy the report to the report server, it is not. Now, the development machine is using SP2, but the Report Server is still at SP1. Could this be the problem? If it is, why would the float default value display and the string default value not?
Thanks for the information.