Hi, All
On Northwind database in SQL Server 2000, I try to setup default value at
table design windows for "OrderDate" using GETDATE(), but it does not work.
How do I use setup GETDATE default value for date type? Thanks
Kai
Ok I have a script to generate a database, and newly added to the database is a date fild for a specfic table. I have the 'Default value or binding' set to (getdate()) how exactly would you add that to the script for then the table is initialy generated. Or is it soemthing I would need another script to do right after the table generation.This is the script for the table in question:CREATE TABLE [dbo].[cust_file] ( [id] [int] IDENTITY (1, 1) NOT NULL , [customer_id] [int] NULL , [filename] [varchar] (255) NULL , [filedata] [image] NULL , [contenttype] [varchar] (255) NULL , [length] [int] NULL, [added_date] [datetime] NULL) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]GO
Any help would be great,Tim MeersWannabe developer.
Hi all
I create table and set default value detdate(). But after insert record date display €˜1900-01-01 00:00:00€™.
Example this,
CREATE TABLE [tblTemp1] (
ItemUserDate [smalldatetime] NOT NULL CONSTRAINT [DF_tblTemp1_ItemUserDate] DEFAULT (getdate())
)
GO
INSERT INTO dbo.tblTemp1 values(0)
select ItemUserDate from dbo.tblTemp1 =€˜1900-01-01 00:00:00€™select getdate() =€™2006-07-20 15:53:27.820€™ I need this answer
GETDATE() works alone as default in a DateTime column, but:
1) How do you include current Date concatenated with text like:
- Column default Value = 'Submitted 2007-07-30 13:15:54.953'
2) is it possible to truncate that DateTime value (deleting the seconds 54.953)
- Final Column default Value = 'Submitted 2007-07-30 13:15'
Thinking Cast or convert but unsuccessful to date:
- 'Submitted ' + Cast(CHAR(16),GETDATE()) ???
Though to setup Alwayson, it is necessary to have both SQl Instances to be in same version, same database file path , etc.But, is this possible to setup the AlwaysOn between a default and a named instance?
View 1 Replies View RelatedI installed a default SQL Server 2012 instance on Windows Server 2012.I enabled the SQL Browser and changed the TCP port of the instance to 1435. I changed port 1433 to 1435 I was able to connect to the instance using SSMS on another server. Now I have to enter Servername,1435 to make a connection.Why does the SQL Browser not resolve the servername to the right IP address and port 1435? Why am I not able to make a connection when I enter the servername or <servername>MSSQLSERVER? Is a SQL Browser only resolving named instances?This works fine for a named instance. Is there something special about default instances or the SQL Browser?
View 15 Replies View RelatedHi, I want to modify the layout and stuff of the main reporting page...but I'm not sure how to open it ... is there a project for it that gets installed on the server?
I've seen some video demos on the microsoft site and they had some pretty nice front ends set up. I'd like to put some actual metrics on that front page and set up some links and different layouts.
Can someone please at least point me in the right direction to do this? I'm hoping it doesn't require setting up an entirely new site from scratch.
Thanks,
Roxanne
I have a dimension report with an attribute reporttype which have different member let say A,B,C,D....etc.
I want to set more than one default members for dimension report.
I've read all about how dimensions can have only one default member, but I need to set more than 1.
Please i need an exmple of ur solution, thanks :)
I'm using some files to show certain pages on certain date for an example
File name : aa.doc
start date: 10/02/00
end date : 10/03/00
But it expires on 10/02/00, here is the strored procedure:
Before the date comes, it expires the page
Here is my stored procedure:
"
SELECT startdate, enddate,archivedate
and (startdate is null or (getdate() >= startdate and getdate() <= enddate))
and (archivedate is null or (getdate() <= archivedate))
group by startdate, enddate order by startdate desc "
Thankx a lot
select convert(varchar(16), getdate(), 101)+LEFT(REPLACE(convert(varchar, getdate(), 108), ':', ''),4)
From above query I get
mmddyyyyhhmm
but it' s yyyy and hour can not be separated
04/12/200702:05
How can I separated the year and hour ?
Thanks
Daniel
I have XP Pro SP2 with MDAC 2.8.1022. It had a problem so I tried to reinstall MDAC and got a Fatal Setup Error. This setup does not support installing on this operating system. I downloaded MDAC 2.8 1177 and get the same error.
I thought of uninstalling/reinstalling SP2, but this is a 2 month old Dell Latitude 610 with factory installed XP. There is no Windows Service Pack 2 option listed in the Control Panel > Add/Remove Programs.
There's some other strange things, so I wonder if they are related.
1) I have Paul set up as an administrator account. Some folders like MSSQL show that account with no permissions. I grant all the permissions to Paul for that folder. I come back later and the permissions are gone.
2) I deleted 20 files in Explorer, but 7 of them did not go away. I deleted those 7 again and they instatnly reappeared. I deleted those 7 again and then they finally went away.
3) I get a slow reaction time for things like Windows Explorer and opening and closing programs. This is suprising since it has 2 gig of RAM and 2.3 Gig processor. Could it be a memory handling problem that's causing OS problems. Probably, the memory didn't handle the OS installation well and the whole system is compromised now.
We're doing upgrades from SQL 2008 R2 to SQL 2014. This is blocked due to RS is installed but not configured. Our desired action is to uninstall RS and proceed with the upgrade. But when setuparp.exe is raised, it does not list all the features on the 'Select Features' page. In fact, it only lists the last 2 shared features (SQ Client Connectivity SDK and Microsoft Sync Framework). However, all items appear to be listed on the 'Select Instance' page including RS. I've seen this issue on 2 of our SQL 2008 R2 Servers already.
View 3 Replies View RelatedI'm trying to install SQL Server Management studio 2012 on my Windows 7 (x64) standalone laptop. When I click "New SQL stand-alone installation..." it runs a Setup Support Rules check and always fails "Setup Account Privileges". I've looked into the error and I keep getting that I need to change security rules but I don't have that option in window 7. How do I get around this without having to resort to a computer running Windows Server?
I have Visual Studio 2013 premium installed along with Localdb v11. I just want to connect and manage my database engine through SSMS when developing any application.
This forum is intended for users who are new to SQL Server, and have basic usage questions. If you have setup or installation issues or questions, you should check out the Setup forum.
Thanks
I am running a number of SQL instances on my PC. Within the network, I have think server with various System Center components. For compatibility reasons, some features of System Center 2012 R2 had to be delegated to different SQL databases. My question is, because there is now more than one IP address on my system, and each instance of SQL is assigned to its own IP, is there a way to setup DNS and SQL so the namespace points to the desired IP address? For Instance:
MSSQL2008 instance is set to run on = 11.12.13.1
MSSQL2012 is set to run on = 11.12.13.2
IN DNS:
A Record: Mike-PC = 11.12.13.1
A Record: Mike-PC = 11.12.13.2
If I want to use MSSQL2008 by specifying Mike-PC as the DNS name, how would I do that with 100% accuracy? If there is another way to get the job done, I am more than willing to approach this differently.
@pvColumnName  VARCHAR(100) = Default,  
However, I am unable to determine what is the value for Default. Is it '' ?
Default is not permitted as a constant - below fails to parse:
WHERE t2.TABLE_TYPE = 'BASE TABLE'
AND (@pvColumnName = Default OR t1.[COLUMN_NAME] Like @vColumnName)
When I use the getDate() function I get something like
2005-03-09 15:13:45.017
but I don't want the time, just 2005-03-09
how do you strip out the time from the result?
Thanks
How can i getdate in C# code, like we do in SQL Server ?
Thanks.
However, when I run select getdate() in Sql 6.5 I get the following
Apr 27 2001 11:59AM
Both queries are run from the QueryIsql window.
How can I get the sql 7 version of getdate to be exactly the same as the
sql 6.5 version from the query window without resorting to usign the
convert function?
According to Sql 7 books online, getdate
"Returns the current system date and time in the Microsoft® SQL Server™ standard internal format for datetime values"
I'm facing some strange problem here:
-----------------------------------------
I'm using some files to show certain pages on certain date for an example
File name : aa.doc
start date: 10/02/00
end date : 10/03/00
But it expires on 10/02/00, here is the strored procedure:
Before the date comes, it expires the page
Here is my stored procedure:
"
SELECT startdate, enddate,archivedate
and (startdate is null or (getdate() >= startdate and getdate() <= enddate))
and (archivedate is null or (getdate() <= archivedate))
group by startdate, enddate order by startdate desc "
Thankx a lot
i am also trying to write a query that
retrieve information on yesterdays new registered
member. So far as i am concern with sqlserver you use
the getdate()-1 to retrieve this information. But the
problem i get when i try to use the getdate()-1 is
that i tend to get todays and yesterdays registered
users. Is there anywhere that i would be able to
retrieve information on just yesterdays new registered
members and also only todays new register members.
The following WHERE clause does not generate a datetime from my GETDATEs. Can anyone help me out on the syntax?
WHERE (FROMTIME = GETDATE() AND ToTime = GETDATE())
Thanks much.
TM
Is it right, that getdate() cannot be used in an user defined function. if so, then how do i get hte current date and time in my function?
View 2 Replies View RelatedHi
I know this is going to sound really daft, but what is the easiest way of getting today's date without the time? Getdate() on it's own doesn't work because it always brings out the time. I know I'm missing something really basic but I can't figure it out.
Please help.
Thanks
How to get the first and last day of the previous month using function getDate()?
View 2 Replies View RelatedG'day,
I want to display the current time minus 5 minutes. say
2004-03-29 11:43:49.123 to be 2004-03-29 11:38:49.123.
Is there any Equivalent to the DB2's CURRENT TIMESTAMP - 5 MINUTES which will display the current day say 2004-03-29 11:43:49.123 as
2004-03-29 11:38:49.123
cheers
Melb
I'm using getdate() - 74 and getting something like
2006-03-06 11:26:02.870
Is there a simple way to get
2006-03-06 00:00:00.000
instead?
Or just get the date and not the time part. I'm using this date with a between function and the time component is throwing it off.
I'm using
cast(convert(char, getdate(),112) as datetime) - 74
and it works...but there must be an easier way...
Hi,
when I used getdate() fuction, its giving the correct time in this format 10/02/2007 01:04:31 PM. But I need the time in 24 hour format. Means it should be like 10/02/2007 13:04:31.
How to get it. Please help me!!
shaji
select
H.IsoDate,
HI.Country,
HI.Center,
H.ExchangeCode,
HC.Holiday,
H.HolidayCode
from
Holidays H
join
HolidayInfo HI
on
HI.Code = H.ExchangeCode
join
HolidayCodes HC
on
H.HolidayCode = HC.Code
where
H.isodate = getdate()
This is a script but the getdate part is not working can somebody point me in the right direction where i might be going wrong.
The date format in H.isodate is like this:
2005-06-24 00:00:00.000
cheers in advance
Hello,
I'm new to SQL server and I'm trying to insert the system time into a table.
I'm using following insert statement. But I get an error 'incorrect syntax near the keyword select'
INSERT INTO today(datum) VALUES(SELECT getdate() FROM today)
The datatype of datum is Datetime
Can someone please tell me what I'm doing wrong
Thanks
I am setting up a table and I want to capture the creation date of each record when it comes in. Obviously the easy way to do this is set the dfault value of this field to getdate(), but I am wondering if there is a benefit to using an insert trigger instead?
I will also be adding a seperate updatedOn field and plan to use an update trigger to populate it. If there is a better way to do either of these please let me know.
Folks:
I use,
PRINT CONVERT(VARCHAR, GETDATE())
To write the current date to the console (for debugging purposes). Only problem is it only shows hours and minutes (not seconds). Can anyone suggest an equivalent that shows seconds as well?
Hi if i in a table using getdate then
the field get the date from the Machine this is all right
But when i use getdate in my Query then i get Zerro records Why?
Alvin