How To Set My SQL Server Express To Remote?
Nov 17, 2006
Hallo all, i get a small problems whit my MS SQL server this problem is i can't get my remote con allow bot how can i doe it? :)
this error i get when i trying to connet from my laptop to my server
TITLE: Connect to Server
------------------------------
Cannot connect to 192.168.47.128SQLEXPRESS.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
i hob i can be helpt :)
View 4 Replies
ADVERTISEMENT
Aug 22, 2007
Hi all,
I have SQL Server Express and VB 2005 Express installed in a Microsoft Windows XP Pro PC that is a terminal PC in our office Network. My Network Administrator has granted my terminal PC for Administrator Use. I tried to do the ADO.NET 2.0-VB 2005 programming in my terminal PC and I could not get a remote connection in the Window Form Application via Window Authorization. I do not know how to make this kind of remote connection in my Network. Please help and advise.
Thanks in advance,
Scott Chang
View 6 Replies
View Related
Sep 19, 2007
Hi all,
In my office computer network system (LAN), my Windows XP Pro PC has SQL Server Express and VB 2005 Express installed and I was granted to have the Administrator priviledge to access SQL Server Express. I tried to create a SQLCLR project in my terminal PC.
1) I tried to set up a remote connection to SQL Server Express in the following way: SQL Server EXpress => SQL Server Surface Area Configuration. In the Surface Area Configuration for Service and Connection - local, I clicked on Remote Connection of Database Engine, SQLEXPRESS and I had a "dot" on "Local and remote connections" and "Using TCP/IP only". Then I clicked on "Apply" and "OK" buttons. Then I went to restart my database engine in SQL Server Management. When I went to check SQL Server 2005 Surface Area Configuration, I saw the arrow is pointing to "Service", not to "Remote Connections"!!!??? Is it right/normal? Please comment on this matter and tell me how I can have "Remote Connecton" on after I selected it.
2) After I restarted the database engine (I guess!!), I executed the following project code (copied from a book) in my VB 2005 Express:
//////////////--Form9.vb---/////////////////
mports System.Data.SqlClient
Imports System.Data
Public Class Form9
Dim cnn1 As New SqlConnection
Private Sub Form5_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'Compute top-level project folder and use it as a prefix for
'the primary data file
Dim int1 As Integer = InStr(My.Application.Info.DirectoryPath, "bin")
Dim strPath As String = Microsoft.VisualBasic.Left(My.Application.Info.DirectoryPath, int1 - 1)
Dim pdbfph As String = strPath & "northwnd.mdf"
Dim cst As String = "Data Source=.sqlexpress;" & _
"Integrated Security=SSPI;" & _
"AttachDBFileName=" & pdbfph
cnn1.ConnectionString = cst
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
'Create a command to create a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "CREATE TABLE FromExcel (" & _
"FirstName nvarchar(15), " & _
"LastName nvarchar(20), " & _
"PersonID int Not Null)"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
'Create a command to drop a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "DROP TABLE FromExcel"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
'Declare FromExcel Data Table and RowForExcel DataRow
Dim FromExcel As New DataTable
Dim RowForExcel As DataRow
FromExcel.Columns.Add("FirstName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("LastName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("PersonID", GetType(SqlTypes.SqlInt32))
'Create TextFieldParser for CSV file from spreadsheet
Dim crd1 As Microsoft.VisualBasic.FileIO.TextFieldParser
Dim strPath As String = _
Microsoft.VisualBasic.Left( _
My.Application.Info.DirectoryPath, _
InStr(My.Application.Info.DirectoryPath, "bin") - 1)
crd1 = My.Computer.FileSystem.OpenTextFieldParser _
(My.Computer.FileSystem.CombinePath(strPath, "Book1.csv"))
crd1.TextFieldType = Microsoft.VisualBasic.FileIO.FieldType.Delimited
crd1.Delimiters = New String() {","}
'Loop through rows of CSV file and populate
'RowForExcel DataRow for adding to FromExcel
'Rows collection
Dim currentRow As String()
Do Until crd1.EndOfData
Try
currentRow = crd1.ReadFields()
Dim currentField As String
Dim int1 As Integer = 1
RowForExcel = FromExcel.NewRow
For Each currentField In currentRow
Select Case int1
Case 1
RowForExcel("FirstName") = currentField
Case 2
RowForExcel("LastName") = currentField
Case 3
RowForExcel("PersonID") = CInt(currentField)
End Select
int1 += 1
Next
int1 = 1
FromExcel.Rows.Add(RowForExcel)
RowForExcel = FromExcel.NewRow
Catch ex As Microsoft.VisualBasic.FileIO.MalformedLineException
MsgBox("Line " & ex.Message & _
"is not valid and will be skipped.")
End Try
Loop
'Invoke the WriteToServer method fo the sqc1 SqlBulkCopy
'object to populate FromExcel table in the database with
'the FromExcel DataTable in the project
Try
cnn1.Open()
Using sqc1 As SqlBulkCopy = New SqlBulkCopy(cnn1)
sqc1.DestinationTableName = "dbo.FromExcel"
sqc1.WriteToServer(FromExcel)
End Using
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
'Read the FromExcel table and display results in
'a message box
Dim strQuery As String = "SELECT * " & _
"FROM dbo.FromExcel "
Dim str1 As String = ""
Dim cmd1 As New SqlCommand(strQuery, cnn1)
cnn1.Open()
Dim rdr1 As SqlDataReader
rdr1 = cmd1.ExecuteReader()
Try
While rdr1.Read()
str1 += rdr1.GetString(0) & ", " & _
rdr1.GetString(1) & ", " & _
rdr1.GetSqlInt32(2).ToString & ControlChars.CrLf
End While
Finally
rdr1.Close()
cnn1.Close()
End Try
MessageBox.Show(str1, "FromExcel")
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////
I got the following error messages:
SecurityException was unhandled
Request for the permission of type 'System. Security. Permissions.FileIOPermission,mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'failed that is pointing to the code statement "Dim int1 As Integer = InStr (My.Application.Info.DirectoryPath, "bin")."
Troubleshooting tips:
Store application data in isolated storage.
When deploying an Office solution, check to make sure you have fulfilled all necessary requirments.
Use a certificate to obtain the required permission(s).
If an assembly implementing the custom security references other assemblies, add the referenced assemblies to the full trust assembly list.
Get general help for the exception.
I am a new Microsoft VS.NET Express user to do the SQL Server 2005 Express and VB 2005 Express programming by using the example of a tutorial book. Please help and tell me what is wrong in my SQLCLR sep-up and project coding and how to correct the problems.
Many Thanks in advance,
Scott Chang
View 3 Replies
View Related
Sep 13, 2006
HiIm trying to connect Visual Basic Express 2005 to a remote SQL Server Express 2005. I cant find how i can do that in VB.net Express.In Web developer there are no problem to connect to a remote SQL server but i cant find it in VB.net Express. The XP with the SQL server that i want to connect to is on the local network. Greatful for help!
View 1 Replies
View Related
Jul 30, 2007
Dear All,I have TWO PCs, one of them having SQL Server 2005 Expressi get sure the TCP is enables , Active, Remote conneciton is enabled via TCP onlyfrom VS2005 (C#) i can add new sqlconnection contorl and configure it with any of the installed DBsbut when i got to the Other PC with VS2005 as well, i can't configure itall i can do is to see the server inthe server list.. but NO databases are retieved at all in the Select database drop down menu any solution or suggestion
View 1 Replies
View Related
May 6, 2006
I have installed SQL server 2005 express on my main server.
It has been installed with windows authentication.
I can use sqlcmd -S machinenameinstancename to connect to the server, but when I try to connect from another machine on my lan, I get the error about user not part of trusted sql connection msg 18452 level 14 state 1
I have tried using a windows username and password from my server to access it but that fails also.
Any help would be appreciated
View 1 Replies
View Related
Jul 25, 2006
Hi ,
After reading the SQLexpress weblog , I tried the solution and its still not working
http://blogs.msdn.com/sqlexpress/archive/2005/05/05/415084.aspx
The client computer gives me this:
Run-Time error -2147217843 (80040e4d)
Log-in failed for user "KitGuest"
The connection string in the ADO object in my testing VB6 program is:
my_connection.ConnectionString = "Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;User ID=kit;Initial Catalog=AdelaideMushroom;Data Source=KITSQLEXPRESS"
I am confused with the error massage as my conncection string is set to connect on UserID = Kit
I am not sure what is gone wrong. The same VB6 program runs perfectly on host machine
I am not sure is there anything to do with SQL Config. Manager's SQL server 2005 service's Log-ON setting:
Log On as - Build-in account: Network service
could Anyone who managed to get remote connection work give me some advise?? I am desperate. have read that weblog many times and do not know how to get it work
View 4 Replies
View Related
Mar 12, 2007
Hi,
I want to make a component library in Visual Basic.NET and connect to a remote Sql Server. When I create a new DataSet with the wizard, I can only connect to a .mdf file, but not to a Sql Server. With Visual Web Developer I can connect to a Sql server. What is the difference between these enviroments ? How can I do the same with Visual Basic.NET ?
Thanks in advance.
View 1 Replies
View Related
May 3, 2007
Hi,
My Web Aplication read and write into a sql server express database. The database is in one server and the applicacion is running from my laptop.
Everything works well.
But if i publish the web in the same server that the sql server and getting the next error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
When am running the application from my laptop i am using the external IP and when I publish it in the same server i am changing the IP for the server name. The most interesting part is that the web can read but when it tries to insert is when am getting this error.
Any clue??' I can select, delete, insert using Microsoft SQl Server management Studio from my laptop, then the sql server accept remote connections.
I do not understand why the ASP.Net application works perfectly when runs from my computer but get this error when is publish in the server.
Any help will be more than appreciate.
Thanks in advance
View 8 Replies
View Related
Aug 14, 2007
hello this the message error how can I solve it thank you
View 4 Replies
View Related
Jan 7, 2008
Hi. Im trying to get a asp.net web aplication to write data to an sql express server located on another server. However when i try to connect with VS 2008 it says: "Named pipes provider, error 40: - Could not open a connection to SQL server".
What do i need to do to get this to work. Do i have to set something in the sql server, and i assume i have to open some ports in my firewall aswell?
Any help sugestions would be aprichiated
View 1 Replies
View Related
May 15, 2006
Hi,
I have installed an ASP.NET 2.0 application which uses a SQL Server Express database file on a client's network. I am able to connect to my client's network remotely over the internet. I would like to know if there's a way - and if so, how - to manage the Database file remotely.
I have VWD Express, SQL Server Manager Studio Express and a trial version of SQL Server 2005 on my development machine.
Thanks very much.
Regards
Gary
View 3 Replies
View Related
Jan 8, 2006
I am currently using a Microsoft Access (MDB) for my application. But I am looking at allowing other users on the network access the same database -- I know a Microsoft Access database is not the best solutuon for this enviroment.
I'd like to use SQL Server 2005 Express in this case. I am very fimilular with SQL Server 2000 Std/Ent editions. My question is, can I use the free SQL Server 2005 Express edition and allow remote users to connect to that database? Or is it supposed to only be used as a local database accessed by only the machine it's installed on?
Thanks,
Jason
View 7 Replies
View Related
Jan 24, 2006
Hi
have sql server express 2005 installed on a laptop running XP sp2 with IIS installed. installed sql express during the visual studio 2005 install
having problems with remote connection errors messages when using aspnet_regsql.exe as well as when trying to view pages with sql db involved. in most tests to fix this i disable my firewall, still getting error messages tho
sqlBrowser is running as is sqlexpress in services both on auto
in the surface area configuration tool, the remote connection is set to local and remote connections is using both tcp/ip and named pipes.
in sql config manager- shared memory, tcp/ip, and named pipes are enabled for both the server and the client, the order on the client is shared memory then tcp/ip then named pipes
inside the server's tcp/ip on the ip tab, IP1 is set to active, enabled, the ip address is 192.168.1.41 which is different from the laptop ip (192.168.1.39), there is no port number for IP1, should there be a port number?? dynamic port is 0
IP2 is set to active, enable with address 127.0.0.1 and also does not have a port number, dynamic port is 0
IPAll is using dynamic port 1232 but also has no port number.
for the client TCP/IP setting the default port is 1433 and it is also enabled.
also downloaded and intalled SSMS-EE and under properties for the sql server >connection, the allow remote connection box is checked. I am using the default instance sqlexpress, there is another instance microsoftbcm (what is that??) and it also has the allow remote connection box checked.
server security is set to windows authentication
keep getting
clues appreciated, take care
View 19 Replies
View Related
Jun 20, 2007
Dear All,
I am trying to connect to a remote sql server 2005. So I have install the Microsoft SQL Server Management Studio Express. When I try to connect I get the error below.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53). Can some one please help. I have even port no 1533 on my pc. Thanks.
View 5 Replies
View Related
Aug 28, 2006
Can I connect to remote SQL 2005 server through SQL Server Management Studio Express? I always get a error code 18456 when I try to connect to SQL 2005 server through SQL Server Management Studio Express. I'm sure I enter correct username and password!
View 3 Replies
View Related
Dec 31, 2005
Hi,I've an account with a hosting service provider online for SQL Server database. I've downloaded SQL Server 2005 Express from ASP.Net. How can I use it to connect to my SQL Server Database which is sitting on remote server? The hosting provider gave me following things to connect to the remote database.Server NameDatabase NameUser NamePasswordRegards,A.K.R
View 2 Replies
View Related
Sep 26, 2006
helloI have free .net 2.0 hosting with database, but without database administration tool. are there any free aspx scripts to database administration. I need to run queries and stored procedures to repair some errors in my hosted database, but i cannot use ssmsee for sqlexpress instance.thanks in advance
View 1 Replies
View Related
Jul 6, 2006
My target market includes Micro-SMEs (i.e. 1 to 2 person business). This users often have multiple computers, but tend to run XP Home edition. Hence I need to set up a SQL Server Express on one of the machines and allow the other machines to access it.
So far I realise:
XP machines must be SP2ed (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=379560&SiteID=1)
XP Home machines need to be in the same work group (am I right?)
I have to Open up the MS Firewall on each of the machines for TCP ports 1433 and 1434 (see http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=511441&SiteID=1)
On the machine hosting the SQL Server Express instance, start the "Browser" Service (again http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=511441&SiteID=1)
I have several questions surrounding this.....
If I package SQL Express with my application is there away I can get the Browser to be started automatically? Do I need to write some custom code using the Microsoft.SqlServer.Management namespace?
My understanding of the SQL Server security model is that ideally I should ideally use Windows Authenticated users connections - how do I set up the remote XP Home user on the XP Home machine which is hosting the SQL Server Instance? I'm thing I may have to used Mixed Mode and pass the SQL Server username and password in the connection string. Am I right or can I use Windows Authenticated?
Are there any more resources other than http://msdn.microsoft.com/sql/express/default.aspx?pull=/library/en-us/dnsse/html/emsqlexcustapp.asp which I should look at for help on installing an app bound to SQL Server Express?
Thanks in advance
Ben
View 4 Replies
View Related
Feb 27, 2006
I've developed an asp.net 2.0 web app with vs 2005 and am using a SQL Server 2005 Express database. The app works fine locally, but after uploading to the remote web server the following error occures:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
How do I go about granting remote connections to SQL Server Express?
Does the web server have to have SQL Server Express installed in order to run apps that utilize SQL Server 2005 Express databases?
Do I grant access locally on my machine or do I have to be on the web server to grant remote connections?
I've been using .net 1.1 with access databases for the past couple of years, so this is all new to me.
Thanks.
View 27 Replies
View Related
Jul 24, 2007
I'm using SQL Server 2005 Express, Windows XP SP2. I connect using Windows authentication.
The data source that I'm trying to hit is on a remote server. It's an OpenLink ODBC Data source, and the server is in another location. SQL Server 2005 Express and the ODBC connection are both installed/configured locally on my machine.
I can connect to the remote server. The DSN exists as a System DSN.
The DSN has its own proprietary configuration utility, which I can configure so that the server name is XPLILLEYGSQLEXPRESS. The configuration utility doesn't care; I connect successfully one way or the other.
When I open Management Studio Express, I can see my database (CMS) listed under the "Databases" folder, but there's no tables in there, other than the system tables.
So my question is, what am I missing?
Thanks
Geoff Lilley
View 1 Replies
View Related
Aug 15, 2006
Hello. I have SQLEXPRESS 2005 installed on my laptop running Windows XP Home Edition with SP2. I have an application that can connect to the local instance with no problem. The other day, I tried to configure SQLEXPRESS 2005 for a remote connection from my desktop. To date, I have been unable to figure out how to do this.
I have followed the instructions posted at various locations on the internet, but to no avail. While I can configure SQLEXPRESS 2005 to allow TCP/IP connections, I have been unable to restart the server.
Here is the pertinent snippet from the error log:
<time> Server A self-generated certificate was successfully loaded for encryption.
<time> Server Error: 26024, Severity: 16, State: 1.
2006-08-14 21:02:27.18 Server Server failed to listen on 'any' <ipv4> 0. Error: 0x277a. To proceed, notify your system administrator.
<time> Server Error: 17182, Severity: 16, State: 1.
<time> Server TDSSNIClient initialization failed with error 0x277a, status code 0xa.
<time> Server Error: 17182, Severity: 16, State: 1.
<time> Server TDSSNIClient initialization failed with error 0x277a, status code 0x1.
<time> Server Error: 17826, Severity: 18, State: 3.
<time> Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
<time> Server Error: 17120, Severity: 16, State: 1.
<time> Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I have a feeling this problem is due to the way my system is configured, not necessarily how my SQLEXPRESS 2005 is configured. My laptop and desktop are connected via a wireless router, and both machines are running Norton Anti-Virus 2006. I've added sqlserver.exe and sqlbrowser.exe to the exceptions list for the Worm protection on the laptop, i.e., the server machine. There's not a setting at the router that would prevent the server from re-starting, is there?
Any help is GREATLY appreciated!
Matt
View 15 Replies
View Related
Oct 25, 2007
Hi --- I would like a few users to be query tables, run (create ?) stored procedures, etc. on a SQL 2005 Workgroup database (the sql server is on a dedicated server)...
Will the Toolkit version (or any other version) support this?
Thanks!
View 1 Replies
View Related
May 28, 2006
Hello Everyone,
I just got a Virtual Dedicated Server and installed SQL Server Express 2005 on it and while I was installing choose Mix Mode authentication and setup a sa password.....
I want to connect to that database remotely from my machine using VS 2005 or Management Studio....both are encountering the same problems.....
On the Virtual Dedicated machine if I install management studio I run has no problem....it asks me for the server name : somethingSQLEXPRESS then username and password and works fine...
The same thing I try to do remotely is not happy with ....I tried to give the IP address of the server same thing no luck.....
Can somebody tell me what I'm doing wrong and where....
Thanks,
Harsimrat
View 1 Replies
View Related
Jun 14, 2006
Hi,
Does anyone know if it's at all possible to install SQL Server Express 2005 over a Remote Desktop on a Windows XP machine.
I know there are problems running SQL over Remote Desktop, in that it won't start up a User Instance, but I wasn't sure if we can install over Remote Desktop.
If it's not possible, can anyone point me to an official document stating this fact?
Thanks
Sam
View 3 Replies
View Related
May 3, 2006
Here is the information that I have... ( ps all information is not the actuall information )
1) URL abc.somehostingcompany.com IP: 211.11.111.1 PORT: 1433 ( NOTE: if I go to a cmd promt and type in ping abc.somehostingcompany.com I get a response )
2) dbname = mydatabase
3) userUid = sa pwd = sa
Inside SQL Server Configuration Manager --> SQL Server Network Configuration --> Protocols for SQLEXPRESS, I enabled TCP/IP and Shared Memory. Inside the properties of TCP / IP, I made sure under the "IP Address" tab that the
IP1: Active = yes
IP1: Enabled = yes
IP1: IP Address = abc.somehostingcompany.com
IP1: TCP Dynamic Ports = 0
IP1: TCP Port = < empty string >
I clicked "OK", and I stopped and started the SQL Server 2005 Services --> SQL Server (SQLEXPRESS). Then I started up SQL Server Brower.
Lastly I go to SQL Server Management Studio Express and try to connect to this remote server and database and I keep getting timeout issues and a message saying that the default settings for SQL Server Express do not allow remote connectioning by default.
Any ideas what I could be doing wrong? Should I use the port number instead of Dynamic Ports? Should I use the real IP address? Does the LOG ON AS under SQL Server (SQLEXPRESS) properties need to be updated?
Any help would be great.
Sean
View 3 Replies
View Related
Mar 6, 2006
Hi,
I'm experiencing problems connecting remotely (through the Management Studio) to a named instance of SQL Server Express 2005.
After investigation I determined it was a firewall issue - turn off windows firewall and I can connect fine. I initially added ports 1433 and 1434 to windows firewall - still no joy. Then I added the binaries explicitly (sqlservr.exe and sqlbrowsr.exe - or whatever they are) - still no joy. So, I looked into the firewall log to see what was being dropped. I found that my IP was trying to connect via port 1047 (TCP)... I've searched for anything about this on google and cannot find any indication that the management studio should be using this port to connect.
If I add this port, the connection works fine. Has anyone else experienced this ? As there seems to be no way of modifying the management studio to connect via a specific port, I'm a bit concerned that something is just not right.
I would appreciate any advice you can give.
Thanks.
View 1 Replies
View Related
Apr 25, 2006
Hi,
I am having problem with remote connection via TCP/IP connection on default port 1433. TCP/IP connection are enabled on the server.
any possible solution ?
See problem below:
TITLE: Connect to Server
------------------------------
Cannot connect to ns1.iandigroupltd.com,1433.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10060&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
View 7 Replies
View Related
Jan 28, 2008
I'M HAVING AN ISSUE, UNDERSTANDING, THE CONNECTION STRING.
I WANT TO CONNECT TO AN INSTANCE OF SQLEXPRESS ON A REMOTE SERVER WITH A FIXED IP ADDRESS
THE TCP PORT IS OPEN TO 1433
I OPENED THE PORT ON THE ROUTER AND THE WINDOWS 2003 FIREWALL
MY CODE IS AS FOLLOWS:
S = "Provider=SQLNCLI;"
S = S & "DATA SOURCE=44.66.777.888,1433SQLEXPRESS;"
S = S & "INITIAL CATALOG=TESTDB;"
S = S & "Persist Security Info=false;"
S = S & "UID=TEST999;"
S = S & "Pwd="TEST999888;"
CnMgt.ConnectionString = S
CnMgt.Open S
I'VE FOLLOWED THE STEPS OUTLINED IN ARTICLE 914277
CAN SOMEONE HELP?
THANK YOU
PS. IF THE CLIENT IS LOCAL, I HAVE NO ISSUE OPENING THE DATABASE.
I DO NEED TO OPEN THE DB FROM FROM CLIENTS.
View 5 Replies
View Related
Feb 13, 2006
Hi all,
I am using Visual web developper 2005 with sql server express 2005 and i have also sql server management studio express. it's all free now .
my web site is ready
I didn't have problem to upload my site to my hoster.
Now I want to upload all my tables and my stored procedure create locally with VWD express
How can i do it ?
NB: I know i can't design DB (create/modify tables and stored proc) with express edition
thank's for your help
View 1 Replies
View Related
Nov 26, 2007
Can VB 2005 express able to connect remote SQL 2005 express database?
I played with connection string many time and still could not success!
Thanks all.
View 1 Replies
View Related
Apr 10, 2008
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
View 3 Replies
View Related
Oct 12, 2006
I am new to VB.Net coming from a VB6 background using the VB.Net Express and have even loaded the SQL Express. The learning curve is not to bad until you get to dealing with connecting to db's. However, in trying to fill a grid with data, manipulate it and then update it has not been any fun either. There does not seem to be enough information out there dealing with these two as of right now.
Anyway, trying to add a datasource connection for a grid has resulted in a real problem even using the connection wizard. I keep getting the same error that the default settings for SQL express does not allow remote connections. However, I thought that I have corrected that. Unfortunately, with VB express I cannot even seem to talk to my SQL 2000 server either because it gives me the same exact error. I am thoroughly frustrated with it and ready to just do it in VB6.
I am open to any thoughts on this. I do not like using bound controls, except in a few situations. I would like to create it unbound if at all possible. If someone could give me some ideas as to what to do and where to go with this I would appreciate the help. I have been doing a lot of reading and a descent understanding what is needed to talk to a SQL db.
Thanks in advance.
View 6 Replies
View Related
