How To Set The Height Of The Report Body/table Dynamically
Feb 2, 2006
Hi
I have a report of 8.5"(W) by 11"(H).The header and footer size are fixed.
The header size is 4.75 in and footer size is 2.375in.
In the report body I have a table where the data is dynamic.
The problem is when the data is small i mean like 2 or 3 columns it doesnt touch the footer .
If we have more than 10 columns or so it goes to the next page and even then it doesnt touch the footer beacuse the data stops there.
If we have like 4 columns or so in the table then it touches the footer.
I tried to replace the table with the list but I got the same problem there also.
I tried to place the table in a rectangle and it has the same problem.
I want the table to touch the footer no matter how much the data is .
Is there any work around for this problem?
I really appreciate your help and time
Thanks
Hobbs
View 3 Replies
ADVERTISEMENT
Sep 30, 2007
Hi,
I have requirement to generate a Report of having more than 30 pages. I am getting an error when I am adding an object to the body. The maximum height of the body is 160 in but my requirement is more than 160in.
I do not want to use Linked Reports, because my requirement is Report should be print on the single click.
Any help?
Regards,
Subhash
View 1 Replies
View Related
Dec 5, 2007
Hi All,
I am using Sqlserver Reporting services 2005 with ASP.NET 2.0. I am using Report viewer control in ASP.NET to display the report which is generated by using Sqlserver Reporting services 2005.
Actually, when i am giving the below statement, the the report is displaying good.
<rsweb:reportviewer id="rvControl" runat="server" Width="100%" DocumentMapWidth="15%" ></rsweb:reportviewer>
But, When i am trying to give the height to the report viewer control, it displays nothing in the browser.
<rsweb:reportviewer id="rvControl" runat="server" height="100%" Width="100%" DocumentMapWidth="15%" ></rsweb:reportviewer>
What would be the problem ?
Can you help me out by resolving this problem?
Thanks in advance
View 3 Replies
View Related
Feb 12, 2007
Any body has problems using report viewer in IFrame? Here is the observation i have....when you assign the report.Height = 400px. It is assigning the report body height to be 400px. when i say report body I mean report body only!!
The report parameters section is not included in 400px. The export, print, page navigation button sections is not in 400px either!! Given such properties, when you want to show report viewer in a pre-determined IFRAME (non-scrollable) height of 500px, part of the report and horizontal report scroll bar could disappear , if the paratemeters section is more than 100px (says >2 rows or more than 4 parameters)!!
can someone tell me how to lock the height of report viewer size that will include parameters + export,print + report body? or any workaround?
View 4 Replies
View Related
Feb 6, 2008
Hello,
I was modifying some standard reports of one planning program, by downloading .rdl file from report server and creating a new report project. I have done so many times.
Last weak in one of those new reports only header of the report was seen in the report server as I thought I had made some kind of mistake tried to look for it, and after some time the problem fixed itself and I blamed everything on one mixed up connection between the tables in the report, because after removing it the problem fixed itself, but now I think that was just a coincidence.
This weak after working fine for about a weak, 6 reports appeared as only headers and footers, they worked fine yesterday and no changes were made to the reports, but in the morning only the header is seen.
The reports that are affected are the 4 new ones, and 2 original ones, they are all dealing with the same date just different grouping and sorting.
Does anyone know how to fix this problem?
Darius
View 1 Replies
View Related
May 3, 2007
Hi, all experts here,
Thanks a lot for your kind attention.
I am on the layout page, and click on the body, going to the body property dialogue, there is a size property there, I changed its width and height, but it is not changed at all? I mean once I save it, it is back to its orginal size? Why is that? Any advices for that?
Hope my question is clear.
Thanks a lot in advance for your help.
And I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
View 1 Replies
View Related
Nov 20, 2007
The gap between my report heading and the body seems unusually large, is there a way to shrink this down from what appears to be a default of over an inch? I dont see a way to slide the body upward in layout mode.
View 1 Replies
View Related
Sep 21, 2015
I have created an SSRS report containing a bar chart. The Y-axis contains some application names which are displayed based on a certain criteria. Hence sometimes there are only 2 values in y-axis while sometimes it may range upto 20 items. I have tried a lot but have been unsuccessful in getting a dynamic y-axis which changes with the number of items present.
View 2 Replies
View Related
Aug 22, 2005
I'm having problems with what is displayed in the browser being different to what is defined in the RDL and what is exported to PDF.
View 7 Replies
View Related
Oct 29, 2006
Hi,
Have you ever tried the following: change the background color of your body to any other color than white and deploy it. You will see that that body background color is still white.
I'm working on a dashboard which is black so I really need to get this working.
Any ideas?
Regards
Worf
View 2 Replies
View Related
Mar 7, 2007
Is it possible to retrieve the value of a subreport's field or control from the parent report? I'm doing some grouping in the subreport and need to retrieve the group by's data value from the subreport.
Also, is there a way to repeat the main page's body when subreport has a page break? ie you page break on some thing in the subreport and need the body and head of the parent report to repeat on subsequent pages.
Thanks,
Garick
View 3 Replies
View Related
Nov 10, 2011
In one of my SSRS report under body properties default size (width = 34.54712cm , height = 20.92853cm ). I've tried to reduce the size to width = 26cm ,height = 18 . once i changed. the width its going to the same orginal size again.
View 2 Replies
View Related
Aug 13, 2007
How do I set the maximum vertical size of a table? I would like to set it based on total vertical size in inches or a maximum number of rows returned.
Thanks for any help.
Brad
View 11 Replies
View Related
Aug 22, 2007
Hi. I have a rectangle in the page header which contains the report graphic and title. I use the rectangle's Propeties > Visibility tab > Expression, with the following code,
=IIF(Globals!PageNumber = 1, False, True)
However, on pages after page 1, the report table's height is the same as page 1 and it's positioned at the same spot as page 1 -- down about 2 inches from the top. How do I get the table's height to fill the page on pages after page 1?
Thank you.
View 3 Replies
View Related
Nov 5, 2015
I have designed a matrix report to display activities for which I added a table with in one of the cell When I run the report, I see activities but the row alignment is not proper and also when there are no records it displays blank.
View 6 Replies
View Related
May 20, 2015
We have the customer requirement to display the footer of a SSRS Report fixed at the absolute bottom of a DIN A4 format page. The footer contains information like company address and stuff.
I searched quite a while on this topic and only found workarounds for SQL Server 2005 with Custom Code in the SSRS Report to calculate the size of the body content and then insert some empty lines to get the space needed to push the footer to the bottom of the page. But this won't work in SQL Server 2012. And I wasn't able to figure out how to achieve this yet.
View 2 Replies
View Related
Feb 5, 2007
The current way I have my asp.net 2.0 web app running reports is, based on an
interface the user selects the criteria for a report. The .RDL file is created
dynamically based on the user's selections.
I then need to SOAP the dynamically created report to the report server and
then the report runs fine.
BUT it requires Adminstrative rights to do this. Can this be accomplished
without giving the local machine admin rights. I am sorry if this question
has been answered before but i have not been up here in a while.
View 1 Replies
View Related
Jun 22, 2007
Hi
I need to access value of perticular row that is populated in table component from a textbox outside table.
View 2 Replies
View Related
Oct 5, 2005
Hello everyone,
Please i need your help...
I dont know how to place the field 'strTitle and datBorrowed " in my email? Not as an attachment though....Just write it in the mail as part of message body...
I use this SQL select statement to retrieve the strTitle and datBorrowed fields
strSQL += @"Select replace(strtitle,'[Original Book] - ',''), datBorrowed from tblBooks where convert(varchar(10),datBorrowed,101) = convert(varchar(10),(getdate() - 1),101) ORDER BY strTitle asc";
Now, I have the following code to write the email
static void SendTest()
{
int iEmailLanguage = 0;
MailMessage objMail;
objMail = new MailMessage();
objMail.From = MAIL_FROM;
objMail.To =MAIL_TO;
objMail.Subject = "Books Borrowed Yesterday";
objMail.Body = Dict.GetVal(iEmailLanguage, "EMAIL_MESSAGE");
objMail.Attachments.Add(new MailAttachment(strAttachment));
SmtpMail.SmtpServer = SSMTP_SERVER;
SmtpMail.Send(objMail);
}
And the body of the email is this......
Dict.AddVal(0, "EMAIL_MESSAGE", "*** This e-mail is automatically generated. ***" +
"*** PLEASE DO NOT REPLY TO THIS E-MAIL. ***" +
"" +
"Books Borrowed Yesterday are:" +
"" +
"" +
"Thank you," +
"" +
"eLibrarian" +
"" +
"================================================== ===============" +
"" +
"This e-mail is automatically generated by the Library system." +
"Please do not reply.");
i need to put or wedge the data i got from the SQL Statement into this or after the line "Books Borrowed Yesterday are:" +
So how should i do this?
View 3 Replies
View Related
Jun 25, 2014
What I am trying to do, Extract the data from SQL table and Insert in Email Body and email to user. I got good article on Internet, I follow all steps as it is, but still I am getting error.
Here is the link : [URL] ....
But I am getting Error:
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.FormatException: Index (zero based) must be greater than or equal to zero and less than the size of the argument list.
at System.Text.StringBuilder.AppendFormat(IFormatProvider provider, String format, Object[] args)
at System.String.Format(IFormatProvider provider, String format, Object[] args)
at ST_7f59d09774914001b60a99a90809d5c5.csproj.ScriptMain.Main()
[Code] ....
View 4 Replies
View Related
Dec 13, 2006
Is there a way to dynamically rename a report? For example if I schedule a report to run every day and I want the report names to be like Report_Dec01_2006, Report_Dec02_2006, etc. This way the users can see which days data is in each of the report.
Any way to handle this?
Thx
View 1 Replies
View Related
Jan 31, 2008
Hi All,
How to assign dataset(meaning SQL Query) to a report at RunTime. Please help me in doing this it's urgent.
-SR
View 4 Replies
View Related
Apr 5, 2007
Has anyone found out how to dynamically create report width.
If I have 20 columns on a report all of 2cm, then report will be 40cm width.
If I display the columns based on specific criteria using the iif function and then setting the an expression for the Visibility Hidden property, the report could potentially reduce in width.
I cannot see how to build an expression for the report width or table width, to accommodate the potential change in the width of the report when columns are not shown, thus it pages incorrectly, leaving huge white space on the right of the report when columns are hidden... has anyone come across this requirement, and hopefully a solution for it?
Many Thanks people
View 1 Replies
View Related
Oct 23, 2007
I' m using Microsoft Reporting. Is there a way to create Report .rdlc file Dynamically on the fly? I' m using VB.net.
Any help can be appreciated.
Thanks
Mythili
View 9 Replies
View Related
Mar 10, 2008
I have a report that displays data based on the last 12 months. Is there a way I can order the columns (header and data) based on the month it was run. eg. If I were to run the report in March, I want the columns to be ordered like this:
MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC, JAN, FEB
If run the report in April, I want the columns to be ordered like this:
APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC, JAN, FEB, MAR
So, the columns in the report are always ordered (12 months backward) based on the month it was run.
View 4 Replies
View Related
Jul 27, 2015
I Need to make RDL report dynamically.Is there any library or dll that i can use?
I am Using vb.net
View 3 Replies
View Related
Mar 5, 2008
Hi,
I am wondering if someone has some experience with hiding columns in a Matrix report. I have got two details columns: "Yr to Yr Credits Growth€? and "Yr to Yr Credits Growth %" and those two columns return only one value "N/A" for the earliest year since there is nothing to compare to. Thus, I don't really need them for the earliest year. On top of detail columns, I have got three matrix groups: matrix1-Year, matrix1-Quarter and matrix-Date. Once those two detail columns are hidden, I would like obviously resize (shrink) those three matrix groups columns to reflect the fact that the detail columns were hidden.
Thanks!
View 3 Replies
View Related
Jan 26, 2007
Hi all,
Does sombody have experience on dynamically set or change the default value of a report parameter?
Assuming: report parameters p1, p2, p3, p4 have been set up(and have their default value 'all') with the creation of the report1; report browseing is through reportviewer that embedded in the web application; datasource is datacube
What I want to do: based on the login user of the my web application, set default value of p1 as the user's username.
What I did is:
Microsoft.Reporting.WebForms.ReportParameter reportParam = new Microsoft.Reporting.WebForms.ReportParameter("P1","Mary");
ReportViewer1.ServerReport.SetParameters(new Microsoft.Reporting.WebForms.ReportParameter []{ reportParam });
what I got when reveiw the report:
P1 has no default value, and p2, p3, p4 greyed and could not choose value from them.
Any idea and suggestion will be pre-appreciated!
Jone
View 1 Replies
View Related
Feb 6, 2008
Hello All,
How to assign the DataSource to Server Report which is stored in the remote machine. Now i need to work on it. If you have any solution please pass on it to me.
Thanks,
SR.
View 1 Replies
View Related
Jan 21, 2008
Hello All,
I have designed some reports and kept these reports in the report server.
My question is: I want to change report header and footer values dynamically and save the new values in the report template, when the user enters new velues in ASP.NET GUI.
Next time if the user opens the same file the report should display the recent values.
Please help me in passing the parameters from ASP.NET app to SQL Reports and saving the parameters in the report template.
Thanks,
Rao.
View 6 Replies
View Related
Oct 31, 2007
Hi all
I hope someone can help me on this issue:
I am designing dynamical reports, that are abel to run in four different languages - so far everything works just fine for me (I select my headers and labels from a database). Only problem is the prompt text for report parameters. How can I set this text dynamically?
E.g. I have a parameter where the user selects a storage - this prompt should be "Storage: " in the English report and "Lager: " in the Danish report. I have absolutely no idea how to fix this.
I am greatful for any help.
View 6 Replies
View Related
Apr 20, 2006
My problem is this: How do I dynamically generate a Report Model Definition with c#?
Is there some sort of method I could call from the ReportingService2005 web service? Or some sort of APIs I could use?
If I didn't have a dynamic database structure, I would just create a Report Model Definition with BIS and then deploy the same model to each customer. However, our product creates additional tables in the database, depending on what data users wish to collect.
There are currently 2 solutions for this problem. First, I can manually create a Report Model Definition through the Buisness Intelligence Studio (BIS). However, I wish to be able to dynamically generate the report model without having to go through BIS. Second, I could use C# and manually write the XML of the SMDL. However this seems problematic.
I'm really hoping for some MS API that I'm missing out on here. Thanks for the help.
- Sean
View 9 Replies
View Related
