In SSIS, I put a File System Task in a Foreach Loop Container to do some file operation. I check the Traverse Subfolders in the Loop, and I want to take a look the full path name during operation. I'd like to show the full path name on a message box? How should I do?
Thanks.
Hi
I am having some problems figuring out how the SSCE database connection string is set correctly in a forms application.
I have a database file, Database1.sdf, in the main directory of the application. I can add records to that via VS server explorer no probs. When I use any of the following connection strings in app.config..
Data Source ="|DataDirectory|Database1.sdf"
Data Source =".Database1.sdf"
Data Source ="Database1.sdf"
It will databind to a gridview of a combobox fine. However, when I create a form with some textboxes, build an insert string and use any of those connection strings with "Properties.Settings.Default.Database1ConnectionString" it just does nothing. No errors, no records inserted, just nothing.
But, if I change the connection stirng to...
Data Source ="D:\path\to\my\application\directory\Database1.sdf" (Just so happens I have this application on a D drive)
It all works just fine, including the insert.
So how do I refer to the database with virtual vs. absolute path? As far as I can tell the very first connection string I used should work, and should publish with the application.
Thanks!
Basically i have 3 images capacity per record in my asp.net application. In there i am saving the image path with record id in database and image in my application folder.
Now i am creating SSRS Report in Report builder . In there i have taken one image control to show the images. In the Image properties in report builder i have chosen database under the select the image source field. then inside use this field i have chosen image url and in use this MIME Type i have selected image/jpeg. Now i have saved this report in report server folder.
Now while calling in .net web from through report viewer control. It is opening the report but wont showing the image.
I have a drill through report. I am passing multiple parameter values to my sub report using 'url'.
But I am getting error 'The full path must be less than 260 characters long'.
Hi,
Can we create full-text index on a document that resides on a file system and we have got the path to that document in the database.
Thanks and regards
Salil
Hi All,
When I check the log from EM. It sows that it is full. I increased the size of the log(expand) and still not work. I dumped the transaction logs with nolog option this also does not work. Then I run
dbcc checktable(syslogs) and still it is showing the same. When I ran the DBCC
I got the follwing message.
" Checking syslogs
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 18 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator "
Any idea how I can overcome this problem. My sql server version is 6.5.
Also in the message what is the mean that log segment is not on ots own device.
Thanks
Sandy
When trying to install Business Contact Manager (BCM) for Outlook 2007, the setup failed and I was refered to a log file in my Local Settings/Temp folder. The log actually says that Business Contact Manager was installed sucessfully! BCM is supposed to install SQL Express 2005 as an instance or as instance if SQL Express is already installed. There is an MSSMLBIZ instance in Services..
Who can I send the Log File to for analysis and the fix feedback?
When I first went into Computer Management and clicked on Services and Applications in the left panel, the error message appeared "Snap-in failed to intialize. Name: SQL Server Configuration Manager CLSID:{CA9F8727-31DF-41D2-975C-887D84903967} This message diappeared when I clicked on Services and Applications again. Under Services, there are 3 SQL services - one is an application that was uninstalled 3-4 weeks ago and I disabled this service. The other 2 are: SQL Server (MSSMLBIZ) and the other one is SQL Server (SQLEXPRESS) When I tried to start either of the last 2, the message appeared: Services "Could not start the SQL Server (MSSMLBIZ) service on Local Computer. Error 3: The system cannot find the path specified. Under Program Files/Microsoft SQL Server/MSSGL.1 folder is mostly empty. So, it seems like the Path in the Registry is not valid and that nothing is being installed in the MSSQL.1 folder. If so, how do I fix this?
How do I get the BCM SQL instance to install and run properly? what do the messages in Services mean and how do I resolve these.
Thank you!
Gary
After updating TempDB path to a wrong path (without file name only folder name) the service is not starting. How can i sovle this and start the service
thanks
Leena
Hi all,
I have two problems.
1. I downloaded ChartFXRSTrial and created one chart, and able to deploy it in ReportServer, but the problem is the reports are not showing there, i checked the configuration of .dll files in the help provided by chartFX, but couldn't get anything, so could help me on this.
2. How to give Tooltip for the X- axis or Y- axis values in the ReportServer , i tried using chartproperties of .rdl file, but didnt understand it. can help me on this, and one more i tried with Dundas too, If im giving tooltip as #valy then, it is showing samething in reportserver instead the values of 'Y-axis'.
Thanks,
Mahesh Manthena
I have sql server 2000. I copied a database from one server to another. I have one table that has a full-text index. When I transferred over the database, the index still existed, but was not populated. I made sure the path for the file is pointing to a new correct location. I did "start full population". It only populated one entry @ 1MB. On the old server the index is 100MB with more than 3 million records.
I tried rebuilding, re-creating, and it all works, but when I run "start full population", it only populates 1 record. I double checked the table in question and it has over 3 million records and proper primary key.
How do I resolve this.
Sorry if this is not the correct forum... I am using the FOR XML PATH feature of SQL Server 2005 (Amazing!!) Is it possible to return multiple rows? For example:SELECT 'Field1' AS 'Element1/@Field1'FROM TableFOR XML PATH('Repeating') Say the above SELECT returns 5 records, I want it to return 5 rows of xml in my ASP.NET application. So in this case each of the 5 rows would contain:<Repeating><Element Field1="Field1"></Element> <Repeating>Instead of returning 1 row with all the xml together.
View 2 Replies View RelatedGreetings
When using sp_xml_preparedocument @hdoc OUTPUT, @doc I see code everywhere with huge xml text embedded in some store procedures. Can the
SELECT XXX
FROM XXX
FOR XML PATH('') syntax be used instead to produce the second parameter @doc (xmltext) for sp_xml_preparedocument ?
Thanks
Hi,
Im trying to reference a ExcelFilePath connection properties using a UNC path, however it doesnt seem to like it, when i use a mapped drive everything works fine.
Can UNC paths be used in ISIS ?
Hello to all,
help, help,...
i have with this problem since 3 weeks, until now i cann't resolve this problem. Maybe can somebody help me. I am hopeless.
i have a data table ValidRelationship, i will check if there is a relationship between two members by this table.
datas in the table ValidRelationship:
IDMember IDOtherMember IDType
3700
3726
10000
3726
3700
10000
3742
3672
10000
3672
3742
10000
3422
3548
10000
3548
3422
10000
3548
3717
10000
3717
3548
10000
3675
3695
10000
3695
3675
10000
I will give two member and check their Relationship with a sql query. but it can be that this two member have no relationship. So i define here that man should search processor <= 6 . To better describe i use a example: max. Result of this query is: 1-2-3-4-5-6. If this is a relationship between 1-7 is 1-2-3-4-5-6-7, but i will give a answer that this is no relationship between 1-7. because processor > 6.
But my problem is: this query executing is too slow. if i habe two member no relationship, the time of this complete sql query to execute is more than 1 minutes. Is my algorithm wrong, or where is the problem, why this executing is so slow? How can i quickly get the relationships between two member, if my algorithms is not right? The following Query is only to processor = 3, but it works too slowly, so i don't write remaining processors.
declare @IDM int;
declare @IDO int;
set @IDM = 3418;
set @IDO = 4270
select top 1 IDMember
from v_ValidRelationships
where IDMember = @IDM
and @IDO in (select a.IDOtherMember from v_ValidRelationships as a where a.IDMember = @IDM)
select top 1 a.IDMember, b.IDMember
from v_ValidRelationships as a, v_ValidRelationships as b
where a.IDMember = @IDM
and b.IDMember in (select c.IDOtherMember from v_ValidRelationships as c where c.IDMember = @IDM)
and @IDO in (select d.IDOtherMember from v_ValidRelationships as d where d.IDMember = b.IDMember )
select top 1 a.IDMember, b.IDMember, e.IDMember
from v_ValidRelationships as a, v_ValidRelationships as b, v_ValidRelationships as e
where a.IDMember = @IDM
and b.IDMember in (select c.IDOtherMember from v_ValidRelationships as c where c.IDMember = @IDM) and e.IDMember in (select f.IDOtherMember from v_ValidRelationships as f where f.IDMember = b.IDMember)
and @IDO in (select d.IDOtherMember from v_ValidRelationships as d where d.IDMembe = e.IDMember)
If someone has a idea, please help me. Thank a million
Best Regards
Shasha
I have my SqlDataSource with my connection string:<add name="ConnectionString" connectionString="Provider=Microsoft.ACE.OLEDB.12.0;Data Source=C:UsersLaurensDesktopstockmanASP****.accdb" providerName="System.Data.OleDb"/> but I wanted to make a relative path from it because when I put it online i get an error. Thanks in advance
View 6 Replies View RelatedHey everyone,
I'm in the midst of setting up hMailServer on my server and at one point it tells me to enter the name of my database I setup for my email. I entered my database name along with the username and password to access the database. What I'm lost on is the database server address. I thought that would be localhost but I wasn't quite sure and I was hoping that someone might be able to help me with this.
Thanks for any help,
QWERTYtech
Hi,
Can we change the Path of the Tempdb.(i.e., In Tempdb's properties location).
thanks in advance.
bye,
Madhu.
I am having difficulty restoring a database (DB_1) consists of 2 datafiles and one log file, DB Structure is as following:
Filegroup PRIMARY with file name 'fnm_data' with physical file name and location D:dbfile_1.mdf,
Filegroup 'FG1' with file name 'fgnm1_data1' with physical file name and location F:dbfile_FG1.mdf,
One log file with file name 'fnm_log' with physical file name and location (E:loglog_db.ldf)
{Note} Logfile resides on E drive whereas Datafiles reside on several other drives.
I need to restore the DB on another machine. And I need to move the log file to a drive other than E.In this case it is K drive. Hence I have used the following code,
restore log DB_1 from disk='M:kupccciclog.txt'
WITH RESTRICTED_USER , MOVE 'fnm_log'
TO 'K:DBlog_db.ldf', recovery, replace,RESTART
go
When I try to restore from backup files, I keep error message saying "Physical file name E:loglog_db.ldf may be incorrect." 'fnm_log' cannot be restored. Use Move command to identify a valid location for the file.
Even though I am using Move command to move the log file.
Then I found that if I create a drive with E: and a folder named 'log' then restore program runs alright. That is, when E:log exists then code does run smoothly. All the restore code is looking for the presence of path of the log file from where it is been backed up. In this case it is E:log folder. Once the database is restored I could kill that directory and nothing happens. Also log file has been restored on K:DB only.
Why the restore code is looking for the initial drive letter and path even though I have used Move command? Is there an issue in my code?
Any help will be highly appreciated.
How do I dynamically change the file path for the source file in DTS?
Can i use global variable?. if so , How do i use it in the connection task.
Appreciate your help.
I'm having a problem with a backup job.
15 or so databases are being backed up overnight to a remote server using UNC paths. All bar one database is being copied fine. The one that isn't is the largest at 8gb. The error in the log is OS error 64 (the network name could not be found).
Now I've got the customer looking into any reasons why their network may be interrupted overnight, but while googling around I saw someone mentioned that backing up to UNC with databases over 2gb can cause problems? Is there any truth in this?
I am inclined to reccomend the user backs up the database to a local drive and then sets up a scheduled task to copy it across, but I'm interested to see if this is a known issue.
Thanks.
In the following example...
EXEC sp_addlinkedserver
@server = 'Shipping',
@provider = 'Microsoft.Jet.OLEDB.4.0',
@srvproduct = 'OLE DB Provider for Jet',
@datasrc = 'C:ShippingShipping BackEnd.mdb'
...can I specify the UNC path of the Access DB instead?
I have a question on how to change a hyperlink path. I have an ADP that has our scanned files linked to it the path is on SQL server. The problems is that we are migrating sql server and the files to their own seperate server,
\gcfs01databaseBackgroundsSCANNED ACROBAT DOCUMENTS (BACKGROUNDS)SCANNED ACTIVE FILES5630.pdf
The server is called \gcfsql Instead of gcfs01.
does anyone know how we can change the unc path to gcfsql without
\gcfsQLdatabaseBackgroundsSCANNED ACROBAT DOCUMENTS (BACKGROUNDS)SCANNED ACTIVE FILES5630.pdf
Any help would be greatly appreciated
How to find the physical path of resource db files from SSMS query?
------------------------
I think, therefore I am - Rene Descartes
I am attempting to set up SQLCE server tools on my local machine. The installation wizard requires a UNC path to the replication folder (In the NTFS Permissions: Snapshot Folder) . I have tried entering the path as:
C:foldername
\computernamefoldername
computernamefoldername
Is this possible? If so how. Please
Regards,
Joe
Hi All
I am a Software developer with around 15 months of experience in .Net 2.0 and VSTO.
I am currently working in a SQLServer 2000 project.
I feel more interest to work with database than front end coding.
Can anyone suggest what need to be done for the one to be a DBA.
Could you please provide more details on the roles and responsibilities and the scope for career development on becoming a DBA.
In what Timeline can i be a DBA. After becoming a DBA what are the career options available. Please help me out in deciding my career
Thanks in Advance,
Sidharth
Greetings,
What is the "prefer" path for moving from SQL 7 to SQL 2005? Please give me the pros and cons for: backup sql 7 and restore it onto sql 2005 vs. migrate sql 7 to sql 2005. In both cases, please give me the pit falls. Thank you.
Hi,
no results during my search of the web, maybe one of yours can help.
Is there a possibility (during design time is OK) to find out, which TaskHost is before and after a CustomTask (by wiring in ssis-designer) and which type of wire it is (Error, Finish, Success).
Maybe the order of executables is providing this information, when there are no props or methods (and i found none), but then you don't know anything about the type.
Any ideas?
Thanks
RESTORE DATABASE NewAbitaDB
FROM DISK = 'c:7augbkup.bak' WITH REPLACE,
here, instead of "c:" it has to take the current path that means where i loaded the backup file, how to find out?
Setup:
I'm using SQLCE on a VB.Net (2005) desktop applicaiton.
I have strongly typed datasets pointing to tables in the SDF.
The path to the sdf is |DataDirectory|DataQQ.sdf
Problem:
When I run my application, I have a list of context sensitive tasks that appear as buttons.
When the user steps into a control, the app retrieves a list of context tasks from the SDF and populates the buttons.
When the user pushes one of the buttons, for example "View File" the appropriate action takes place.
However, when the user enters into the next field, I get a SQLCeException telling me the path could not be found (error 25009). The Path it gives is Path = .DataQQ.sdf
It points to the task of getting data from the Context Tasks table.
The problem is, though, that it just accessed that same path and same table to populate the task list.
I've manually checked the file location in explorer as well as openning up the database in Management Studio. It exists and opens fine. But for some reason, it seems to lose the path or connection in between 2 identical calls.
I don't believe I saw this problem until after I switched TO strongly typed datasets.
Any ideas?
Hello,
I am trying to retrieve pdf(s) from our server using a UNC path. I created a textbox with the value
=Fields!DisplayLink.Value. I coded my Action property with a constant to test to see how it works in "Jump to URL" \RALEIGHPurchase179104620071017910461001070724.pdf and the pdf is not showing up. Does anyone have any ideas?
Hello,
I'm having problems using the ReportViewer control (which you can use in VS2005). When I go to the page that contains the control, the images (back, next, print, etc) don't show up and I get different javascript errors (one of them is the "RSClientController is undefined" error). After some investigation, I found out that the path to the Reserved.ReportViewerWebControl.axd file is incorrect (as I see it in the page source). On every place this axd file is used (for the images and the necessary javascript file), the path is "/Reserved.ReportViewerWebControl.axd?...", while it should be "/reportserver/Reserved.ReportViewerWebControl.axd?...". If I go directly to the "/reportserver/..." url, I can retrieve the images and javascript file. So, somewhere the path to the axd file is set in a wrong way.
For example:
<script src="/Reserved.ReportViewerWebControl.axd?OpType=Resource&Version=8.0.50727.42&Name=Scripts.ReportViewer.js" type="text/javascript"></script>
while this should be:
<script src="/ReportServer/Reserved.ReportViewerWebControl.axd?OpType=Resource&Version=8.0.50727.42&Name=Scripts.ReportViewer.js" type="text/javascript"></script>
I have included the ReportViewer control in a usercontrol (ascx). This usercontrol is implemented in Sharepoint using the "Son of Smartpart" webpart. I'm using SQL Reporting Services 2005 (with the database, SQL Server 2005, hosted on another server). Using the ReportManager, everything is fine.
I really need to get this working, but I'm out of ideas (I've been searching for days to solve this, but can't seem to find the correct solution).
Any ideas?
Sven
How do I get a CDATA section in results when using a SELECT ... FOR XML PATH? (SQL 2005 SP1)
View 8 Replies View Related
Hi
Anyone knows , get a SQL Backup Folder Path in asp.net.Some Systems it displayed like D:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackup and some Systems like E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackup and etc. i need to get a path for backup programmatically.Please help me.
Tamil