Select Case l.GLTransactionTypeID
When 'Asset' --AND l.GLTransactionDate BETWEEN convert(datetime,'1/1/2007')AND convert(datetime,'12/31/2007') and l.GLTransactionSource=@assetID
Then Begin Set @Cost=l.GLtransactionAmount end
end from LedgerTransactions l,FixedAssets f where l.GLtransactionsource=f.assetID and l.GLtransactionsource= @assetID
I am trying to gather counts for table imports made for files from friday - sunday and create a variable that will be the body of an email.
I'd like to use either a case statement or a while statement since the query is the same but the values must be collected for each day (friday, saturday and sunday) and will all be included in the same email.
I have declared all variables appropriately but I will leave that section of the code out.
Select @ifiledate = iFileDate from tblTelemark where
iFileDate = CASE
WHEN iFileDate = REPLACE(CONVERT(VARCHAR(10), GETDATE()-3, 101), '/','') THEN
Select @countfri1 = Count(*) from tbl1
Select @countfri2 = Count(*) from tbl2
Select @countfri3 = Count(*) from tbl3
Select @countfri4 = Count(*) from tbl4
WHEN iFileDate = REPLACE(CONVERT(VARCHAR(10), GETDATE()-2, 101), '/','') THEN
Select @countsat1 = Count(*) from tbl1
Select @countsat2 = Count(*) from tbl2
Select @countsat3 = Count(*) from tbl3
Select @countsat4 = Count(*) from tbl4
WHEN iFileDate = REPLACE(CONVERT(VARCHAR(10), GETDATE()-1, 101), '/','') THEN
Select @countsun1 = Count(*) from tbl1
Select @countsun2 = Count(*) from tbl2
Select @countsun3 = Count(*) from tbl3
Select @countsun4 = Count(*) from tbl4
END
Is there a way to do what this that works???
Hello
I'm producing a script to output a file containing data in a required format. Part of this script requires me to change a person id field to something else for a number of people.
I can do this no problem using a script like:
CASE WHEN person_id = '12345678' THEN '24681012'
However I have about 400 people to do and don't really want a 400 line script that will take me about a week to write....!!
Is there a way of doing this passing a variable??
I have created a table (TRANSFER) containing the old ID (OLD_ID) and a field containing the new id (NEW_ID), with all the appropriate data in.
How could I use this table with a variable to get the required results?
Thank you
Is it possible to set a value to a variable if a case statement is true?
like this:
CASE
WHEN Utable.type = 2 THEN U.Username2 + (@Uname= 2)
WHEN Utable.type = 3 THEN U.Username3 + (@Uname= 3)
Ive tried above and:
"+ (select @Uname = 2)"
"+ (SET @uname = 2)"
"; SET @uname = 2"
...
and several other things but non works.
variable's = INT
"Utable.type" = INT
"U.Username"2/3 = nvarchar(50)
I have a case statement I need to refer to several times in my select statement and it's quite long. I would like to just refer to if by name. I tried to create a variable for the Case statement (see below) but I get an error that says, "
Sub query returned more than 1 value. This is not permitted when the sub query follows =, !=, <, <= , >, >= or when the sub query is used as an expression."
USE GP05
GO
DECLARE @EmpID nvarchar (6)
SET @EmpID = (SELECT CASE WHEN NOT(dbo.BE010130.EMPID_I IS NULL) THEN dbo.BE010130.EMPID_I
WHEN dbo.BE010130.EMPID_I IS NULL AND NOT(dbo.UPR00500.EMPLOYID IS NULL) AND dbo.UPR00600.EMPLOYID IS NULL THEN dbo.UPR00500.EMPLOYID
WHEN dbo.BE010130.EMPID_I IS NULL AND dbo.UPR00500.EMPLOYID IS NULL AND NOT(dbo.UPR00600.EMPLOYID IS NULL) THEN dbo.UPR00600.EMPLOYID
WHEN dbo.BE010130.EMPID_I IS NULL AND NOT(dbo.UPR00500.EMPLOYID IS NULL) AND NOT(dbo.UPR00600.EMPLOYID IS NULL) THEN dbo.UPR00500.EMPLOYID
END FROM dbo.BE010130 FULL OUTER JOIN dbo.UPR00500 ON dbo.BE010130.EMPID_I = dbo.UPR00500.EMPLOYID AND dbo.BE010130.BENEFIT = dbo.UPR00500.DEDUCTON
FULL OUTER JOIN dbo.UPR00600 ON dbo.BE010130.BENEFIT = dbo.UPR00600.BENEFIT AND dbo.BE010130.EMPID_I = dbo.UPR00600.EMPLOYID)
SELECT @EmpID
I can get around this by simply retyping the case statement when I refer to it in the where clause, but I would prefer not to do this. Can someone point a newbie in the right direction? I have 5 case statements in this query and it starts to look pretty ugly when you have to retype them multiple times.
Thanks!
Hi guys,
I have experienced problem while trying to use variable with expression based on several other variables in tasks running parallel.
The details are as following:
There is a SSIS package with simple Control flow: one Script Task which actually do nothing and two Execute Process Tasks, they run after Script Task in parallel. Then there are three simple (EvaluateAsExpression = False) string variables ServerName, Folder and JobNumber with values ServerName = €œ\test€?, Folder = €œtest€? and JobNumber = €œ12345€?. And there is one variable FullPath with expression @[User:: ServerName] + "\" + @[User::Folder] + "_" + @[User::JobNumber]. All the variables are of the Package scope. Then in Execute Process Tasks I have similar expressions based on FullPath variable: Execute Process Task 1 has expression @[User::FullPath] + "\date.bat" and Execute Process Task 2 has @[User::FullPath] + "\time.bat" one. As you understand these expressions define what exactly task should execute.
Then I€™m going to execute package from command line so appropriate XML configuration file has been created. The file contains following values for variables described above: ServerName = €œ\LiveServer€?, Folder = €œJob€? and JobNumber = €œ33091€?.
After series of consequent executions I have got following log file:
€¦ Execute Process Task 1€¦ Executing the process €œ\LiveServerJob_33091date.bat€?
€¦ Execute Process Task 2€¦ Executing the process €œ\Test est_12345 ime.bat€?
€¦ Execute Process Task 1€¦ Executing the process €œ\Test est_12345date.bat€?
€¦ Execute Process Task 2€¦ Executing the process €œ\LiveServerJob_33091 ime.bat€?
€¦ Execute Process Task 1€¦ Executing the process €œ\LiveServerJob_33091date.bat€?
€¦ Execute Process Task 2€¦ Executing the process €œ\Test est_12345 ime.bat€?
€¦ Execute Process Task 1€¦ Executing the process €œ\LiveServerJob_33091date.bat€?
€¦ Execute Process Task 2€¦ Executing the process €œ\LiveServerJob_33091 ime.bat€?
€¦
As you can see one of Execute Process Tasks usually receive correct value of the expression (based on values of variables from the configuration file) while another - incorrect one (based on €œdefault€? values of variables set directly in package). Sometimes wrong value appears in Task 1, next time in Task 2. Situations when both expressions in tasks evaluated correctly are very rare.
Then if you add some more Execute Process Tasks with similar expressions in the package (for ex. simply by copying existing tasks) you€™ll get a good chance to catch error like this:
OnError,,,Execute Process Task 1,,,8/17/2007 2:07:12 PM,8/17/2007 2:07:12 PM,-1073450774,0x,Reading the variable "User::FullPath" failed with error code 0xC0047084.
OnError,,,Execute Process Task 1,,,8/17/2007 2:07:12 PM,8/17/2007 2:07:12 PM,-1073647613,0x,The expression "@[User::FullPath] + "\time.bat"" on property "Executable" cannot be evaluated. Modify the expression to be valid.
Seems variable with expression FullPath is locked during evaluation by one of the parallel tasks in such a way that another task can€™t read it value correctly. Can someone help me with the issue? Maybe there are some options I missed which could prevent such behavior of application? Please let me know how I can make the package work correctly.
I am trying to set a vaiable from a select statement
DECLARE @VALUE_KEEP NVARCHAR(120),
@COLUMN_NAME NVARCHAR(120)
SET @COLUMN_NAME = (SELECT COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = 'CONTACTS' AND COLUMN_NAME = 'FIRSTNAME')
SET @VALUE_KEEP = (SELECT @COLUMN_NAME FROM CONTACTS WHERE CONTACT_ID = 3)
PRINT @VALUE_KEEP
PRINT @COLUMN_NAME
RESULTS
-------------------------------------------------------------------------------------------
FirstName <-----------@VALUE_KEEP
FirstName <-----------@COLUMN_NAME
SELECT @COLUMN_NAME FROM CONTACTS returns: FirstName
SELECT FirstName from Contacts returns: Brent
How do I make this select statement work using the @COLUMN_NAME variable?
Any help greatly appreciated!
Hi, i have just written this:
select distinct department = case department
when 'ict' then 'Partnership Office'
when 'finance' then 'Partnership Office'
when 'Employee Development' then 'Partnership Office'
when 'Contract Compliance & MIS' then 'Partnership Office'
when 'Quality, Standards & Effective' then 'Partnership Office'
when 'Partnership administration Exe' then 'Partnership Office'
when 'Partnership Executive' then 'Partnership Office'
when 'Personnel' then 'Partnership Office'
when 'Operations' then 'Partnership Office'
when 'Quality Standards and Effectiv' then 'Partnership Office'
when 'Marketing and Communications' then 'Partnership Office'
when 'Marketing and Information' then 'Partnership Office'
else department end from personnel_records
is there some way to do this on one line, like
...
when in ('ict','finance','personnel', etc etc) then 'Partnership Office'
else
... ?
TIA
hi, this is my procedure.
CREATE procedure yard_retrieve
(
@yard varchar(50),@vessel varchar(50),@customer varchar(50)
)
AS
begin
IF EXISTS (select code_description from codeMaster where active='1' and code_description=@yard and category_code=(select category_code from categoryMaster where category_description='Yard') )
select 'found' as result
else
select 'not found' as reault
end
begin
IF EXISTS (select code_description from codeMaster where active='1' and code_description=@vessel and category_code=(select category_code from categoryMaster where category_description='vessel'))
select 'found' as reault1
else
select 'not found' as reault1
end
begin
IF EXISTS (select code_description from codeMaster where active='1' and code_description=@customer and category_code=(select category_code from categoryMaster where category_description='customer'))
select 'found' as reault2
else
select 'not found' as reault2
end
GO
if i run this procedure i need the result as following
result result1 result2
found notfound found
is this posible to do using select case ? please help me to get my need please
I need to do the following so that I can convert a Null value to 0 in my db... however I am getting errors "Incorrect Syntax near '='.
Facilities.PortfolioID AS PortfolioID =
CaseWhen Facilities.PortfolioID = Null then Facilities.PortfolioID = 0
End,
Hi, i've got this stored procedure:
@LidFederatieNummer varchar(20),
@ClubID int,
@LidClubNummer varchar(50),
@PersoonNaam varchar(100),
@ClubStamnummer varchar(10),
@ClubNaam varchar(50),
@SeizoenID int,
@ShowAllJN bit,
@LidFederatieJN int,
@CategorieID int
AS
BEGIN
IF @CategorieID IS NOT NULL BEGIN
DECLARE @LicentieVerplicht int
SET @LicentieVerplicht = (SELECT LicentieVerplicht FROM Categorie WHERE ID = @CategorieID)
END
IF (@ShowAllJN = 0)
BEGIN
SET RowCount 100
END
CASE @LicentieVerplicht
WHEN '1' THEN
BEGIN
SELECTDISTINCT
ClubStamnummer,
ClubID,
ClubNaam,
LidID,
PersoonID,
Persoon,
LidFederatieNummer,
LidClubNummer,
vwClubLidPersoonAlgemeen.LidClubID,
vwClubLidPersoonAlgemeen.LicentieJN,
UserName,
PersoonActiefJN,
LI.SeizoenID,
LI.LidFederatieJN
FROM vwClubLidPersoonAlgemeen
INNER JOIN Persoon P ON vwClubLidPersoonAlgemeen.PersoonID = P.ID
INNER JOIN LidInschrijving LI ON LI.LidClubID = vwClubLidPersoonAlgemeen.LidClubID AND LI.ID = (SELECT TOP 1 LidInschrijving.ID FROM LidInschrijving WHERE LidInschrijving.LidClubID = vwClubLidPersoonAlgemeen.LidClubID ORDER BY ID DESC)
WHERE
LidFederatieNummer LIKE '%'+@LidFederatieNummer+'%'AND
ISNULL(LidClubNummer,'') LIKE '%'+@LidClubNummer+'%'AND
Persoon LIKE '%'+@PersoonNaam+'%'AND
ClubStamnummer LIKE @ClubStamnummer AND
ClubNaam LIKE '%' + @ClubNaam + '%' AND
(@ClubID = 0 OR ClubID = @ClubID) AND
(@SeizoenID = 0 OR vwClubLidPersoonAlgemeen.SeizoenID = @SeizoenID) AND
(@LidFederatieJN = -1 OR CAST(@LidFederatieJN as bit) = LI.LidFederatieJN) AND
vwClubLidPersoonAlgemeen.LicentieJN = 1
Order By Persoon
END
WHEN '2' THEN
BEGIN
SELECTDISTINCT
ClubStamnummer,
ClubID,
ClubNaam,
LidID,
PersoonID,
Persoon,
LidFederatieNummer,
LidClubNummer,
vwClubLidPersoonAlgemeen.LidClubID,
vwClubLidPersoonAlgemeen.LicentieJN,
UserName,
PersoonActiefJN,
LI.SeizoenID,
LI.LidFederatieJN
FROM vwClubLidPersoonAlgemeen
INNER JOIN Persoon P ON vwClubLidPersoonAlgemeen.PersoonID = P.ID
INNER JOIN LidInschrijving LI ON LI.LidClubID = vwClubLidPersoonAlgemeen.LidClubID AND LI.ID = (SELECT TOP 1 LidInschrijving.ID FROM LidInschrijving WHERE LidInschrijving.LidClubID = vwClubLidPersoonAlgemeen.LidClubID ORDER BY ID DESC)
WHERE
LidFederatieNummer LIKE '%'+@LidFederatieNummer+'%'AND
ISNULL(LidClubNummer,'') LIKE '%'+@LidClubNummer+'%'AND
Persoon LIKE '%'+@PersoonNaam+'%'AND
ClubStamnummer LIKE @ClubStamnummer AND
ClubNaam LIKE '%' + @ClubNaam + '%' AND
(@ClubID = 0 OR ClubID = @ClubID) AND
(@SeizoenID = 0 OR vwClubLidPersoonAlgemeen.SeizoenID = @SeizoenID) AND
(@LidFederatieJN = -1 OR CAST(@LidFederatieJN as bit) = LI.LidFederatieJN)
ORDER BY Persoon
END
WHEN '3' THEN
BEGIN
SELECTDISTINCT
ClubStamnummer,
ClubID,
ClubNaam,
LidID,
PersoonID,
Persoon,
LidFederatieNummer,
LidClubNummer,
vwClubLidPersoonAlgemeen.LidClubID,
vwClubLidPersoonAlgemeen.LicentieJN,
UserName,
PersoonActiefJN,
LI.SeizoenID,
LI.LidFederatieJN
FROM vwClubLidPersoonAlgemeen
INNER JOIN Persoon P ON vwClubLidPersoonAlgemeen.PersoonID = P.ID
INNER JOIN LidInschrijving LI ON LI.LidClubID = vwClubLidPersoonAlgemeen.LidClubID AND LI.ID = (SELECT TOP 1 LidInschrijving.ID FROM LidInschrijving WHERE LidInschrijving.LidClubID = vwClubLidPersoonAlgemeen.LidClubID ORDER BY ID DESC)
WHERE
LidFederatieNummer LIKE '%'+@LidFederatieNummer+'%'AND
ISNULL(LidClubNummer,'') LIKE '%'+@LidClubNummer+'%'AND
Persoon LIKE '%'+@PersoonNaam+'%'AND
ClubStamnummer LIKE @ClubStamnummer AND
ClubNaam LIKE '%' + @ClubNaam + '%' AND
(@ClubID = 0 OR ClubID = @ClubID) AND
(@SeizoenID = 0 OR vwClubLidPersoonAlgemeen.SeizoenID = @SeizoenID) AND
(@LidFederatieJN = -1 OR CAST(@LidFederatieJN as bit) = LI.LidFederatieJN) AND
vwClubLidPersoonAlgemeen.LicentieJN = 0
Order By Persoon
END
According the value of my @LicentieVerplicht variable:
DECLARE @LicentieVerplicht intSET @LicentieVerplicht = (SELECT LicentieVerplicht FROM Categorie WHERE ID = @CategorieID)
My where clausule should change... how can i achieve this cause my case is not working because it is not inside the select statement
Hi everyone,
I have the following problem withj this query:
SELECT DocNumber,
Title,FirstName,LastName,Paper,
ANNO,Location,Keywords,
URL= case WHEN URL IS NULL THEN
'|<a
href=''https://illiad.library.nova.edu/illiad/FNN/illiad.dll?ILLiadRedirect=OpenURL&genre=thesis&isbn='+CONVERT(varchar,DocNumber)+'&title='+CONVERT(varchar,Title)+'&rft.pub='+CONVERT(varchar,Program)+'&rft.edition='+
CONVERT(varchar,Paper) +'&date='+ CONVERT(varchar,ANNO)+
'&aulast=' + CONVERT(varchar,Lastname) + '&aufirst=' +
CONVERT(varchar,Firstname)+
'&url_ver=Z39.88-2004&rfr_id=info:sid/MARPS:Practicum''target=''blank'')>
Order through ILLiad</a>' ELSE URL END
FROM DocTable1 WHERE FREETEXT....
When URL is null, I don't get the string showing. It works properly only in the query analyzer.
Any ideas?
Christian
I'm using a 'searched case' however I don't care which method I use.
I'm open to using anything....
I just want to correct a problem in my pivot table where I need to create a ficticous eventdate for 'S' records, those that do not have an event date in the past 7 days.
-- eventdate is a datetime column
select User
,res =
case res --event result
when 'S' then '0' --S generic non-event
when 'SUC' then '1' --successfull event
end
,eventdate =
case eventdate
when enventdate < getdate()-8 then getdate()-8
end
from eventlog_1 --my view of events
Server: Msg 170, Level 15, State 1, Line 8
Line 8: Incorrect syntax near '<'.
TIA
JeffP...
I am doing a mail merge from data returned from a query. My problem is one of my fields is to long for the document. I want to be able to break up the line into 2 sections. I'm assuming I can do this within the case statement but am unsure how.
This is the code I have. I want the break to come before the "at".
case
when rb.building in (9420,420) then 'DEERFIELD SUMMER SCHOOL at BAKER WOODS #99'
when rb.building=9722 then 'JAMES SUMMER SCHOOL' 'at JOHN MARSHALL MS'
when rb.building=9723 then 'NORTHWEST SUMMER SCHOOL at CRISPUS ATTUCS MS'
when rb.building=9717 then 'BROAD SUMMER SCHOOL at SIDENER MS'
when rb.building=9715 then 'MANUAL SUMMER SCHOOL at MCFARLAND MS'
else upper(trim(rb.building_name)) end,
Hey guys, i'm trying to use a CASE within a select but i'm not sure how to get started.
Here is my select so far, i'm inserting into a temp table that is used within a loop to gather data from my trigger:
Code:
insert into @temp_par
select CONVERT(varchar(20),d.PAT_ID),
ep.EXT_PAT_ID,
d.DRUG_DESC_ID,
d.ALLERGY_CD,
CONVERT(varchar(20),d.PAR_DT,120),
ISNULL(d.PAR_TXT, 'NULL'),
ISNULL(REPLACE(m.DRUG_NM,'"','^"'),'NULL'),
ISNULL(m.DOSAGE_FORM_CD,'NULL'),
ISNULL(m.STRGTH,'NULL'),
ISNULL(m.STRGTH_UM,'NULL')
from deleted d --PATIENT_PRIOR_ADVERSE_REACTIONS
join EXTERNAL_PATIENT ep on ep.PAT_ID = d.PAT_ID
join MEDNAME m on m.DRUG_DESC_ID = d.DRUG_DESC_ID
I would like to use a CASE for the d.ALLERGY_CD column. The data in this column is usually a 1,2,3,4,5 but i'd like to convert those to their real data, for example:
Code:
1 = A
2 = B
3 = C
4 = D
5 = E
Any help?
Limitations: Needs to be single sql statement for exec, no udf/stored proc
Objective: select aggregate count from tblPerson grouped by s_fk, division,Desc, areaDesc with rollup for totals
if mail_goes_to=1, get the s_fk value via tblPerson/tblAffiliation/tblOrg/tblCity/tblCounty
if mail_goes_to=2, get the s_fk value via tblPerson/tblCity/tblCounty, skipping tblAffiliation/tblOrg
What's the best method? A case statement? Would a cross-join work? Thanks so much for any and all advice!
tblPerson: person_pk, affiliation_fk; home_city_fk, mail_goes_to
tblAffiliation: affiliation_pk, organization_fk
tblOrg: organization_pk, city_fk
tblCity: city_pk, county_fk
tblCounty: county_pk, s_fk
For resulting display only:
tblPersonArea: personArea_pk, area_fk, person_fk
tblArea: area_pk, areaDesc, division_fk
tblDivision: division_pk, divisionDesc
Hello !
For MS SQL 2000/2500
I am having a table ::
User
Ident int NOT NULL,
Numb int NOT NULL,
Info nvarchar(100) NOT NULL,
with this query ::
SELECT Numb, Info, Ident
FROM Users
WHERE (Numb IN (100,200, 300))
ORDER BY Ident
I get ::
Numb | Info | Ident
100 | dgwrg | 1
200 | dgeth yiuyi | 1
300 | Agt hgn ngtn | 1
100 | jttytujky | 2
200 | yjtut iuiu | 2
300 | dgd 2gggwekew | 2
what I need is something like::
SELECT
(CASE WHEN Users.Numb = 100 THEN Users.Info END) AS InfoA,
(CASE WHEN Users.Numb = 200 THEN Users.Info END) AS InfoB,
(CASE WHEN Users.Numb = 300 THEN Users.Info END) AS InfoC,
Ident
FROM Users
WHERE Ident = Ident (for the same Ident)
to get ::
InfoA | InfoB | InfoC | Ident
dgwrg | dgeth yiuyi | Agt hgn ngtn | 1
jttytujky | yjtut iuiu | dgd 2gggwekew | 2
Actually I am getting a NULL value everywhere
of course I cannot use MAX(CASE WHEN ... , or I am getting only a few rows and not all
thanks a ton for helping
OK so I want to use datepart(month,getdate() with a Case statement with this logic:
SELECT CASE
datepart(month,getdate()='8' then
SELECT *
FROM [Master]
WHERE [Month]='Jul'
END
OK what's wrong with the code?
The following code is a front end parameter - Quantity but when the user enters '0' it is not returning any rows (there are). Is there something wrong here or to add something?
(Select {?Quantity}
CASE "ALL":
1=1
CASE "Negative":
({ACBALMPK.IRQOH#}<0) OR ({ACBALMPK.IEQOH#}<0)
CASE "Zero":
({ACBALMPK.IRQOH#}=0) OR ({ACBALMPK.IEQOH#}=0)
CASE "Greater than Zero":
({ACBALMPK.IRQOH#}>0;) OR ({ACBALMPK.IEQOH#}>0;))
Hi,
I'm wondering what syntax to use for a select case statement.
I have a list of questions. If a particular question is on the list, then it shouldn't show some other related questions.
For example, "have you been in the military?". If you haven't , then you wouldn't be asked all the military related questions.
So- I'm saying:
select case when question_id = 488 then don't return question_id 220, 962, 963
I'm trying something like this:
select q.client_id,
case when q.question_id = 488 then end q.question_id = 220 else q.question_id = 220 end q.question_id
from questions_yes_no q
How would I say 'dont show' question 220? End is not the way to go, obviously.
If you can see what I'm trying to do, can you point me to an article or bol search?
Thank you for any help.
Hi,
I looked up select case statements and have used them for returning single values, but can't seem to get it working when returning a select statement..
I have my SPROC configured as below, can anyone help me out as to why its not working?
btw previously I had been using something like below, but in this case it wont work as I have to make more changes than just the WHERE genderID = @genderID (hmm, hopefully that makes sense, if not ignore my example lol)
IF @genderID > 2
..
ELSE
........WHERE genderID = @genderID
thanks very much once again!
mike123
CREATE PROCEDURE [dbo].[select_123]
(
@genderID tinyint
)
AS SET NOCOUNT ON
SELECT
CASE @genderID
WHEN 1 THEN
SELECT TOP 40 *
FROM tbl
WHERE .......
WHEN 2 THEN
SELECT TOP 40 *
FROM tbl
WHERE .......
ELSE
SELECT TOP 40 *
FROM tbl
WHERE .......
END
I'm still new to T-SQL and have been trynig to find an equivalent to VB's select case. Is the IF statement all that's available?
View 6 Replies View RelatedHello,
I have an application that at the begining a user will login with a user name and password which is stored in the database. The SQL statement is as follows:
"SELECT id_employee FROM employee WHERE employee_number='" + txtUserName.Text + "' AND passWord='" + txtPassword.Text + "'";
For testing purposes I have set the password to the word test. The problem is, if the user enters in TEST or TeSt or TESt it will grant them access. How do I set it to force the correct case?
I am using SQL 2005 for the database.
Thanks!
~zero
INSERT INTO #rpt(Hic, DtImported, Source, PlanID, LastName, FirstName, MemID, CaseStatus)
SELECT
s.Hic,
s.DtImported,
s.Source,
dbo.LastErolledPlan_C_D(s.Hic,s.IsPart_C) as PlanID,
m.LastName,
m.FirstName,
dbo.GetMemID_PartC_D(s.Hic,s.IsPart_C) as MemID,
s.CaseStatus = CASE WHEN CaseStatus ='1' or CaseStatus='0' THEN 'New'
CASE WHEN CaseStatus <>'1' or <> CaseStatus <>'0' Old
ElSE 'No Valid'
End
from tbEsccSuspects s inner join tbPDMMembers m
on s.Hic = m.HicNumber
Where s.EUFStatus = 1 -- AND DtEUFSent is NULL
what I am doing wrong in the case statment that I am getting an error. ?????
I have a select query
select col1-tbl2,col2-tbl3,col3-tbl4 ,col4-tbl1,col5-tbl1 from tbl1where condition,
The above quey col1-tbl2,col2-tbl3,col3-tbl4 are from table1 only, but it have only id(ie) the foreign key references of tables 2,3,4
I want the column with their values to join with the tables 2,3,4.
Except USING CASE
Except USING CASE
Please Guide me
Hi,I am wondering how do I write a query that will take case sensitive into consideration. For example, I have "ABCD", "abcD", ABcd", "AbCd" in a table. I want to retrieve "AbCd" only from the table. This is the sql statement that I have:sqlSelect = "SELECT * FROM [al_table] WHERE [alphabet]= @alpha"Dim selectCmd As New SqlCommand(sqlSelect, myConnection) selectCmd.Parameters.AddWithValue("@alpha", "AbCd") From what I have it will return all those value. But that is not what I want. Thanks
View 4 Replies View RelatedFor example,
select fieldA form tableA where fieldA = 'aaa'
I got following output
fieldA
---------
aaa
aAa
AAA
AAa
...
if I want select only the lower case 'aaa', how can I do that?
I need to pull one field from one table and one field from another table that is i need to pull 'eGroupName' field from 'Exception' Table and 'eGroup Description' field from 'eGroup' Table but there is no connection between these two tables means there is no forign key relationship between these two tables but i need to pull both fields . If i use INNER JOIN i need to mention relationship between both tables right? so how to write query for this , and one more thing is i need to add an extra column as "Location"which is not there in either of tables for that i need to use CASE Statement as if DataSource = 1 then "ABC" else "BCD" . pls help me out in writing SQL Statement???
is this correct ?? its showing me errors
Select Exception.eGroupName, eGroup.eGroupDescription from Exception Inner Join eGroup ON ???
(case when 'DataSource =1' then 'ABC' then 'BCD' endcase)
Where .....
Pls correct me
Thanks
DECLARE @UserEmail as Varchar(50)
DECLARE @UserZipPassword as Varchar(50)
DECLARE @CoupMember as int
DECLARE @member As Bit
--Check if Email Exists…. If yes Then
--
SELECT @RewardsMember = COUNT(*),
@member =CASE M.EMAIL
WHEN ((LEN(EMAIL)) <> 1)
THEN 1
WHEN (LEN(EMAIL)) IS NULL THEN 0
END
FROM MemberTable M
Trying to get information from table for User based on data provided. What I am trying to do up there is check to see if User provided correct Email, if User provided right password and if User provided right zip code. Basically, I need to return bit values to my client application from this. Ran into some problem with my SELECT CASE statement up there. Need help please. Thanks in Advance.
hi,friend
is it possible to use 'select case' statment in sql query.
give any idea or solution.
thanks in advance.
Hi All,
I need a hand in this script.
SELECT a.id ,value = CASE
when (x1-x0) = 0 then
((Y2-Y0)-(Y1-Y0))/(0.000000001*(X2-X0))
ELSE
((-111.48277-Y0)-(Y1-Y0))/((X1-X0)*(32.72383-X0))
END
,value2 = CASE
when (x1-x0) = 0 then
((Y2-Y0)-(Y1-Y0))/(0.000000001*(X2-X0))
ELSE
((-111.48277-Y0)-(Y1-Y0))/((X1-X0)*(32.72383-X0))
END
FROM table_name a
where value > 0
ORDER BY VALUE
The problem I'm having is in the where clause. Because the value is not a column name sql server is giving me an error. I need to evaluate the value returned. How can I get around this problem? Any sort of advise will help!
Thank you in advance!
Hi folks,
Hope you are all well.
I am using a CASE statement within a SELECT query to sum up values for different customers.
SELECT CR_CUST.Customer_Code,
'General_01' = CASE WHEN CR_PROD.Part_Class_Code = '01' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END,
'General_07' = CASE WHEN CR_PROD.Part_Class_Code = '07' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END,
'General_08' = CASE WHEN CR_PROD.Part_Class_Code = '08' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END
FROM CR_CUST
INNER JOIN CR_INVOICE ON CR_CUST.Customer_Code = CR_INVOICE.Customer_Code
INNER JOIN CR_PROD ON CR_INVOICE.Product_Code = CR_PROD.Product_Code
WHERE (CR_PROD.Part_Class_Code = 1 OR
CR_PROD.Part_Class_Code = 7 OR
CR_PROD.Part_Class_Code = 8)
GROUP BY CR_CUST.Customer_Code,
CR_PROD.Part_Class_Code
The above query produces the following results...
Customer_Code General_01 General_07 General_08
------------- ---------------- ---------------- ----------------
02210 10074.30 .00 .00
02347 7606.49 .00 .00
02210 .00 12618.42 .00
02347 .00 13131.63 .00
02210 .00 .00 4505.44
02347 .00 .00 5018.03
My question is this - is it possible to expand my SQL Query into a Sub Query so that each customers data appears on the same line of the results?, like so...
Customer_Code General_01 General_07 General_08
------------- ---------------- ---------------- ----------------
02210 10074.30 12618.42 4505.44
02347 7606.49 13131.63 5018.03
I can achieve this by writing my results into a temporary table and extracting the data with the following SQL Query, but I just thought it would be really cool if I could do it in one SQL Statement without using a temporary table.
SELECT Customer_Code,
SUM(General_01),
SUM(General_07),
SUM(General_08)
FROM #MyTempTable
GROUP BY Customer_Code
Thanks in advance,
Kev
I know I should know the answer to this, but I just can't quite get the syntax down
Code:
Select case when zipCode = '10185' Then 'Deliver'
Else when zipCode = '2309' And paid = 'Yes' Then 'Deliver'
Else When zipCode = '1291' And paid = 'Yes' Then 'Deliver'
Else When zipCode = '88221' And paid = 'No' Then 'Hold'
Else when zipCode = '34123' Then 'Deliver'
End
From postalDeliveryDatabase